If no braking occurs, a total of how much power would be required to keep the railcar moving at 40 m/s

Answers

Answer 1

Answer:

40 kW

Explanation:

A railcar has a continuous 1000 N decelerating force any time it is in motion. If no braking occurs, how much power would be required to keep the railcar moving at 40 m/s

Solution:

Power in Physics is the rate of doing work and the work can be mechanical, electrical, etc. The S.I unit of power is the watts (W).

The power required to keep the car moving must match the work done by the friction force (decelerating force) that tends to slow down the railcar.

Work done = Force * displacement

Power = Work done / time = (Force * displacement) / time

Power = Force * (displacement / time)

Power = force * velocity = 1000 N * 40 m/s = 40000 W

Power = 40 kW


Related Questions

what is the direction of magnetic lines of force outside the magnet​

Answers

please mark me as brainiest p

Explanation:

Magnetic lines of force are closed curves. C) Outside the magnet their direction is from north pole to south pole and inside the magnet these are from south to north pole.

An aluminium block of mass 1 kg is heated by an electric heater for 3 minutes and a temperature rise of 15 °C is recorded. If the electric heater is connected to a voltmeter which gives a reading of 30 V and an ammeter which gives a reading of 2.5 A, calculate the specific heat capacity of the aluminium.​

Answers

Answer:

the specific heat capa city of the aluminium is 900 joules per kilogram per °C.

Am I right please?

what give negative acceleration ?

Answers

Answer:

But negative acceleration means that the rate of change of velocity is negative or velocity decreases. Example: (1) When we apply brakes in a moving car, then negative acceleration acts on it and the car stops. (2) When we throw a ball upwards, then also negative acceleration acts on it.

Explanation:

If it helps you mark me as a brainleast

MATHEMATICALLY A NEGATIVE ACCELERATION MEANS YOU WILL SUBTRACT FROM THE CURRENT VALUE OF THE VELOCITY.

what weight is recorded by a scale when it is placed inside a lift which is in free fall? Enplain.​

Answers

There is no pressure of your feet on the scales, and no pressure of the floor on the scales, so the scales will read zero I hope this is right

Answer:

Explanation:

There is no pressure of your feet on the scales, and no pressure of the floor on the scales, so the scales will read zero*. Hence, your weight, in a freely falling lift is zero

Which element has atoms with valence electrons in a higher energy level than those of calcium (Ca)?

(1 point)

oxygen (O)

lithium (Li)

bromine (Br)

cesium (Cs)

Answers

Lithium element contains one electron therefore valence electron will be one.  

The highest level of energy is due to valence electrons which are available to the atom.

The calcium has 2 valence electrons which has electrons with high energy.

These energy will be used by the electron during the chemical reaction, and they will either lose or gain valence electron.

Learn more at https://brainly.com/question/24373314

Answer:

calcium

Explanation:

2 electron

good morning how ya'll doing today

Answers

Answer:

good

Explanation:

Answer:

fine

Explanation:

make me as brainliast

A greater applied force is required to move an object with a greater mass than one with a smaller mass.
True
False

Answers

Answer:

True

Explanation:

The bigger an object is, the more force you must apply to move the object. Think about it like moving a mouse compared to moving an elephant. You can't move the elephant by yourself, because you don't have enough strength or force to move it. But, you can easily pick up a mouse, because it requires less force, or strength. Hope this helped :)

Answer:

I don't know

Explanation:

sorry but I will help u next time kk

3 An un calibrated mercury in glass thermometer immersed in melting ice. The length of the mercury thread is 25 mm when the thermometer immersed in steam from pure water boiling under a pressure of 1 atmosphere the length of the thread is 200 mm what is the temperature in degree centigrade when the length of the thread is 95mm.​

Answers

Answer:

25 mm = 0 deg C

200 mm = 100 deg C

200 - 25 = 175 = change in thread per 100 deg C

95 - 25 = 70 mm - change in thread from 0 deg C

70 / 175 * 100 = 40 deg C    final temperature at 95 mm

If a lever lifts a load four times the effort applied and effort distance is 5 times the load distance, calculate its efficiency​

Answers

Answer:

If effort distance was 4 times, efficiency would be 100%.

