Answer:
=(J8 - SUM(D17:D20))
Explanation:
Required
Add D17 to D20
Subtract the result from J8
Save the result in K8
To do this, we make use of a nested bracket.
The innermost bracket is to add up D17 To D20 using the sum function.
i.e. SUM(D17:D20)
While the outermost bracket will subtract the calculated sum from J8.
=(J8 - SUM(D17:D20))
The SUM function is used to Adds values, in which users can add different values, in cells or range references or a mix of each of them, and the further calculation can be defined as follows:
In this question, we use the "=(J8 - SUM(D17:D20))" function that's description can be defined as follows:
D17 to D20 AddSubtract the J8 resultSave K8 resultsWe use a nested bracket to do this.D17-D20 is added to the innermost bracket with the sum function.SUM, i.e. (D17:D20)The calculated amount from J8 is taken from the outermost bracket.Therefore the final answer is "=(J8 - SUM(D17:D20))".
Learn more:
brainly.com/question/24245
Suppose a company A decides to set up a cloud to deliver Software as a Service to its clients through a remote location. Answer the following [3] a) What are the security risks for which a customer needs to be careful about? b) What kind of infrastructural set up will be required to set up a cloud? c) What sort of billing model will such customers have?
Answer:
perdonnosee
Explanation:
Which of the following will cause you to use more data than usual on your smartphone plan each month?
a. make a large number of outbound calls
b. sending large email files while connected to wifi
c. streaming movies from Netflix while not connected to Wi-Fi
d. make a large number of inbound calls
Write a function named multiply_by_20. The function should accept an argument and display the product of its argument multiplied by 20
Answer:
def multiply_by_20(num):
print(num * 20)
Explanation:
def multiply_by_20(num):
print(num * 20)
# Testing the function here. ignore/remove the code below if not required
multiply_by_20(2)
multiply_by_20(7)
multiply_by_20(5)
Which describes the relationship between enterprise platforms and the cloud?
Answer:
All enterprise platforms are cloud based.
A backbone network is Group of answer choices a high speed central network that connects other networks in a distance spanning up to several miles. a group of personal computers or terminals located in the same general area and connected by a common cable (communication circuit) so they can exchange information. a network spanning a geographical area that usually encompasses a city or county area (3 to 30 miles). a network spanning a large geographical area (up to thousands of miles). a network spanning exactly 200 miles with common carrier circuits.
Answer:
a high speed central network that connects other networks in a distance spanning up to several miles.
Explanation:
A backbone network functions just like the human backbone providing support for network systems by offering a network infrastructure that allows small, high speed internet connectivity. It is a principal data route between large interconnected networks which offers connection services spanning several miles. Most local area networks are able to connect to the backbone network as it is the largest data connection on the internet. This backbone networks are mainly utilized by large organizations requiring high bandwidth connection.
The Janitorial and Cafeteria departments are support departments. Samoa uses the sequential method to allocate support department costs, first allocating the costs from the Janitorial Department to the Cafeteria, Cutting, and Assembly departments. Determine the proportional (percentage) usage of the Janitorial Department by the:
Complete Question:
Departmental information for the four departments at Samoa Industries is provided below. Total Cost Cost Driver Square Feet Number of employees Janitorial $150,000 square footage serviced 200 Cafeteria 50,000 Number of employees 20,000 Cutting 1,125,000 4,000 120 Assembly 1,100,000 16,000 The Janitorial and Cafeteria departments are support departments Samoa uses the sequential method to allocate support department costs, first allocating the costs Department to the Cafeteria, Cutting and Assembly departments Determine the proportional (percentage) usage of the Janitorial Department by the a. Cafeteria Department b. Cutting Department c. Assembly Department
Answer:
Samoa Industries
Proportional (percentage) usage of the Janitorial Department:
Cafeteria = 50%
Cutting = 10%
Assembly = 40%
Explanation:
a) Data and Calculations:
Total Cost Cost Driver Square Feet Number of
employees
Janitorial $150,000 Square footage serviced 200 40
Cafeteria 50,000 Number of employees 20,000 12
Cutting 1,125,000 4,000 120
Assembly 1,100,000 16,000 40
Proportional (percentage) usage of the Janitorial Department:
Cafeteria = 50% (20,000/40,000 * 100)
Cutting = 10% (4,000/40,000 * 100)
Assembly = 40% (16,000/40,000 * 100)
Cost Allocation of the Janitorial Department:
Cafeteria = 50% * $150,000 = $75,000
Cutting = 10% * $150,000 = 15,000
Assembly = 40,% * $150,000 = 60,000
Total = $150,000
Help Pls
I need about 5 advantages of E-learning
Answer:
Explanation:
E-learning saves time and money. With online learning, your learners can access content anywhere and anytime. ...
