Answer:
AB = CB
As AB Corresponds to CB in the given triangles
What happen to the surface area of exposed rock if a rock is fractured?
A) there are more pieces, but the surface area does not change
B) The surface area does not change because the volume does not change
C) The surface area increases as the rock is fractured
D) The surface area decreases as the rock is fractured
E) both a and b
The surface area increases as the rock is fractured. Therefore the correct option is option C.
Rock fracture is the mechanical breakdown of rock due to stress. The stress can be tectonic or man-made, such as blasting. When rock fractures, it breaks into smaller pieces, which are known as rock fragments or rock blocks. Rock fracture has a significant impact on the surface area of rock.
When rock is fractured, the surface area of the rock increases. This is because a single rock breaks into smaller fragments, each with its own surface area.
Therefore, the correct answer to the given question is: The surface area increases as the rock is fractured.
For such more question on fractured:
https://brainly.com/question/27854952
#SPJ11
1 ptWhile it is impossible to predict an earthquake, they typically occur neartectonic plate boundariesfault linesboth a and b
Answer:
Earthquakes typically occur near tectonic plate boundaries, which are regions where two or more tectonic plates meet. As the plates move and interact with each other, they can create stress and strain on the surrounding rocks, which can eventually lead to an earthquake. Therefore, the statement "earthquakes typically occur near tectonic plate boundaries" is correct. The term "fault lines" refers to the fractures or breaks in the earth's crust along which movement can occur during an earthquake. Fault lines often coincide with tectonic plate boundaries, but not all tectonic plate boundaries have visible fault lines. So, statement "a" is also correct, but statement "b" is not always true.
Explanation:
which of the following are true of eastern boundary currents? choose all that apply. view available hint(s)for part d which of the following are true of eastern boundary currents?choose all that apply. deep, as compared to western boundary currents wide, as compared to western boundary currents they flow along the more gradual slope of the hill of water fast, as compared to western boundary currents weak, as compared to western boundary currents
.True statements about Eastern boundary currents: Eastern boundary currents refer to the currents on the eastern side of ocean basins that flow toward the equator from the poles.
The eastern boundary currents are characterized by being wide, weak, and flowing along the more gradual slope of the hill of water.True statements about Eastern boundary currents: Eastern boundary currents refer to the currents on the eastern side of ocean basins that flow toward the equator from the poles.
These currents, which are relatively shallow, are generally broader and weaker than western boundary currents.They are referred to as boundary currents because they represent the boundary between the subtropical and subpolar gyres.
Western boundary currents are known for their speed and depth, and the cold waters of the western boundary currents have a significant impact on global weather patterns. Eastern boundary currents, on the other hand, tend to be wider and weaker than their western counterparts.
Eastern boundary currents tend to flow along the more gradual slope of the hill of water, whereas western boundary currents tend to flow along the steeper slope of the hill of water. They are often accompanied by upwelling, which brings deep, nutrient-rich water to the surface, making them ideal fishing grounds.
Eastern boundary currents are characterized by being wide, weak, and flowing along the more gradual slope of the hill of water.
To know more about currents refer here:https://brainly.com/question/3110787#
#SPJ11
the distinctive vertical joints seen in this basalt flow most likely formed as a consequence of which of the following?
The distinctive vertical joints seen in this basalt flow most likely formed as a consequence of thermal contraction. Thermal contraction occurs when hot molten rock cools and contracts upon cooling. As the rock cools, fractures form which create the vertical joints seen in the basalt flow.
Thermal contraction is common in basalt flows and can result in a variety of joint types, depending on the rate of cooling. As the molten rock cools, it contracts and fractures, resulting in a network of vertical and horizontal fractures, which can range in size from millimeters to centimeters. As the rock cools further, these fractures can become more pronounced, resulting in distinct vertical columns of rock.
The rate of cooling of the molten rock is a major factor in determining the size and pattern of the vertical joints in the basalt flow. If the molten rock cools quickly, it contracts more rapidly and thus more fractures form, creating a more pronounced pattern of vertical joints.
Conversely, if the molten rock cools slowly, the contraction is slower and less fractures form, resulting in a less pronounced pattern of vertical joints.
The cooling of the molten rock is also affected by the type of environment it is exposed to. Basalt flows in a temperate environment will cool at a slower rate than those exposed to a colder environment, thus producing a different pattern of vertical joints.
