in the absence of an external magnetic field, can we say that one electron con- figuration has a lower energy than the other?

The two parakeets sitting on the swing with a combined center of mass 16.0 cm below the pivot swings with a frequency of 1.21Hz.

Given the data in the question

Length of pendulum; L=16.0cm =0.16m

Frequency; f=

Using the simple pendulum equation of time:

T2π = √L/9 -------let this be equation 1

Where T is the period of time, L is the length of the pendulum and g is the acceleration due to gravity(9.8m/s² ).

Also formula for Frequency:

f=1/T ------------let this be equation 2

Lets substitute equation 1 into equation 2

f = 1/2π√L/9

f = 1/2π√9/L

We substitute or values into the equation

f=1/2π√[9.8/0.16]

f=1/2π√[57.647-2]

f=1/2π*7.59256s

f=1.21 hZ

Therefore, the two parakeets sitting on the swing with a combined center of mass 16.0 cm below the pivot swings with a frequency of 1.21Hz.

To learn more about frequency refer to :

https://brainly.com/question/254161

#SPJ4

The draw of the earth on the apple and the pull of the apple on the earth are forces operating in pairs (number of pairs, not individual forces).

Since there is no net force acting on the item while it is resting , the downward force (weight) must counterbalance the force acting upward (normal force). Weight travels downhill, therefore it is always negative. For an item to be at rest, all of the forces must be equal to 0.

According to Newton's first rule, in order to have no net force exerted on an object, it must be at rest. Because if there is a total force acting on the object, it will change velocity. It will accelerate.

To know more about Force visit

brainly.com/question/13191643

#SPJ4

The number of times the train accelerated is 3 times.

option 3 is the correct answer.

The number of times the train accelerates in the given scenario depends on the speed or velocity of the train at every given time.

a = Δv / Δt

where;

From the formula given above, the train will only accelerate whenever there is a change in the velocity of the train. If the velocity of the train is constant, then the acceleration of the train will be zero.

The number of acceleration of the train in the given scenario is determined as follows;

Thus, from the illustration given above, the train change its speed three times and accelerated in those situation.

Learn more about acceleration here: https://brainly.com/question/14344386

#SPJ1

The focal length of the mirror is 50cm.

This refers to the distance from the lens or mirror to the focal point(F). It is measured in centimeters, cm or meters,m.

Formula for calculating the focal length of the mirror:

f = R * 2

Where,

f = focal length

R = the radius of curvature

What is a focal point (F)?

This refers to the point where by rays or waves meet after reflection or refraction, or the point from which diverging rays or waves appear to proceed.

In the question:

R = 25cm

f = R * 2

Substituting the values we have:

f = 25cm* 2

f = 50cm

Hence, the focal length of the mirror is 50cm.

Learn more about focal length on

https://brainly.com/question/13885819

#SPJ1

0.32 m/s²  the acceleration of a 250000 kg jumbo jet just before takeoff when the thrust on the aircraft is 80000 nn.

Acceleration the rate at which the speed and direction of a moving object vary over time. A point or object going straight forward is accelerated when it accelerates or decelerates. Even though the speed remains constant, motion on a circle accelerates because the directions is always shifting. Due to the fact that it includes both magnitude and direction, velocity is a quantity. As the rate at which velocity changes, acceleration is likewise a vector quantity.

The formula may be used to determine an object's acceleration given its mass and the force acting on it.

a= f/m

f is the force

m is the mass

a = 80000 / 250000

a = 0.32 m/s²

To know more about acceleration visit:

https://brainly.com/question/12550364

#SPJ4

The birdman needs to soar 86.43m in the air to hit the bucket.

The ball's diameter, d, and the amount of time, t, it takes to cross the photogate can both be used to calculate the beginning horizontal velocity. Vo = d/t, then.

Time of motion of the birdman

The duration of the birdman's motion is the amount of time it takes for him to soar to his highest point.

R = Vₓt

where;

R is the birdman's motion's range or his horizontal distance.