Since it takes 5 times for effort distance, efficiency drops to output/input

output is 1*F

input is (1/4*F)*5

so: F/1/5*F/4 = 4F/5F = .8 or 80%

The efficiency of the lever is 80%.

To calculate the efficiency of the lever, we can use the formula for mechanical advantage and efficiency.

Mechanical Advantage (MA) is the ratio of the load (L) to the effort (E) in a lever system:

MA = Load / Effort

Given that the load is four times the effort applied:

Load = 4 * Effort

Also, the effort distance (dEffort) is five times the load distance (dLoad):

dEffort = 5 * dLoad

Now, we can write the formula for efficiency (η) of a lever system:

Efficiency (η) = (Mechanical Advantage / Ideal Mechanical Advantage) * 100%

The Ideal Mechanical Advantage (IMA) is the ratio of the effort distance to the load distance:

IMA = dEffort / dLoad

Substitute the given values into the IMA equation:

IMA = (5 * dLoad) / dLoad

IMA = 5

Now, we can calculate the Mechanical Advantage (MA) using the relationship between the load and effort:

MA = Load / Effort

MA = (4 * Effort) / Effort

MA = 4

Finally, we can calculate the efficiency (η):

Efficiency (η) = (Mechanical Advantage / Ideal Mechanical Advantage) * 100%

η = (4 / 5) * 100%

η = 0.8 * 100%

η = 80%

The efficiency of the lever is 80%.

To know more about efficiency here

https://brainly.com/question/31458903

#SPJ2

A 2.0kg object is dropped from a height of 30m.
After it drops for 2.0 seconds, what is its kinetic
energy and what is its potential energy?
(Assume no air resistance.)

Answers

Answer:

1) The kinetic energy of the object after it drops for 2.0 seconds is approximately 384.9 Joules

2) The potential energy of the object after it drops for 2.0 seconds is approximately 204 J

Explanation:

1) The given mass of the object, m = 2.0 kg

The height from which the object is dropped, h = 30 m

The kinetic energy of the object after it drops for 2.0 seconds = Required

Kinetic energy, K.E. = (1/2)·m·v²

Where;

v = The velocity of the object

The kinematic equation for finding the velocity of the object is presented as follows;

v = u + g·t

Where;

u = The initial velocity of the object = 0

g = The acceleration due to gravity of the object ≈ 9.81 m/s²

t = The time of motion of the object = 2.0 seconds

∴ The velocity after 2 seconds, v ≈ 0 + 9.81 m/s² × 2 s = 19.62 m/s

The kinetic energy, K.E. after 2 seconds as the object drops is given as follows;

[tex]K.E._{(after \ two \ seconds)}[/tex] = (1/2) × 2.0 kg × (19.62 m/s)² = 384.9444 J ≈ 384.9 J

2) The total energy, M.E. of the object at the top, h = 30 m, u = 0, is given as follows;

The total mechanical energy, M.E. = P.E. + K.E.

M.E. = m·g·h + (1/2)·m·u²

∴ M.E. = 2.0 kg × 9.81 m/s² × 30 m + 0 = 588.6 J

M.E. = 588.6 J

Given that the total mechanical energy, M.E., is constant, we have;

At 2.0 seconds, M.E. = 588.6 J , K.E. ≈ 384.9 J, P.E. = M.E. - K.E.

∴ P.E. = 588.9 J - 384.9 J ≈ 204 J

The potential energy after it drops 2.0 seconds, P.E. ≈ 204 J

state and prove Newton's second law of motion ​

Answers

Answer:

HOPE IT HELP YOU A LOT :)

I prove it also .