E-learning leads to better retention. ...
E-learning is consistent. ...
E-learning is scalable. ...
E-learning offers personalization.
Answer:
E- learning saves time and money
E-learning makes work easier and faster
E- learning is convenient
E- learning is consistent
E- learning is scalable
Explanation:
when you learn using the internet, you save a lot of time by just typing and not searching through books
Ellen is working on a form in Access and clicks on the Design tab in the Form Design Tools section. Ellen then clicks on the Controls button and clicks the Label icon. What is Ellen most likely doing to the form?
A.adding a title
B.adding an existing field
C.changing the anchoring setting
D.changing the font of a label
Answer:
D. changing the font of a label
Consider the following generalization of the Activity Selection Problem: You are given a set of n activities each with a start time si , a finish time fi , and a weight wi . Design a dynamic programming algorithm to find the weight of a set of non-conflicting activities with maximum weight.
Answer:
Assumption: Only 1 job can be taken at a time
This becomes a weighted job scheduling problem.
Suppose there are n jobs
Sort the jobs according to fj(finish time)
Define an array named arr to store max profit till that job
arr[0] = v1(value of 1st job)
For i>0. arr[i] = maximum of arr[i-1] (profit till the previous job) or wi(weight of ith job) + profit till the previous non-conflicting job
Final ans = arr[n-1]
The previous non-conflicting job here means the last job with end timeless than equal to the current job.
To find the previous non-conflicting job if we traverse the array linearly Complexity(search = O(n)) = O(n.n) = O(n^2)
else if we use a binary search to find the job Complexity((search = O(Logn)) = O(n.Log(n))
Given two integers that represent the miles to drive forward and the miles to drive in reverse as user inputs, create a SimpleCar object that performs the following operations:Drives input number of miles forwardDrives input number of miles in reverseHonks the hornReports car statusThe SimpleCar class is found in the file SimpleCar.java.100 4the output is:beep beepCar has driven: 96 milesimport java.util.Scanner;public class LabProgram { public static void main(String[] args) { Scanner scnr = new Scanner(System.in); /* Type your code here. */ }}
Answer:
Explanation:
The following code is written in Java. It creates the SimpleCar class with the variables for position, milesForward, and milesReverse. It contains the constructor, Honk, reportStatus, and setter methods needed and as requested. The scanner object is created in the main method and asks the user for the number of miles forward as well as the number of miles in reverse. A test case was created and the output can be seen in the attached image below.
import java.util.ArrayList;
import java.util.Scanner;
class Brainly {
public static void main(String[] args) {
Scanner in = new Scanner(System.in);
System.out.println("How many miles forward did the car drive?");
int forward = in.nextInt();
System.out.println("How many miles in reverse did the car drive?");
int reverse = in.nextInt();
SimpleCar beep = new SimpleCar(forward, reverse);
beep.Honk();
beep.reportStatus();
}
}
class SimpleCar {
int position;
int milesForward;
int milesReverse;
public SimpleCar(int milesForward, int milesReverse) {
this.milesForward = milesForward;
this.milesReverse = milesReverse;
this.position = 0;
}
public void Honk() {
System.out.println("HONK");
}
public void reportStatus() {
position = milesForward - milesReverse;
System.out.println("Car is " + position + " miles from starting point.");
}
public void setMilesForward(int milesForward) {
this.milesForward = milesForward;
this.position += milesForward;
}
public void setMilesReverse(int milesReverse) {
this.milesReverse = milesReverse;
this.position -= milesReverse;
}
}
What happens when a dataset includes records with missing data?
