Answer:
1.25 m
Explanation:
From the question given above, the following data were obtained:
Force ratio = 2.5
Distance of load from the fulcrum = 0.5 m
Distance of effort =.?
The distance of the effort from the fulcrum can be obtained as illustrated below:
Force ratio = Distance of effort / Distance of load
2.5 = Distance of effort / 0.5
Cross multiply
Distance of effort = 2.5 × 0.5
Distance of effort = 1.25 m
Therefore, the distance of the effort from the fulcrum is 1.25 m
The Sun's energy comes from which nuclear reaction?
Answer:
the sun energy comes from nuclea fution
A neutral object must have _______________ A. An equal amount of positive and negative charges B. no charges present at all C. more positive than negative charges D. more negative than positive
Answer:
A
Explanation:
Consider a question you may not have considered before. Suppose you have a mole of sodium in a container that contains nothing that it will react with. A mole of anything is 6.02 * 10^23 (in this case atoms).
Suppose that every one of those atoms has contributed 1 electron to something.
Do you think it would be safe to touch the container knowing that there are 6.02 * 10^23 positive charges all eager to get another electron, because they don't like repelling each other.
Safe or not? I'll give you a hint. A lightning bolt does not contain anywhere near 6.02*10^23 charges. No where near.
So -- since you never get a shock from just touching anything, There must not be electrons or ions present.
The answer is A
A box of tools rests in the back of a pickup truck. The truck accelerates to the north and the box remains at rest in the truck. The direction of the friction force on the box of tools is _____.
Answer:
The direction of friction force is toards north.
Explanation:
A tool box is at rest on the back of a track. The truck is accelerating towards north.
As the frame of reference is acceleratinf so it is a non inertial frame of reference.
Thus, teh toolkit experineces a pseudo force towards the south direction.
According to the question, the toolbox is at rest so the fiction force is balances by teh psheudoforce, and thus teh friction force is acting toards north.
in a chemical equation, where do the products appear
Answer:
products would appear after the raw materials
Explanation:
raw material + raw material = product (anything deriving from combining two materials)
A gas at a pressure p is compressed to half it original volume and twice its original temperature. The new pressure is
Answer:
4p
Explanation:
If you halve the volume the pressure will double as they are inversely proportional. If you double the temperature the particles have double the kinetic energy so the pressure will double again.
So:
p×2×2 = 4p
Answer:
P V = n R T
P2 V2 / (P1 V1) = T2 / T1
P2 = (T2 / T1) (V1 / V2) P1 = 2 * 2 = 4
Capacitance (C) is measured in farads, where 1 farad is equivalent to 1 coulomb per volt. Resistance (R) is measured in ohms, and 1 ohm is equal to 1 volt per ampère. The coulomb is defined as the amount of charge passing when a current of 1 ampère flows for 1 second. What is the unit of RC expressed in its simplest form?
When fundamental units are combined, they result in derived units. RC (which means Resistance Capacitance) is a derived unit and its unit in the simplest form is Coulomb per Ampere (C/A)
Given that:
Capacitance (C) [tex]\to[/tex] Farads (f)
and
[tex]1f = 1\frac CV[/tex] ----- 1 farad = 1 capacitance per volt
Resistance (R) [tex]\to[/tex] Ohms [tex]\Omega[/tex]
[tex]1 \Omega = 1\frac{V}{A}[/tex]
The unit of RC is the product of the unit of R by the unit of C.
i.e.
[tex]RC = 1f \times 1\Omega[/tex]
Substitute [tex]1f = 1\frac CV[/tex]
[tex]RC = 1\frac CV \times 1\Omega[/tex]
Substitute [tex]1 \Omega = 1\frac{V}{A}[/tex]
[tex]RC = 1\frac CV \times 1\frac VA[/tex]
Cancel out volts (V)
[tex]RC = 1\frac CA[/tex]
[tex]\frac CA[/tex] means Coulomb per Ampere
Hence, the unit of RC is Coulomb per Ampere.
Read more about units at:
https://brainly.com/question/10167613
A cube of aluminum of mass 4kg is immersed totally in kerosene. It was found that 50g of kerosene was displaced, if the density of the kerosene is 13.5kg/m³, calculate the length and density of the aluminum cube
The length and density of the aluminum cube is 15.46 cm and 1,081.1 kg/m³ respectively
Volume of the aluminumThe volume of the aluminum is equal to the weight of the kerosene displaced.