In conclusion, the distinctive vertical joints seen in this basalt flow most likely formed as a consequence of thermal contraction. The size and pattern of the joints is affected by the rate of cooling of the molten rock, as well as the type of environment it is exposed to.
To know more about distinctive vertical joints here
https://brainly.com/question/29849201
#SPJ11
(Please help, the sooner this is answered the better. Thank you!)
[This is for astronomy but I don't see an astronomy option]
Why is the planet Uranus virtually invisible to the unaided eye?
1. it is very far away from Earth
2. it is obscured by a constant haze
3. its halo bends light around it
4. it does not reflect light
Answer:
It is obscured by a constant haze. ( This may not be correct )
Planet Uranus is virtually invisible to the unaided eye because it is obscured by a constant haze. Hence, option B is appropriate.
What is the meaning of Uranus?The seventh planet from the Sun is Uranus. It bears the name of the Greek sky god Uranus, who is also known as Cronus' father, Zeus' grandpa, and Ares' great-grandfather in Greek mythology. In the Solar System, Uranus has the fourth-largest planetary mass and the third-largest planetary radius.
With a tilt of 97.77 degrees and the only planet whose equator is almost at a straight angle to its orbit, Uranus may have collided with an Earth-sized object long ago. The most intense seasons in the solar system are brought on by this peculiar tilt.
Four times as wide as Earth, Uranus. Uranus' size would be equivalent to a basketball if Earth were a huge apple.
Hence, option B is correct.
Learn more about Uranus here:
https://brainly.com/question/9048375
#SPJ2
16. At which latitude and longitude in New York State would a salt mine in Silurian-age bedrock most likely be located? (1) 41°N 72°W (3) 44°N 74°W (2) 43°N 77°W (4) 44°N 76°W 16
The latitude and longitude in New York State that a salt mine in Silurian-age bedrock would be most likely be located would be (4) 44°N 76°W.
How are rock layers formed?Rock layers, also known as strata, are formed by a variety of natural processes. One of the ways is by the settling of sedimentary materials such as sand, mud, and other forms of debris. When these materials accumulate over time, they form layers of rocks. The bottom layer is the oldest while the top layer is the most recent.
In order for a salt mine to be formed, the salt needs to be dissolved in water and carried to a place where it will evaporate. Salt mining is common in areas where ancient salt deposits have been preserved. Salt deposits are often located in evaporite basins. In general, salt deposits are usually found in low-lying areas where water has accumulated and then evaporated, leaving behind large deposits of salt. The correct answer is (4) 44°N 76°W.
Learn more about salt mine here: https://brainly.com/question/29307899
#SPJ11
Nuclear reactions in main sequence stars take place ___________________________, where the gas is hot and dense.
Nuclear reactions in main sequence stars take place in their cores, where the gas is hot and dense.
What is a nuclear reaction?A nuclear reaction is a process in which atomic nuclei are modified, which changes the chemical properties of an atom. A nuclear reaction can result in the release or absorption of energy. The transmutation of nuclei, the creation of nuclei, or the splitting of nuclei are all examples of nuclear reactions. Nuclear reactions can be brought about by a variety of means, including natural radioactive decay, nuclear fission, and nuclear fusion.Nuclear reactions in main sequence stars take place in their cores, where the gas is hot and dense. In their core, high temperatures and pressures produce nuclear fusion. The process of nuclear fusion involves the conversion of hydrogen into helium, which releases a large amount of energy. This energy is responsible for the star's radiance and heat.
Learn more about nuclear reaction here: https://brainly.com/question/1420545
#SPJ11
Identify at least three ways the mountain people of Nepal earn a living
The mountain people of Nepal, who live in remote areas with difficult terrain, have developed a variety of economic activities to sustain themselves and their families. Here are three ways they earn a living: agriculture, tourism, and trade
Agriculture: Farming is the primary occupation of mountain people in Nepal. They cultivate crops like rice, maize, millet, potatoes, and vegetables, using traditional farming practices such as terracing to maximize land use. They also raise livestock such as cows, goats, sheep, and yaks for meat, milk, and wool.
Tourism: Many mountain people in Nepal live near popular trekking routes, and they earn a living by providing services to tourists such as guides, porters, and homestay accommodations. They also sell handicrafts like traditional textiles, pottery, and jewelry to tourists.
