If you increase the aperture diameter of a camera by a factor of 3, the intensity of the light striking the film is affected and increases by a factor of 9. Hence, option (c) aligns well with the answer.
To understand why, we need to look at how the aperture diameter affects the amount of light entering the camera.
The aperture is the opening in the lens that controls the amount of light passing through.
A larger aperture diameter allows more light to enter the camera.
The intensity of light is directly proportional to the amount of light hitting a surface. In this case, the film inside the camera is the surface that the light is striking.
When the aperture diameter is increased by a factor of 3, the area of the aperture (which is proportional to the diameter squared) increases by a factor of 9.
Since the same amount of light is spread over a larger area, the intensity of the light striking the film increases by a factor of 9. Therefore, the correct answer is (c) It increases by a factor of 9.
Learn more about aperture at: https://brainly.com/question/1771913
#SPJ11
The ___ the forces, the ___ the expected competitive intensity, which in turn limits the industry’s profit potential.
The stronger the forces, the higher the expected competitive intensity, which in turn limits the industry's profit potential.
In competitive markets, various forces impact the level of competition and ultimately affect the profit potential of an industry. When these forces are strong, they tend to increase the intensity of competition, which makes it more challenging for companies within the industry to achieve high profits.
Several forces contribute to competitive intensity, such as the bargaining power of buyers and suppliers, the threat of new entrants, the threat of substitute products or services, and the intensity of rivalry among existing competitors. When these forces are strong, they create a more competitive environment where companies face pressure to lower prices, differentiate their products, or innovate to maintain a competitive edge.
As the competitive intensity increases, profit margins tend to diminish due to price pressures and the need for increased investments in marketing, research and development, or operational efficiency. Therefore, the strength of these forces directly impacts the industry's profit potential, as higher competitive intensity typically leads to lower profitability.
Learn more about forces here:
https://brainly.com/question/13191643
#SPJ11
an electric dipole consists of charges 2e and — 2e separated by 0.78 nm. it is in an electric field of strength 3.4 * 10° n/c. calculate the magnitude of the torque on the dipole when the dipole moment is (a) parallel, () at a right angle, and (¢) opposite to the electric field.
An electric dipole consists of two charges, one positive and one negative, separated by a distance. In this case, the charges are 2e and -2e, where e is the elementary charge. The separation between the charges is 0.78 nm.
To calculate the magnitude of the torque on the dipole, we can use the formula:
Torque = p * E * sin(theta)
where p is the dipole moment, E is the electric field strength, and theta is the angle between the dipole moment and the electric field.
When the dipole moment is parallel to the electric field:
In this case, the angle between the dipole moment and the electric field is 0 degrees. Therefore, sin(0) = 0. The torque on the dipole is zero.
When the dipole moment is at a right angle to the electric field:
In this case, the angle between the dipole moment and the electric field is 90 degrees. Therefore, sin(90) = 1. The torque on the dipole is given by:
Torque = p * E * sin(90)
= p * E
When the dipole moment is opposite to the electric field:
In this case, the angle between the dipole moment and the electric field is 180 degrees. Therefore, sin(180) = 0. The torque on the dipole is zero.
So, the magnitude of the torque on the dipole is zero when the dipole moment is parallel or opposite to the electric field. When the dipole moment is at a right angle to the electric field, the magnitude of the torque is given by p * E.
An electric dipole consists of two charges, one positive and one negative, separated by a distance. The charges in this case are 2e and -2e, where e is the elementary charge. The separation between the charges is 0.78 nm. The magnitude of the torque on the dipole depends on the dipole moment, the electric field strength, and the angle between the dipole moment and the electric field.
When the dipole moment is parallel or opposite to the electric field, the torque on the dipole is zero. This is because the angle between the dipole moment and the electric field is either 0 or 180 degrees, and the sine of these angles is zero.
When the dipole moment is at a right angle to the electric field, the torque on the dipole is given by the formula: Torque = p * E * sin(theta), where p is the dipole moment, E is the electric field strength, and theta is the angle between the dipole moment and the electric field. In this case, the angle theta is 90 degrees, and sin(90) = 1. Therefore, the magnitude of the torque is given by p * E.
The magnitude of the torque on the dipole is zero when the dipole moment is parallel or opposite to the electric field. When the dipole moment is at a right angle to the electric field, the magnitude of the torque is given by p * E.
