Answer:
nope don't think so
Explanation:
the heat causes the molecules to move faster therefore expanding in watever it the air is in
Answer:
If the pressure is maintained at a constant value then both statements are equivalent:
P V = n R T Ideal gas equation
if P, n, and R are maintained at constant values then
V = T and the two expressions are equivalent
A projectile is launched at ground level with an initial speed of 49.5 m/s at an angle of 40.0° above the horizontal. It
strikes a target above the ground 3.50 seconds later. What are the x and y distances from where the projectile was
launched to where it lands?
x distance
m
y distance
m
Answer:
x = 132.7 m
y = 51.34 m
Explanation:
Given :
Initial speed, u = 49.5 m/s²
Angle of projection, θ = 40°
Time, t = 3.50 seconds
The distance, x = horizontal component ;
Distance = speed * time
Distance = uCosθ * 3.50
Distance = 49.5 * Cos40° * 3.50
Distance = 49.5 * Cos40° * 3.50
Horizontal distance = 132.7 m
Vertical distance, y :
Sy = ut + 1/2gt²
Sy = Vertical distance ; g = 9.8 m/s²
Sy = 49.5 * sin40 * 3.5 - (0.5 * 9.8 * 3.5²)
Sy = 111.36295 - 60.025
Sy = 51.33795 m
x = 132.7 m
y = 51.34 m
When using the process of evaporation to separate a mixture what is left behind to an evaporating dish
A. The mixture does not separate in the entire mixture remains in the dish
B. The liquid evaporates in the solid is left in the dish
C. The mixture does not separate in the entire mixture evaporates
D. None of these
Answer:
B
Explanation:
The liquid evaporates in the solid is left in the dish..
A car of mass 500 kg is moving at a speed of 1.2 m/s. A man pushes the car,
increasing the speed to 2 m/s. How much work did the man do?
A. 640 J
B. 360 J
C. 1360 J
D. 1000 J
Work done by man will be A. 640 J
What is work energy theorem?
The work-energy theorem states that the net work done by the forces on an object equals the change in its kinetic energy.
according to work energy theorem
Work done = final Kinetic energy - initial kinetic energy
= KE (final) - KE (initial )
= 1/2 m ([tex]v^{2}[/tex]) - 1/2 m ([tex]u^{2}[/tex])
= 1/2 m ([tex]v^{2}[/tex] - [tex]u^{2}[/tex])
= 1/2 * 500 * ( [tex]2^{2}[/tex] - [tex]1.2^{2}[/tex])
= 250 * 2.56 = 640 J
correct answer is A. 640 J
learn more about work energy theorem
https://brainly.com/question/10063455?referrer=searchResults
#SPJ2
A 1,500-kg truck has a net force of 4,200 N acting on it . What is the trucks' acceleration
Answer:
2.8 m/s²Explanation:
The acceleration of an object given it's mass and the force acting on it can be found by using the formula
[tex]a = \frac{f}{m} \\ [/tex]
f is the force
m is the mass
From the question we have
[tex]a = \frac{4200}{1500} = \frac{42}{15} \\ = 2.8[/tex]
We have the final answer as
2.8 m/s²Hope this helps you
The length of a cylindrical axon is 8 cm and its radius of 8μm,and the thickness of the membrane is 0.01μm,dielectric constant ( ε=24.78x10-12 F/m),the capacitance of nerve cell is
Answer:
9.965 nF
Explanation:
The capacitance of the axon C = εA/d where ε = dielectric constant = 24.78 × 10⁻¹² F/m, A = surface area of axon = 2πrL where r = radius of axon = 8 μm = 8 × 10⁻⁶ m and L = length of axon = 8 cm = 8 × 10⁻² m and d = thickness of membrane = 0.01 μm = 0.01 × 10⁻⁶ m
So, C = εA/d
C = ε2πrL/d
Substituting the of the values variables into the equation, we have
C = ε2πrL/d
C = 24.78 × 10⁻¹² F/m × 2π × 8 × 10⁻⁶ m × 8 × 10⁻² m/0.01 × 10⁻⁶ m
C = 9964.63 × 10⁻²⁰ Fm/0.01 × 10⁻⁶ m
C = 996463 × 10⁻¹⁴ F
C = 9.96463 × 10⁻⁹ F
C = 9.96463 nF
C ≅ 9.965 nF
Choose the CORRECT statements. A standing wave is resulted from the superposition of
two waves in such a way both waves:
