To shift the potential of the lead-zinc cell upward, toward 0.70 V, the following actions would give the desired result:
Add some concentrated Pb(C2H3O2)2 solution to the Pb2+/Pb couple
Adding some concentrated Zn(C2H3O2)2 solution to the Zn2+/Zn couple
Any action that makes [Zn2+] larger than [Pb2+]
A lead-zinc cell is a galvanic cell consisting of lead and zinc electrodes immersed in a suitable electrolyte. The potential of the lead-zinc cell is the difference in electrode potential between the lead and zinc electrodes, as determined by their concentration gradient.
Therefore, to shift the potential of the lead-zinc cell upward, toward 0.70 V, one should add some concentrated Pb(C2H3O2)2 solution to the Pb2+/Pb couple, add some concentrated Zn(C2H3O2)2 solution to the Zn2+/Zn couple, and any action that makes [Zn2+] larger than [Pb2+].
To learn more about "lead-zinc cell", visit: https://brainly.com/question/31316460
#SPJ11
a process in which the solution containing alcohol is heated and the vapors are collected and then condensed into liquid form again. Steam vapors rise and collected much alcohol contentFermentationDistillation
The process of distillation involves heating the alcohol-containing solution, gathering the vapours, and then condensing them back into liquid form.
According to their boiling points, liquids are separated and purified using the distillation process. When it comes to alcohol, the solution is heated until the alcohol evaporates into a vapour, which is then collected and condensed back into a liquid state. A highly concentrated alcohol solution is produced as a result of this procedure, which enables the separation of the alcohol from other elements in the solution.
Alcoholic drinks including whisky, vodka, gin, and rum are made by distillation.
In the chemical industry, distillation is used to separate and purify various compounds and solvents.
In the process of refining petroleum, distillation is used to separate crude oil into several products, including gasoline, diesel, and kerosene.
Learn more about Distillation here:
brainly.com/question/29037176
#SPJ4
Cattails in swamps are used to absorb chemical pollutants. what method of reducing pollutant concentration is this
Phytoremediation is a cost-effective and environmentally friendly method of reducing pollutant concentrations and restoring contaminated ecosystems.
What is Pollutants?
Pollutants are substances or agents that contaminate the environment and have harmful effects on living organisms, natural resources, or the climate. Pollutants can be released into the air, water, or soil from natural sources or human activities such as industrial processes, transportation, agriculture, and waste disposal. Some common examples of pollutants include greenhouse gases, particulate matter, ozone, nitrogen oxides, sulfur dioxide, lead, mercury, pesticides, and plastic waste.
The method of using cattails in swamps to absorb chemical pollutants is called phytoremediation. Phytoremediation is a type of bioremediation that uses plants to remove, detoxify, or sequester contaminants from soil, water, or air. In this process, plants absorb contaminants through their roots or take them up from the air and store them in their tissues or metabolize them into less harmful forms. Cattails are particularly effective at removing organic pollutants such as pesticides, herbicides, and petroleum products, as well as heavy metals like lead, cadmium, and arsenic.
Learn more about Pollutants from given link
https://brainly.com/question/24704410
#SPJ1
if the density of a gas is 1.87 grams/liter at 34.0 c and 745 mm hg, what will be its density at 84.0 c and 721 mm hg?
The density of the gas at 84° C and 721 mm Hg will be 2.50 g/L.
The density of a gas can be calculated using the following formula:
Density = (Pressure x Molar Mass) / (Gas Constant x Temperature)
Where, Density is the density of the gas in grams per liter. Pressure is the pressure of the gas in millimeters of mercury (mm Hg). Molar mass is the molar mass of the gas in grams per mole. Gas constant is the universal gas constant (0.08206 L atm / mole K). Temperature is the temperature of the gas in kelvin (K).