To know more about dipole moment visit:
brainly.com/question/11626115
#SPJ11
Why did it take more generations of complete selection to reduce q from 0.1 to 0.01 (a 0.09 change) compared that for a 0.5 to 0.1 reduction (a larger, 0.4 change)? explain.
In conclusion, the starting frequency of a trait determines how many generations of complete selection are needed to reduce its frequency. A higher starting frequency allows for a faster reduction, while a lower starting frequency requires more generations for the same amount of change.
The reason it took more generations of complete selection to reduce q from 0.1 to 0.01 compared to reducing it from 0.5 to 0.1 is because of the starting frequencies of q.
When starting with a higher frequency of q, such as 0.5, there is a larger pool of individuals with the desired trait. This means that there are more individuals available for selection and reproduction, which can lead to a faster reduction in the frequency of q.
In contrast, starting with a lower frequency of q, such as 0.1, means that there are fewer individuals with the desired trait. This smaller pool of individuals results in a slower rate of selection and reproduction, leading to a slower reduction in the frequency of q.
To put it simply, it is easier and faster to reduce a trait that is more common in a population compared to one that is less common.
In conclusion, the starting frequency of a trait determines how many generations of complete selection are needed to reduce its frequency. A higher starting frequency allows for a faster reduction, while a lower starting frequency requires more generations for the same amount of change.
To know more about frequency visit:
https://brainly.com/question/29739263
#SPJ11
If the index of refraction in water is about nwater = 1.33 which substance, when shaped into a lens, would have the most focusing power, acrylite or water? explain. 5 pts
The focusing power of a lens is determined by its refractive index. A higher refractive index means a lens can bend light more effectively, resulting in stronger focusing power.
Given that the index of refraction for water is approximately nwater = 1.33, we need to compare this value with the refractive index of acrylite to determine which substance has greater focusing power.
Acrylite, also known as acrylic or PMMA (polymethyl methacrylate), typically has a refractive index around 1.49. Since 1.49 is greater than 1.33, acrylite has a higher refractive index than water.
Therefore, when shaped into a lens, acrylite would have more focusing power than water. The higher refractive index of acrylite allows it to bend light more, resulting in stronger convergence and better focusing capabilities compared to water.
To learn more about power of a lens visit: https://brainly.com/question/30995178
#SPJ11
4.45 mol of an ideal gas is expanded from 431 k and an initial pressure of 4.20 bar to a final pressure of 1.90 bar, and cp,m=5r/2. calculate w for the following two cases:
In both cases, the work done by the gas is 15244.6 J.
To calculate the work done by the gas in the two cases, we need to use the ideal gas law and the equation for work done in an expansion.
The ideal gas law is given by:
PV = nRT
The equation for work done in an expansion is given by:
w = -ΔnRT
Let's calculate the work done in each case.
Case 1:
Initial pressure (P1) = 4.20 bar
Final pressure (P2) = 1.90 bar
Number of moles (n) = 4.45 mol
Temperature (T) = 431 K
To calculate the work done, we need to find the change in moles (Δn):
Δn = n2 - n1
Δn = 0 - 4.45
Δn = -4.45 mol
Substituting the values into the equation for work done:
w = -ΔnRT
w = -(-4.45)(8.314 J/(mol·K))(431 K)
w = 15244.6 J
Therefore, in case 1, the work done by the gas is 15244.6 J.
Case 2:
Initial pressure (P1) = 4.20 bar
Final pressure (P2) = 1.90 bar
Number of moles (n) = 4.45 mol
Temperature (T) = 431 K
To calculate the work done, we need to find the change in moles (Δn):
Δn = n2 - n1
Δn = 0 - 4.45
Δn = -4.45 mol
Substituting the values into the equation for work done:
w = -ΔnRT
w = -(-4.45)(8.314 J/(mol·K))(431 K)
w = 15244.6 J
Therefore, in case 2, the work done by the gas is also 15244.6 J.
To know more about ideal gas law please refer to:
https://brainly.com/question/27870704
#SPJ11
One can calculate work done during isobaric or reversible adiabatic expansion of an ideal gas using thermodynamics principles, the ideal gas law, given values for pressure, volume, and mole quantity, and the specific heat capacity at constant pressure.
Explanation:This problem is about thermodynamics and ideal gases. It can be solved by utilizing the first law of thermodynamics and the ideal gas law, along with the definition of isobaric, or constant pressure process.
