Answer:
10.5 L of O₂.
Explanation:
We'll begin by calculating the number of mole in 90 g of C₂H₆. This can be obtained as follow:
Molar mass of C₂H₆ = (12×2) + (6×1)
= 24 + 6
= 30 g/mol
Mass of C₂H₆ = 90 g
Mole of C₂H₆ =?
Mole = mass / molar mass
Mole of C₂H₆ = 90 / 30
Mole of C₂H₆ = 3 moles.
Finally, we shall determine the volume of O₂ required. This is illustrated:
2C₂H₆ + 7O₂ —> 4CO₂ + 6H₂O
From the balanced equation above, we can say that:
2 L of C₂H₆ required 7 L of O₂.
Therefore, 3 L of C₂H₆ will require
= (3 × 7)/ 2 = 10.5 L of O₂.
Thus, 10.5 L of O₂ is required for the reaction.
If 1.00 g of KCl is completely dissolved in 24.5 g of water, what is the percent composition (by mass) of the solution that is formed?
Answer:
3.92%
Explanation:
The solution that is formed is of KCl in water. This means that the percent composition by mass is given by the formula:
Mass of KCl / Mass of Solution * 100%We now calculate the mass of solution:
Mass of Solution = Mass of KCl + Mass of Water = 1.00 g + 24.5 gMass of Solution = 25.5 gFinally we calculate the percent composition:
1.00 g / 25.5 g * 100% = 3.92%Carbon-11 decays by position emission.The nuclide formed product is
Answer:
They demonstrated that carbon-11 decays by positron emission to the stable nuclide 11B [Eq. (1)].
which solution has a higher percent ionization of the acid , a .10 M solution of HC2H3O2 (aw) or a .010 M solution of HC2H3O2(aq)
Answer:
0.0010 M of HC2H302(aq)
At a certain temperature the rate of this reaction is first order in HI with a rate constant of 0.0632 s
2HI g = H2 g + I2 g
Suppose a vessel contains HI at a concentration of 1.28M. Calculate how long it takes for the concentration of HI to decrease to 17.0% of its initial value.
Answer:
[tex]28.037\ \text{s}[/tex]
Explanation:
[tex][A]_0[/tex] = Initial concentration = 1.28 M
[tex][A][/tex] = Final concentration = [tex]0.17[A]_0[/tex]
k = Rate constant = 0.0632 s
t = Time taken
For first order reaction we have the relation
[tex]kt=\ln\dfrac{[A]_0}{[A]}\\\Rightarrow t=\dfrac{\ln\dfrac{[A]_0}{[A]}}{k}\\\Rightarrow t=\dfrac{\ln\dfrac{[A]_0}{0.17[A]_0}}{0.0632}\\\Rightarrow t=28.037\ \text{s}[/tex]
Time taken to reach the required concentration would be [tex]28.037\ \text{s}[/tex].
A sample of polonium-210 has an initial mass of 390 milligrams (mg). If the half-life of polonium-210 is 36 days, how many mg of the sample remains after 36 days?
A.
48.75 mg
B.
392 mg
C.
97.5 mg
D.
195 mg
Answer:
d
Explanation:
But Are Punnett square percentages always correct?
Answer:
yes
Explanation:
cuz is a square and if all angles are equal of a square then it is correct
What is the wavelength of a photon with an energy of 3.26 x 10-19 J?
A. 527 nm
B. 610 nm
C. 492 nm
D. 671 nm
Answer:
610 nm
Explanation:
Apx
The more energy that particles have, the ___ they move.
The more energy that particles have, the more they move.
4 NH3 (g) + 7 O2 (g) 4 NO2 (g) + 6 H2O (g)
The combustion of 28.8 g of ammonia consumes __________ g of oxygen.
Answer:
21
Explanation:
CH4 +2H2S = CS2+ 4H2
If the reaction shifts to the right what are the products?
If the reaction shifts to the right, which chemicals decrease in The process?