Now, let's find the density of the gas at 34° C and 745 mm Hg. The temperature should be converted from Celsius to Kelvin. Temperature (K) = 34 + 273 = 307 K
Density = (Pressure x Molar Mass) / (Gas Constant x Temperature)
Density = (745 x Molar Mass) / (0.08206 x 307)
Density = 28.91 x Molar Mass g/L
Also, we need to find the molar mass of the gas. Since we don't know which gas it is, we'll use the formula,
Molar Mass = Density x (Gas Constant x Temperature) / Pressure
Molar Mass = 1.87 x (0.08206 x 307) / 745
Molar Mass = 0.103 g/mol
Now, we can find the density of the gas at 84° C and 721 mm Hg.
Temperature (K) = 84 + 273 = 357 K
Density = (Pressure x Molar Mass) / (Gas Constant x Temperature)
Density = (721 x 0.103) / (0.08206 x 357)
Density = 2.50 g/L
Therefore, the density of the gas at 84° C and 721 mm Hg will be 2.50 g/L.
To know more about density, refer here:
https://brainly.com/question/12022043#
#SPJ11
Dinitrogen and dihydrogen react with each other to produce ammonia according to the following chemical equation:N2gdinitrogen+ 3H2gdihydrogen→2NH3gammonia(i) calculate the mass of ammonia produced if 2.00 × 103 g dinitrogen reacts with 1.00 × 103 g of dihydrogen.(ii) will any of the two reactants remain unreacted? if yes which one ?(iii) what would be its mass?
(i).The mass of ammonia produced is 2.43 x 10^3 g. (ii) The 71.4 moles of dinitrogen react with 214.2 moles of dihydrogen to produce 142.8 moles of ammonia. (iii) Mass of ammonia produced in given reaction with 1 gram of dinitrogen and 3 grams of dihydrogen is 1.22 g.
Using the given masses of dinitrogen and dihydrogen, we can calculate moles of each:
dinitrogen = mass/molar mass = 2.00 x 10^3 g/28 g/mol = 71.4 mol,
dihydrogen = mass/molar mass = 1.00 x 10^3 g/2 g/mol = 500 mol
The mass of ammonia produced can be calculated as:
[tex]Mass of ammonia = moles * molar mass = 142.8 mol * 17 g/mol = 2.43 * 10^{3 }g[/tex]
Therefore, the mass of ammonia produced is 2.43 x 10^3 g.
We can calculate the mass of ammonia produced using the equation:
[tex]mass = number of moles * molar mass = 2 * 0.0356 * 17.03 = 1.22 g[/tex]
To know more about dinitrogen, here
brainly.com/question/9909261
#SPJ4
4. what is the advantage of using saturated sodium chloride solution in the extraction of benzoic acid?
The advantage of using saturated sodium chloride solution in the extraction of benzoic acid is that it helps to separate benzoic acid from other components in a solution due to its high solubility.
Extraction refers to the process of separating a particular compound from a mixture using a solvent. It's used to purify compounds, remove impurities, or separate two different compounds.
Benzoic acid is a white crystalline solid that can be extracted from benzoin or benzene, and it has a range of applications.
Sodium chloride is a common reagent used in the extraction of benzoic acid.
The isotonic nature makes it useful as a reagent for the separation of organic and aqueous layers. It causes the organic phase to separate easily:
Thus, overall, the use of saturated sodium chloride solution can help to improve the efficiency of the extraction process, allowing for better separation of the organic compound from the aqueous layer.
Learn more about the extraction of benzoic acid here:
brainly.com/question/28692026
#SPJ11
which area on the illustration represents the largest reservoir of nitrogen on earth? 7 3 1 4
The atmosphere, which is represented by Area 1, is the main source of nitrogen on Earth. About 78% of the Earth's atmosphere is made up of nitrogen gas (N2), which is essential to numerous industrial and biological processes.
Sadly, I am unable to give a precise response without access to the question's referenced illustration. I can, however, give some general knowledge about the nitrogen cycle and the various nitrogen reserves on Earth.
The environment contains nitrogen, an element that is necessary for life, in a variety of forms, including nitrogen gas (N2), ammonia (NH3), nitrite (NO2), nitrate (NO3-), and organic nitrogen. A number of biological and chemical mechanisms are used in the nitrogen cycle to change nitrogen's form and transfer it through various reservoirs.
