in the reaction below, 4.44 atm each of h2 and br2 were placed into a 1.00 l flask and allowed to react:

Answers

Answer 1

The chemical equation for the reaction between hydrogen gas (H2) and bromine gas (Br2) is given as follows:  H2(g) + Br2(g) → 2HBr(g)In the reaction below, 4.44 atm each of H2 and Br2 was placed into a 1.00 L flask and allowed to react, and the following equilibrium was reached:

H2(g) + Br2(g) ⇌ 2HBr(g)Initially, the pressures of H2 and Br2 was 4.44 atm each. This means the total pressure in the flask before the reaction began was: Ptotal = PH2 + PBr2Ptotal = 4.44 atm + 4.44 atm = 8.88 atmSince the reaction is taking place in a closed system, the volume of the flask remains constant, and we can assume that the total number of moles of gas remains constant too.Let's assume that 'x' moles of H2 react with 'x' moles of Br2 to form 2x moles of HBr. Then, the number of moles of H2 remaining in the flask is (4.44 - x), the number of moles of Br2 remaining is (4.44 - x), and the number of moles of HBr formed is (2x).Using the ideal gas law, we can find the equilibrium pressure of each gas:PH2 = (nH2RT) / V  = [(4.44 - x) RT] / 1.00PBr2 = (nBr2RT) / V = [(4.44 - x) RT] / 1.00PHBr = (nHBrRT) / V = [2x RT] / 1.00At equilibrium.

The total pressure in the flask is P total, so we have: P total = PH2 + PBr2 + PHBr8.88 atm = [(4.44 - x) RT / 1.00] + [(4.44 - x) RT / 1.00] + [2x RT / 1.00]8.88 atm = [(8.88 - 2x) RT / 1.00] + [2x RT / 1.00]8.88 atm = [(8.88 - x) RT / 1.00]2x RT = x RT / 4.44x = 0.222 moles Hence, the number of moles of HBr produced is 2x = 0.444 moles  The equilibrium pressure of HBr is:PHBr = (nHBrRT) / V = (0.888 mol RT) / 1.00 L = 0.888 RT atm equilibrium pressure of HBr is 0.888 atm.

To know more about chemical equation refer to:

https://brainly.com/question/29886207

#SPJ11


Related Questions

Find solutions for your homework

science

chemistry

chemistry questions and answers

a student dissolves 10.8 g of sodium chloride ( nacl)in 300.g of water in a well-insulated open cup. he then observes the temperature of the water fall from 23.0∘c to 22.6∘c over the course of 9 minutes. use this data, and any information you need from the aleks data resource, to answer the questions below about this reaction: nacl(s)→na+(aq)+cl−(aq) you can

Question: A Student Dissolves 10.8 G Of Sodium Chloride ( NaCl)In 300.G Of Water In A Well-Insulated Open Cup. He Then Observes The Temperature Of The Water Fall From 23.0∘C To 22.6∘C Over The Course Of 9 Minutes. Use This Data, And Any Information You Need From The ALEKS Data Resource, To Answer The Questions Below About This Reaction: NaCl(S)→Na+(Aq)+Cl−(Aq) You Can




Show transcribed image text

Expert Answer

1st step

All steps

Final answer

Step 1/3

1.


To determine whether this reaction is exothermic, endothermic, or neither, we need to consider the change in temperature that occurred when the NaCl dissolved in water. In this case, the temperature of the water fell from23.0°C to 22.6°C over the course of 9 minutes, indicating that heat was released by the reaction. Therefore, we can conclude that the reaction is exothermic.


a. exothermic


View the full answer

Step 2/3

Step 3/3

Final answer

Transcribed image text:

A student dissolves 10.8 g of sodium chloride ( NaCl)in 300.g of water in a well-insulated open cup. He then observes the temperature of the water fall from 23.0∘C to 22.6∘C over the course of 9 minutes. Use this data, and any information you need from the ALEKS Data resource, to answer the questions below about this reaction: NaCl(s)→Na+(aq)+Cl−(aq) You can make any reasonable assumptions about the physical properties of the solution. Be sure answers you caiculate using measured data are rounded to 1 significant digit. Note for advanced students' it's possible the student did not do the experiment carefully, and the values you calculate may not be the same as the known and published values for this reaction.

Answers

The temperature of the water decreases when the NaCl is dissolved in water. The energy released when the salt is dissolved in water is greater than the energy consumed in warming the salt and water to the initial temperature of 23.0 ∘C.

The heat lost by the solution is given by the following equation: Q = msΔTQ = Heat absorbed or released by the system m = mass of water = 300 gΔT = Change in temperature of the system = 0.4 Ks = Specific heat of water = 4.184 J/g K Now we will calculate the amount of heat released during the reaction. 1.

The amount of heat released by the NaCl in the reaction will be equal to the amount of heat absorbed by the water in cooling down from 23.0 ∘C to 22.6 ∘C. Hence, the value of Q will be negative. Q = -msΔTQ = -(300 g) (4.184 J/g K) (0.4 K)Q = -501.12 J2. The amount of heat released by the NaCl will be equal to the amount of heat absorbed by the water.

To know more about dissolved visit:

https://brainly.com/question/2364287

#SPJ11

What is the ph of a 0.0000001 molar HCL?

What is the ph of a 0.0450 molar of Ba(OH)2?

Note: Focus on how these compounds dissociate with H20

Answers

The pH of a 0.0000001 Molar HCl solution is 7.

Since HCl is a strong acid, it dissociates completely in water to form H+ and Cl- ions.

The concentration of H+ ions in the solution will be equal to the concentration of the HCl, which is 0.0000001 Molar.

Using the pH scale, we can calculate the pH of this solution as follows:pH = -log [H+]pH = -log 0.0000001pH = 7

The pH of the solution is 7, which is neutral.

The pH of a 0.0450 Molar Ba(OH)2 solution is 12.

Since Ba(OH)2 is a strong base, it dissociates completely in water to form Ba2+ and OH- ions.

The concentration of OH- ions in the solution will be twice the concentration of Ba(OH)2, which is 0.0450 Molar.

Using the pH scale, we can calculate the pH of this solution as follows:pOH = -log [OH-]pOH = -log (2 x 0.0450)pOH = 1.34pH + pOH = 14pH = 14 - 1.34pH = 12.66

The pH of the solution is 12.66, which is basic.

For more question on molar

https://brainly.com/question/29424807

#SPJ8

calculate the percent ionization in a 0.56 m aqueous solution of phenol (c6h5oh), if the ph is 5.07 at 25°c (ka = 1.3 x 10−10).