V = 0.05 kg / 13.5 kg/m³
V = 3.7 x 10⁻³ m³
Density of the aluminumdensity = mass/volume
density = 4 kg / 3.7 x 10⁻³ m³
density = 1,081.1 kg/m³
Length of the aluminumV = L³
L = ∛V
L = ∛(3.7 x 10⁻³)
L = 0.1546 m
L = 15.46 cm
Thus, the length and density of the aluminum cube is 15.46 cm and 1,081.1 kg/m³ respectively.
Learn more about density here: https://brainly.com/question/6838128
#SPJ1
What does the sun use for nuclear fusion?
Answer:
The sun uses hydrogen for nuclear fusion.
Answer:
Hydrogen
Explanation:
01:28:29
What type of relationship occurs when two variables both increase or decrease together?
O an inverse relationship
O a positive relationship
a direct relationship
O an indirect relationship
Answer:
an inverse relationship
The boiling point of a substance is _72 degree Celsius. This temperature will be equivalent to Kelvin scale is-------.
Answer:
345 K
Explanation:
Temperature can be defined as a measure of the degree of coldness or hotness of a physical object.
Generally, it is measured with a thermometer and its units are Celsius (°C), Kelvin (K) and Fahrenheit (°F).
Given the following data;
Boiling point = 72°CTo convert the temperature in degree Celsius to Kelvin, we would use the following mathematical expression;
Kelvin = 273 + °C
Substituting into the formula, we have;
Kelvin = 273 + 72
Kelvin = 345 K
Therefore, the temperature of 72°C will be equivalent to 345 K on the Kelvin scale.
TRUE OR FALSE. when an object changed direction without changing its speed, it is not accelerating
Answer:
True.
Explanation:
The velocity vector is constant in magnitude but changing in direction. Because the speed is constant for such a motion, many students have the misconception that there is no acceleration. ... But the fact is that an accelerating object is an object that is changing its velocity.
a body is moving along a circular path 'r'. what will be the distance and displacement of the body when it completed half a revolution?
After half of a revolution ...
==> Distance = π•r
==> Displacement = 2•r
A boy is moving a stone in a horizontal circle by mean of a thread attached to ut. The length if the threads us 1 m and the weight of the stone is 0.02 kg . The maximum tension of the thread can withstand us 1 ×10 ^-4 N. The boy is gradually increasing the speed if rotation. At what speed if the stone does the thread break ?
Answer:
Explanation:
This is a centripetal force problem where tension supplies the centripetal force needed to keep the stone moving in a circular manner. That formula for that is
[tex]F_c=T=\frac{mv^2}{r}[/tex] and filling in what we know:
[tex]1*10^{-4}=\frac{.02v^2}{1}[/tex] and solve that for v:
[tex]v=\sqrt{\frac{1*10^{-4}}{.02} }[/tex] which gives us a velocity of .07 m/s. Anything greater than this will break the string.
please help me with this question
Answer:
1. 12 V
2a. R₁ = 4 Ω
2b. V₁ = 4 V
3a. A = 1.5 A
3b. R₂ = 4 Ω
4. Diagram is not complete
Explanation:
1. Determination of V
Current (I) = 2 A
Resistor (R) = 6 Ω
Voltage (V) =?
V = IR
V = 2 × 6
V = 12 V
2. We'll begin by calculating the equivalent resistance. This can be obtained as follow:
Voltage (V) = 12 V
Current (I) = 1 A
Equivalent resistance (R) =?
V = IR
12 = 1 × R
R = 12 Ω
a. Determination of R₁
Equivalent resistance (R) = 12 Ω
Resistor 2 (R₂) = 8 Ω
Resistor 1 (R₁) =?
R = R₁ + R₂ (series arrangement)
12 = R₁ + 8
Collect like terms
12 – 8 =
4 = R₁
R₁ = 4 Ω
b. Determination of V₁
Current (I) = 1 A
Resistor 1 (R₁) = 4 Ω
Voltage 1 (V₁) =?
V₁ = IR₁
V₁ = 1 × 4
V₁ = 4 V
3a. Determination of the current.
