Answer:
Both of them
Explanation:
When creating a marketing plan you need to think of the objective or goals that you have, you should probably always have a running campaign to help the brand itself to be constantly seen by the audience, while at the same time having specific campaigns for the products that you want to push or to promote the most. For example, not all of Nike's ads are aimed to sell more sneakers or sports clothing, some of them are just to keep them on the conversation and growing their brand, while the hype up campaign for the release of a new pair of sneakers or collection is done at the same time. So you should always go for both.
Convert 103.69 kN to TN.
103/69 kN = 10.406 tons
A projectile is fired horizontally with an initial speed of 50.0 m/s. Neglect air resistance.a) What is the magnitude of the displacement of the projectile 3.00 s after it is fired?b) What is the speed of the projectile 3.00 s after it is fired?c) What is the magnitude of the acceleration of the projectile 3.00 s after it is fired?
Answer:
a) 156 meters
b) 58 m/s
c) 9.8 m/s^2
Explanation:
a) The horizontal displacement X = V *t
X = 50 * 3 = 150 meters
Vertical displacement = y = – g * t² / 2
Y = -9.8 *3*3/2 = -4.9*9 = 44.1
Net Displacement = Sqrt (X^2 +Y^2) = 156.34 = 156 meters
b) Speed of the projectile
vx = 50 m/s
vy = t*g = 9.8*3 = 29.4
V = Sqrt (vx^2 + vy^2) = 58 m/s
c) Acceleration is the acceleration due to gravity = 9.8 m/s^2
The magnitude of the displacement of the projectile is equal to 156 meters.
Given the following data:
Initial speed = 50.0 m/s. Time = 3.00 seconds.Scientific data:
Acceleration due to gravity (g) = [tex]9.8 m/s^2.[/tex]How to calculate the displacement.Mathematically, the magnitude of the displacement of a projectile is given by this formula:
[tex]Horizontal\;displacement = Vt\\\\Horizontal\;displacement = 50.0 \times 3.00[/tex]
Horizontal displacement = 150.0 meters.
[tex]Vertical displacement =\frac{1}{2} gt^2\\\\Vertical displacement =\frac{1}{2} \times 9.8 \times 3^2\\\\Vertical displacement =\frac{1}{2} \times 9.8 \times 9[/tex]
Vertical displacement = 44.1 meters.
[tex]D^2 = X^2 +Y^2\\\\D =\sqrt{44.1^2+150^2}[/tex]
D = 156.34 ≈ 156 meters.
b. For the speed of the projectile:
Vertical speed = tg
[tex]V_y = tg = 9.8\times3\\\\ V_y = 29.4\;m/s[/tex]
[tex]D^2 = V_x^2 +V_y^2\\\\D =\sqrt{50^2+29.4^2}[/tex]
D = 58 m/s.
c) The magnitude of the acceleration of the projectile is equal to the acceleration due to gravity ([tex]9.8 \;m/s^2[/tex]).
Read more on acceleration here: brainly.com/question/247283
SN1 reactions usually proceed with ________. A) equal amounts of inversion and retention at the center undergoing substitution B) slightly more inversion than retention at the center undergoing substitution C) slightly more retention then inversion at the center undergoing substitution D) complete inversion at the center undergoing substitution E) complete retention at the center undergoing substitution complete retention at the center undergoing substitution slightly more retention then inversion at the center undergoing substitution complete inversion at the center undergoing substitution equal amounts of inversion and retention at the center undergoing substitution slightly more inversion than retention at the center undergoing substitution
Answer:
equal amounts of inversion and retention at the center undergoing substitution
Explanation:
In an SN1 reaction, the rate determining step is the formation of a carbonation which is flat and planar.
This means that both faces of the carbo cation are equally available for attack by the nucleophile.
Attack on either of the faces may occur equally thereby yielding a racemic mixture.
______ are an idication that your vehicle may be developing a cooling system problem.
Answer:
The temperature gauge showing that the vehicle has been running warmer or has recently began to have issues from overheating is an idication that your vehicle may be developing a cooling system problem.