Answers

Phenol has the chemical formula C6H5OH. It is a weak acid and when dissolved in water it undergoes an ionization reaction as shown below C6H5OH(aq) + H2O(l) ⇌ H3O+(aq) + C6H5O-(aq).

K a = \[\frac{[H_3O^+][C_6H_5O^-]}{[C_6H_5OH]}\]The Ka for phenol is given as 1.3 × 10−10.Let x be the degree of dissociation of phenol.The initial concentration of phenol is 0.56 M.The concentration of the undissociated phenol is (0.56 - x) M.The concentrations of the H3O+ and C6H5O− ions are each x M. Applying the weak acid equilibrium reaction and Ka expression, we have;Ka = \[\frac{[H_3O^+][C_6H_5O^-]}{[C_6H_5OH]}\]1.3 × 10−10 = \[\frac{x^2}{0.56 - x}\]Since x is very small compared to 0.56,

We can safely assume that 0.56 - x ≈ 0.56.So, 1.3 × 10−10 = x2/0.56x = √(1.3 × 10−10 × 0.56)x = 1.129 × 10−6The percent ionization of phenol is given by;Percent ionization = \[\frac{x}{[C_6H_5OH]}\]Percent ionization = \[\frac{1.129 \times 10^{-6}}{0.56} \times 100\% = 0.000202 \times 100\% = 0.0202\%\]Therefore, the percent ionization of phenol in a 0.56 m aqueous solution is 0.0202%.

To know more about chemical formula visit :

https://brainly.com/question/32018188

#SPJ11

the molar solubility of mg(cn)₂ is 1.4 × 10⁻⁵ m at a certain temperature. determine the value of ksp for mg(cn)₂.

Answers

The task is to determine the value of Ksp for Mg(CN)2. Before solving the problem, Ksp is known as solubility product constant, and it is used to show the solubility of any ionic compound in water.

The molar solubility of Mg(CN)2 is 1.4 × 10⁻⁵ M. We know that Mg(CN)2 dissociates as: Mg(CN)2(s) ⇔ Mg²⁺(aq) + 2CN⁻(aq). Thus, the equilibrium concentration of Mg²⁺ ions is "s", and the equilibrium concentration of CN⁻ ions is "2s".

The Ksp expression for Mg(CN)2 as Ksp = [Mg²⁺][CN⁻]²Ksp = (s)(2s)²Ksp = 4s³We know that s = molar solubility of Mg(CN)2 = 1.4 × 10⁻⁵ M. Solving for Ksp Ksp = 4s³Ksp = 4(1.4 × 10⁻⁵)³Ksp = 1.5 × 10⁻¹³. Therefore, the value of Ksp for Mg(CN)2 is 1.5 × 10⁻¹³.

To know more about solubility visit:

https://brainly.com/question/31493083

#SPJ11

What is the most likely fate of a protein with an N-terminal hydrophobic sorting signal and an additional internal hydrophobic domain of 22 amino acids?
A: The protein stays in the cytosol
B: The protein is transported to mitochondria
C: Because the protein has an N-terminal sorting signal, the protein is translocated all the way into the ER lumen
D: The hydrophobic domain is recognized as a transmembrane domain once it is in the translocation channel and released sideways into the membrane

Answers

The most likely fate of a protein with an N-terminal hydrophobic sorting signal and an additional internal hydrophobic domain of 22 amino acids correct option is B. the protein is transported to mitochondria.

A protein is a macromolecule composed of amino acid chains joined together by peptide bonds. They can perform various functions, including catalyzing metabolic reactions, replicating DNA, responding to stimuli, and transporting molecules from one location to another within cells. The N-terminal sorting signal is a short sequence of amino acids that is present at the start of a protein. The sorting signal is responsible for directing the protein to its appropriate location within the cell. A protein with an N-terminal hydrophobic sorting signal and an additional internal hydrophobic domain of 22 amino acids is transported to mitochondria.

The presence of both an N-terminal hydrophobic sorting signal and an internal hydrophobic domain suggests that the protein is destined for transport to the mitochondria. Mitochondria are the primary organelles responsible for generating cellular energy. They are surrounded by a double membrane, the innermost of which is highly selective and aids in the transport of molecules and proteins necessary for energy production.

To know more about catalyzing visit:-

https://brainly.com/question/31836098

#SPJ11

In a chemical reaction, what is the limiting reactant?
Check all that apply.
Check all that apply.
The reactant that makes the most amount of product.
The reactant that determines the maximum amount of product that can be formed in a reaction.
The reactant that runs out first.
The reactant that makes the least amount of produ

Answers

The reactant that runs out first and The reactant that determines the maximum amount of product that can be formed in a reaction are the correct options.

:In a chemical reaction, a limiting reactant is the one that gets used up first, limiting the amount of product that can be formed. The limiting reactant determines the maximum amount of product that can be produced in a chemical reaction. The other reactants involved in the reaction are called excess reactants because they exist in abundance and do not limit the reaction.

\If the limiting reactant is completely consumed, the reaction ceases even if there is still an excess of other reactants left. Thus, the limiting reactant controls the reaction.

To know more about reactant visit:

https://brainly.com/question/30129541

#SPJ11

explain how the following mutations would affect the transcription of the yeast gal1 gene in the presence of galactose.

Answers

The yeast gal1 gene encodes for an enzyme involved in the metabolism of galactose. There are three mutations that could affect the transcription of this gene in the presence of galactose. These mutations are as follows:Deletion of the TATA box:

The TATA box is a DNA sequence that helps RNA polymerase bind to the promoter region of the gene and initiate transcription. If the TATA box is deleted, it would be more difficult for RNA polymerase to bind to the promoter region and initiate transcription. This would result in a decrease in transcription of the gene.Promoter mutation: The promoter is the region of the gene where RNA polymerase binds and initiates transcription. If there is a mutation in the promoter region, it could affect the ability of RNA polymerase to bind and initiate transcription. This would result in a decrease in transcription of the gene.Insertion of a repressor sequence: A repressor sequence is a DNA sequence that inhibits transcription. If a repressor sequence is inserted into the promoter region of the gene,

it would prevent RNA polymerase from binding and initiating transcription. This would result in a decrease in transcription of the gene.In main answer, The three mutations that could affect the transcription of the yeast gal1 gene in the presence of galactose are Deletion of the TATA box, Promoter mutation, and Insertion of a repressor sequence. In explanation, the deletion of the TATA box would be more difficult for RNA polymerase to bind to the promoter region and initiate transcription, resulting in a decrease in transcription of the gene. If there is a mutation in the promoter region, it could affect the ability of RNA polymerase to bind and initiate transcription. A repressor sequence inserted into the promoter region of the gene would prevent RNA polymerase from binding and initiating transcription, resulting in a decrease in transcription of the gene.