Time of motion is t.

The horizontal speed is Vx.

t = R/Vₓ

t = 147/ 35

t = 4.2 seconds

Maximum height the missile has climbed

h = ¹/₂gt²

where;

The birdman's height is measured in h.

Gravitational acceleration, or g,

h = ¹/₂(9.8)(4.2)²

h = 86.43 m

The birdman must therefore fly to a height of 86.43m in order to hit the bucket.

To know more about horizontal distance visit:-

https://brainly.com/question/10093142

#SPJ1

The parameter of the dark energy equation of state is viewed as an arbitrary constant with a value falling between the range $w in [-1.5, -0.5]$, the upper and lower bounds of which are determined by recent measurements. We get scale factor approximations with better than 1% accuracy.

Mass of a solid substance per unit volume. The equation for density is d = M/V, where d represents density, M is mass, and V is volume. Density is often measured in grammes per cubic centimetre. Its mass per unit of volume is a measure of a substance's density. Although the sign can also represent the Latin letter D, it is most frequently used to represent density. Mass divided by volume is the formula for density in mathematics: displaystyle rho = frac mV. where V is the volume, is the density, and m is the mass.

How much mass there is in a specific volume or area is determined by its density. The formula for determining a substance's density is to divide its mass by its volume.

To know more about Density visit:

https://brainly.com/question/29775886

#SPJ4

We can determine if a star is moving toward or away from earth by measuring its brightness.

The correct answer would be:

[tex]\fbox{False}[/tex]

True. The Big Bang Theory is the current scientific explanation for the origin and evolution of the universe. According to this theory, the universe was initially in a state of extremely high density and temperature, and it has been expanding and cooling since its inception.

One reason we cannot directly observe the Big Bang is that the universe's density was so low at that time that there were no solid particles, such as atoms or molecules, that could have formed into stars or galaxies. Instead, the universe was filled with a hot, ionized plasma that was too diffuse to be observed by telescopes. Another reason is that the expansion of the universe has caused the light and other electromagnetic radiation that was emitted during the Big Bang to become redshifted, or stretched out in wavelength, over time. This means that the light from the earliest moments of the universe has shifted into the microwave and radio frequency ranges, which are not visible to the human eye. Therefore, while we can infer some details about the conditions of the early universe based on observations of the cosmic microwave background radiation and the large-scale structure of the universe, we cannot directly observe the Big Bang itself.

To know more about redshift

https://brainly.com/question/13494718

#SPJ4

Answer:

The answer seems to be,

A) The ball is accelerated while it is pushed by the student's hand due to an

A) The ball is accelerated while it is pushed by the student's hand due to anunbalanced force.

(The answer might be wrong. )

N is the total number of full load cycles, and S is the stress change. The area to the left and below the line represents cyclic stress and cycle count combinations for which no fatigue failure is anticipated to happen.

The distribution of forces, often known as stresses, under cyclic stress changes repeatedly throughout time. Imagine one of the huge wheels that propels an aerial lift, like a ski lift, as an illustration.

The plot of every one of these numbers is known as the cyclic stress-strain curve. Following plastic deformation, the material behaves as described by the curve. Typically, this activity differs from the initial action that is assessed in a conventional tensile test.

To know more about Cyclic stress visit:

https://brainly.com/question/13899363

#SPJ4

The height of the cliff, given that her phone landed 20 m away when she accidentally threw her phone with a velocity of 5 m/s is 78.4 m

To determine the height of the cliff, we must first obtain the time taken for her phone to reach the ground. This is obtained as follow:

s = ut

20 = 5 × t

Divide both sides by 5

t = 20 / 5

t = 4 s

Finally, we shall determine the height of the cliff. Details below:

h = ½gt²

h = ½ × 9.8 × 4²

h = 4.9 × 16

h = 78.4 m

Thus, the height of the cliff is 78.4 m

Learn more about height:

https://brainly.com/question/22740770

#SPJ1

Answer:

Below

Explanation:

ESE = 1/2 k d^2

        = 1/2 *  10 N/m * .1 m = .5 J

The car’s average acceleration is 6 meter/second^2.