Trade: Mountain people in Nepal often engage in trade with nearby villages or towns. They may collect and sell forest products such as herbs, honey, and timber, or trade goods like salt, tea, and clothing. Some mountain people also work as laborers in construction or transportation, building roads and bridges or carrying goods by pack animal or on foot.
To learn more about mountain people
https://brainly.com/question/29813178
#SPJ4
What are the boundaries between tectonic plates that are colliding?
Answer:
Convergent plate boundary
Explanation:
If two tectonic plates collide, they form a convergent plate boundary. Usually, one of the covering plates will move beneath the other, a process known as subduction. Deep trenches are features often formed where tectonic plates are being subducted and earthquakes are common at subduction zones as well.
Match the following geologic settings to the form of metamorphism which occurs at that location. A burial Mid-ocean ridge Bdynamic Mountain range core Ten miles below the surface Cdynamo- thermal Fault zone D hydrothermal Intrusion of a pluton Eshock Meteorite impact site Fthermal
A burial Mid-ocean ridge Bdynamic Mountain range core Ten miles below the floor Cdynamo- thermal Fault quarter D hydrothermal Intrusion of a pluton Eshock Meteorite impact site Fthermal.
Where does most metamorphism take place?Most metamorphic tactics take place deep underground, inside the earth's crust. During metamorphism, protolith chemistry is mildly modified with the aid of expanded temperature (heat), a kind of pressure referred to as confining pressure, and/or chemically reactive fluids.
What type of metamorphism would show up at a plate boundary the place two continents are colliding?Image end result for Match the following geologic settings to the shape of metamorphism which occurs at that location.
Regional metamorphism refers to large-scale metamorphism, such as what occurs to continental crust along convergent tectonic margins (where plates collide). The collisions result in the formation of long mountain ranges, like those alongside the western coast of North America.
Learn more about Fthermal here;
https://brainly.com/question/934320
#SPJ1
the difference between renewable and nonrenewable resources is that nonrenewable resources require
Answer:
Explanation:
The difference between renewable and nonrenewable resources is that nonrenewable resources require millions of years to form and are being depleted at a faster rate than they are being replenished, while renewable resources are replenished naturally and can be sustained over time. Nonrenewable resources include fossil fuels such as coal, oil, and natural gas, as well as minerals and metals that are mined from the earth. These resources are finite and once they are depleted, they cannot be replaced. In contrast, renewable resources include solar, wind, hydro, geothermal, and biomass energy, as well as resources such as timber, water, and crops that can be regrown or replenished naturally. These resources are replenished over time and can be sustained for future generations. The use of renewable resources is seen as a more sustainable and environmentally friendly approach to resource management, as they have a lower impact on the environment and can be used indefinitely without running out.
which sentence follows ap style on place names? group of answer choices one of the smallest state capitals is carson city, nev. with about 55,000 residents. one of the smallest state capitals is carson city, nevada with about 55,000 residents. one of the smallest state capitals is carson city, nv with about 55,000 residents. one of the smallest state capitals is carson city, nevada, with about 55,000 residents. one of the smallest state capitals is carson city, nv, with about 55,000 residents. one of the smallest state capitals is carson city, nev., with about 55,000 residents.
According to AP Style, when referring to a place name, the state should be spelled out, and abbreviations should only be used when necessary for space constraints.
In this case, the sentence should read: one of the smallest state capitals is Carson City, Nevada, with about 55,000 residents. This follows AP Style since the state is spelled out, and the abbreviation is not used unless absolutely necessary.
AP Style states that abbreviations should only be used when necessary for space constraints to avoid confusion or misunderstanding. Therefore, in this sentence, the full name of the state should be used.
Know more about AP Style here
https://brainly.com/question/30396496#
#SPJ11
Please someone explain how to do this
Answer:
i just need pnts
explanation:
im sorry
changes in agriculture may have contributed to global changes in temperature.
Yes, changes in agriculture have contributed to global changes in temperature.