To know more about enzyme visit:

https://brainly.com/question/30361820

#SPJ11

when moderately compressed, gas molecules have _______ attraction for one another.

Answers

When moderately compressed, gas molecules have very little attraction for one another with an below. A gas is a state of matter that is highly compressible, which means that its volume can be reduced by compressing and that it expands to fill any available space.

The kinetic energy of the gas molecules is the driving force behind this behavior. The gas molecules are in constant motion, colliding with one another and with the walls of the container in which they are contained. The intermolecular forces of attraction between gas molecules are negligible when the gas is moderately compressed. In other words, when the pressure of

the gas is not too high, the attractive forces between the molecules are negligible. This is because the distance between the molecules is too great for the attractive forces to have any significant effect. The ideal gas law, PV=nRT, assumes that the molecules of a gas have zero volume and do not interact with one another. While real gases do have volume and do interact with one another, the ideal gas law is a good approximation of the behavior of gases under most conditions.

To know more about molecules Visit;

https://brainly.com/question/29690633

#SPJ11

One way the U.S. Environmental Protection Agency (EPA) tests for chloride contaminants in water is by titrating a sample of silver nitrate solution. Any chloride anions in solution will combine with the silver cations to produce bright white silver chloride precipitate. Suppose an EPA chemist tests a 200. mL sample of groundwater known to be contaminated with iron(II) chloride, which would react with silver nitrate solution like this: feCl_2(aq) + 2 AgNO_3 (aq) rightarrow 2 AgCl(s) + Fe(NO_3)_2(aq) The chemist adds 48.0 mM silver nitrate solution to the sample until silver chloride stops forming, she then washes, dries, and weighs the precipitate. She finds she has collected 8.5 mg of silver chloride. calculate the concentration of iron(II) chloride contaminant in the original groundwater sample. Be sure your answer has the correct number of significant digits.

Answers

The concentration of iron(II) chloride contaminant in the original groundwater sample is 109.5 mg/L or 109.5 ppm.

To calculate the concentration of iron (II) chloride contaminant in the original groundwater sample, follow the steps below:

Step 1: Write the balanced chemical equation for the reaction between iron(II) chloride and silver nitrate.feCl2(aq) + 2 AgNO3(aq) → 2 AgCl(s) + Fe(NO3)2(aq)

Step 2: Calculate the moles of silver nitrate used.

The molarity of silver nitrate = 48.0 mM or 0.0480 M

The volume of silver nitrate = 200. mL or 0.200 L

Number of moles of silver nitrate = Molarity × Volume= 0.0480 M × 0.200 L= 0.00960 mol

Step 3: Determine the number of moles of silver chloride formed. The balanced equation shows that 1 mole of iron(II) chloride reacts with 2 moles of silver nitrate to form 2 moles of silver chloride.

Moles of AgCl = (moles of AgNO3 used ÷ 2) = 0.00960 mol ÷ 2= 0.00480 mol

Step 4: Convert moles of silver chloride to mass.

The molar mass of AgCl = 143.32 g/molMass of AgCl = Moles of AgCl × Molar mass= 0.00480 mol × 143.32 g/mol= 0.689 g or 689 mgStep 5: Calculate the concentration of iron(II) chloride in the original groundwater sample.Mass of iron(II) chloride = Mass of AgCl × (1 mol FeCl2 ÷ 2 mol AgCl)× (126.75 g FeCl2 ÷ 1 mol FeCl2)= 689 mg × (1 mol FeCl2 ÷ 2 mol AgCl) × (126.75 g FeCl2 ÷ 1 mol FeCl2)= 21943.625 mg or 21.9 gThe original volume of groundwater sample = 200. mL or 0.200 L

Concentration of iron(II) chloride in the groundwater sample = (Mass of iron(II) chloride ÷ Volume of sample)× (1 L ÷ 1000 mL)= (21.9 g ÷ 0.200 L) × (1 L ÷ 1000 mL)= 109.5 mg/L or 109.5 ppmT

To know more about Molar Mass visit:

https://brainly.com/question/31545539

#SPJ11

What is the concentration of OH-in an aqueous solution with [H3O+] = 1.0 x 10-11 M?
O 1.0 x 103 M
○ 1.0 x 10-11M
○ 4.0 x 10-11 M
O 11.0

Answers

The concentration of OH- in the aqueous solution is 1.0 x 10-3 M.

What is the concentration of hydroxide ions in the solution?

In an aqueous solution, the concentration of hydroxide ions (OH-) can be determined based on the concentration of hydronium ions (H3O+).

The relationship between the two can be expressed using the concept of the pH scale, where pH is defined as the negative logarithm of the H3O+ concentration.

Given that the H3O+ concentration is 1.0 x 10-11 M, we can determine the concentration of OH- using the relationship Kw = [H3O+][OH-]. Kw represents the ion product of water and is equal to 1.0 x 10-14 at 25°C.

Rearranging the equation, we find [OH-] = Kw / [H3O+].

Substituting the values, we get [OH-] = (1.0 x 10-14) / (1.0 x 10-11) = 1.0 x 10-3 M.

Therefore, the concentration of OH- in the aqueous solution is 1.0 x 10-3 M.

Learn more about aqueous solution

brainly.com/question/1382478

#SPJ11

what is the net ionic equation for the reaction between aqueous solutions of sr(no3)2 and k2so4?

Answers

A net ionic equation is a chemical equation that shows the reaction that occurred between ions in aqueous solutions. It focuses on the ions that were changed during the reaction.

The first step of writing a net ionic equation involves writing the balanced molecular equation for the reaction. Sr(NO3)2 and K2SO4 are soluble salts that will dissociate in water to give their constituent ions. The balanced molecular equation for this reaction can be written as: Sr(NO3)2 (aq) + K2SO4 (aq) → 2KNO3 (aq) + SrSO4 (s)The next step is to determine the ions that were involved in the reaction. Only the ions that changed during the reaction are included in the net ionic equation.

The potassium and nitrate ions are not involved in the reaction. Therefore, they are excluded from the net ionic equation. The net ionic equation is:2Sr²⁺ (aq) + SO4²⁻ (aq) → SrSO4 (s)Hence, the net ionic equation for the reaction between aqueous solutions of Sr(NO3)2 and K2SO4 is 2Sr²⁺ (aq) + SO4²⁻ (aq) → SrSO4 (s).

To know more about reaction visit:

https://brainly.com/question/30464598

#SPJ11

Some chemical reactants are listed in the table below. Complete the table by filling in the oxidation state of the highlighted atom. species oxidation state of highlighted atom OH (aq) __
NH4 (aq) __
I (aq) __
Br2(g) __

Answers

The oxidation state of the highlighted atoms in the chemical species is as follows:

O in OH⁻ is -2N in NH₄ (aq) is -3I in I⁻ (aq) is -1B in Br₂ is 0

What are the oxidation states of the atoms in the chemical reactants?