I. have the same direction.
II. are opposite in direction.
III. have the same frequency.
IV. have different frequency.
V. have the same amplitude.
VI. have different amplitude
A. I, III and V
B. II. IV and VI
C. I, IV and V
D. II, III and V
E I and III
F. Ill and V
Answer:
The answer is D
Lightning can be studied with a Van de Graaff generator, which consists of a spherical dome on which charge is continuously deposited by a moving belt. Charge can be added until the electric field at the surface of the dome becomes equal to the dielectric strength of air. Any more charge leaks off in sparks. Assume the dome has a diameter of 25.0 cm and is surrounded by dry air with a "breakdown" electric field of 3.00 10^6 V/m.
Required:
a. What is the maximum potential of the dome?
b. What is the maximum charge on the dome?
Answer:
(a) V = 3.75 x 10^5 V
(b) q = 5.2 x 10^-6 C
Explanation:
Diameter, d = 25 cm
radius, r = 12.5 cm = 0.125 m
Electric field, E = 3 x 10^6 V/m
(a) The maximum potential is given by
[tex]V = E \times r \\\\V = 3\times 10^6\times 0.125\\\\V = 3.75\times10^5 V[/tex]
(b) The charge is given by
[tex]V = \frac{k q}{r}\\\\3.75\times10^5=\frac{9\times10^9\times q}{0.125}\\\\q = 5.2\times 10^{-6} C[/tex]
Calculate the forces that the supports \rm A and \rm B exert on the diving board shown in when a 58-\rm kg person stands at its tip.
Find the uncertainty in a calculated electrical potential difference from the measurements of current and resistance. Electric potential difference depends on current and resistance according to this function V(I,R) = IR. Your measured current and resistance have the following values and uncertainties I = 5.9 Amps, delta I space equals space 0.4 Amps and R = 42.7 Ohms and delta R space equals space 0.6 Ohms. What is the uncertainty in the , delta V ? Units are not needed in your answer.
Answer:
ΔV = 2 10¹ V
Explanation:
The calculation of the uncertainty or error in an expression is given by
ΔV = [tex]\frac{dV}{di}[/tex] |Δi| + [tex]\frac{dV}{dR}[/tex] |ΔR |
V = i R
let's make the derivatives
[tex]\frac{dV}{di}[/tex] = R
[tex]\frac{dV}{dR}[/tex] = i
we substitute
ΔV = R | Δi | + i | ΔR |
in the exercise give the values
i = (5.9 ± 0.4) A
R = (42.7 ± 0.6) Ω
we calculate
ΔV = 42.7 0.4 + 5.9 0.6
ΔV = 20.6 V
ΔV = 2 10¹ V
the voltage is
V = i R
V = 5.9 42.7
V = 251.9 V
the result is
V = (25 ± 2) 10¹ V
Question 18/55 (2 p.)
A vibrating object produces ripples on the surface of a liquid. The object completes 20 vibrations
every second. The spacing of the ripples, from one crest to the next, is 3.0 cm.
What is the speed of the ripples?
D
C 60 cm/s
120 cm/s
A 0.15cm/s
B 6.7 cm/s
Answer:
the correct answer is C v = 60 cm / s
Explanation:
The speed of a wave is related to the frequency and the wavelength
v = λ f
They indicate that the object performs 20 oscillations every second, this is the frequency
f = 20 Hz
the wavelength is the distance until the wave repeats, the distance between two consecutive peaks corresponds to the wavelength
λ = 3 cm = 0.03 m
let's calculate
v = 20 0.03
v = 0.6 m / s
v = 60 cm / s
the correct answer is C
You have a simple pendulum that oscillates with a period of 2 s as you stand on the surface of Earth. Your friend, an astronaut standing on the surface of the Moon, has a pendulum of the same length. What would be the period of oscillation of your friend’s pendulum?