The atmosphere, which contains around 78% nitrogen gas, is the planet's biggest source of nitrogen. Unfortunately, most organisms cannot access atmospheric nitrogen directly; instead, it must be transformed into a useful form through nitrogen fixation. Nitrogen fixation is the process of converting atmospheric nitrogen into ammonia or other organic nitrogen compounds, which can be taken up by plants and other organisms.
learn more about nitrogen gas here:
https://brainly.com/question/11426882
#SPJ4
(c)
Ammonia is a weak base.
Describe how you would measure the pH of an aqueous solution of a weak base using Universal
Indicator.
You need to know the hydronium ion concentration in moles per litre to determine the pH of the an aqueous solution (molarity). The equation pH Equals - log [H3O+] is then used to determine the pH.
Why is an all-purpose indicator so helpful for determining pH?An universal indicator is indeed a pH indicator made of the a solution of many compounds which exhibits several continuous colour changes more than a wide range pH levels to indicate the alkaline or acidic nature of solutions.
What are the two techniques you can use to determine a solution's pH?There are two ways to measure pH: colorimetrically with indicator fluids or sheets and electrochemically with electrodes as well as a millivoltmeter for greater accuracy (pH meter).
To know more about hydronium visit:
https://brainly.com/question/29286376
#SPJ1
What is the type of mixture whose components are evenly distributed throughout?
The type of mixture whose components are evenly distributed throughout is a homogeneous mixture.
A homogeneous mixture is a mixture in which the components are uniformly distributed throughout. The mixture appears to be the same throughout, and it has the same physical and chemical properties throughout. The composition of the components of a homogeneous mixture is uniform. An example of a homogeneous mixture is a solution of sugar and water. Sugar dissolves in water to form a homogeneous mixture. Another example is salt and water. Salt dissolves in water to form a homogeneous mixture.
However, These are the kinds of combinations where the ingredients are evenly dispersed throughout. In other words, "they are consistent throughout. In a homogenous mixture, we can only see one phase of the substance and components are evenly distributed throughout .
To know more about Homogenous mixture please visit:
https://brainly.com/question/20956879
#SPJ11
PLEASE HELP ME ASAP
The orbital diagram suggest Pauli's exclusion principle.
option C.
What is Pauli's exclusion principle?Pauli's Exclusion Principle is a fundamental principle of quantum mechanics that states that no two identical fermions (particles with half-integer spin, such as electrons, protons, and neutrons) can occupy the same quantum state simultaneously.
In other words, if one fermion is in a particular quantum state, then no other fermion can be in that same quantum state at the same time.
This principle is crucial in understanding the behavior of matter at the atomic and subatomic level. It explains, for example, why electrons in an atom occupy different energy levels and why atoms and molecules have unique chemical and physical properties.
The diagram suggest that the spin is different, so it describes Pauli's exclusion principle.
Learn more about Pauli's exclusion principle here: https://brainly.com/question/16950638
#SPJ1
Scenario 1: The magnets are equal strength. Predict: How would the overall kinetic energy in the system change? Why?
Answer:
Magnetized objects move in the direction that reduces their magnetic potential energy. This is no different than the skate park.
Explanation:
any groups present on a benzene ring can impact the success and regioselectivity of an electrophilic aromatic substitution. determine which group from the list best fits each activation and directing description. moderately deactivating meta- director choose... strongly activating ortho-/para- director choose... weakly activating ortho-/para- director choose... strongly deactivating meta- director choose... weakly deactivating ortho-/para- director choose...