An atom's oxidation number or oxidation state in a chemical species reveals how many electrons it has lost or gained in a compound or ion.

In OH⁻ (aq), the highlighted atom is oxygen (O), and its oxidation state is -2.

In NH₄ (aq), the highlighted atom is nitrogen (N), and its oxidation state is -3.

In I⁻ (aq), the highlighted atom is iodine (I), and its oxidation state is -1.

In Br₂(g), the highlighted atom is bromine (Br), and since it is in its elemental form, its oxidation state is 0.

Learn more about oxidation state at: brainly.com/question/25551544

#SPJ4

How many liters of solution can be produced from 2.5 moles of solute if a 2.0 M
solution is needed?
a.5.0 L
b.4.5 L
c.1.25 L
d..1.0 L

Answers

We know the formula to calculate the volume of the solution is :V= n/CWhere,V is the volume of the solution n is the number of moles of the solute.C is the concentration of the solution In this question, the number of moles of the solute is 2.5 and the concentration of the solution is 2.0M.The correct option is (b) 4.5 L.

Therefore, we have, V = n/CV= 2.5 / 2.0V= 1.25 LSo, 1.25 L solution is produced by dissolving 2.5 moles of solute in a 2.0 M solution.Now we have to calculate how many liters of solution is produced from 2.5 moles of solute when a 2.0 M solution is required. Concentration of the solution is given by the formula :C= n/V Where, C is the concentration of the solution.n is the number of moles of the solute. V is the volume of the solution Let's plug in the given values,2.0 M = 2.5/ VV = 2.5 / 2.0 MV = 1.25 LSo, 1.25 L solution is produced from 2.5 moles of solute when a 2.0 M solution is required. Answer: b.4.5 L

For more information on solution visit:

brainly.com/question/1616939

#SPJ11

5. how much of an 800-gram sample of potassium-40 will remain after 3.9 × 109 years of radioactive decay?
1) 50 grams
2)100 grams
3)200 grams
4)400 grams

Answers

The answer to how much of an 800-gram sample of potassium-40 will remain after 3.9 × 109 years of radioactive decay is option (3) "200 grams."

The amount of an 800-gram sample of potassium-40 that will remain after 3.9 × 109 years of radioactive decay can be calculated by using the radioactive decay law. The radioactive decay law states that the number of radioactive nuclei N of a sample decreases as a function of time t. This can be given by the equation N = N₀ e^(-λt)

Where N₀ is the initial number of radioactive nuclei, λ is the decay constant, and t is the time.

The decay constant is related to the half-life T½ of the radioactive isotope by the equation

T½ = ln2 / λ Given that the half-life of potassium-40 is 1.28 × 10^9 years,

we can find the decay constant as follows

λ = ln2 / T½

= ln2 / (1.28 × 10^9)

= 5.43 × 10^-10 year^-1

Substituting the given values into the radioactive decay law, we get

N = 800 e^(-5.43 × 10^-10 × 3.9 × 10^9)N ≈ 200 grams

Therefore, the answer is option (3) 200 grams.

To know more about radioactive decay visit:

https://brainly.com/question/1770619

#SPJ11

Which choice lists the following compounds in order of increasing solubility in water?
I. CH3–CH2–CH2–CH3 II. CH3–CH2–O–CH2–CH3 III. CH3–CH2–OH IV. CH3–OH
A. I < III < IV < II
B. I < II < IV < III
C. III < IV < II < I
D. I < II < III < IV

Answers

The compounds in increasing order of solubility in water are I < II < IV < III.

Water is a polar substance that has the ability to dissolve other polar substances. Water's polarity enables it to pull apart ionic compounds. In contrast, water is not able to dissolve nonpolar substances. A polar compound will only dissolve in water if it is more polar than water or if it is capable of hydrogen bonding with water.

The increasing order of solubility in water from the given compounds can be determined as follows:

CH3–CH2–CH2–CH3 (I) is a hydrocarbon, which is a nonpolar substance and will not dissolve in water.

Thus, it is the least soluble in water.

CH3–CH2–O–CH2–CH3 (II) is an ether compound with a polar oxygen atom in the center.

It is more soluble in water than hydrocarbons but less soluble than alcohols.

CH3–CH2–OH (III) is an alcohol compound that contains a polar -OH group.

This polar group is capable of forming hydrogen bonds with water molecules, making it the most soluble in water.

CH3–OH (IV) is another alcohol compound that is similar to compound III.

Thus, it will be more soluble in water than hydrocarbons and ether compounds but less soluble than compound III.

Therefore, the compounds in increasing order of solubility in water are I < II < IV < III.

Option A, I < III < IV < II, is the exact opposite order, and hence it is incorrect.

Option B, I < II < IV < III, is the correct order and is the answer to the question.

Option C, III < IV < II < I, is in reverse order, and therefore, it is incorrect.

Option D, I < II < III < IV, is incorrect as it places alcohol CH3–OH (IV) before CH3–CH2–OH (III) which is not possible as the former is less soluble than the latter.

Learn more about the solubility:

brainly.com/question/23946616

#SPJ11

find the percent dissociation of a 0.100 mm solution of a weak monoprotic acid having ka=1.8×10−3ka=1.8×10−3 .

Answers

The percent dissociation of a 0.100 M solution of a weak monoprotic acid having Ka = 1.8 × 10-3 can be calculated using the following steps.

Calculate the concentration of H+ ions produced in the solution by dissociation of the acid. Let the concentration of H+ ions be [H+].[H+] = √(Ka[C])where Ka is the acid dissociation constant and C is the concentration of the weak acid. Given that Ka = 1.8 × 10-3 and C = 0.100 M, we have:[H+] = √(1.8 × 10-3 × 0.100)= 0.012

Calculate the percent dissociation using the equation:% dissociation = [H+] / C × 100%=[0.012 / 0.100] × 100%= 12%Therefore, the percent dissociation of a 0.100 M solution of a weak monoprotic acid having Ka = 1.8 × 10-3 is 12%.

To know more about monoprotic  visit :

https://brainly.com/question/32092334

#SPJ11

A chemical is typically classified as a sensitizer if it causes an allergic reaction after exposure. Based on the SDS information provided, which of the following chemicals used in this lab is most likely classified as a sensitizer ethanol potassium hydroxide benzaldehyde dibenzalacetone Question 10 (1 point) What would happen if the Erlenmeyer flask containing the crude dba in EtOH undergoing recrystallization was moved while still hot directly to the ice bath? Solid would appear more rapidly The solid would contain more impurities The melting range of the solid would be broader All of the above

Answers

Moving the hot Erlenmeyer flask directly to the ice bath during recrystallization would result in all of the above consequences.