Since the connections are in series arrangement, the same current will flow through each resistor. Thus, the ammeter reading can be obtained as follow:
Resistor 1 (R₁) = 4 Ω
Voltage 1 (V₁) = 6 V
Current (I) =?
V₁ = IR₁
6 = 4 × I
Divide both side by 4
I = 6 / 4
I = 1.5 A
Thus, the ammeter (A) reading is 1.5 A
b. Determination of R₂
We'll begin by calculating the voltage cross R₂. This can be obtained as follow:
Total voltage (V) = 12 V
Voltage 1 (V₁) = 6 V
Voltage 2 (V₂) =?
V = V₁ + V₂ (series arrangement)
12 = 6 + V₂
Collect like terms
12 – 6 = V₂
6 = V₂
V₂ = 6 V
Finally, we shall determine R₂. This can be obtained as follow:
Voltage 2 (V₂) = 6 V
Current (I) = 1.5 A
Resistor 2 (R₂) =?
V₂ = IR₂
6 = 1.5 × R₂
Divide both side by 1.5
R₂ = 6 / 1.5
R₂ = 4 Ω
4. The diagram is not complete
You are accelerating upwards in an elevator when the net force on you increases. What happens to the acceleration
Answer:
the acceleration of the elevator is increasing
Explanation:
For this exercise we propose the solution using Newton's second law
F -W = m a
F = m (g + a)
If the net force increases, it implies that the acceleration of the elevator is increasing, since the acceleration of gravity is constant as the ascent is accelerating.
Every living thing gives off thermal energy in the form of which type of
electromagnetic waves?
O A Visible light
B. Gamma rays
C. infrared
O D. Ultraviolet
Every living things gives off thermal energy in the form electromagnetic waves. The electromagnetic wave releasing off is infrared radiation. Hence, option C is correct. .
What are electromagnetic waves ?Electromagnetic waves are associated with a combined electric field and magnetic field. They can pass through vacuum as well as through a medium. Unlike mechanical waves, all the electromagnetic waves are transverse waves.
The oscillation of particles is in the direction perpendicular to the wave propagation. There are 7 types of radiations in the electromagnetic spectrum. The light we see is called visible light.
The infrared waves are located in between microwaves and visible light. Every living thing gives off thermal energy in the form of infrared radiation. Hence, option C is correct.
Find more on infrared waves:
https://brainly.com/question/30309627
#SPJ2
9. In a __________ collision, 100% of both vehicles' speed is directed towards the point of impact. A. head-on B. rear-end C. side-impact
Answer: A
Explanation:
:)
A system of releases 125kJ of heat while 104kJ of work is done in the system. Calcilate the change om imternal energy (in kJ)
Answer:
DU = 21 KJ
Explanation:
Given the following data;
Quantity of heat = 125 KJ
Work = 104 KJ
To find the change in internal energy;
Mathematically, the change in internal energy of a system is given by the formula;
DU = Q - W
Where;
DU is the change in internal energy.
Q is the quantity of energy.
W is the work done.
Substituting into the formula, we have;
DU = 125 - 104
DU = 21 KJ
Answer all these questions
What type of waves can only travel through a medium?
What is pitch?
What is the relationship between amplitude and volume?
How does the type of medium affect a sound wave?
Describe the relationship between frequency and wavelength.
Answer:
mechanical waves,
.
the quality of a sound governed by the rate of vibrations producing it; the degree of highness or lowness of a tone.
.
If the amplitude increases the volume increases and vice versa.
.
The type of medium affects a sound wave as sound travels with the help of the vibration in particles.
.
The higher the frequency, the shorter the wavelength.
Explanation:
Answer:
1 . Soundwave
2. pitch are sounds that are high or low corresponding and according to a certain frequency measured in Hertz
3. volume is the increase in sound or decrease in sound how loud or soft something is while amplitude is strength of sound
4. frequency is measured in Hertz one wave per second and wavelength is distance between corresponding points of two recurring and consecutive sound waves
A spring attached to a mass is at rest in the initial position (not shown). The spring is compressed in position A and is then released, as shown in position B. Which equation describes conservation of energy in position A?