If the reaction shifts to the left what are the products?
If the reaction shifts to the left, which chemicals decrease in the process?
Calculate the specific heat capacity for bone based on the above data. Show your work.
Answer:
What above data?
Explanation:
There is no data to be seen here.
Which statement best defines the term innate behavior?
behavior that is taught through watching others
behavior that is simple, untaught, and born knowing
behavior that is taught through both good and bad experiences
behavior that is untaught but very complex
Answer: behavior that is simple, untaught, and born knowing
Have a nice dam day!!
The term that describes innate behavior is:
D. behavior that is untaught but very complex
What does innate behavior stand for?Intr-insic or "intuitive" ways of behaving are innate and don't need learning or related knowledge to be performed. Models incorporate romance and ways of behaving, departure and guarded moves, and hostility. Movement and Migration Innate or ins-tinctual behaviors rely on response to sti-muli.
Thus, option D is correct.
Find more information about Innate behavior here:
brainly.com/question/14311636
how real gases differ from ideal gases?
An ideal gas is one that follows the gas laws at all conditions of temperature and pressure. To do so, the gas would need to completely abide by the kinetic-molecular theory. On the other hand, a real gas is a gas that does not behave according to the assumptions of the kinetic-molecular theory.
Furthermore, the particles of an ideal gas are extremely small and have a mass equivalent to practically zero. Ideal gas particles also have no volume.
An example of a real gas is helium, oxygen, and nitrogen.
What mass of iron(III) oxide will be formed if 9.30 L of oxygen at STP react with excess iron?
Answer:
12
Explanation:
because that plot and the iron
The object shown is made of glass. What is it called?
Answer: prism
Explanation: A prism is a polyhedron, with two parallel faces called bases. The other faces are always parallelograms. The prism is named by the shape of its base.
A 25.0 mL NaOH solution of unknown concentration was titrated with a 0.189 M HCl solution. 19.6 mL HCl was required to reach the equivalence point. In a separate titration, a 10.0 mL H3PO4 solution was titrated with the same NaOH solution. This time, 34.9 mL NaOH was required to reach the equivalence point. What is the concentration of the H3PO4 solution
Answer:
0.172 M
Explanation:
The reaction for the first titration is:
HCl + NaOH → NaCl + H₂OFirst we calculate how many HCl moles reacted, using the given concentration and volume:
19.6 mL * 0.189 M = 3.704 mmol HClAs one HCl mol reacts with one NaOH mol, there are 3.704 NaOH mmoles in 25.0 mL of solution. With that in mind we determine the NaOH solution concentration:
3.704 mmol / 25.0 mL = 0.148 MAs for the second titration:
H₃PO₄ + 3NaOH → Na₃PO₄ + 3H₂OWe determine how many NaOH moles reacted:
34.9 mL * 0.148 M = 5.165 mmol NaOHThen we convert NaOH moles into H₃PO₄ moles, using the stoichiometric coefficients:
5.165 mmol NaOH * [tex]\frac{1mmolH_3PO_4}{3mmolNaOH}[/tex] = 1.722 mmol H₃PO₄Finally we determine the H₃PO₄ solution concentration:
1.722 mmol / 10.0 mL = 0.172 MWhich is the function of the organ shown below
Answer:
c the pancreas produce enzyme that breakdown carbohydrate protein and fat
Based on the molar masses. how can you tell that an equation is balanced
A compound containing phosphorus and oxygen has a molar mass of 157.9 g/mol and an empirical formula of PO3 .
Answer: The molecular formula of the compound is [tex]P_2O_6[/tex]
Explanation:
The molecular formula is the chemical formula that tells about the number of atoms of each element present in a compound. Molecular formula and empirical formula can also be the same when the number of atoms is in the simplest whole-number ratio.
To calculate the molecular formula, the number of atoms of the empirical formula is multiplied by a factor known as valency that is represented by the symbol, 'n'.