Answer:
However, if the dataset is relatively small, every data point counts. In these situations, a missing data point means loss of valuable information. In any case, generally missing data creates imbalanced observations, cause biased estimates, and in extreme cases, can even lead to invalid conclusions.
It makes data analysis to be more ambiguous and more difficult.
Missing data is simply the same as saying that there are values and information that are unavailable. This could be due to missing files or unavailable information.
A dataset set with missing data means more work for the analyst. There needs to be a transformation in those fields before the dataset can be used.
Generally speaking missing data could lead to bias in the estimation of data.
A data scientist is a data expert who is in charge of data. He performs the job of data extraction, data analysis, data transformation.
read more at https://brainly.com/question/17578521?referrer=searchResults
Discuss at least five ways of practicing good device care and placement
Answer:
The points according to the given question are provided below.
Explanation:
Batteries are quite a highly crucial part of EVs and should be handled accordingly.Whenever a part becomes obsolete, it should have been substituted every year using an innovative version.Before using an electric car, it should have been fully charged and ready to go.Within a certain duration of time, the gadget needs to be serviced again.Be sure to keep your mobile device or another gadget in such a secure location.A desktop computer is a type of mobile device.
a. true
b. false
A desktop computer is a type of mobile device: B. False.
What is a desktop computer?A desktop computer simply refers to an electronic device that is designed and developed to receive data in its raw form as an input and processes these data into an output that's usable by an end user.
Generally, desktop computers are fitted with a power supply unit (PSU) and designed to be used with an external display screen (monitor) unlike mobile device.
In conclusion, a desktop computer is not a type of mobile device.
Learn more about desktop computer here: brainly.com/question/959479
#SPJ9
Which is the first computer brought in nepal for the census of 2028 B.S
Answer:
The first computer brought in Nepal was IBM 1401 which was brought by the Nepal government in lease (1 lakh 25 thousands per month) for the population census of 1972 AD (2028 BS). It took 1 year 7 months and 15 days to complete census of 1crore 12.5 lakhs population.
What do LinkedIn automation tools do?
Answer:
Most of the tools are used to perform simple repetitive tasks that take a lot of time if done manually.
1. Sending Connection requests
2. Running Direct messaging campaigns
3. Endorsing people’s skills.
4. Collecting leads data
5. Extracting data from LinkedIn
With automation, it may seem like you’ve been dealt the ultimate hand.
In addition, some of the latest LinkedIn automation tools run personalized campaigns that result in increasing:
1. Increasing networks
2. Connections
3. Leads
4. Sales
Coral Given three floating-point numbers x, y, and z, output x to the power of y, x to the power of (y to the power of z), the absolute value of x, and the square root of (x * y to the power of z).
Output all results with five digits after the decimal point, which can be achieved as follows:
Put result to output with 5 decimal places
Ex: If the input is:
5.0 2.5 1.5
the output is:
55.90170 579.32402 5.00000 6.64787
Hint: Coral has built-in math functions (discussed elsewhere) that may be used.
Answer:
The program is as follows:
float x
float y
float z
x = Get next input
y = Get next input
z = Get next input
Put RaiseToPower(x,y) to output with 5 decimal places
Put "\n" to output
Put RaiseToPower (x,RaiseToPower (y,z)) to output with 5 decimal places
Put "\n" to output
Put AbsoluteValue(x) to output with 5 decimal places
Put "\n" to output
Put SquareRoot(RaiseToPower (x * y,z)) to output with 5 decimal places
Explanation:
This declares all variables
float x
float y
float z
This gets input for all variables
x = Get next input
y = Get next input
z = Get next input
This prints x^y
Put RaiseToPower(x,y) to output with 5 decimal places
This prints a new line
Put "\n" to output
This prints x^(y^z)
Put RaiseToPower (x,RaiseToPower (y,z)) to output with 5 decimal places
This prints a new line
Put "\n" to output
This prints |x|
Put AbsoluteValue(x) to output with 5 decimal places
This prints a new line
Put "\n" to output
This prints sqrt((x * y)^z)
Put SquareRoot(RaiseToPower (x * y,z)) to output with 5 decimal places
Which of the following definitions best describes the principle of separation of duties?