a. Less than 2 s
b. The answer depends on whether the amplitudes are the same
c. More than 2 s
d. Exactly 2 s
Answer:
c. More than 2 s
Explanation:
First, we will find the length of the pendulum:
[tex]T = 2\pi \sqrt{\frac{l}{g}}\\\\2\ s = 2\pi \sqrt{\frac{l}{9.81\ m/s^2}}\\\\4\ s^2 = 4\pi^2 (\frac{l}{9.81\ m/s^2})\\\\l = \frac{(4\ s^2)(9.81\ m/s^2)}{4\pi^2} \\\\l = 0.99\ m[/tex]
Now, the value of g becomes 1.625 m/s² on the surface of the moon. So the time period will be:
[tex]T = 2\pi \sqrt{\frac{l}{g}}\\\\T = 2\pi \sqrt{\frac{0.99\ m}{1.625\ m/s^2}}\\\\[/tex]
T = 4.9 s
Therefore, the correct option is:
c. More than 2 s
How is wind generated?
O A. Air molecules move from areas of low pressure to areas of high
pressure.
O B. Air molecules move more slowly where the temperature is higher
and the pressure is lower.
C. Air molecules move more quickly where the temperature is lower
and the pressure is higher.
D. Air molecules move from areas of high pressure to areas of low
pressure.
Answer:
Explanation:
Wind is caused by the uneven heating of the atmosphere by the sun, variations in the earth's surface, and rotation of the earth. ... Wind turbines convert the energy in wind to electricity by rotating propeller-like blades around a rotor. The rotor turns the drive shaft, which turns an electric generator
HELP PLSS I CANT FAIL!!!
Elements from Period 3 of the periodic table are highlighted. Which element
is a metalloid?
A. Sodium
B. Argon
C. Sulfur
D. Silicon
Answer:
Explanation:
Look at the color scheme. That will help you a lot.
The metals are Na Mg and Al. They are colored Blue.
The Non metals are colored yellow.
Seven of the eight entries are taken up by yellow or blue. There is only 1 element left over and that is Si. So it must the metalloid. It has properties of the both the metals and the non metals.
Answer: silicon
Explanation:
____________is obtained from the fleece of animals.
Answer:
wool and fibers
Explanation:
Describes the relationship between the free energy change, the reaction quotient, and the equilibrium constant.
Explanation:
Reaction quotient is defined as the ratio of the concentration of the products and reactants of a reaction at any point of time with respect to some unit. It is represented by the symbol Q.
The ratio of the concentration of products and reactants of a reaction in equilibrium with respect to some unit is said to be equilibrium constant expression. It is represented by the symbol K.
The relationship between Gibbs free energy change and reaction quotient of the reaction is:
[tex]\Delta G=\Delta G^o+RT ln Q[/tex] ......(1)
where,
[tex]\Delta G[/tex] = Gibbs free energy change
[tex]\Delta G^o[/tex] = Standard Gibbs free energy change
R = Gas constant
T = Temperature
At equilibrium, the free energy change of the reaction becomes 0 and standard Gibbs free energy change can be related to the equilibrium constant by the equation:
[tex]\Delta G^o=-RT ln Q[/tex] ...(2)
Assuming the earth is a uniform sphere of mass M and radius R, show that the acceleration of fall at the earth's surface is given by g = Gm/R2 . What is the acceleration of a satellite moving in a circular orbit round the earth of radius 2R
Explanation:
The weight of an object on the surface of the earth is equal to the gravitational force exerted by the earth on the object.
[tex]W=F_G[/tex]
[tex]mg = G \dfrac{mM}{R^2}[/tex]
which gives us an expression for the acceleration due to gravity g as
[tex]g = G\dfrac{M}{R^2}[/tex]
At a height h = R, the radius of a satellite's orbit is 2R. Then the acceleration due to gravity [tex]g_h[/tex] at this height is
[tex]mg_h = G \dfrac{mM}{(2R)^2}= G \dfrac{mM}{4R^2}[/tex]
Simplifying this, we get
[tex]g_h= G \dfrac{M}{4R^2} = \dfrac{1}{4} \left(G \dfrac{M}{R^2} \right) = \dfrac{1}{4}g[/tex]
a system absorb 500 J of heat and the same time 400J of work is done one the system find change in internal enery ?