What are the possible outcomes if the hot Erlenmeyer flask is transferred directly to the ice bath?

When the hot Erlenmeyer flask is moved directly to the ice bath during recrystallization of the crude dba in EtOH, several consequences can occur simultaneously.

Firstly, the solid would appear more rapidly due to the rapid cooling of the solution, causing the solute to precipitate out faster. However, this rapid crystallization can also lead to the incorporation of impurities into the solid, resulting in a solid that contains more impurities than if the cooling were done gradually.

Additionally, the quick temperature change from hot to cold can lead to a broader melting range of the solid. This is because the rapid cooling can result in the formation of different crystal structures or sizes within the solid, causing variations in the melting behavior.

It is important to note that these consequences are specific to the recrystallization process and the particular compound being handled. The specific details and characteristics of the compound and the recrystallization procedure will determine the extent of these effects.

Learn more about Erlenmeyer flask

brainly.com/question/1851397

#SPJ11

when the need for ribose 5-phosphate is greater than the need for nadph most of the ribulose 5-phosphate is converted into fructose 6-phosphate.

Answers

The pentose phosphate pathway (PPP) is a metabolic pathway that generates NADPH and ribose 5-phosphate (R5P) in mammalian cells. The pathway provides cells with the products they need for biosynthesis, such as nucleic acids, amino acids, and fatty acids.

This pathway is essential for the cell's anabolic processes and is involved in redox homeostasis. It is primarily regulated by the cell's energy requirements. If there is a greater need for NADPH, the PPP flux will increase, and if there is a greater need for R5P, the flux will decrease. When the need for R5P is greater than the need for NADPH, most of the ribulose 5-phosphate is converted into fructose 6-phosphate.

This reaction is catalyzed by the enzyme phosphopentose isomerase, which converts ribulose 5-phosphate to ribose 5-phosphate and then to fructose 6-phosphate. This conversion is irreversible, and the process is known as the oxidative phase of the PPP.

Overall, the pentose phosphate pathway is a crucial metabolic pathway for maintaining redox balance and providing cells with the biosynthetic products they require.

To know more about metabolic pathway visit:

https://brainly.com/question/14794529

#SPJ11

draw the product formed by the reaction of potassium t‑butoxide with (1s,2s)‑1‑bromo‑2‑methyl‑1‑phenylbutane (shown). clearly show the stereochemistry of the product.

Answers

The reaction between potassium t-butoxide with (1S,2S)-1-bromo-2-methyl-1-phenylbutane leads to the formation of (1S,2S)-1-methyl-2-phenylbut-2-ene. This is the E2 reaction involving a strong base and a primary substrate.

The mechanism of the reaction between potassium t-butoxide and (1S,2S)-1-bromo-2-methyl-1-phenylbutane:Explanation: A primary substrate is involved in the reaction which undergoes E2 elimination, leading to the formation of an alkene. Alkene formation is a two-step reaction.

The stereochemistry of the product is illustrated below: Thus, the product formed by the reaction of potassium t-butoxide with (1S,2S)-1-bromo-2-methyl-1-phenylbutane is (1S,2S)-1-methyl-2-phenylbut-2-ene and the stereochemistry of the product is trans.

To know more about primary substrate visit

https://brainly.com/question/31664585

#SPJ11

an antibonding π orbital contains a maximum of ________ electrons.

Answers

An antibonding π orbital contains a maximum of two electrons.

An antibonding molecular orbital, or LUMO (Lowest Unoccupied Molecular Orbital), is a molecular orbital with a higher energy than the atomic orbitals from which it was constructed. The electrons occupying it are thought to have poor overlapping, lowering the stability of the molecule.

One type, known as the π bonding orbital (π bond), is constructed by overlapping two parallel p orbitals with a nodal plane between them, which results in a constructive interference and the formation of a bond. The second kind of π orbital is called the π* antibonding orbital. It is created by the destructive interference of two parallel p orbitals. The π* antibonding orbital has one node and is higher in energy than the π bonding orbital.

To know more about antibonding π orbitals:

https://brainly.com/question/28182742

#SPJ11

The common ion effect can be most effectively used to _________ precipitation of a _________ ionic solid.

Select the correct answer below:

encourage, soluble

discourage, soluble

encourage, slightly soluble

discourage, slightly soluble

Answers

The common ion effect can be most effectively used to discourage precipitation of a soluble ionic solid.

How does the common ion effect impact the precipitation of a slightly soluble ionic solid?

The common ion effect refers to the phenomenon where the presence of an ion already present in a solution reduces the solubility of a compound containing the same ion. It occurs due to the principle of equilibrium in chemical reactions.

In the context of precipitation, when two soluble ionic compounds are mixed, their respective ions dissociate and combine to form an insoluble product, which precipitates out of the solution. However, if one of the ions in the product is already present in high concentration due to the addition of a soluble compound containing that ion, the solubility of the product is reduced.

In this case, the common ion effect can be most effectively used to discourage the precipitation of a slightly soluble ionic solid. By adding a soluble compound containing one of the ions present in the product, the concentration of that ion is increased, shifting the equilibrium towards the dissolved form and reducing the precipitation of the solid.

Therefore, the correct answer is "discourage, slightly soluble" as the common ion effect is used to decrease the solubility and discourage the formation of a slightly soluble ionic solid.

Learn more about  common ion effect

brainly.com/question/30772969

#SPJ11

how many grams of mg would be required to produce 100.00 ml of h2 at a pressure of 1.034 atm and a temperature of 21.01 c?

Answers

The stoichiometry shows that 1 mole of Mg produces 1 mole of H2. Therefore, the number of grams of Mg required is equal to the number of moles of H2. You can multiply the moles of H2 by the molar mass of Mg to get the grams of Mg required.

To calculate the number of grams of Mg required to produce 100.00 mL of H2, we need to use the ideal gas law equation: PV = nRT.
First, we need to convert the temperature to Kelvin by adding 273.15:
T = 21.01°C + 273.15 = 294.16 K
Next, we need to convert the volume from mL to liters:
V = 100.00 mL = 0.100 L
Given that the pressure is 1.034 atm and the temperature is 294.16 K, we can rearrange the ideal gas law equation to solve for moles (n):
n = PV / RT
Substituting the values into the equation, we have:
n = (1.034 atm * 0.100 L) / (0.0821 L·atm/mol·K * 294.16 K)
Solving for n will give us the moles of H2. Since the reaction is:
Mg + 2HCl → MgCl2 + H2
The stoichiometry shows that 1 mole of Mg produces 1 mole of H2. Therefore, the number of grams of Mg required is equal to the number of moles of H2. You can multiply the moles of H2 by the molar mass of Mg to get the grams of Mg required.