Acceleration is rate of change of velocity with time. Due to having both direction and magnitude, it is a vector quantity. Si unit of acceleration is meter/second² (m/s²).

Given that: the car can accelerate from rest to 30 m/s in 5 seconds.

Hence, average acceleration of the car = change in speed/time interval

= ( final speed - initial speed)/time interval

= ( 30 m/s - 0 m/s) / 5 second

= (30/5) meter/second^2

= 6 meter/second^2.

Hence, the  average acceleration of the car  is  6 meter/second^2.

Learn more about acceleration here:

brainly.com/question/12550364

#SPJ1

The larger objects are rounded essentially comes down to gravity. The gravitational pull of an object will always be directed toward its mass centre. The more massive and gravitational attraction something has, the bigger it is.

The strength of the object itself opposes such force for solid objects. For instance, you are not drawn into the centre of the Earth by the downward force of gravity. The reason for this is that the ground is pushing back up at you; it is too strong to allow you to sink through it. The power of Earth has its limits, though. Imagine a massive mountain, like Mount Everest, becoming bigger and bigger as the planet's plates collide. Everest starts to sink as it gets taller due to its weight increasing. The mountain's height will be constrained as a result of the additional weight forcing it deeper into the Earth's mantle.

Hence, planets moves in fixed orbits.

To know more about planets.

https://brainly.com/question/14581221

#SPJ4

The Effective Spring Constant is [tex](\frac{k1k2}{k1 + k2} )[/tex] for a system of 2 springs with spring constant k1 and k2.

The term "spring constant" refers to the proportional constant k. It gauges the stiffness of the spring. A spring exerts a force F = -kx in the direction of its equilibrium position when it is stretched or compressed to a length that differs by an amount x from its equilibrium length.

Spring constants are available in plural (physics) a quality of a spring that is determined by the force acting on the spring to the displacement it produces.

K stands for the proportionality constant, commonly referred to as the "spring constant." In layman's words, stiffness and strength are shown by the k variable in Hooke's law (F = -kx). An item requires more force to be stretched to a specific length the greater the value of k.

Let the force actiong be F N

then , if k1 is the spring constant of spring 1

F = x1 * k1

or, x1 = F/k1.

Similarly for spring 2

x2 = F/k2

Now x1 + x2 = F (1/k1 + 1/k2)

or effective displacement

X= [tex]F(\frac{1}{k1} + \frac{1}{k2} )[/tex]

or, F = [tex]X * (\frac{k1k2}{k1 + k2} )[/tex]

So the Effective Spring Constant is [tex](\frac{k1k2}{k1 + k2} )[/tex].

To learn more about spring refer to :

https://brainly.com/question/14973217

#SPJ4

When a soap bubble 100 nm thick and illuminated by white light incident perpendicular to its surface, then wavelength, λ is calculated =  5.32 *10^-7 m.

The ratio of the speed of light in a vacuum, c, to the speed of light in a medium, c' is called as index of refraction. One of the consequence of this difference in speed is that when light goes from one medium to another at an angle, then the propagation vector in the new medium has a different angle with respect to normal.

Given, t= 100nm= 100 * 10 ^-9  n= 1.33

ΔФ1 = λ/4

ΔФ2 = 2√2 t λ n/2 λ

=2 t n

=2 * 100 * 10 ^-9 * 1.33

= 2.66 *10^-7

2.66 *10^-7= λ/2

λ=  5.32 *10^-7 m.

To know more about index of refraction, refer

https://brainly.com/question/12469161

#SPJ4

When it happens mother should have to do cool the burn with tap water for 10 to 20 minutes immediately.

Stop the burning process. Cool the burn. Supply pain relief.