What is agriculture?Agriculture is the practice of cultivating crops and raising animals for human use and consumption. It involves various activities such as preparing the soil, planting seeds, watering, fertilizing, pest management, and harvesting. Agriculture plays a crucial role in providing food, fiber, and fuel for the world's population. It has been practiced for thousands of years and has undergone significant changes over time, including the use of advanced technologies and scientific methods. Agriculture is essential for economic development and sustainability, and it has the potential to contribute to poverty reduction and food security. However, it also faces challenges such as climate change, land degradation, and water scarcity, which require innovative solutions and sustainable practices to ensure its continued success.
To learn more about agriculture, visit:
https://brainly.com/question/21649449
#SPJ1
The following statements compare and contrast cryovolcanism with regular volcanism. Which are true?
Choose one or more:
A. Cryovolcanism always ejects water ice crystals while regular volcanism always ejects rock.
B. Cryovolcanism operates at a higher temperature.
C. Both eject material from the interior of a planetary body.
D. Only regular volcanism has ever been observed. Cryovolcanism refers to ancient volcanism.
E. Both can be used to help determine the age of the surface of a body.
F. Regular volcanism is driven by a molten rock interior, while cryovolcanism is driven by a cold liquid interior.
The true statements are:
C. Both eject material from the interior of a planetary body.
E. Both can be used to help determine the age of the surface of a body.
F. Regular volcanism is driven by a molten rock interior, while Cryovolcanism is driven by a cold liquid interior.
The correct answer is C, E and F.
Statement A is false because Cryovolcanism can eject various materials, including water ice, ammonia, and methane, while regular volcanism usually ejects molten rock, ash, and gas, statement B is false as Cryovolcanism operates at much lower temperatures than regular volcanism, and the statement D is also false as Cryovolcanism has been observed on several icy bodies in the Solar System, including Enceladus and Europa.
Cryovolcanism and regular volcanism are two types of volcanic activity that occur on planetary bodies in our Solar System. While a molten rock interior drives regular volcanism, Cryovolcanism is driven by a cold liquid interior, usually water or another volatile substance.
To know more about volcanism, visit:
https://brainly.com/question/11945125
#SPJ4
1) Which is the least developed region among the following? A) North America B) Eastern Europe C) Southwest Asia D) Western and Central Europe E) East Asia.
Southwest Asia, also known as the Middle East, is considered the least developed region because it has been plagued by political instability, conflicts, and wars for several decades, severely impacting its economic growth and development.
The correct option is C.
Many countries in the region heavily rely on oil and gas exports, making them vulnerable to global oil price fluctuations. And the region has a high poverty rate, particularly in countries like Yemen, Syria, and Iraq, which have been severely impacted by conflict and displacement.
The region faces significant environmental challenges, including water scarcity, desertification, and air pollution. The region's arid climate and overuse of water resources have led to water scarcity in many areas, negatively impacting agriculture and human health.
To know more about Southwest Asia, visit:
https://brainly.com/question/9697255
#SPJ4
what happens on either side of the equilibrium line in a glacier?
Answer:
Above the equilibrium line, the glacier is in the accumulation zone where there is a net gain of ice mass. On the other hand, below the equilibrium line, the glacier is in the ablation zone where there is a net loss of ice mass due to melting and calving. As the glacier moves, it erodes the land around it in two ways: by plucking and abrasion. Plucking occurs when rocks get frozen to the base, sides, and back wall of the glacier, and the movement of the glacier pulls these frozen rocks away. Abrasion occurs when rocks trapped in the glacier rub against the valley floor, wearing it away like sandpaper.
Explanation:
The glacier equilibrium line is the point of transition between the accumulation zone and the ablation zone. Above the equilibrium line, the rate of snowfall is greater than the rate of melting, so not all of the snow that falls each winter melts during the following summer, and the ice surface is always covered with snow. Therefore, the part of a glacier above the equilibrium line is where there is a net gain of ice mass. As snow gradually accumulates above the equilibrium line, it is compressed and turned into firn within which t,he snowflakes lose their delicate shapes and become granules. With more compression, the granules are pushed together and air is squeezed out. Eventually, the granules are “welded” together to create glacial ice .
Below the equilibrium line, the rate of melting is greater than the rate of snowfall, so there is a net loss of ice mass due to melting and calving. Therefore, the part of a glacier below the equilibrium line is where there is a net loss of ice mass . The position of the equilibrium line changes from year to year as a function of the balance between snow accumulation in the winter and snowmelt during the summer. More winter snow and less summer melting obviously favors the advance of the equilibrium line (and of the glacier’s leading edge), but of these two variables, it is the summer melt that matters most to a glacier’s budget .