[tex]n=\frac{\text{Molecular mass}}{\text{Empirical mass}}[/tex] ...(1)
Given empirical formula is [tex]PO_3[/tex]
Empirical mass = [tex][(1\times 30.97) + (3\times 15.99)]=78.94 g/mol[/tex]
Molecular mass = 157.9 g/mol
Plugging values in equation 1:
[tex]n=\frac{157.9 g/mol}{78.94g/mol}\\\\n=2[/tex]
Molecular formula of the compound becomes [tex]P_{2\times 1}O_{2\times 3}=P_2O_6[/tex]
Hence, the molecular formula of the compound is [tex]P_2O_6[/tex]
name the process which takes place when propene gas molecules are converted into a giant molecule
Answer:
Polymerization, any process in which relatively small molecules, called monomers, combine chemically to produce a very large chainlike or network molecule, called a polymer. The monomer molecules may be all alike, or they may represent two, three, or more different compounds.
I need the correct answers
Answer:
Acids: Tastes Sour
Has a ph less than 7
Base: Bitter
Has a ph greater than 7
slippery
Acid&Base: Conducts electricity
Mechanical digestion begins in the_____ and involves physical processes, such as chewing.
Answer:
begins in the mouth
A sample of polonium-210 has an initial mass of 390 milligrams (mg). If the half-life of polonium-210 is 36 days, how many mg of the sample remains after 72 days?
A.
392 mg
B.
195 mg
C.
97.5 mg
D.
48.75 mg
Answer: D. 48.75
Explanation: just took the test
Answer:
D
Explanation:
I got this question right on my test.
What is the empirical formula for a compound if a 2.50g sample contains 0.900g of calcium and 1.60g
of chlorine? (3pts]
Answer:
CaCl₂
Explanation:
First we convert the given masses of elements into moles, using their respective molar masses:
0.900 g Ca ÷ 40 g/mol = 0.0225 mol Ca1.60 g Cl ÷ 35.45 g/mol = 0.045 mol ClNow we divide those numbers of moles by the lowest value among them:
0.0225 mol Ca / 0.0225 mol = 10.045 mol Cl / 0.0225 mol = 2Meaning the empirical formula for the compound is CaCl₂.
Air trapped in a cylinder fitted with a piston occupies 142.8 mL at 0.97 kPa pressure.
What is the new volume of air when the pressure is increased to 1.5 kPa by applying force
to the piston?
Answer:
92.344mL
Explanation:
acording to boyle's law that PV=constant then P1V1=P2V2
Select the correct answer.
What quantity might be measured in units of kilograms?
A.
the brightness of a candle
B.
the volume of a bottle
C.
the mass of a marble
D.
the electric current in a wire
Answer:
The mass of a marble.
Explanation:
Units of the other answers:
A: Light - Lumen (lm)
B: Volume - cm^3
D: Electric current - Ampere
What is the most likely meaning of concentration in paragraph 7?thinking thinking about about one one thing thing in in a a focused focused waywayamount amount of of a a substance substance found found in in waterwaterarea area where where something something comes comes fromfromchance chance to to be be foundfound
Answer:
amount of a substance found in water.
Answer:
amount of a substance found in water.
Explanation:
A 35 Liter tank of Oxygen is at 315 K with an internal pressure of 190 atmospheres. How many moles of gas does the tank contain?
In both industry and research there are often times when one particular component of a mixture needs to be separated from a solution. Maybe it is a rare metal that is dissolved in a mixture of minerals. Maybe it is a particular protein from lysed plant cells. If the desired component is volatile, distillation could be used. But if the goal is to separate ions in solution, fractional precipitation is preferred.
a. True
b. False
Answer:
a. True
Explanation:
Distillation process is a process that is used to separate the components or the substances from the liquid mixtures by using selectively boiling and condensation.
While fractional precipitation is a process which separates the ions from solution based on the different solubilities.
Therefore, the answer is true.
HOW MANY MOLES OF CS2 FORMS WHEN 2.7 MOLE C REACTS