Answer:
+ 900 J
Explanation:
Since the total energy change ΔE = internal energy change ΔU since there is no change in kinetic and potential energy,
ΔE = ΔU
ΔE = Q - W where Q = heat absorbed by system and W = work done by system
Now since the system absorbs 500 J of heat, Q = + 500 J and work of 400 J is done on the system, W = -400 J
So, the values of the variables into the equation, we have
ΔE = Q - W
ΔE = + 500 J - (-400 J)
ΔE = + 500 J + 400 J
ΔE = + 900 J
So, the internal energy change, ΔE = + 900 J
define force and types of force
Answer:
Force is the strength or weight of things that depends on movement. The types of forces are conteact force, spring force, applied force, air resistance force, normal force, frictional force, tension force, and non-contact force.
A 15-cm-focal-length converging lens is 19 cm to the right of a 6.0-cm-focal-length converging lens. A 1.0-cm-tall object is distance L to the left of the 6.0-cm-focal-length lens.
Required:
For what value of L is the final image of this two-lens system halfway between the two lenses?
Answer:
L = 11.014 cm
Explanation:
Halfway between the two lenses is 19/2 = 9.5 cm.
Thus, this means virtually with respect to lens, the final image is at -9.5 cm
Thus, from here, we will work this out backwards.
Let's first solve for the initial position of the object for the second lens;
(1/S2) + (1/s'2) = (1/f2)
Where s'2 is the real image.
F2 is focal length
Thus;
(1/s'2) = (1/f2) - (1/s2)
(1/s'2) = (1/15) - (1/-9.5)
(1/s'2) = 0.1719
s'2 = 5.82 cm
The object for the second lens is located at 5.82 cm in front of the second lens.
Now, The object for the second lens and the image for the first lens will be the same.
This means the distance of the image from the first lens is at; 19 - 5.82 = 13.18 cm.
Now let's solve for the object distance of the first lens which will be denoted by L.
1/L = (1/f1) + (1/s'1)
Where f1 = 6 cm
1/L = (1/6) - (1/13.18)
1/L = 0.090794
L = 1/0.090794
L = 11.014 cm
While a mason was working concrete into formwork, the formwork collapses. Who is BEST suites to rectify this problem? Mason Carpenter Project Manager O Construction Technician A device made in a workplace had defects. To address this issue the workshop manager should communicate directly with the workshop
Answer:
1. Carpenter
2. True
Explanation:
While a mason was working concrete into the formwork, the formwork collapses. The best person to rectify this problem is CARPENTER.
This is because it is the job of the Carpenter to design and build formwork, most especially wooden formwork. Formwork is like casing built to receive concrete and reinforcement during construction. Hence, when formwork collapses either due to stress, tension, or improper construction, it is the job of Carpenter to reconstruct the formwork or rectify the problem.
It is TRUE that when a device made in a workplace had defects. To address this issue the workshop manager should communicate directly with the workshop. However, this communication will be an instruction on what to do next, and it usually directs those responsible to take action where necessary. For example, a workshop manager communicates to a carpenter about the need to rectify a chair or table that has a defect.
Rahul sits in a chair reading a book. Which force is equal to the force Rahul exerts on Earth?
Answer:
Rahul's weight
Explanation:
In fact, the force Rahul exerts on Earth corresponds to the force of gravity. But Rahul's weight is, in fact, the force of gravity exerted by the Earth on Rahul, and these two forces correspond to the action-reaction pair of Newton's third law, which states that the two forces are equal.
Using formulas, Rahul's weight is equal to
W=mg
where m is Rahul mass and g is the gravitational acceleration (g=9.81 m/s^2).
A 50 g copper calorimeter contains 250 g of water at 20 C. How much steam be condensed into the water to make the final temperature of the system 50 C. ( specific heat water= 4200 J/Kg C , specific heat copper= 390 J/Kg C
Answer:
Approximately [tex]13\; \rm g[/tex] of steam at [tex]100\; \rm ^\circ C[/tex] (assuming that the boiling point of water in this experiment is [tex]100\; \rm ^\circ C\![/tex].)