Answer:
A security stance that allows all communications except those prohibited by specific deny exceptions
A plan to restore the mission-critical functions of the organization once they have been interrupted by an adverse event
A security guideline, procedure, or recommendation manua
lAn administrative rule whereby no single individual possesses sufficient rights to perform certain actions
Predictive Algorithms Identify one use/application in which tprediction might cause significant ethical harms.
a. True
b. False
Your organization network diagram is shown in the figure below. Your company has the class C address range of 199.11.33.0. You need to subnet the address into three subnets and make the best use of the available address space. Which of the following represents the addressing scheme you would apply to the New York office and Toronto Office?
(A) 199.11.33.160/31
(B) 199.11.33.0/25
(C) 199.11.33.128/27
(D) 199.11.33.0/31
(E) 199.11.33.160/30
(F) 199.11.33.128/28
Answer:
aaaa
Explanation:
write a program to input 3 numbers and print the largest and the smallest number without using if else statement
Answer:
def main():
# input
num1 = int(input("Type in a number: "))
num2 = int(input("Type in another number: "))
num3 = int(input("Type in another number: "))
list1 = [num1, num2, num3]
# sorts the array
list1.sort()
# list1[-1] prints the first element in the array
print("The largest number is: " + str(list1[-1]))
# -len(list1) takes the length of the list, in this case 3, and makes it a negative number.
# That negative number is then used as an index for the list1 array in order to print the lowest number.
print("The smallest number is: " + str(list1[-len(list1)]))
main()
Explanation:
Hope this helped :) I left some comments so you know what's going on. You can also use max(list1) and min(list1) but I chose indexing because indexing is the better way of doing stuff like this.
Have a good day!
Virtualization:
a. can boost server utilization rates to 70% or higher.
b. has enabled microprocessor manufacturers to reduce the size of transistors to the width of an atom.
c. uses the principles of quantum physics to represent data.
d. allows smartphones to run full-fledged operating systems.
e. allows one operating system to manage several physical machines.
Prepare an algorithm and draw a corresponding flowchart to compute the sum
and product of all prime numbers between 1 and 50.
Answer:
Explanation:
Given
what is computer? write about computer.
Answer:
Is an electronic device used for storing and processing data.
You are going to purchase (2) items from an online store.
If you spend $100 or more, you will get a 10% discount on your total purchase.
If you spend between $50 and $100, you will get a 5% discount on your total purchase.
If you spend less than $50, you will get no discount.
Givens:
Cost of First Item (in $)
Cost of Second Item (in $)
Result To Print Out:
"Your total purchase is $X." or "Your total purchase is $X, which includes your X% discount."