The quantity w represents the work done by or on the system. In thermodynamics, work done by an expansion is generally considered to be negative. First, we need to convert our pressure to the same units as R (the ideal gas constant), which in this case is joules, so 1 bar = 100000 Pa.
The work done (w) during an isobaric process is given by w=-P(delta)V, where delta V is the volume change. Finding V1 is done using the ideal gas law equation PV=nRT. Because the process is isobaric, P, n, and R are all constant, simplifying the equation. Solving it, we then substitute back in the values we determined into the isobaric work equation.
The situation is more complex with cp,m=5r/2, which signifies a reversible adiabatic process. In this case, the work done by the system is described by a more complicated equation, which includes an integration over volume and requires knowledge of calculus.
Learn more about Gas expansion here:https://brainly.com/question/34224941
you blow across the open mouth of an empty test tube and produce the fundamental standing wave in the 14.0-cmcm-long air column in the test tube, which acts as a stopped pipe. the speed of sound in air is 344 m/sm/s.
When you blow across the open mouth of an empty test tube, you create a standing wave in the 14.0 cm-long air column inside the tube. This column of air acts as a stopped pipe. The speed of sound in air is given as 344 m/s. the frequency of the fundamental standing wave in the test tube is 614.3 Hz.
To find the frequency of the fundamental standing wave in the test tube, we can use the formula:
frequency = speed of sound / wavelength
Since the test tube is acting as a stopped pipe, we know that the length of the air column is equal to a quarter of the wavelength of the fundamental standing wave.
So, the wavelength of the fundamental standing wave in the test tube is four times the length of the air column, which is 4 * 14.0 cm = 56.0 cm.
Now, we can substitute the values into the formula:
frequency = 344 m/s / 56.0 cm
Before we can continue, we need to convert the wavelength from centimeters to meters:
56.0 cm = 0.56 m
Now, we can substitute the values and solve for the frequency:
frequency = 344 m/s / 0.56 m = 614.3 Hz
To know more about speed of sound visit:
https://brainly.com/question/32259336
#SPJ11
trons accelerated by a potential difference of 12.3 v pass through a gas of hydrogen atoms at room temperature.
When trons are accelerated by a potential difference of 12.3 V, they pass through a gas of hydrogen atoms at room temperature.
In this scenario, the potential difference of 12.3 V is causing the trons to move or accelerate. The trons then interact with the hydrogen atoms in the gas.
At room temperature, hydrogen exists as individual atoms rather than molecules. Each hydrogen atom consists of a single proton and one electron. When the trons pass through the gas of hydrogen atoms, they may collide with the hydrogen atoms and interact with their electrons.
These interactions between the trons and hydrogen atoms can have various outcomes. For example, the trons may transfer energy to the hydrogen atoms, causing them to become excited or even ionized. This transfer of energy can lead to the emission of light or the formation of ions.
To summarize, when trons are accelerated by a potential difference of 12.3 V and pass through a gas of hydrogen atoms at room temperature, they can interact with the hydrogen atoms, causing various outcomes such as excitation or ionization. This interaction between the trons and hydrogen atoms is influenced by the energy transfer between them.
To know more about hydrogen ions visit:
https://brainly.com/question/8069088
#SPJ11
Directions
Use the data to answer the question. Information
A student sets up the circuit to test which materials can be a switch
In the given circuit, if the switch is closed, both light bulb 1 and light bulb 2 will be on.
When the switch in the circuit is closed, a complete circuit is formed, allowing current to flow. The battery acts as the power source, supplying voltage to the circuit. Light bulb 1 and light bulb 2 are connected in parallel to the battery and the switch.
When the switch is closed, current flows through both light bulbs simultaneously. Light bulb 1 will be on because the circuit is complete and current can pass through it. Similarly, light bulb 2 will also be on because it is connected in parallel to the battery and switch.
In a parallel circuit, each component has its own separate path for current to flow. This means that even if one light bulb is faulty or turned off, the other light bulb can still receive current and remain on. Therefore, in this circuit, both light bulb 1 and light bulb 2 will be on when the switch is closed.
A student builds a circuit made up of a battery, two light bulbs, and a switch. What will the student most likely observe in this circuit?