Explanation:
Latent heat of condensation/evaporation of water: [tex]2260\; \rm J \cdot g^{-1}[/tex].
Both mass values in this question are given in grams. Hence, convert the specific heat values from this question to [tex]\rm J \cdot g^{-1}[/tex].
Specific heat of water: [tex]4.2\; \rm J \cdot g^{-1}\cdot \rm K^{-1}[/tex].
Specific heat of copper: [tex]0.39\; \rm J \cdot g^{-1}\cdot K^{-1}[/tex].
The temperature of this calorimeter and the [tex]250\; \rm g[/tex] of water that it initially contains increased from [tex]20\; \rm ^\circ C[/tex] to [tex]50\; \rm ^\circ C[/tex]. Calculate the amount of energy that would be absorbed:
[tex]\begin{aligned}& Q(\text{copper}) \\ =\;& c \cdot m \cdot \Delta t \\ =\;& 0.39\; \rm J \cdot g^{-1}\cdot K^{-1} \times 50\; \rm g \times (50\;{\rm ^\circ C} - 20\;{\rm ^\circ C}) \\ =\; & 585\; \rm J \end{aligned}[/tex].
[tex]\begin{aligned}& Q(\text{cool water}) \\ =\;& c \cdot m \cdot \Delta t \\ =\;& 4.2\; \rm J \cdot g^{-1}\cdot K^{-1} \times 250\; \rm g \times (50\;{\rm ^\circ C} - 20\;{\rm ^\circ C}) \\ =\; & 31500\; \rm J \end{aligned}[/tex].
Hence, it would take an extra [tex]585\; \rm J + 31500\; \rm J = 32085\; \rm J[/tex] of energy to increase the temperature of the calorimeter and the [tex]250\; \rm g[/tex] of water that it initially contains from [tex]20\; \rm ^\circ C[/tex] to [tex]50\; \rm ^\circ C[/tex].
Assume that it would take [tex]x[/tex] grams of steam at [tex]100\; \rm ^\circ C[/tex] ensure that the equilibrium temperature of the system is [tex]50\; \rm ^\circ C[/tex].
In other words, [tex]x\; \rm g[/tex] of steam at [tex]100\; \rm ^\circ C[/tex] would need to release [tex]32085\; \rm J[/tex] as it condenses (releases latent heat) and cools down to [tex]50\; \rm ^\circ C[/tex].
Latent heat of condensation from [tex]x\; \rm g[/tex] of steam: [tex]2260\; {\rm J \cdot g^{-1}} \times (x\; {\rm g}) = (2260\, x)\; \rm J[/tex].
Energy released when that [tex]x\; {\rm g}[/tex] of water from the steam cools down from [tex]100\; \rm ^\circ C[/tex] to [tex]50\; \rm ^\circ C[/tex]:
[tex]\begin{aligned}Q = \;& c \cdot m \cdot \Delta t \\ =\;& 4.2\; {\rm J \cdot g^{-1}\cdot K^{-1}} \times (x\; \rm g) \times (100\;{\rm ^\circ C} - 50\;{\rm ^\circ C}) \\ =\; & (210\, x)\; \rm J \end{aligned}[/tex].
These two parts of energy should add up to [tex]32085\; \rm J[/tex]. That would be exactly what it would take to raise the temperature of the calorimeter and the water that it initially contains from [tex]20\; \rm ^\circ C[/tex] to [tex]50\; \rm ^\circ C[/tex].
[tex](2260\, x)\; {\rm J} + (210\, x)\; {\rm J} = 32085\; \rm J[/tex].
Solve for [tex]x[/tex]:
[tex]x \approx 13[/tex].
Hence, it would take approximately [tex]13\; \rm g[/tex] of steam at [tex]100\; \rm ^\circ C[/tex] for the equilibrium temperature of the system to be [tex]50\; \rm ^\circ C[/tex].