The terminus of a glacier advances or retreats based on the location of the equilibrium line. If the rate of forward motion of the glacier is faster than the rate of ablation (melting), the leading edge of the glacier advances (moves forward). If the rate of forward motion is about the same as the rate of ablation, the leading edge remains stationary, and if the rate of forward motion is slower than the rate of ablation, the leading edge retreats (moves backward) .
based on this week's material match the following as best you can. group of answer choices crossed arms [ choose ] phoneme [ choose ] ebonics [ choose ] indo-european languages\
Crossed arms typically refer to the body language where an individual crosses their arms over their chest. It is often interpreted as a defensive or closed-off posture. However, it can also indicate that the person is comfortable or relaxed.
What is Phoneme?A phoneme is a unit of sound that distinguishes one word from another in a particular language. For example, the words "cat" and "bat" differ by only one phoneme, the initial sound /k/ versus /b/. Phonemes are the smallest units of sound in a language and can be combined to form words.
Ebonics, also known as African American Vernacular English (AAVE), is a dialect of English that is spoken by some African Americans. It includes unique grammatical structures, vocabulary, and pronunciation that differ from Standard English. It has been the subject of much debate and controversy, particularly in the education system, where some argue that it should be recognized as a distinct language and taught as such.
Indo-European languages are a family of languages that includes the majority of European languages, as well as many languages spoken in Asia. This language family is believed to have originated in the Pontic-Caspian steppe region around 4500 BCE and spread through migration and conquest. Some of the most widely spoken Indo-European languages include English, Spanish, French, German, Hindi, Bengali, and Russian.
Learn more about languages on;
https://brainly.com/question/10585737
#SPJ1
which type of aggregates (igneous, sedimentary, or metamorphic) would you expect to be most suitable as a base-course material?
For a base-course material, the type of aggregate that would be the most suitable is sedimentary aggregate. This is due to its structure, which makes it stable, durable, affordable and easy to compact.
When it comes to aggregate materials, there are three main types: igneous, sedimentary, and metamorphic.
Igneous aggregates are formed from volcanic material that has been solidified. These materials are hard and durable, making them ideal for high-strength concrete and asphalt. They are also useful in railroad ballasts, building materials, and as fill for large voids in construction projects.
Sedimentary aggregates are formed from the erosion of pre-existing rock layers. This type of aggregate is the most commonly used in construction. It's known for its durability, low cost, and easy availability. Sedimentary aggregates include materials like gravel, sand, and limestone.
Metamorphic aggregates are formed by the transformation of pre-existing rocks through heat and pressure. They are the hardest and most durable. Marble, slate, and quartzite are examples of metamorphic aggregates. They are mostly used in high-strength concrete, railroad ballasts, and as fill for large voids in construction projects.
learn more about Igneous, Sedimentary and Metamorphic:
https://brainly.com/question/29512093
#SPJ11
Of the following solutions, which has the greatest buffering capacity? Explain. A) They would all have the same buffer capacity. B) 0.821 M HF and 0.217 M NaF C) 0.100 M HF and 0.217 M NaF D) 0.821 M HF and 0.909 M NaF E) 0.121 M HF and 0.667 M NaF
We know the formula β = (d[A-] / dpH) / [HA] by using this formula we can say that option B has the highest buffer.
A) 0.821 M HF and 0.217 M NaF
pH = pKa + log([A-]/[HA])
pH = 3.17 + log(0.217/0.821) = 2.54
β = 0.0025
B) 0.821 M HF and 0.909 M NaF
pH = 3.17 + log(0.909/0.821) = 3.27
β = 0.0036
C) 0.100 M HF and 0.217 M NaF
pH = 3.17 + log(0.217/0.100) = 3.67
β = 0.0022
D) 0.121 M HF and 0.667 M NaF
pH = 3.17 + log(0.667/0.121) = 4.15
β = 0.0022
thus, we can see that option B has the highest buffer capacity coefficient and also would have the highest buffering capacity.
To learn about buffer capacity visit:
https://brainly.com/question/26987857?referrer=searchResults
#SPJ4
Absence of the sky condition and visibility on an ATIS broadcast indicates that . . .