Light bulb 1 and light bulb 2 will both be on
Light bulb 1 will be off, but light bulb 2 will be on
Light bulb 1 and light bulb 2 will both be off
Light bulb 1 will be on, but light bulb 2 will be off
Find more about electrical circuit on:
https://brainly.com/question/12194667
#SPJ11
Find the slit separation (in m) of a double-slit arrangement that will produce interference fringes 0.0218 rad apart on a distant screen when the light has wavelength 531 nm.
The slit separation required to produce interference fringes 0.0218 rad apart on a distant screen with light of wavelength 531 nm is approximately 0.625 mm.
In a double-slit interference setup, the fringe separation is determined by the wavelength of the light and the slit separation. The formula relating these quantities is given by:
λ = (m * λ) / d
where λ is the wavelength of light, m is the order of the fringe, and d is the slit separation.
In this case, we are given the wavelength of light (531 nm) and the fringe separation (0.0218 rad). Since the fringe separation corresponds to the first-order fringe (m = 1), we can rearrange the formula to solve for the slit separation:
d = (m * λ) / λ
Substituting the given values, we get:
d = (1 * 531 nm) / 0.0218 rad
Converting the wavelength to meters (1 nm = 1 × 10^(-9) m), we have:
d = (1 * 531 × 10^(-9) m) / 0.0218 rad
Calculating this expression gives us approximately 0.625 mm for the slit separation required to produce interference fringes 0.0218 rad apart on the distant screen with light of wavelength 531 nm.
To learn more about wavelength, Click Here: brainly.com/question/32900586
#SPJ11
What is the current through a conductor that carries a flow of 5. 98*10^25 electrons through its cross section in a period of 4 hours?
The current through a conductor carrying a flow of 5.98 * [tex]10^{25}[/tex] electrons through its cross-section in a period of 4 hours can be calculated using the formula I = Q / t, where I is the current, Q is the charge, and t is the time.
The formula for calculating current is I = Q / t, where I represents the current, Q represents the charge, and t represents the time. To determine the current through the conductor, we need to find the total charge carried by the given number of electrons and the corresponding time period.
The charge carried by a single electron is known as the elementary charge, denoted as e, which is approximately 1.6 *[tex]10^{-19}[/tex] coulombs. We can calculate the total charge (Q) carried by the given number of electrons by multiplying the number of electrons (5.98 * [tex]10^{25}[/tex]) by the elementary charge (1.6 * [tex]10^{-19}[/tex] C):
Q = (5.98 * [tex]10^{25}[/tex]) * (1.6 *[tex]10^{-19}[/tex]C) = 9.568 *[tex]10^{6}[/tex] C
Next, we need to convert the time period of 4 hours into seconds since current is typically measured in amperes per second. One hour is equal to 3600 seconds, so 4 hours is equal to 4 * 3600 = 14400 seconds.
Now we can calculate the current (I) by dividing the total charge (Q) by the time period (t):
I = Q / t = (9.568 * [tex]10^{6}[/tex] C) / (14400 s) = 664.4 A
Therefore, the current through the conductor carrying a flow of 5.98 * [tex]10^{25}[/tex]electrons through its cross-section in a period of 4 hours is approximately 664.4 Amperes.
Learn more about conductor here:
https://brainly.com/question/14366425
#SPJ11
A police car is traveling east at 40.0 m/s along a straight road, overtaking a car ahead of it moving east at 30.0 m/s . The police car has a malfunctioning siren that is stuck at 1000 Hz. (b) What is the wavelength in front of the police car?
The wavelength in front of the police car is approximately 0.343 meters.
The wavelength in front of the police car can be calculated using the formula:
wavelength = speed of sound/frequency
In this case, the speed of sound is approximately 343 meters per second (m/s) in the air. The frequency of the malfunctioning siren is given as 1000 Hz.
To find the wavelength, we can substitute these values into the formula:
wavelength = 343 m/s / 1000 Hz
Calculating this, we get:
wavelength = 0.343 m
Additionally, the given information about the police car and the overtaken car traveling east at different speeds is not directly related to the calculation of the wavelength.
To know more about wavelength please refer:
https://brainly.com/question/10750459
#SPJ11
What is the angular velocity of mars as it orbits the sun?
The angular velocity of Mars as it orbits the Sun is approximately [tex]1.03 * 10^{-7}[/tex] radians per second.