What is the potential energy of a 7kg object 4m off the ground ?
please show your work
Answer:
Gravitational potential energy is mass of the object times the gravitational constant times the height of the object:
U = mgh (I will use 10 for the gravitational constant but you can use 9.8 or 9.81 or something even more accurate)
U = 280
The gravitational potential of the object is 280 joules
HELP ME PLS!!!!
Find the location of beryllium (Be) on the periodic table. What type of ion will
beryllium form?
A. An ion with a -2 charge
B. An ion with a +6 charge
C. An ion with a +2 charge
D. An ion with a -6 charge
Answer:
the answer is c which is a+2 charge
Explanation:
Beryllium is in group 2A. It's nearest noble gas is Helium, which is 2 elements behind Beryllium. ThBeryllium wants to lose two electrons. When it does that, Beryllium will have a positive chargeof two, and it will be stated as B-e two plus.
The Beryllium (Be) has an atomic number of 4 and belongs to Group-2 elements. The Beryllium will form a divalent cation (+2). Thus, option C is correct.
What are cations and anions?In an atom, the number of electrons equals the number of protons. If the electrons are removed from the atom or the electrons are added to the atom, the atom has an excessive positive or negative charge.
This excessive of electrons or lack of electrons forms Ions. The excess of electrons has a negative charge or anions and the lack of electrons has a positive charge or cations.
Beryllium has 4 electrons. Two electrons are occupied in the valence shell of beryllium. Group 2 elements always form the positive ions or cations, to become stable ions.
The outermost shell of beryllium has two electrons. In order to form a stable ion, beryllium should lose its two electrons or gain six electrons. Beryllium belongs to the Group-2 element, it always loses two electrons and forms Be²⁺, to form a stable ion.
Hence, Beryllium forms an ion with a +2 charge. Thus, the correct option is C.
To learn more about the Cations and Anions:
https://brainly.com/question/980691
#SPJ5
A peach pie in a 9.00 in diameter plate is placed upon a rotating tray. Then, the tray is rotated such that the rim of the pie plate moves through a distance of 208 in. Express the angular distance that the pie plate has moved through in revolutions, radians, and degrees.
Answer:
a) [tex]X_1=7.36rev[/tex]
b) [tex]X_2=46.22radians[/tex]
c) [tex]X_3=2649.6^o[/tex]
Explanation:
From the question we are told that:
Diameter [tex]d=9.00[/tex]
Distance [tex]x=208[/tex]
Generally the equation for circumference of a circle is mathematically given by
[tex]C=2 \pi r\\\\C=2*\pi*4.5[/tex]
[tex]C=28.3[/tex]
Therefore
Angular distance that the pie plate has moved through in revolutions is
[tex]X_1=\frac{x}{C}[/tex]
[tex]X_1=\frac{208}{28.3}[/tex]
[tex]X_1=7.36rev[/tex]
Generally Angular distance that the pie plate has moved through in radians is
[tex]X_2= 7.36rev* 2 \pi[/tex]
[tex]X_2=46.22radians[/tex]
Generally Angular distance that the pie plate has moved through in degrees is
[tex]X_3=7.36rev* 360[/tex]
[tex]X_3=2649.6^o[/tex]
Normal conversation has a sound level of about 60 dB. How many times more intense must a 10,000-Hz sound be compared to a 1000-Hz sound to be perceived as equal to 60 phons of loudness
Answer: A 10,000-Hz sound is 10 times more intense as compared to a 1000-Hz sound to be perceived as equal to 60 phons of loudness.
Explanation:
The formula used is as follows.
[tex]\beta = 10 dB log (\frac{I}{I_{o}})\\60 = 10 dB log (\frac{I}{I_{o}})[/tex]
[tex]I_{o} = 10^{-12}[/tex] normal threshold
The difference is sound level is as follows.
60 - 60 = 0
Hence,
[tex]0 = 10 dB [log (\frac{I_{f}}{I_{o}}) - log (\frac{I_{i}}{I_{o}})]\\log (\frac{1000}{I_{o}}) = log (\frac{10000 x}{I_{o}})\\log (10^{15}) = log (10^{16}x)\\15 = 16 + log x\\log x = 1\\x = 10[/tex]
This means that 10,000 Hz sound is 10 times more intense.