Answer:

Newtons Second law of motion states that"The rate of change of momentum is directly proportional to the force applied"

If the force on a spring is 1 N and it stretched 0.5 m, what is the spring
constant?
A.4 N/m
B.0.2 N/m
C.2 N/m
D. 0.4 N/m

Answers

Force=F=1NStretched=x=0.5m

We know

[tex]\boxed{\sf Spring\:constant(K)=\dfrac{F}{x}}[/tex]

[tex]\\ \sf\longmapsto K=\dfrac{1}{0.5}[/tex]

[tex]\\ \sf\longmapsto K=2N/m[/tex]

convert 12 kg into gram​

Answers

Answer:

12000gram

Explanation:

1kg=1000gram

so, 12kg=12x1000

12kg=12000gram

Given amount=12kg

[tex]\boxed{\sf 1kg=1000g}[/tex]

[tex]\\ \sf\longmapsto 12kg=12(1000)[/tex]

[tex]\\ \sf\longmapsto 12kg=12000g[/tex]

2. a. in which principle does simple machine works? ​

Answers

Answer:

A simple machine uses a single applied force to do work against a single load force

Ignoring the friction losses. The work done on the load is equal to the work done with the applied energy. The machine can increase the amount of output power, with a corresponding drop in the distance transported by the load.

A plane mirror produces a _____.

virtual image
refracted image
real image

Answers

A plan Murrow produces a virtual image

Answer:

Explanation:

A plane mirror is the kind you look into when you look into a "regular" mirror. The image you see is right-side-up. These images are virtual. Real images are always upside down and are made by mirrors that are "parabolic" in shape. Virtual images are always right-side-up.

what is equal to 1 hector area

Answers

Answer:

Don't Forget To Follow, Brainliest, And Give Me Heart :)

Current is the movement of positive charges called electrons.
A. True
B. False
help pls <33

Answers

Answer:

False -> negative charge

Answer:

false

Explanation: electrons are negative charges

protons are positive charges

Which of the following is a vector quantity? i. Force ii. Velocity iii. Acceleration iv. All of these 5771​

Answers

All of these

Option ( iv ) is the correct answer.

Definition

A vector quantity the physical quantity that has both direction as well as magnitude.

A scientist studies how air blowing on plants affects their growth. He uses fans to create different amounts of wind and measures the growth of the plants. What would make this experiment more repeatable?

Answers

Answer:D.Keeping track of the exact amount of wind on each plant

Find out the name of metals which can be obtained from the following .a) argentite b)hematite c)chalcopryite d)bauxite e)calverite​

Answers

Answer:

a). Silver, Ag

b). Iron, Fe

c). Copper, Cu

d). Aluminium, Al

e). Gold, Au

Why does a ship float on water when it weighs about 100tones and why a stone of less than a kg sinks

Answers

Answer with Explanation:

Let me answer this in a simple way, since the density of stone is greater than that of water, the stone sinks as the weight of the stone is greater than the weight of water displaced by it. But the ship is designed in such a way that the relative density of the ship always becomes less than that of water. Therefore, the weight of the water displaced becomes equal to the total weight of the ship and thus it floats.

There are many other ways to explain this but this should give you the general idea.

Muốn đun sôi 200g nước từ 30 độ cần cung cấp nhiệt lượng bao nhiêu :

Answers

Answer:

cần cung cấp 70 độ vì nước sôi ở 100°C

Explanation:

Which of the following is occurring while a satellite is in orbit around Earth? O It is continuously pulling away from Earth It is continuously falling toward the surface of Earth. It stays in a constant speed orbit where it was oriented from the start. It stays in the same orbit orientation traveling at variable speeds.​

Answers

AnswerIt is continuously falling towards the surface of the earth

Explanation:

since gravity from earth is the thing that keeps it constantly in orbit

To what height, h, would the pendulum bob rise after a single swing if it was being released from the height of 0.80 m

Answers

Answer:

0.80 m

Explanation:

Neglecting friction, the total mechanical energy of the pendulum is constant.