The angular velocity of an object in circular motion is defined as the rate at which it sweeps out angle per unit of time. In the case of Mars orbiting the Sun, its angular velocity represents the speed at which it moves along its orbital path.
To calculate the angular velocity of Mars, we need to know its orbital period and the radius of its orbit. The orbital period of Mars is approximately 687 Earth days, and the radius of its orbit is approximately 227.9 million kilometers.
Using the equation for angular velocity (ω = 2π / T), where ω is the angular velocity and T is the period, we can calculate the angular velocity of Mars.
ω = 2π / T = 2π / (687 days * 24 hours/day * 60 minutes/hour * 60 seconds/minute)
Substituting the values into the equation and performing the calculations, we find that the angular velocity of Mars as it orbits the Sun is approximately [tex]1.03 * 10^{-7}[/tex] radians per second.
To know more about angular velocity refer here:
https://brainly.com/question/32217742?#
#SPJ11
m. c. gonzalez-garcia and m. maltoni, phenomenology with massive neutrinos, phys. rept. 460 (2008) 1–129, [arxiv:0704.1800].
The paper by Gonzalez-Garcia and Maltoni provides a comprehensive overview of the phenomenology of massive neutrinos. It is an important resource for researchers .
The paper titled "Phenomenology with Massive Neutrinos" by M. C. Gonzalez-Garcia and M. Maltoni, published in Physical Reports in 2008, provides a comprehensive review of the phenomenology of massive neutrinos.
The paper is an authoritative source that discusses the theoretical framework and experimental evidence for the existence of neutrino masses.
Neutrinos are elementary particles that were originally thought to be massless.
However, experimental observations have shown that neutrinos undergo flavor oscillations, which implies that they must have non-zero masses. This discovery has profound implications for particle physics and cosmology.
The paper explores various aspects of neutrino phenomenology, including the measurement of neutrino masses and mixing angles, the implications for the Standard Model of particle physics, and the role of neutrinos in astrophysics and cosmology.
In conclusion, the paper by Gonzalez-Garcia and Maltoni provides a comprehensive overview of the phenomenology of massive neutrinos. It is an important resource for researchers and students interested in understanding the properties and implications of neutrino masses.
To know more about phenomenology visit;
brainly.com/question/31365092
#SPJ11
How much of the energy reaching earth is absorbed and converted to chemical energy by the process of photosynthesis?
Approximately 1% of the sunlight that reaches the Earth's surface is absorbed by plants and converted into chemical energy through photosynthesis.
The process of photosynthesis is responsible for converting solar energy into chemical energy. However, it is important to note that not all the energy reaching the Earth is absorbed and converted through this process. In fact, only a small fraction of the total solar energy is used for photosynthesis. This energy is then stored in the form of glucose molecules, which can be further transformed into other organic compounds such as starch, cellulose, and lipids.
The efficiency of photosynthesis can vary depending on various factors such as light intensity, temperature, and the availability of nutrients. For example, plants grown under optimal conditions can achieve higher rates of photosynthesis and conversion of solar energy into chemical energy. It is important to note that while photosynthesis is a vital process for plants and other autotrophic organisms, it is not the only way energy is converted on Earth.
Other organisms, such as heterotrophs, obtain energy indirectly by consuming plants or other organisms that have already stored the chemical energy through photosynthesis. In summary, only a small fraction of the energy reaching the Earth is absorbed and converted into chemical energy through photosynthesis. This process is responsible for approximately 1% of the total solar energy being converted into chemical energy by plants.
To know more about energy , visit:
https://brainly.com/question/1932868
#SPJ11
What choice best describes the strong force none of the aboce it explains radioactive decay it holds the nucleus of an atom together it describes the interaction of charged particles
The strong force holds the nucleus of an atom together.
The strong force, also known as the strong nuclear force, is one of the four fundamental forces in nature. It is responsible for holding the nucleus of an atom together. This force is very strong, which is why it can overcome the repulsive forces between positively charged protons in the nucleus. Without the strong force, the nucleus would not be stable, and atoms would not exist as we know them. The strong force acts only at very short distances within the nucleus and does not play a role in interactions between charged particles outside the nucleus.
Know more about nucleus here:
https://brainly.com/question/23366064
#SPJ11
Why do the gravitational force and the normal force on an object always equal each other? how do they know to balance out?
The gravitational force and the normal force on an object always equal each other because they are an action-reaction pair. The normal force arises as a reaction to the force of gravity, and this balance ensures that the object remains at rest and in equilibrium.