The absence of the sky condition and visibility on an ATIS broadcast indicates that the information is not available or the conditions are below a certain threshold.
ATIS stands for Automatic Terminal Information Service, which is an automatic broadcast system that provides pilots with updated information on specific airports' meteorological and operational circumstances.
When approaching or departing an airport, pilots may use this system to collect up-to-date weather and safety data. Pilots are advised to use this technology to enhance safety and reduce the likelihood of accidents, as well as to provide real-time updates to ground crews in order to coordinate landing and takeoff procedures.
The absence of sky condition and visibility on an ATIS broadcast indicates that either the information is not available or the conditions are below a certain threshold, according to FAA regulations.
Thus, the absence of the sky condition and visibility on an ATIS broadcast indicates that the information is not available or the conditions are below a certain threshold.
For such more question on threshold:
https://brainly.com/question/27228680
#SPJ11
which methods could you use to calculate the x-coordinate of the midpoints of a horizontal line segment with endpoints at (0,0) and (20,0)?
By dividing 20 by 0 we can calculate the x-coordinate of the midpoints of a horizontal line segment with endpoints at (0,0) and (20,0).
I'll omit the "y" values from another midpoint calculation as we're only working with x coordinates right now. Although I could build the midway formula, it is much simpler to understand what it means.
The centre, which would be the average of the alignment, should always be known whenever a line's midway is determined. The same average is determined by adding the two integers and then dividing the result by two.
Learn more about line segment here:
https://brainly.com/question/30072605
#SPJ1
describe eac the 4 major types of irrigation.a.rank them from least amount of evaporative/runoff loss to most.
There are four major types of irrigation: surface irrigation, sprinkler irrigation, drip irrigation, and subsurface irrigation.
Surface Irrigation involves flooding fields with water and is the most common type of irrigation. It is less expensive than other methods, but is also the least efficient, with higher rates of water loss due to evaporation and runoff.
Sprinkler Irrigation uses a system of pipes and nozzles to spray water onto crops, allowing for more even water distribution and fewer losses due to runoff. This is the most efficient method, with the least water loss due to evaporation or runoff.
Drip Irrigation uses tubes with emitters and nozzles to slowly drip water directly to plant roots, and is the most efficient method of all with the least amount of water loss due to evaporation or runoff.
Subsurface Irrigation is similar to drip irrigation, but the water is injected directly into the soil below the crop roots, which reduces the amount of water loss due to evaporation or runoff.
From least amount of evaporative/runoff loss to most, the types of irrigation are: Drip Irrigation, Subsurface Irrigation, Sprinkler Irrigation, and Surface Irrigation.
To know more Types of irrigation here
https://brainly.com/question/16179426
#SPJ11
Repurposing old quarries or damming fields with piles of soil are inexpensive ways of creating_________ that reduce flooding from surface runoff but do not alter stream flow.
Answer:
c
Explanation:
What river forms part of the French Germany border?
How is a person's unknown location determined using the location of 3 known points? A. By calculating the ephemeris B. By determining the pseudorange C. By implementing 3D equilateration D. By using the 2D trilateration process
Using the location of 3 known points the unknown location of a person is determined by applying a 3D equilibration. Here option C is the correct answer.
The process of determining a person's unknown location using the location of three known points is known as trilateration. Trilateration is a mathematical process that involves measuring the distance between the unknown point and each of the known points and then using these measurements to calculate the unknown point's location.
Trilateration can be performed in both two-dimensional (2D) and three-dimensional (3D) space. In 2D trilateration, the known points and the unknown point all lie on a flat surface, such as a map, while in 3D trilateration, the points are located in three-dimensional space.
To perform trilateration, the distance between the unknown point and each of the known points must be accurately measured. This can be done using techniques such as GPS (Global Positioning System), where the distance is determined by measuring the pseudo-range between the unknown point and each known point. Once the distances have been determined, the unknown point's location can be calculated using 3D equilibration, which involves solving a system of equations that relates the distances between the points to their respective coordinates.
To learn more about trilateration
https://brainly.com/question/29352977
#SPJ4
true or false lithofication is the process in which two plates move towards each other and the denser one slides below the other.
The statement "lithification is the process in which two plates move towards each other and the denser one slides below the other" is False because lithification refers to the process in which sediment is compacted and cemented together to form sedimentary rock.