The groups present on a benzene ring can impact the success and regioselectivity of an electrophilic aromatic substitution
. The activation and directing effects of various groups present on a benzene ring are as follows: Moderately deactivating meta- director: Nitro (-NO2), Sulfonyl (-SO3H)Strongly activating ortho-/para- director: Amino (-NH2), Hydroxyl (-OH), Alkoxy (-OR), Aryl (-Ar), Alkyl (-R), Dialkylamino (-N (R) 2), Carboxyl (-COOH)Weakly activating ortho-/para- director: Chloro (-Cl), Bromo (-Br), Iodo (-I)Strongly deactivating meta- director: Carbonyl (-C (O) R), Cyano (-CN)Weakly deactivating ortho-/para- director: Methyl (-CH3), Ethyl (-C2H5), Phenyl (-C6H5)Therefore, the groups that best fit each activation and directing description are as follows: Moderately deactivating meta- director: Nitro (-NO2)Strongly activating ortho-/para- director: Amino (-NH2)Weakly activating ortho-/para- director: Chloro (-Cl)Strongly deactivating meta- director: Carbonyl (-C (O) R)Weakly deactivating ortho-/para- director: Methyl (-CH3)
Learn more about benzene ring at brainly.com/question/19260725
#SPJ11
where is the equilibrium shifts when the concentration of h2(gas) is increased by adding more hydrogen gas to the container at constant temperature?
The equilibrium shift when the concentration of H2 (gas) is increased by adding more hydrogen gas to the container at constant temperature is towards the right side of the reaction equation.
Let us understand how the reaction shifts with the help of the following chemical reaction equation. N2(g) + 3H2(g) ⇌ 2NH3(g).
Adding more H2 gas to the container at constant temperature will increase the concentration of H2 gas.
The reaction will shift towards the product side (right side of the reaction equation) to balance the reaction equation.
The concentration of NH3 gas will increase, and the concentration of N2 gas and H2 gas will decrease.
The reaction quotient (Qc) is used to predict the direction of the reaction.
If Qc is greater than Kc, the reaction shifts towards the left side of the reaction equation.
If Qc is less than Kc, the reaction shifts towards the right side of the reaction equation.
.f Qc is equal to Kc, the reaction is at equilibrium state with no shift in the reaction.
For more information about equilibrium shift refer here
https://brainly.com/question/15164034?
#SPJ11
For charged particles, how does the strength of the interaction vary in each of the following cases? (Increase or decrease) a. The distance between the charges increases. b. The size of the charge decreases.
In each of the following situations, the intensity of the interaction differs for charged particles.
a. The distance between the charges increases. (decreases)
b. The size of the charge decreases. (increases)
a. The strength of the interaction between charged particles decreases as the distance between them increases. This is because the force between charged particles follows an inverse square law, which means that the force decreases with the square of the distance between the charges. Therefore, as the distance between the charges increases, the force between them decreases and the strength of the interaction decreases.
b. The strength of the interaction between charged particles increases as the size of the charge decreases. This is because the force between charged particles is directly proportional to the magnitude of the charge. Therefore, as the size of the charge decreases the force between the charged particles decreases and the strength of the interaction decreases.
Learn more about intensity of the interaction:
https://brainly.com/question/21272586
#SPJ11
which atomic particles are in a unique cloud outside of the nucleus of the atomprotonelectronneutron
The atomic particles known as electrons are found in a distinct cloud outside of the atom's nucleus. The nucleus contains protons and neutrons.
Protons and neutrons are found in the centre nucleus of an atom, and electrons are found in a separate cloud that surrounds the nucleus. The atomic mass of an atom is made up of neutrons, which have no charge, and protons, which have a positive charge. Contrarily, electrons are negatively charged and control an element's chemical characteristics. The electron cloud, also known as the orbital, is the distinct cloud that surrounds the nucleus and is where the electrons are located. It is distinguished by various energy levels or shells. The quantity and configuration of electrons in an atom's electron cloud govern the atom's reactivity and chemical behaviour.
learn more about electrons here:
https://brainly.com/question/12001116
#SPJ4
ion channels that open and close in response to a change in membrane potential are called _____.
Ion channels that open and close in response to a change in membrane potential are called voltage-gated ion channels.
What is Voltage-gated ion channels?Voltage-gated ion channels are a specialized type of membrane protein that are embedded in the lipid bilayer of excitable cells. They have a pore that allows ions to flow through, and they can be selective for different types of ions, such as sodium (Na+), potassium (K+), or calcium (Ca2+).