The gravitational force and the normal force on an object always equal each other because they are a result of the same interaction. The gravitational force is the force of attraction between two objects with mass. On Earth, it pulls objects towards the center of the planet. The normal force, on the other hand, is the force exerted by a surface to support the weight of an object resting on it.
To understand why these forces balance out, we need to consider Newton's third law of motion, which states that for every action, there is an equal and opposite reaction. When an object is resting on a surface, the force of gravity pulls it downwards, while the surface exerts an equal and opposite force upwards to support the weight of the object. This upward force is the normal force.
In other words, the normal force arises as a reaction to the force of gravity. When the object is at rest and not accelerating vertically, the gravitational force pulling downwards is balanced by the normal force pushing upwards. This balance ensures that the object remains in equilibrium.
For example, imagine placing a book on a table. The weight of the book pulls it downwards due to gravity. In response, the table exerts an equal and opposite force upwards, called the normal force. The normal force prevents the book from sinking through the table and keeps it in place.
In summary, the gravitational force and the normal force on an object always equal each other because they are an action-reaction pair. The normal force arises as a reaction to the force of gravity, and this balance ensures that the object remains at rest and in equilibrium.
To know more about gravitational force visit:
https://brainly.com/question/32609171
#SPJ11
knowing the arduino runs at 16mhz, we can estimate that time it takes to reach the cap threshold (or the time it takes the capacitor to charge up to the on voltage of 2.5v) is 1/16e6*cap threshold. knowing this information and the value of your resistor, calculate the value of capacitance needed for the circuit to sense that the sense pad has been touched. hint – use the first-order response equation).
To calculate the value of capacitance needed for the circuit to sense that the sense pad has been touched, we need to use the first-order response equation. The equation for the first-order response of an RC circuit is given by:
[tex]V(t) = Vf(1 - e^(-t/RC))[/tex]
In this equation, V(t) represents the voltage across the capacitor at time t, Vf is the final voltage (in this case, 2.5V), e is the base of the natural logarithm, t is the time, R is the resistance, and C is the capacitance.
We are given that the time it takes for the capacitor to charge up to the on voltage of 2.5V is 1/16e6 * cap threshold, where cap threshold represents the capacitance threshold.
To calculate the capacitance, we can rearrange the equation and solve for C:
[tex]V(t) = Vf(1 - e^(-t/RC))[/tex]
[tex]2.5V = 2.5V(1 - e^(-t/RC))\\[/tex]
[tex]1 = 1 - e^(-t/RC)[/tex]
[tex]e^(-t/RC) = 0[/tex]
Since the exponential term is equal to zero, this implies that the time constant t/RC is infinite. Therefore, the capacitance required to sense that the sense pad has been touched is infinite.
The value of capacitance needed for the circuit to sense that the sense pad has been touched is infinite. This means that the capacitance should be very large.
The capacitance needed for the circuit to sense that the sense pad has been touched depends on the time constant of the RC circuit. The time constant is given by the product of the resistance (R) and the capacitance (C). In this case, the time it takes for the capacitor to charge up to the on voltage of 2.5V is given as 1/16e6 * cap threshold.
However, when we solve for the capacitance using the first-order response equation, we find that the capacitance required is infinite. This means that the capacitance should be very large in order for the circuit to sense that the sense pad has been touched.
The capacitance needed for the circuit to sense that the sense pad has been touched is infinite or very large.
To know more about voltage visit:
brainly.com/question/32002804
#SPJ11
How much work must be done by a system heated with 50 J if the goal was to reduce its internal energy by 15 J
If a system is heated with 50 J and the goal is to reduce its internal energy by 15 J, the system must do -15 J of work.
The amount of work done by a system can be calculated using the equation:
Work = Change in Internal Energy
In this case, the goal is to reduce the internal energy of the system by 15 J.
This means that the change in internal energy is -15 J (negative because it is a reduction).
Therefore, the work done by the system would be -15 J.
To clarify, when work is done on a system, the work is positive, but when work is done by a system, the work is negative. In this case, the system is doing the work, so the work is negative.
So, the answer to the question "How much work must be done by a system heated with 50 J if the goal was to reduce its internal energy by 15 J?" is -15 J.
To know more about internal energy visit:
https://brainly.com/question/11742607
#SPJ11