Answer:
Explanation:
When the spring is compressed, it is compressed to its amplitude (whereas equilibrium is the spring's natural length with no mass attached to it and displacement is the spring's reaction to a mass hung on the end of it without any "extra" pushing or pulling on the mass). It is at the amplitude where the spring experineces max potential energy, which is choice 2, E = mph
Answer:
its c
Explanation:
...
Having the correct posture and the degree or severity of braking, acceleration and steering inputs have a direct result on the ability of a motorist to effectively address changes in __________?
Answer: Vehicle Balance
Explanation:
Vehicle balance simply means how the weight of a vehicle is distributed across its tires which connects to the road
It should be noted that there'll be a shift in the balance of a vehicle when the braking, acceleration, or turning bring about a scenario in which the weight of th vehicle moves from one area to another.
You can see stars brighter than magnitude +6 with your naked eye under dark sky conditions, and you can also see the full moon at magnitude –13. (You can glance at the Sun, which is at magnitude –27, but you can't safely look at the Sun.) Given these limits, what is the dynamic range of the naked eye?
A vehicle starts from rest with a uniform acceleration of 2m/s2.Find the final velocity of the vehicle after covering a distance of 400m
Answer:
40
Explanation:
vi=0
a=2
vf=?
d=400
vf^2=vi^2+2ad
vf^2=0+2×2×400=1600
vf=√1600=40m/s
If displacement has a magnitude AND direction is it a scalar or vector quantity?
scalar
vector
Explanation:
Obviously vector quantity
the weight of body is less at moon than its weight is more at earth
Answer:
Gravity
Explanation:
There's no gravity on space so you're floating
Why does An apple, potato, and onion all taste the same if you eat them with your nose plugged
1) Convert the following:
I) 65 kg into g
ii) 87570 seconds into hour
iii) 7.5 km into m
Answer:
65000g
24.325 hrs
7500m
Answer:
I) 65000 g II)24.325 hours III)7500 m
Explanation:
I) 1 kg = 1000 g
65 kg = 65 * 1000 g = 65000 g
II) 1 hour = 3600 seconds
1 second = 1/3600 hours
87570 seconds = 87570 * 1/3600 hours =24.325 hours
III) 1 km = 1000 m
7.5 km = 7.5 * 1000 m = 7500 m
What information does the period number give about an atom?
Answer:All of the elements in a period have the same number of atomic orbitals. For example, every element in the top row (the first period) has one orbital for its electrons. All of the elements in the second row (the second period) have two orbitals for their electrons.Explanation:
Answer:
It tells us the principle quantum shell in which the element lies in. In other words, it shows the total number of electron shells the atom has
6. traction a. friction between a tire and the road.b. pushes a moving object out of a curve and into a straight linec. the ability of a car to hold a straight lined. a road higher in the center than on either edge 7. kinetic energy a.a force that keeps objects moving in a straightb. reduces the effects of inertiac. energy of motiond. a road higher in the center than on either edge 8. force of impact a. a force that keeps objects moving in a straight line.b. a road higher in the center than on either edgec. the force with which a moving vehicle hits another objectd. perception distance, reaction distance, and braking distance
Answer:
6. a. friction between a tire and the road
7. c. energy of motion
8. c. the force with which a moving vehicle hits another object
Explanation:
6. As a car moves along the road, the tires push back against the ground. As tires push back against the ground, the road exerts and opposing force to the motion of the tires. This opposing force is the friction between the tires and the road. This opposing force between the tires and the rad is called traction.
So, the answer is a
7. As an object moves, it has energy. This energy due to its motion is called kinetic energy.
So, the answer is c
8. When a moving vehicle hits another object, it exerts a force on the object. The process of the vehicle hitting the other object is called impact and the force exerted on the object is called the force of impact.
So, the answer is c.
As compared with lower kVp exposures, when using high kVp will result in a scattered photon that is of ________ energy. Group of answer choices
Answer:
Increased
Explanation:
kVp is an acronym for kilovoltage peak, and it determines the strength x-ray beam strength, and the quality of the beam, it is a measure of the highest that the x-ray machine produces. A 60 kVp x-ray will produce photons with a maximum energy of 60 kilovolts while a 70 kVp will produce photons having 70 kilovolts as the maximum energy
Therefore, a high kVp exposure will result in scattered photon that is of increased energy compared with a lower kVp exposure.