The opening and closing of the channel's pore is controlled by changes in the membrane potential, which is the difference in electrical charge across the cell membrane.
These channels are crucial for the generation and propagation of electrical signals in excitable cells, such as neurons and muscle cells. Voltage-gated ion channels are capable of detecting small changes in membrane potential and responding by opening or closing their pore, allowing ions to flow across the membrane and alter the electrical state of the cell.
Learn more about ion channels here: https://brainly.com/question/12578279
#SPJ1
What 4 elements have many properties like iron?
Answer:
Cobalt, Nickel, Chromium, and Copper
When a scientist carefully examines any quantities repeatedly, they actually expect *
A. All measurements are just as accurate.
B. Only two measurements will be accurate.
C. All but one measurement will be the same
D. All measurements are almost but not the same
When a scientist carefully examines any quantities repeatedly, they actually expect that all but one measurement will be the same. The correct option is C.
Measurement error is the difference between the value obtained by the observer and the true value of the quantity being measured. When scientists take measurements, they try to reduce errors as much as possible so that they can have a more precise value. Measurement error is divided into two categories: systematic errors and random errors.
In any situation, scientists and researchers want to ensure that their measurements are as accurate as possible. As a result, when taking measurements, they will repeat the measurements multiple times to obtain the most precise data possible. In such a situation, a scientist will expect that all but one measurement will be the same. They will then take the average of the multiple measurements taken, which is more accurate than taking a single measurement. This technique reduces the likelihood of systematic errors, which can arise due to environmental factors, instrument errors, or personal errors.
For more such questions on error, click on:
https://brainly.com/question/30610309
#SPJ11
which is the major product fomed when a mixture of ch3ch2oh and concentrated h2so4 is heated strongly?
If the reaction quotient (Q) is smaller than the equilibrium constant (K) for a reaction then which way will the reaction proceed? a. The reaction is at equilibrium and the reaction will proceed at equal rates in the reverse and forward direction. b. The reaction will proceed to the right (products side) c. The reaction equation is required to answer this question d. The reaction will proceed to the left( reactants side)
If the reaction quotient (Q) is smaller than the equilibrium constant (K) for a reaction, then the reaction will proceed towards the right, i.e., in the direction of the products. The correct option is (b).
This is because the forward reaction is favored over the reverse reaction as there is less number of products present, and the system tends to minimize the stress caused by an increase in the number of reactants. Here, stress refers to the difference between Q and K.
In other words, if Q < K, then the system has less number of products than it should at equilibrium. Hence, the reaction proceeds in the forward direction to increase the number of products until Q = K. After this point, the reaction reaches equilibrium, and the rates of the forward and reverse reactions become equal.
In contrast, if Q > K, then the system has more products than it should be at equilibrium. Hence, the reaction proceeds in the reverse direction to decrease the number of products until Q = K. After this point, the reaction reaches equilibrium, and the rates of the forward and reverse reactions become equal.
Therefore, option (b) is the correct answer. The reaction will proceed to the right (product side) if Q is smaller than K.
To know more about equilibrium constant, refer here:
https://brainly.com/question/15118952#
#SPJ11
Whats the difference between zinc amino acid chelate with any other type of zincs?
Answer:
chelated zinc is more easily absorbed than zinc on it's own.
what is the formula for chlorine
what is the molarity of a calcium carbonate solution if 2.00 moles of calcium carbonate are dissolved in 125 ml of water?
Answer:
To calculate the molarity of a calcium carbonate (CaCO3) solution, we first need to convert the volume of water from milliliters (mL) to liters (L).
Volume of water = 125 mL = 0.125 L
Next, we need to use the number of moles of CaCO3 and the volume of water to calculate the molarity:
Molarity = number of moles / volume of solution
Molarity = 2.00 mol / 0.125 L
Molarity = 16.0 M
Therefore, the molarity of the calcium carbonate solution is 16.0 M. However, it's important to note that this concentration is not physically possible as the solubility of calcium carbonate in water is relatively low. Therefore, it's likely that the amount of calcium carbonate that actually dissolves in 125 mL of water is much less than 2.00 moles, making the actual molarity much lower.