Answer:
Code:-
using System;
using System.Collections.Generic;
class MainClass {
public static void Main (string[] args) {
int Val1,Val2,total;
string input;
double overall;
Console.Write("Cost of First Item (in $)");
input = Console.ReadLine();
Val1 = Convert.ToInt32(input);
Console.Write("Cost of Second Item (in $)");
input = Console.ReadLine();
Val2 = Convert.ToInt32(input);
total=Val1+Val2;
if (total >= 100)
{
overall=.9*total;
Console.WriteLine("Your total purchase is $"+overall);
}
else if (total >= 50 & total < 100)
{
overall=.95*total;
Console.WriteLine("Your total purchase is $"+overall);
}
else
{
Console.WriteLine("Your total purchase is $"+total);
}
}
}
Output:
How many cost units are spent in the entire process of performing 40 consecutive append operations on an empty array which starts out at capacity 5, assuming that the array will grow by a constant 2 spaces each time a new item is added to an already full dynamic array
Answer:
Explanation:
260 cost units, Big O(n) complexity for a push
Write a program that solves the following problem:
One marker costs 80 cents. A package of five markers costs $3.50. This encourages people to buy complete packages rather than having to break packages open. The tax is 6.5% of the total. The shipping cost is 5% of the total (before tax). Your program will prompt for a number of markers (an integer). It will calculate and display:
⢠The number of complete packages of markers
⢠The number of separate markers (hint: use // and %)
⢠The cost for the markers before shipping and tax
⢠The cost of shipping
⢠The cost of tax
⢠The total cost of the markers after shipping and tax are added (the grand total)
Answer:
def main():
singleMarkerPrice = 0.80
packageOfMarkersPrice = 3.50
tax = 0.065
shipping = 0.050
userInput = int(input("How many markers do you want? "))
amountOfPackages = 0
singleMarkers = 0
if userInput % 5 == 0:
amountOfPackages = userInput / 5
else:
amountOfPackages = userInput // 5
singleMarkers = userInput % 5
# Just for syntax so if the single marker amount is one, it prints package instead of packages
if amountOfPackages == 1:
print("You have " + str(int(amountOfPackages)) + " complete package")
else:
print("You have " + str(int(amountOfPackages)) + " complete packages")
# Just for syntax so if the single marker amount is one, it prints marker instead of markers
if singleMarkers == 1:
print("You have " + str(int(singleMarkers)) + " single marker")
else:
print("You have " + str(int(singleMarkers)) + " single markers")
totalAmountBeforeTax = (amountOfPackages * packageOfMarkersPrice) + (singleMarkers * singleMarkerPrice)
print("The total amount before tax comes out to " + str(float(totalAmountBeforeTax)))
costOfShipping = float(round((totalAmountBeforeTax * shipping), 2))
costOfTax = float(round((totalAmountBeforeTax * tax), 2))
print("The cost of shipping is " + str(costOfShipping))
print("The cost of tax is " + str(costOfTax))
totalAmount = totalAmountBeforeTax + costOfShipping + costOfTax
print("The total amount comes out to " + str(round(totalAmount, 2)))
main()
Explanation:
This should be correct. If it isn't let me know so I can fix the code.
Write a Python program stored in a file q1.py to play Rock-Paper-Scissors. In this game, two players count aloud to three, swinging their hand in a fist each time. When both players say three, the players throw one of three gestures: Rock beats scissors Scissors beats paper Paper beats rock Your task is to have a user play Rock-Paper-Scissors against a computer opponent that randomly picks a throw. You will ask the user how many points are required to win the game. The Rock-Paper-Scissors game is composed of rounds, where the winner of a round scores a single point. The user and computer play the game until the desired number of points to win the game is reached. Note: Within a round, if there is a tie (i.e., the user picks the same throw as the computer), prompt the user to throw again and generate a new throw for the computer. The computer and user continue throwing until there is a winner for the round.
Answer:
The program is as follows:
import random
print("Rock\nPaper\nScissors")
points = int(input("Points to win the game: "))
player_point = 0; computer_point = 0
while player_point != points and computer_point != points:
computer = random.choice(['Rock', 'Paper', 'Scissors'])
player = input('Choose: ')
if player == computer:
print('A tie - Both players chose '+player)
elif (player.lower() == "Rock".lower() and computer.lower() == "Scissors".lower()) or (player.lower() == "Paper".lower() and computer.lower() == "Rock".lower()) or (player == "Scissors" and computer.lower() == "Paper".lower()):
print('Player won! '+player +' beats '+computer)
player_point+=1
else:
print('Computer won! '+computer+' beats '+player)
computer_point+=1
print("Player:",player_point)
print("Computer:",computer_point)
Explanation:
This imports the random module
import random
This prints the three possible selections
print("Rock\nPaper\nScissors")
This gets input for the number of points to win
points = int(input("Points to win the game: "))
This initializes the player and the computer point to 0
player_point = 0; computer_point = 0
The following loop is repeated until the player or the computer gets to the winning point
while player_point != points and computer_point != points:
The computer makes selection
computer = random.choice(['Rock', 'Paper', 'Scissors'])
The player enters his selection
player = input('Choose: ')
If both selections are the same, then there is a tie
if player == computer:
print('A tie - Both players chose '+player)
If otherwise, further comparison is made
elif (player.lower() == "Rock".lower() and computer.lower() == "Scissors".lower()) or (player.lower() == "Paper".lower() and computer.lower() == "Rock".lower()) or (player == "Scissors" and computer.lower() == "Paper".lower()):
If the player wins, then the player's point is incremented by 1
print('Player won! '+player +' beats '+computer)
player_point+=1
If the computer wins, then the computer's point is incremented by 1
else:
print('Computer won! '+computer+' beats '+player)
computer_point+=1
At the end of the game, the player's and the computer's points are printed
print("Player:",player_point)
print("Computer:",computer_point)
When you expect a reader of your message to be uninterested, unwilling, displeased, or hostile, you should Group of answer choices begin with the main idea. put the bad news first. send the message via e-mail, text message, or IM. explain all background information first.