Before the arrival of qualified emergency help, you should:

Pain and skin injury from wet heat or vapors can result from hot water scalding. Because the damaged tissues and cells are destroyed, this kind of burn can be deadly. The heat could even cause your body to go into shock. These burns can be fatal in more severe circumstances.

Cool the burn.

Place the affected area under cool (not cold) flowing water for about 10 minutes. Until the pain goes away, apply a cool, wet cloth to the burned area of the face. If you have a mouth burn from hot food or drink, place a piece of ice in your mouth for a while.

To know more about burn click:

https://brainly.com/question/18526186

#SPJ4

According to the given statement 11303.5 kg  is the weight of the truck.

The buoyant force, which applies to a person at rest in a fluid, is proportional to the weight of the displaced water and pushes higher. The amount of fluid displaced when the body is fully immersed is equal to the body's volume.

The Archimedean principle, which asserts that the hydrostatic push is equal to the weight of the desalinated liquid, is used to solve this task.

B = ρ g V

It is in balance with the push when the truck is at full weight, according to Newton's law of equilibrium.

          Σ F = 0

          B-W = 0

          B = W

body weight

          W = M g

the volume is

          V = l to h

          (l to h) = M g

          M = l a h

we calculate

          M = F = 1000 . 10. (4.70 x 6.50 x 0.037)  = 11303.5 N

          M = 11303.5 kg

To know more about Archimedean visit:

https://brainly.com/question/1603482

#SPJ4

Newton's third law states that any action will have a(n) equal and opposite reaction.

The first minimum of an a- wideslit is produced by 410-nm ultraviolet light at an angle of 11.8, and by 700-nm red light at an angle of 20.5.

The lens and cornea are impervious to light with UV wavelengths less than 360 nm. As a result, violet light, which ranges in wavelength from 360 nanometers to 400 nanometers, is the best light for controlling myopia from both an efficacy and safety perspective.

d

sin

θ

=

n

λ

2

(

sin

θ

)

=

(

1

)

(

410

×

10

−

9

)

sin

θ

=

410

×

10

−

9

2

=

2.05

×

10

−

7

θ

=

sin

−

1

(

2.05

×

10

−

7

)

=

1.17

×

10

−

5

Thus the angle is

1.17

×

10

−

5

.

(b.)

Given data

The width of slit is

d

=

2.00

m

.

The number of minimum is

n

=

1.

The wavelength is, \lambda =700 nm

The wavelength of violet light, which ranges from 380 to 450 nanometers, is at the higher end of the visible spectrum (in experiments, people have so far seen to 310 nm). In contrast to X-rays and gamma rays, ultraviolet light has a wavelength that is shorter than violet but greater than both of them. In general, light violet is used to compose violet items.

To know more about violet light visit:

https://brainly.com/question/13335771

#SPJ4

A BTU is defined as the amount of energy required to raise the temperature of one lb of water by one-degree celsius is False.

A British thermal unit is a measure of the amount of heat in a fuel or energy source. This is the amount of heat required to raise the temperature of 1 pound of liquid water by 1 degree Fahrenheit, the temperature at which water reaches its maximum density.

BTU is the amount of energy required to raise the temperature of 1 pound of water to 1 degree Fahrenheit above sea level. Technically, this measurement refers to the amount of energy required for this process when water is at its maximum density.

Learn more about The temperature here:- https://brainly.com/question/24746268

#SPJ4

The wavelength of visible light compare to radio waves in the sense that visible light waves have a shorter wavelength than radio waves.

The wavelength is described as the spatial period of a periodic wave which is the distance over which the wave's shape repeats.

Radio waves are electromagnetic waves that are produced by man with an oscillating circuit.

Radio waves are used in broadcasting, the waves used in television are those of shorter wavelength and those of radio are those of longer wavelength.

Longer radions are reflected in the ionosphere and can be detected in antennas which is located at great distances from the emitting source. The medium waves are less reflected in the ionosphere, due to their large wavelength they can overcome obstacles, so they can travel great distances.