Thus, we can conclude that a 10,000-Hz sound is 10 times more intense as compared to a 1000-Hz sound to be perceived as equal to 60 phons of loudness.
A frequently quoted rule of thumb in aircraft design is that wings should produce about 1000 N of lift per square meter of wing. (The fact that a wing has a top and bottom surface does not double its area.) (a) At takeoff the aircraft travels at 63.0 m/s, so that the air speed relative to the bottom of the wing is 63.0 m/s. Given the sea level density of air to be 1.29 kg/m3, how fast (in m/s) must it move over the upper surface to create the ideal lift
Answer:
v₂ = 63.62 m / s
Explanation:
For this exercise in fluid mechanics we will use Bernoulli's equation
P₁ + ρ g v₁² + ρ g y₁ = P₂ + ρ g v₂² + ρ g y₂
where the subscript 1 refers to the inside of the wing and the subscript 2 to the top of the wing.
We will assume that the distance between the two parts is small, so y₁ = y₂
P₁-P₂ = ρ g (v₂² - v₁²)
pressure is defined by
P = F / A
we substitute
ΔF / A = ρ g (v₂² - v₁²)
v₂² = [tex]\frac{\Delta F}{A \ \rho \ g} + v_1^2[/tex]
suppose that the area of the wing is A = 1 m²
we substitute
v₂² = [tex]\frac{1000}{1 \ 1.29 \ 9.8} + 63^2[/tex]
v₂² = 79.10 + 3969
v₂ = √4048.1
v₂ = 63.62 m / s
The wavelength of visible light range of 400 to 750mm .what is the corresponding range of photon energies for visible light
Answer:
The range of the photon energies is between:
2.652 x 10⁻²⁵ J to 4.973 x 10⁻²⁵ J
Explanation:
The energy of a photon is calculated using the following equation;
E = hf
where;
h is Planck's constant = 6.63 x 10⁻³⁴ Js
f is frequency of the photon
[tex]E = h \frac{c}{\lambda} \\\\where;\\\\\lambda \ is \ the \ wavelength\\\\c \ is \ the \ speed \ of \ light \ = 3\times 10^8 \ m/s\\\\When \ \lambda = 400 \ mm = 400 \ \times 10^{-3} \ m\\\\E = \frac{(6.63 \times 10^{-34})(3\times 10^8)}{400 \times 10^{-3}} \\\\E = 4.973 \times 10^{-25} \ J[/tex]
[tex]When \ \lambda = 750 \ mm = 750 \ \times 10^{-3} \ m\\\\E = \frac{(6.63 \times 10^{-34})(3\times 10^8)}{750 \times 10^{-3}} \\\\E = 2.652 \times 10^{-25} \ J[/tex]
The range of the photon energies is between:
2.652 x 10⁻²⁵ J to 4.973 x 10⁻²⁵ J
A person is driving a car down a straight road. The instantaneous acceleration is constant and in the direction of the car's motion. 1) The speed of the car is increasing. decreasing. constant. increasing but will eventually decrease. decreasing but will eventually increase.
Answer:Increasing
Explanation:
Given
Car is driven on the straight road with instantaneous acceleration in the direction of car's motion.
If instanateneous acceleration is constant then speed of car is increasing at a constant pace. As there are no turns on the road, therefore speed of car is increasing.
The speed of the car is "decreasing". A further description is provided in the below paragraph.
It's because the individual would be in a straightforward fashion. This same acceleration inclination comes contrary to the movement of the automobile. It indicates that it exerts pressure against the movement of the automobile. So, when it moves forward, the speed of the automobile decreases.
Thus the above answer is correct.
Learn more about the speed here:
https://brainly.com/question/5053192
3. What is electric current?
The flow of moving electrons
electrons that move one time
Answer:
An electric current is a stream of charged particles, such as electrons or ions, moving through an electrical conductor or space. It is measured as the net rate of flow of electric charge through a surface or into a control volume. ... In electric circuits the charge carriers are often electrons moving through a wire.
Answer:
The flow of moving electrons