(Please could you kindly mark my answer as brainliest)
Calculate the root mean square (rms) average speed of the atoms in a sample of neon gas at 0.17atm and −52.°C . Round your answer to 3 significant digits.
Root mean square (RMS) average speed of the atoms in a sample of neon gas at 0.17atm and −52.°C is 2.233 × 10⁻⁴m/s.
The root mean square (rms) average speed of the atoms in a sample of neon gas at 0.17atm and −52.°C can be calculated as follows:
Given data: Pressure, P = 0.17atm Temperature, T = -52°C = 221 K
Atomic weight of Neon, m = 20.18 g/mol = 20.18 × 10^-3 kg/molR = 8.314 J/mol KKB = R/NA = 1.38 × 10^-23 J/K (Boltzmann constant).
The root mean square (rms) velocity of gas is given by the equation:rms velocity, vrms = [3KB T/m]^1/2where, m = molar mass of gas, T = temperature, and KB = Boltzmann constant.
Substituting the given data, we get:v(rms) = [3KB T/m]^(1/2)v(rms) = [3KB T/m]^(1/2)v(rms) = [3 × (1.38 × 10^-23 J/K) × 221 K / (20.18 × 10^-3 kg/mol)]^(1/2)v(rms) = [4.981 × 10^-20 m^2/s^2]^(1/2) = 2.233 × 10⁻⁴ m/s.
Therefore, the RMS average speed of the atoms in a sample of neon gas at 0.17atm and −52.°C is 2.233 × 10⁻⁴ m/s (rounded off to 3 significant digits).
For more information about RMS average speed refer here
https://brainly.com/question/13095222?
#SPJ11
Use these two constants for the question that follows:
e = 1.6 × 10^−19 C
k = 8.99 × 10^9 N m^2/C^2
A positive charge and a negative charge are 10^−15 m away from each other. Using Coulomb's law, which of the following is the electrical force between these two particles?
230 N
−230 N
120 N
−120 N
Answer: -230 N
Explanation:
The electrical force between two point charges q1 and q2 separated by a distance r is given by Coulomb's law:
F = k * (q1 * q2) / r^2
where k is the Coulomb constant, q1 and q2 are the magnitudes of the charges, and r is the distance between them.
In this case, we have a positive charge and a negative charge, which means that q1 and q2 have opposite signs. Let's assume that the positive charge has a magnitude of q and the negative charge has a magnitude of -q. Then, the electrical force between them can be calculated as:
F = k * (q * (-q)) / r^2 = -k * q^2 / r^2
Substituting the given values of e and k, we get:
F = - (8.99 × 10^9 N m^2/C^2) * (1.6 × 10^-19 C)^2 / (10^-15 m)^2 ≈ -230 N
Note that the negative sign indicates that the force is attractive, which is expected for opposite charges. Therefore, the correct answer is:
-230 N.
Ideal Gas Lab
Data:
Complete the table to organize the data collected in this lab. Don’t forget to record measurements with the correct number of significant figures.
(Table attached below)
Data Analysis:
Create a separate graph of temperature vs. volume for each of the gas samples. You are encouraged to use graphing software or online tools to create the graphs; be sure to take screenshots of the graphs that also include your data.
Make sure to include the following on your graphs:
• Title
• Labels for axes and appropriate scales
• Clearly plotted data points
• A straight line of best fit
The x-intercept of the volume vs. temperature relationship, where the best fit line crosses the x-axis, is called absolute zero. Use the best fit line to extrapolate to the temperature at which the volume would be 0 mL. Record this value. It is your experimental value of absolute zero.
Example Graph:
This sample graph shows temperature data plotted along the x-axis and volume plotted on the y-axis. The best fit line for the data is extrapolated and crosses the x-axis just short of the absolute zero mark.
Calculations:
1. The actual value for absolute zero in degrees Celsius is −273.15. Use the formula below to determine your percent error for both gas samples.
|experimental value – actual value| x 100
actual value
2. If the atmospheric pressure in the laboratory is 1.2 atm, how many moles of gas were in each syringe? (Hint: Choose one volume and temperature pair from your data table to use in your ideal gas law calculation.)