To know more about gas law, click here https://brainly.com/question/30458409

#SPJ11

Arrange the following groups of atoms in order of increasing first ionization energy. (Use the appropriate <, =, or > symbol to separate substances in the list.)
a) Be, Rb, Na
b) Se, Se, Te
c) Br, Ni, K
d) Ne, Sr, Se

Answers

The correct order of increasing first ionization energy of the atoms is a) Be > Na > Rb, b) Se > Te, c)  Br > Ni > K, and d) Ne > Sr > Se.

Ionization is defined as the energy required to remove an electron from a neutral atom in its ground state. As the ionization energy increases, the task of removing an electron becomes more challenging. As a result, in general, the first ionization energy increases across a period and decreases down a group because the atomic radius increases.

a) Be, Na, Rb

Be has the smallest atomic radius, Na has the second smallest atomic radius, and Rb has the largest atomic radius of the three elements. Therefore, Rb has the smallest first ionization energy, Na has the second smallest first ionization energy, and Be has the largest first ionization energy. The correct order, then, is Be > Na > Rb.

b) Se, Se, Te

This group of atoms contains duplicate elements. So, Te has a larger atomic radius than Se, and the first ionization energy decreases as the atomic radius increases. The correct order is, therefore, Se > Te.

c) Br, K, Ni

Among these atoms, K has the lowest first ionization energy. Br and Ni have comparable radii, but Ni has a larger atomic radius than Br, making it easier to remove an electron from Br than from Ni. So, the correct order is Br > Ni > K.

d) Ne, Sr, Se

Neon is a noble gas, which means it has a high first ionization energy and is highly stable. The atomic radius of Sr is larger than that of Se, making it easier to remove an electron from Se. So, the correct order is Ne > Sr > Se.

Learn more about ionization energy at: https://brainly.com/question/30831422

#SPJ11

how would you make 10 ml of 1 mm tris, 1 mm edta from stock solutions containing 1m tris, and 0.5m edta?

Answers

To make 10 ml of 1 mM Tris, 1 mM EDTA from stock solutions containing 1 M Tris and 0.5 M EDTA, the following steps are followed First, we will calculate the volume of the stock solutions required. To make 10 ml of a 1 mM solution, we need to use the formula.

C1 = 1 MTris (concentration of stock solution)V1 = ?C2 = 1 mM (concentration of diluted solution)V2 = 10 ml (volume of diluted solution)Putting these values in the above formula, we get: 1 M x V1 = 1 mM x 10 ml V1 = (1 mM x 10 ml) / 1 M V1 = 0.01 ml (volume of stock solution required)Similarly, for EDTA, we have:C1 = 0.5 M EDTAV1 = ?C2 = 1 mM EDTAV2 = 10 ml (volume of diluted solution)0.5 M x V1 = 1 mM x 10 mlV1 = (1 mM x 10 ml) / 0.5 MV1 = 0.2 ml (volume of stock solution required) .

Add the required volumes of the stock solutions to a 10 ml volumetric flask. Fill the flask with distilled water to the 10 ml mark. Mix the contents well to obtain a homogenous solution.Therefore, 0.01 ml of 1 M Tris and 0.2 ml of 0.5 M EDTA are required to make 10 ml of 1 mM Tris, 1 m M EDTA from stock solutions containing 1 M Tris and 0.5 M EDTA.

To know more about volume visit :

https://brainly.com/question/28058531

#SPJ11

how to find acid content in lemon juice via a titration with naoh

Answers

The acid content in lemon juice can be found via titration with NaOH by using an indicator such as phenolphthalein to detect the endpoint of the reaction.

The procedure to determine the acid content in lemon juice via titration with NaOH is as follows:

1. Accurately measure a 10mL aliquot of lemon juice into a clean flask.

2. Add 50 mL of distilled water and 2 drops of phenolphthalein to the flask. Phenolphthalein changes from colorless to pink at the endpoint.

3. Titrate with 0.1 M NaOH from a burette until the solution turns pink. This indicates that all of the acid in the lemon juice has been neutralized by the NaOH.

4. Record the volume of NaOH required to reach the endpoint.

5. Repeat the titration until consistent results are obtained.

6. The acid content of lemon juice can be calculated by multiplying the volume of NaOH used by its molarity and dividing the result by the volume of lemon juice used.

Learn more about titration here:

https://brainly.com/question/31229711

#SPJ11

The compound methylamine, CH3NH2, contains a C-N bond. In this bond, which of the following best describes the charge on the carbon atom? a. slightly negative b. -1 c. slightly positive d. +1 e. uncharged

Answers

The compound methylamine (CH3NH2) contains a covalent bond between the carbon and nitrogen atom, and in the bond, the carbon atom is slightly positive (+δ), So the correct option is C. slightly positive.

The carbon atom has an electronegativity value of 2.55 while the nitrogen atom has an electronegativity value of 3.04. Electronegativity is a measure of the tendency of an atom to attract a bonding pair of electrons. The electronegativity difference between the carbon and nitrogen atom creates a polar bond, with nitrogen pulling electrons towards itself and becoming slightly negative, while carbon loses some electron density and becomes slightly positive in the C-N bond.

Methylamine (CH3NH2) is an organic compound that belongs to the primary amines. It is formed by replacing one hydrogen atom in ammonia with a methyl group (-CH3). The molecule is polar due to the presence of the C-N bond that makes the nitrogen slightly negative and carbon slightly positive

To know more about methylamine visit:-

https://brainly.com/question/28204295

#SPJ11

answer as much as you can please! need help :(

Answers

1. The number of moles of NaOH is 0.00162 moles

2. There are 0.00486 moles of citric acid

3. It is equivalent to 192 g of citric acid.

4. The mass of the citric acid is 12.95 g

What is neutralization?