What is lithification?Lithification is the process by which sedimentary rocks are formed. It is a transformation process that involves the compaction and cementation of sediment to produce solid rock from loose sediment. The process of lithification results in the creation of sedimentary rocks from sediments such as clay, silt, sand, and gravel.
How does lithification occur?Lithification occurs in three stages:
Compaction of Sediments - This occurs when the weight of overlying sediment squeezes the water out of the sediments beneath it. As a result, the sediment becomes denser, and the grains are packed closer together.
Cementation of Sediments - Cementation occurs when mineral crystals are deposited in the small spaces between the sediment grains, gluing them together to create solid rock.
Sedimentary Rocks - Sedimentary rocks are formed when the compacted and cemented sediment becomes hard and forms rock.
Thus, the statement, "Lithification is the process in which two plates move towards each other and the denser one slides below the other," is false.
Learn more about Lithification here: https://brainly.com/question/1446935
#SPJ11
considering how magma composition, temperature, water content, and volatile content affect its viscosity, associate each of the volcanoes described in this activity with the type of eruption it should produce, or indicate whether the described characteristic is not related to eruption style. drag the appropriate items into their respective bins.
To answer this question, first we need to understand the factors that affect a volcano's eruption type. These factors are magma composition, temperature, water content, and volatile content. Based on these factors, we can associate each volcano with the type of eruption it should produce or indicate whether the described characteristic is not related to eruption style.
Volcano Magma Composition Temperature Water Content Volatile Content Eruption Type
A Felsic High Low High Explosive
B Intermediate High Moderate Moderate Explosive
C Mafic Low High Low Effusive
D Felsic High High High Explosive
As seen in the table above, we can associate each volcano with the type of eruption it should produce or indicate whether the described characteristic is not related to eruption style.
Volcano A has felsic magma composition, high temperature, low water content, and high volatile content. This combination of factors indicates that Volcano A should produce an explosive eruption.
Volcano B has intermediate magma composition, high temperature, moderate water content, and moderate volatile content. This combination of factors indicates that Volcano B should also produce an explosive eruption.
Volcano C has mafic magma composition, low temperature, high water content, and low volatile content. This combination of factors indicates that Volcano C should produce an effusive eruption.
Volcano D has felsic magma composition, high temperature, high water content, and high volatile content. This combination of factors indicates that Volcano D should also produce an explosive eruption.
Therefore, we can say that magma composition, temperature, water content, and volatile content are all important factors that determine a volcano's eruption type.
To know more about volcano eruption refer here:https://brainly.com/question/13467703#
#SPJ11
The type of rocks that are formed by changing previously existing rocks through increases in temperature, increases in pressure, deformation, or chemical reaction is rocks.
The type of rocks that are formed by changing previously existing rocks through increases in temperature, increases in pressure, deformation, or chemical reaction is metamorphic rocks.
Metamorphic rocks are formed from previously existing rocks by changes due to temperature, pressure, deformation, and chemical reactions.
These types of rocks are made up of minerals that have been changed into other minerals or into different forms of the same minerals by heat, pressure, or chemical reactions that occur deep in the Earth's crust and mantle.
It occurs due to geological processes such as tectonic movements, compression, heating, and metamorphism. These rocks can be classified into two types: foliated and non-foliated.
Some examples of metamorphic rocks are marble, gneiss, schist, and slate.
For such more question on metamorphic rocks:
https://brainly.com/question/12740674
#SPJ11
which national park is home to a large volcanic caldera?Yellowstone National ParkAniakchak Caldera in Aniakchak National Monumenlake toba
Yellowstone National Park is home to a large volcanic caldera because it is situated on top of a "hot spot" in the Earth's mantle, where a column of molten rock rises from its interior towards the surface.
The correct answer is Yellowstone National Park.
This hot spot has been active for millions of years, causing volcanic activity that has led to the caldera's formation. The most recent major eruption occurred approximately 640,000 years ago, creating the current caldera, and numerous more minor eruptions have occurred since then.
Yellowstone National Park, located primarily in the US state of Wyoming, was established in 1872 and is considered the first national park in the world. The park is known for its geothermal features, such as geysers, hot springs, and mud pots, caused by volcanic activity underneath the surface.
To know more about Yellowstone National Park, visit:
https://brainly.com/question/4031039
#SPJ4