Conclusion:
Write a conclusion statement that addresses the following questions:
How did your experimental absolute zero value compare to the accepted value?
Does your data support or fail to support your hypothesis (include examples)?
· Discuss any possible sources of error that could have impacted the results of this lab.
How do you think the investigation can be explored further?
Post-Lab Reflection Questions
Answer the reflection questions using what you have learned from the lesson and your experimental data. It will be helpful to refer to your chemistry journal notes. Answer questions in complete sentences.
1. Why was the line of best fit method used to determine the experimental value of absolute zero?
2. Which gas law is this experiment investigating? How does your graph represent the gas law under investigation?
3. Using your knowledge of the kinetic molecular theory of gases, describe the relationship between volume and temperature of an ideal gas. Explain how this is reflected in your lab data.
4. Pressure and number of moles remained constant during this experiment. If you wanted to test one of these variables in a future experiment, how would you use your knowledge of gas laws to set up the investigation?
The actual absolute zero temperature in degrees Celsius is 273.15.
Experimental Value of Absolute Zero for Sample 1: -283.6°C
Percent Error for Sample 1: |(-283.6 - (-273.15)) / (-273.15)| x 100 = 3.8%
Experimental Value of Absolute Zero for Sample 2: -288.7°C
Percent Error for Sample 2: |(-288.7 - (-273.15)) / (-273.15)| x 100 = 5.7%
How many moles of gas were in each syringe if the atmospheric pressure in the laboratory is 1.2 atm?Using Sample 1:
P = 1.2 atm
V = 22.0 mL
n = (P * V) / (R * T)
n = (1.2 * 0.0220) / (0.0821 * (12+273))
n = 0.00075 mol
Using Sample 2:
P = 1.2 atm
V = 20.0 mL
n = (P * V) / (R * T)
n = (1.2 * 0.0200) / (0.0821 * (12+273))
n = 0.00069 mol
Conclusion:
The experimental absolute zero value for Sample 1 was -283.6°C with a percent error of 3.8% and for Sample 2 was -288.7°C with a percent error of 5.7%. The experimental absolute zero values were close to the accepted value of -273.15°C, with Sample 1 being closer than Sample 2. Therefore, the data supports the hypothesis that the relationship between volume and temperature of an ideal gas can be used to determine absolute zero.
Possible sources of error that could have impacted the results of this lab include experimental error in measuring the volume and temperature, as well as deviations from ideal gas behavior due to factors such as intermolecular forces.
The investigation can be explored further by testing the effects of changes in pressure and number of moles on the relationship between volume and temperature in ideal gases.
To know more about intermolecular forces, visit:
https://brainly.com/question/9007693
#SPJ1
Complete the statements about the different types of lipids. ______ are the building blocks for many lipids and generally contain an even number of carbon atoms and an unbranched hydrocarbon chain.______ are lipid compounds that contain a fused ring system. These compounds contain three six-membered rings and one five-membered ring, and some of these compounds are found in biological membranes. ______ are formed when a carbohydrate is glycosidically linked to a hydroxyl group of a lipid. These compounds are also found in biological membranes and include gangliosides and cerebrosides. ______ are the storage form of lipids that accumulate in adipose tissue and can be used as metabolic fuel. These compounds have a polar head, made of three ester groups, and a nonpolar fatty acid tail. ______ are made up of a long-chain amino alcohol joined to a fatty acid by either a glycosidic or phosphodiester linkage. These compounds, which are commonly found in the nervous system, do not contain glycerol. ______ are formed when glycerol is esterified to two fatty acids and a phosphoric acid molecule. These compounds are also found in biological membranes.