1) The number of moles of the NaOH

Concentration * volume

= 0.1 M * 16.2/1000 L

= 0.00162 moles

1 mole of NaOH reacts with 3 moles of citric acid

0.00162 moles of NaOH reacts with 0.00162 * 3/1

= 0.00486 moles

Concentration of the citric acid = 0.00486 moles * 1000/25

= 0.19 M

Then;

m/M = CV

m = 0.19 * 355/1000 * 192

= 12.95 g

Learn more about neutralization:https://brainly.com/question/14156911

#SPJ1

Fill in the left side of this equilibrium constant equation for the reaction of 4 -bromoaniline C6H4BrNH2 , a weak base, with water.
___ = Kb

Answers

We can substitute the chemical formula for 4-bromoaniline in this equation and obtain the final answer as:

C6H4BrNH2 + H2O ⇌ C6H4BrNH3+ + OH-Kb = [C6H4BrNH3+][OH-]/[C6H4BrNH2]

Thus, the left-hand side of the given equilibrium constant equation is

C6H4BrNH2

and the complete equation is

:C6H4BrNH2 = Kb

The equilibrium constant (Kb) is used to define the basicity of a compound. When we talk about basicity, it refers to the ability of a compound to take a proton (H+) from another molecule. Here, we need to complete the equation for the equilibrium constant of 4-bromoaniline, a weak base, with water. We know that the reaction of 4-bromoaniline with water takes the following form:

C6H4BrNH2 + H2O ⇌ C6H4BrNH3+ + OH-

We can now write the expression for the Kb of 4-bromoaniline as follows:

Kb = [C6H4BrNH3+][OH-]/[C6H4BrNH2]

We can substitute the chemical formula for 4-bromoaniline in this equation and obtain the final answer as:

C6H4BrNH2 + H2O ⇌ C6H4BrNH3+ + OH-Kb = [C6H4BrNH3+][OH-]/[C6H4BrNH2]

Thus, the left-hand side of the given equilibrium constant equation is

C6H4BrNH2

and the complete equation is:

C6H4BrNH2 = Kb

To know more about bromoaniline visit:

https://brainly.com/question/30978866

#SPJ11

Assume that you have a cylinder with a movable piston. What would happen to the gas pressure inside the cylinder if you do the following?
(a) Decrease the volume to one third the original volume while holding the temperature constant.
increase the pressure by 3 times
double the pressure
decrease the pressure by 1/3
remain the same
(b) Reduce the Kelvin temperature to half its original value while holding the volume constant.
increase by 2 times
increase by 4 times
decrease by two times
decrease by four times
remain the same
(c) Reduce the amount of gas to half while keeping the volume and temperature constant.
increase by 2 times
decrease by 2 times
decrease by 4 times
remain the same

Answers

a) The gas pressure inside the cylinder increases by 3 times when the volume is decreased to one third the original volume while holding the temperature constant.
b) The gas pressure inside the cylinder decreases by two times when the Kelvin temperature is reduced to half its original value while holding the volume constant.
c) The gas pressure inside the cylinder decreases by two times when the amount of gas is reduced to half while keeping the volume and temperature constant.

a) When the volume of a cylinder is reduced to one third of its original volume while maintaining a constant temperature, the pressure undergoes a three-fold increase. The pressure and volume of a gas are inversely proportional to each other, while the temperature of the gas remains constant, according to the Boyle's law of ideal gas. This suggests that if you reduce the volume, the pressure of the gas inside the cylinder will increase, as given below:

The equation P1V1 = P2V2 relates the initial pressure (P1) and volume (V1) to the final pressure (P2) and volume (V2).

P2 = (V1/V2) P1

P2 = (3V1/V1) P1

P2 = 3P1

Therefore, the gas pressure inside the cylinder increases by 3 times when the volume is decreased to one third the original volume while holding the temperature constant.

b) By halving the Kelvin temperature while keeping the volume constant, the gas pressure within the cylinder reduces by a factor of two. The gas pressure is directly proportional to the Kelvin temperature of the gas, while the volume of the gas is constant, according to the Charles's law of ideal gas. This indicates that if the Kelvin temperature of the gas is reduced, the pressure of the gas inside the cylinder will decrease, as given below:

V1/T1 = V2/T2, where V1 and T1 are initial volume and temperature, and V2 and T2 are final volume and temperature, respectively.

P1 = (T2/T1) P2

P2 = (T1/T2) P1

P2 = (2T1/T1) P1

P2 = 0.5P1

Therefore, the gas pressure inside the cylinder decreases by two times when the Kelvin temperature is reduced to half its original value while holding the volume constant.

c) When you reduce the amount of gas to half while keeping the volume and temperature constant, the gas pressure inside the cylinder decreases by two times. The gas pressure and the number of moles of the gas inside the cylinder are directly proportional to each other, while the volume and temperature of the gas are constant, according to the Avogadro's law of ideal gas. This means that if you reduce the number of moles of the gas, the pressure of the gas inside the cylinder will decrease, as given below:

P1/n1 = P2/n2, where P1 and n1 are initial pressure and number of moles, and P2 and n2 are final pressure and number of moles, respectively.

P2 = (n2/n1) P1

P2 = (0.5n1/n1) P1

P2 = 0.5P1

Therefore, the gas pressure inside the cylinder decreases by two times when the amount of gas is reduced to half while keeping the volume and temperature constant.

Learn more about volume at: https://brainly.com/question/14197390

#SPJ11

Which compound below do you expect to have the shortest retention time in the gas chromatograph?
A. 2-methylcyclohexanol
B. 1-methylcyclohexene
C. It is not possible to predict.
D. 3-methylcyclohexene

Answers

The compound that is expected to have the shortest retention time in gas chromatography is D. 3-methyl cyclohexene.

In gas chromatography, the retention time is the time taken for a compound to travel through the column and reach the detector. The retention time depends on various factors such as the volatility, polarity, and interaction with the stationary phase.

In general, less polar and more volatile compounds tend to have shorter retention times in gas chromatography. Among the given options, 3-methyl cyclohexene is the most volatile and least polar compound. It is an alkene, which is generally less polar than alcohols or cyclohexanols.

Therefore, D. 3-methyl cyclohexene is expected to have the shortest retention time in the gas chromatograph compared to the other compounds listed.