It is known that the visible radiation waves have a wavelength between approximately 400 and 700 nanometers, the radio waves range from 1 centimeter to 1 km, so they have longer wavelengths than the waves belonging to the visible spectrum.

Learn more about wavelength at: https://brainly.com/question/10728818

#SPJ1

The distance over which the force acts on the box, given that 70 N is applied to the 10 Kg box is 3.125 m

We'll begin by obtaining the acceleration of the box. Details below:

Net force = mass × acceleration

40 = 10 × acceleration

Divide both sides by 10

Acceleration = 40 / 10

Acceleration = 4 m/s²

Finally, we shall determine the distance. Details below

v² = u² + 2as

5² = 0² + (2 × 4 × s)

25 = 0 + 8s

25 = 8s

Divide both side by 8

s = 25 / 8

s = 3.125 m

Thus, we can conclude that the distance covered is 3.125 m

Learn more about distance travelled:

https://brainly.com/question/18265275

#SPJ1

The force that must be exerted on the master cylinder of the hydraulic lift to support the weight of car is  147.2 N .

The Pascal's Law states that the relation between the pressure , force and area is given as :

Pressure = Force/Area ;

given that the diameter of the master cylinder is = 1.93 cm ;

so radius of master cylinder = 1.93/2 = 0.965 cm = 0.00965 m ;

the diameter of slave cylinder is = 24.9 cm ;

the radius of the slave cylinder = 24.9/2 = 12.45 m = 0.1245 m ;

Area of slave cylinder (A₁)= π(0.1245)² = 0.0486 m²

Area of the master cylinder (A₂) =  π(0.00965)² = 0.000292 m² ;

given mass of the car = 2500 Kg ,

the force exerted will be : F = m*a

F₁ = 2500*9.8 = 24500 N ;

F₁/A₁ = F₂/A₂

So , 24500/0.0486 = F₂/0.000292

F₂ = (24500/0.0486)×0.000292

F₂ = 147.2 N

Therefore , the force exerted on the master cylinder is 147.2 N  .

Learn more about Force here

https://brainly.com/question/14114564

#SPJ4

An average tendon can withstand 16000 per square inch of force (psi). The Achilles tendon may begin to fail at a force of F = 1280 pounds.

That meaning of the term "force" is obvious. At this point, it is quite acceptable to refer to a force as a push or possibly a pull. An item does not "have energy in it" or "encompass energy." A force is applied to one thing by another. A factor is anything that affects non-living things as well.

Inertia is what holds the cosmos together. Literally. That could prevent matter from having the electric forces necessary to produce its system layout. Vibrating particles generate heat and rotational motion, which operate to counteract inertia.

Area of tendon 0.4×0.2

=0.08 square inch.

0.08 square inch tendon =16000×0.08

F =1280 pound.

To know more about force visit:

https://brainly.com/question/14853868

#SPJ1

5.16883548 m is the wavelength, if E.M radiation has a frequency of 58,000,000 Hz.

Given data :

Formula:

        λ = C/f

Where,

λ (Lambda) = Wavelength in meters

c = Speed of Light (299,792,458 m/s)

f = Frequency

λ  = 58,000,000 / 299,792,458 = 5.16883548

Learn more about frequency and wavelength refer to :

https://brainly.com/question/6297363

#SPJ1

Since linear momentum equals m v, it varies at each bounce by the same amount, r = R. For instance, if a ball bounces eighty percent of its height each time, it loses twenty percent of its energy each time.

An object's heat uptake or loss and the consequent temperature variations are related by the description above and the following equation (Q = m•C•T).

We now know that heat can occasionally be acquired or lost without a corresponding change in temperature. When the material is changing states, this is what happens.

The mass and speed of an item moving determine how much kinetic energy it has.

learn more about linear momentum refer

https://brainly.com/question/7538238

#SPJ4

Recommend frequent hand washing are the treatment method developed after the discovery of germ theory.

Learn more about steps of proper handwashing refer to :

https://brainly.com/question/29628173

#SPJ1