Answer:
explain all background information first.
Explanation:
Now if you are to deliver a message and you have suspicions that the person who is to read it might be uninterested, unwilling, hostile or displeased, you should put the main idea later in the message. That is, it should come after you have provided details given explanations or evidence.
It is not right to start with bad news. As a matter of fact bad news should not be shared through mails, IM or texts.
Write a program that will generate a personalized invitation within a text file for each guest in the guest list file using the event information found in the event details file. Put all the generated invitation files in a directory called invitations. Ensure that the name of each invitation file uniquely identifies each guest's invitation
Answer:
Code:
import os # os module to create directory
event_file = open("event_details.txt", "r") # Getting event file
event_details = "" # event details to be stored
for row in event_file: # traversing through the event_file
event_details += row # appending event details
os.mkdir("./invitations") # make directory in the same parent directory
names = open("guest_list.txt", "r") # getting names of the people
for name in names: # traversing through names in guest_list file
name = name.replace('\n', '') # removing the ending '\n' from the name
invitation_msg = "Hi! " + name + ", You are heartly invited in the Ceremony.\nAt " + event_details # Generating the invitation message
file_name = '_'.join(name.split(' ')) # Spliting name in space and joining with the '_'
file_path = "./invitations/" + file_name + ".txt" # Generating each file path
invite_file = open(file_path, "w") # Creating the file for each name
invite_file.write(invitation_msg) # Write invitation to file
Output:
Suppose you were charged with putting together a large LAN to support IP telephony (only) and that multiple users may want to carry on a phone call at the same time. Recall that IP telephony digitizes and packetizes voice at a constant bit rate when a user is making an IP phone call. How well suited are these four protocols for this scenario
Answer:
TDMA: Time-division multiple access (TDMA) will operate effectively.
CSMA: Carrier-sense multiple access (CSMA) will NOT operate properly.
Slotted Aloha: Slotted Aloha will NOT perform effectively.
Token passing: Token passing will operate effectively.
Explanation:
Note: This question is not complete. The complete question is therefore provided before answering the question as follows:
Suppose you were charged with putting together a LAN to support IP telephony (only) and that multiple users may want to carry on a phone call at the same time. Recall that IP telephony digitizes and packetizes voice at a constant bit rate when a user is making an IP phone call. How well suited are these four protocols for this scenario?
TDMA:
CSMA:
Slotted Aloha:
Token passing:
Provide a brief explanation of each answer.
The explanation of the answers is now provided as follows:
TDMA: Time-division multiple access (TDMA) will operate effectively in this situation because it provides a consistent bit rate service of one slot every frame.
CSMA: Because of collisions and a changing amount of time to access the channel, Carrier-sense multiple access (CSMA) will NOT operate properly in this situation. Also, the length of time it takes to access a channel is not limited.
Slotted Aloha: Just like CSMA, Slotted Aloha will NOT perform effectively in this situation because of collisions and a different amount of time to access the channel. Also, the length of time it takes to access a channel is limitless.
Token passing: Token passing will operate effectively in this case because each station has a turn to transmit once per token round, resulting in a service with an effectively constant bit rate.