E = K + U where K = kinetic energy and U = potential energy.

At its release point of 0.80 m, the pendulum bob has a mechanical energy which is equal to its potential energy, since, its initial kinetic energy is zero. By the time the bob swings to the other end, it has a mechanical energy equal to it initial potential energy since total energy is conserved.

Neglecting friction, the pendulum bob would swing back to its original height of 0.80 m since the total mechanical energy is conserved and at its highest point, it is purely potential energy.

So, the height the pendulum bob swings to after release from a height of 0.80 m neglecting fiction is 0.80 m.

An object is thrown with velocity 7.1 m s-1 vertically upwards on the Moon. The
acceleration due to gravity on the Moon is 1.62 ms? What is the time taken for the object to return to its starting point?
A 3.5 s
B 4.4 s
C 6.5 s
D 8.8 s

Answers

Answer:D

Explanation:

For problems 2-3, a Ferrari accelerates from 0-60.0 miles per hour in 2.50 seconds.
2. What is its final speed, in m/s?
a 5.6 m/s
b. 13 m/s
c. 26.8 m/s
d. 1608 m/s
0-60.0 per near
2.50 seconds
3. What is its average acceleration?
a. 24.0 m/s
b. 10.7 m/s2
c. 38.6 m/s2
d. 13 m/s

Answers

Answer:

Explanation:

The first part of this question is simply asking us to convert the speed from miles per hour to meters per second:

[tex]60.0\frac{mi}{hr}*\frac{1hr}{3600sec}*\frac{1609.34m}{1mi}=26.8\frac{m}{s}[/tex] choice C.

The next part wants us to use the equation for acceleration and find the acceleration:

[tex]a=\frac{v-v_0}{t}[/tex] where v is final velocity, v0 is initial velocity, and t is time in seconds (which was one of the reasons we had to convert the initial velocity from 60.0 mph to m/s):

[tex]a=\frac{26.8-0}{2.5}[/tex] and

a = 10.7 m/s/s, choice B.

Which of the following is required for photosynthesis to take place?

a.

sugar

b.

oxygen

c.

ATP

d.

water



Please select the best answer from the choices provided


A

B

C

D

please answer as quickly as possible

Answers

Answer:

D. water

Explanation:

sugar ( glucose ) and oxygen are bi-products

Answer:

(d) water

Explanation:

water is required for photosynthesis to take place .

sugar , oxygen , ATP are not required to take place in photosynthesis.

please answer me fast ​

Answers

Answer: i think c

Explanation:QA: “What is ordinary glass made of ?”

Glass is mostly silica, or silicon dioxide, present as quartz in many types of sand. Pure silica forms a highly transparent glass, but has a very high melting or softening temperature, around 1700°C. Even at such high temperatures it is highly viscous and difficult to work. Its use is largely confined to applications requiring high transparency to ultra-violet and infra-red radiation, stability at elevated temperatures or low thermal expansion coefficient.

“Ordinary glass” windows and drinking vessels are typically made from soda-lime glass, containing silica with around 25% sodium, calcium and other oxides, which together reduce the softening temperature to roughly 500–600°C

Solar energy is a clean, renewable energy source. It is expensive to build a solar plant, but there is no fuel cost only maintenance. Why does solar energy not play a bigger role in energy production today?

Answers

Answer:

Energy production requires the setting up of a complete interconnected chain from generation of energy from the root source of the energy to the storage of the generated energy and the eventual utilization of the energy when required

Solar energy, indirectly, continues to be the main source of energy, however, the direct use of solar energy to power the systems we use in our everyday life, require the development of technologies, such as high efficiency solar cells, means of energy storage, and compatible efficient energy usage which are industrial areas that are seeing good progress but in which the current developed equipment are expensive to produce, and  due to their efficiency, are undergoing further research and development

Therefore, due to the continuous increasing improvement in solar technology which can observed, the use of the produced energy through solar is evolving, and therefore, will continue to play a continuously increasing but lower role compared to other sources of energy which have been developed to satisfactory level that can drive an industry, considering the financial investment involved

Explanation:

during a journey, a car travels at 40 km in 2.5 hours, next 62 km in 3 hours, then took a break for 30 minutes, again travelled the last 120 km in 3.2 hours. calculate the average speed of the car during the journey.