Learn more about gas chromatography: https://brainly.com/question/29479890

#SPJ11

Other Questions
The highways and other metropolitan transportation services are frequently described as the lifelines of the metropolitan area. Do you agree with this statement? Why or why not? CAPITAL STRUCTURE The goal of the company is to maximize shareholders' wealth as well as minimize the cost of capital. Capital structure describes the mix of a firm's long-term capital, which is a combination of debt and equity. Capital structure is a type of funding that supports a company's growth and related assets. Sometimes it's referred to as capitalization structure or simply capitalization. A firm's judicious use of debt and equity is a key indicator of a strong balance sheet. A healthy capital structure that reflects a low level of debt and a large amount of equity is a positive sign of investment quality. As such the company must fine an optimal capital structure that minimizes the cost of financing and minimizes the risk of bankruptcy. An optimal capital structure is the basic balance of debt and equity a company should have in order to minimize its cost of capital and the rates it pays to use money to maximize its market value. QUESTION 1 AgarMaju Bhd, is a public listed company listed in Bursa Saham Malaysia. The firm has been operating since the last five years. The company manufactures agricultural equipment. It has an annual earnings before interest and tax (EBIT) of RM800,000 in perpetuity. The interest on debt is 12%. Required: (a) A. B. C. (b) The debt-to-equity ratio is given as 0.20 and its overall cost of capital is14%, calculate the following, if the company operates in the world without tax. i. ii. (4 marks) Assumed that the company's debt outstanding is RM600,000 and its unlevered cost of equity is 15%. The corporate tax is 25%. In the world with taxes, calculate the following: i. The value of the company The value of its equity ii. iii. The value of the company. The value of the equity. The company's weighted average cost of capital (Rwacc) (6 marks) In the world without taxes, explain two (2) assumptions used in the Modigliani- Miller Proposition. (5 marks) Discuss two (2) implications of Modigliani-Miller Proposition II, in the world with taxes for a levered company. (5 marks) Total: 20 marks Description In class we considered Jim's problem of choosing a delivery van. Suppose Jim expects to drive 5,000 miles per year. Compute the breakeven cost of gasoline such that Jim would be indifferent between the two minivans. What do you think of this result? Upload your supporting work. Which minivan should Jim purchase? For $2,800 Jim can purchase a 1998 minivan for his delivery service. It is quite functional, but it only averages 20 miles per gallon (mpg). He has identified a somewhat newer vehicle (roughly the same functionality) that averages 26 mpg. The newer vehicle would cost $4,000. Assume a cost of gasoline $4.00 per gallon. Assume an interest rate of 6%, zero salvage value for either vehicle after three years, and identical maintenance cost. According to solubility rules, which compound should dissolve in water? Select one: , 0 MgCO3 O Caso O AgBI What would be the molecular formula for a polymer made from eight glucose (C6H12O6) molecules linked together by dehydration reactions?Answer choices:C48H80O40orC48H82O41 Determine the velocity of a marble (m = 8.66 g) with a wavelength of 3.46 10-33m.a.45.2 m/sb.11.3 m/sc.22.1 m/sd.38.8 m/se.52.9 m/s It would be appropriate to select subjects for an exposure-based cohort study from certain occupational groups, such as battery workers. True False Always end a bad news message with a positive statement.TRUEFALSE Smartphones: A poll agency reports that 80% of teenagers aged 12-17 own smartphones. A random sample of 250 teenagers is drawn. Round your answers to at least four decimal places as needed. Dart 1 n6 (1) Would it be unusual if less than 75% of the sampled teenagers owned smartphones? It (Choose one) be unusual if less than 75% of the sampled teenagers owned smartphones, since the probability is Below, n is the sample size, p is the population proportion and p is the sample proportion. Use the Central Limit Theorem and the TI-84 calculator to find the probability. Round the answer to at least four decimal places. n=148 p=0.14 PC Which of the following contributes to the ability of the federal government to borrow vast sums?Like personal borrowing, age limits the federal government's ability to borrow.Higher interest rates make it easier to repay debt and this encourages more borrowing.Buyers of government debt typically cash-in their bonds when Treasury securities mature.Government debt is not backed by assets. A marketing dashboard is live view of the people and activities vital to the corporation. Select one: O True O False which of the following statements is TRUE about an insurer's right to screen applicants for HIV?A. An insurer can require a blood test for HIVB. An insurer can ask about sexual orientationC. An insurer can ask about risky sexual behaviorsD. an insurer can use an investigative consumer report to determine sexual orientation PART I : As Norman drives into his garage at night, a tiny stone becomes wedged between the treads in one of his tires. As he drives to work the next morning in his Toyota Corolla at a steady 35 mph, the distance of the stone from the pavement varies sinusoidally with the distance he travels, with the period being the circumference of his tire. Assume that his wheel has a radius of 12 inches and that at t = 0 , the stone is at the bottom.(a) Sketch a graph of the height of the stone, h, above the pavement, in inches, with respect to x, the distance the car travels down the road in inches. (Leave pi visible on your x-axis).(b) Determine the equation that most closely models the graph of h(x)from part (a).(c) How far will the car have traveled, in inches, when the stone is 9 inches from the pavement for the TENTH time?(d) If Norman drives precisely 3 miles from his house to work, how high is the stone from the pavement when he gets to work? Was it on its way up or down? How can you tell?(e) What kind of car does Norman drive?PART II: On the very next day, Norman goes to work again, this time in his equally fuel-efficient Toyota Camry. The Camry also has a stone wedged in its tires, which have a 12 inch radius as well. As he drives to work in his Camry at a predictable, steady, smooth, consistent 35 mph, the distance of the stone from the pavement varies sinusoidally with the time he spends driving to work with the period being the time it takes for the tire to make one complete revolution. When Norman begins this time, at t = 0 seconds, the stone is 3 inches above the pavement heading down.(a) Sketch a graph of the stones distance from the pavement h (t ), in inches, as a function of time t, in seconds. Show at least one cycle and at least one critical value less than zero.(b) Determine the equation that most closely models the graph of h(t) .(c) How much time has passed when the stone is 16 inches from the pavement going TOWARD the pavement for the EIGHTH time?(d) If Norman drives precisely 3 miles from his house to work, how high is the stone from the pavement when he gets to work? Was it on its way up or down?(e) If Norman is driving to work with his cat in the car, in what kind of car is Normans cat riding? A five-year bond, with a yield to maturity (YTM) of 11% (continuously compounded), pays an 8% coupon at the end of each year. The bond price is R86.80 and the duration is 4.256. What effect will an increase of 0.3% in the yield to maturity (YTM) have on the bond price? TRUE/FALSE. State whether each of the following statements is true or false. Justify your answer in each case. (a) NH3 contains no OH- ions, and yet its aqueous solutions are basic The D.E xy" + xy + (x - 1)y=0 has a general solution y(x) = C/(x) + CJ-1(x) Select one: O True O False iou E (Components of an annuity payment) You take out a 25-year mortgage for $370,000 to buy a new house. What will your monthly payments be if the interest rate on your mortgage is 6 percent? Use a spreadsheet to calculate your ansv calculate the portion of the 120th monthly payment that goes toward interest and principal. Use five decimal places for the monthly interest rate in your calculations. a. Using a spreadsheet to calculate your answer, your monthly payments will be $ (Round to the nearest cent.) Find The Values Of P For Which The Series Is Convergent. [infinity] N9(1 + N10)P N = 1 P -?- < > = Define economics. Discuss the political economic status of the ghetto as an internal colony. mrs. smith wants to be sure she teaches her class how to properly behave in a big city before they go on their own. to teach them how to cross an avenue as a group, she would______.