Answer:
Fatty acids
Steroids
Glycolipids
Triacylglycerols
Sphingolipids
Phospholipids
the diagram represents the reaction of hydrogen gas and oxygen gas to produce water. which statement best describes the reaction? (1 point) responses more energy is needed to break the bonds of the reactants than is released in the formation of the products, so the reaction is exothermic. more energy is needed to break the bonds of the reactants than is released in the formation of the products, so the reaction is exothermic. more energy is released in the formation of the products than is needed to break the bonds of the reactants, so the reaction is endothermic. more energy is released in the formation of the products than is needed to break the bonds of the reactants, so the reaction is endothermic. more energy is needed to break the bonds of the reactants than is released in the formation of the products, so the reaction is endothermic. more energy is needed to break the bonds of the reactants than is released in the formation of the products, so the reaction is endothermic. more energy is released in the formation of the products than is needed to break the bonds of the reactants, so the reaction is exothermic. more energy is released in the formation of the products than is needed to break the bonds of the reactants, so the reaction is exothermic. skip to navigation
The reaction of hydrogen gas and oxygen gas to produce water is an exothermic reaction because more energy is released in the formation of the products than is needed to break the bonds of the reactants.
In other words, more energy is released when the hydrogen and oxygen molecules combine to form water molecules than is needed to break the bonds between the hydrogen and oxygen molecules.
Exothermic reaction- It is a type of reaction in which the two atoms react with each other to form a stable compound and release energy in the process of doing so.
To learn more about "reaction", visit: https://brainly.com/question/11231920
#SPJ11
how does absorbance relate to concentration in solutions?
Absorbance is the measure of how much light is absorbed by a sample solution at a particular wavelength. The Beer-Lambert law states that there is a linear relationship between the absorbance of a solution and its concentration.
Specifically, absorbance is directly proportional to the concentration and path length of the sample solution, and inversely proportional to the intensity of the incident light. This relationship can be expressed mathematically as A = ɛcl, where A is the absorbance, ɛ is the molar absorptivity (a constant unique to each substance), c is the concentration of the solution in mol/L, and l is the path length of the sample cell in cm.
To know more about Beer-Lambert, here
brainly.com/question/30216846
#SPJ4
the extrinsic pathway of coagulation is initiated by the
The extrinsic pathway of coagulation is initiated by the exposed endothelial collagen. Endothelial cells are cells that line the interior surface of blood vessels, forming a barrier between the blood and the underlying tissues. Collagen is a protein that is an important component of the extracellular matrix that supports and strengthens tissues throughout the body.
The interaction of tissue factor with factor VIIa (the activated form of factor VII) triggers a series of reactions that ultimately lead to the activation of factor X and the formation of a blood clot. This process involves the formation of a complex known as the extrinsic tenase complex, which includes tissue factor, factor VIIa, calcium ions, and phospholipids. The extrinsic tenase complex activates factor X, which then leads to the activation of thrombin and the subsequent formation of fibrin, the protein that forms the basis of a blood clot.
The extrinsic pathway is called the "extrinsic" pathway because it is initiated by factors that are external to the blood itself, namely tissue factor. In contrast, the intrinsic pathway of coagulation is initiated by factors that are present within the blood itself, such as platelets and activated factor XII.
Overall, the extrinsic pathway of coagulation is an important component of the body's response to tissue injury, and it plays a critical role in preventing excessive bleeding and promoting wound healing.
Learn more about coagulation here brainly.com/question/8888375
#SPJ4
¿el electroscopio Puede medir cargas cuantitativas? si o no y porque
DOY CORONA
No, an electroscope cannot measure quantitative charges because it only indicates the presence or absence of charge.
An electroscope is a straightforward tool used to find electrical charges. Based on the idea that like charges repel one another, it causes an object, such as a leaf or a needle, to move away from another that is charged. An electroscope, however, cannot reveal the magnitude or size of the charge that is present.
A more advanced instrument, like an electrometer, which is capable of measuring small electric charges with a high degree of accuracy, would be required to measure quantitative charges. The output of detectors like Geiger counters and particle detectors, as well as static charges, are frequently measured using electrometers in scientific research and engineering applications.
Learn more about electroscope
brainly.com/question/10470196
#SPJ4
The complete question is-
Can an electroscope measure quantitative charges?