Answers

45mph is the answer if you do the math right
Other Questions
Good evening everyone Help me i n my hw ,The wall of cinema hall are covered with sound absorbing materials. Why?Answer it ASAP.Good day -2x + 8 = -26plz help!!!!!!!!!!!!! Ahmad is working on his stress-management skills. As he reflects on the day's events, he notices several daily hassles that rank high on his perceived stress level. Ahmad wants to work on dealing with his daily hassles because they can contribute to a general decrease in ______. who would. be considered part of a. highly susceptible. population You are testing the claim that the proportion of men who own cats is larger than the proportion of women who own cats. You sample 170 men, and 70% own cats. You sample 190 women, and 40% own cats. Find the proportion of the pooled samples, ( p c pc ), as a decimal, rounded to two decimal places. Example of a situation by thinking regularly vs critically 25 POINTS!!!!!! WILL GIVE BRAINLIEST!!!!! Select all the correct answers.Which statements regarding the implications of the central limit theorem are true?As the number of sample means decreases, the means get closer to a standard normal distribution.For an infinite number of samples, 99.7% of the sample means would fall within the interval .The central limit theorem holds true only for populations that are normally distributed.For an infinite number of samples, 95% of the sample means would fall within the interval .The mean of the population is the same as the mean of any sample taken from the population.If the population is normally distributed, then the mean of a sample from that population will be normally distributed. What is the domain of the function shown in the table?X-2-101y0123A. (-2,-1,0,1,2,3)B. {-2, -1,0,1)C. {0, 1, 2, 3)D. (-2, 0),(-1,1),(0, 2), (1,3) If the Dow Jones Industrial Average is 3.2% down that means that: Question 10 options: The stocks of all the companies in Dow Jones lost 3.2% of their value. The average value of the 30 blue chip stocks is down by 3.2%. the average of the stocks value of the top 500 companies in the U.S. decreased in value by 3.2% It does not have anything to do with the stock market. Chameleons catch insects with their tongues, which they can rapidly extend to great lengths. In a typical strike, the chameleon's tongue accelerates at a remarkable 220 m/s^2 for 20 msms, then travels at constant speed for another 30 ms. Required:During this total time of 50 ms, 1/20 of a second, how far does the tongue reach? Is backbonding is possible in BF4- ? If no then why? 4. How does untouchability weaken our country? An ice cube, measured at 260 Kelvin, is dropped into a cup of tea that is 350 Kelvin. The temperature of the tea is recorded every 30 seconds and shows the temperature dropping for 4 minutes. After 4 minutes the temperature stays steady at 300 Kelvin. What is this called?A. Thermal equilibriumB. Specific heat capacityC. Latent heatD. Temperature transfer define uniform and non-uniform velocity. How much acceleration is produced on an object at uniform motion, why? Pls answer my question anyone pls! Many businesses today are abandoning traditional business attire and allowing their employees to come to work in business casual that typically does not include ties, cufflinks, or business suits. There has been a decrease in the sale of silk ties as a result of this cultural trend. A decrease in consumer demand for silk ties has led to a decrease in demand for silk because the demand for silk is ________. IT was in Dalat ________i met my old friend HELP PLEASE ! it keep saying its wrong What are the major economic activities in Sierra Leone un automovil que viaja a 70 km/h a lo largo de un camino recto y plano se detiene uniformemente en una distancia de 80m. si el automovil pesa 8500 N. que fuerza se necesita para detener al automovil? Can i study law after 10 in nepal ?