Explanation:
1.1.2
Energy
1.1.3
Mass
1.1.4
Temperature
Power
1.1.5
1.2 State Ohm's law
1.3 State Joule's law
1.5 Name four factors that9 determine the resistance of the material
1.6 What is the SI Unit for current?
QUESTION 2
Answer:
the energy is sgdrh35679
A crane is set up for steel erection at the site of a 5 story office building where each story is 15 feet tall. The new building will be 50 feet wide and 75 feet long and the crane is located 5 feet off the southwesterly corner of the building. Assuming that you need a 10 foot boom clearance over the last piece of steel.
Required:
Compute the minimum boom length
Answer:
127.58 ft
Explanation:
We need first to calculate the length from corner to corner of the story, L.
Since the length of each floor is 75 ft and its width 50 ft, and since each floor is a rectangle with diagonal, L, using Pythagoras' theorem, we have
L² = (75 ft)² + (50 ft)²
= 5625 ft² + 2500 ft²
L² = 8125 ft²
L = √(8125 ft²)
L = 90.14 ft
Since the crane is 5 ft off the southwesterly corner of the building, the working radius, R = L + 5 ft = 90.14 ft + 5 ft = 95.14 ft.(since the diagonal length of the floor plus the distance of the crane from the south westerly corner add to give the working radius)
The boom tip height, H = height of building h + clearance of boom, h'
h = height of each story, h" × number of stories, n
Since h" = 15 ft and n = 5
h = 15 ft × 5 = 75 ft
Also, h' = 10 ft
So, H = h + h'
H = 75 ft + 10 ft
H = 85 ft
So, the minimum boom length, L' = √(H² + R²)
substituting the values of the variables into the equation, we have
L' = √(H² + R²)
L' = √((85 ft)² + (95.14 ft)²)
L' = √(7225 ft² + 9051.6196 ft²)
L' = √(16276.6196 ft²)
L' = 127.58 ft
An air-conditioning system is used to maintain a house at 70^\circ{} ∘ F when the temperature outside is 100^\circ{} ∘ F. The house is gaining heat through the walls and the windows at a rate of 800 Btu/min, and the heat generation rate within the house from people, lights, and appliances amounts to 100 Btu/min. Determine the minimum power input required for this air-conditioning system. Answer: 1.20 hp
Answer:
the minimum power input required for this air-conditioning system is 1.20 hp
Explanation:
Given the data in the question;
Temperature inside ( Sink ) T[tex]_L[/tex] = 70°F = ( 70 + 460 )R = 530 R
temperature outside ( source )T[tex]_H[/tex] = 100°F = ( 100 + 460 )R = 560 R
[tex]Q_W[/tex] = 800 Btu/min
[tex]Q_L[/tex] = 100 Btu/min
Now, from the equation of coefficient of performance of refrigerator;
[tex]COP_{Ref[/tex] = Desired output / Required input
[tex]COP_{Ref[/tex] = [tex]Q_{out[/tex] / [tex]W_{net[/tex] --------- let this be equation 1
[tex]COP_{Ref[/tex] = ( [tex]Q_L + Q_W[/tex] ) / [tex]W_{net[/tex]
where [tex]Q_W[/tex] is the rate heat gained through the wall
[tex]Q_L[/tex] is the heat generation from people and lights and appliances.
Now, lets consider the equation coefficient of performance of refrigerator in terms of temperatures;
[tex]COP_{Ref[/tex] = [tex]T_L[/tex] / ( [tex]T_H[/tex] - [tex]T_L[/tex] )
we substitute
[tex]COP_{Ref[/tex] = 530 / ( 560 - 530 )
[tex]COP_{Ref[/tex] = 530 / 30
[tex]COP_{Ref[/tex] = 17.667
so we substitute into equation 1;
[tex]COP_{Ref[/tex] = [tex]Q_{out[/tex] / [tex]W_{net[/tex] ---------
[tex]COP_{Ref[/tex] = ( [tex]Q_L + Q_W[/tex] ) / [tex]W_{net[/tex]
17.667 = ( 100 + 800 ) / [tex]W_{net[/tex]
17.667 = 900 / [tex]W_{net[/tex]
[tex]W_{net[/tex] = 900 / 17.667
[tex]W_{net[/tex] = 50.94 Btu/min
[tex]W_{net[/tex] = ( 50.94 / 42.53 ) hp
[tex]W_{net[/tex] = 1.198 hp ≈ 1.20 hp
Therefore, the minimum power input required for this air-conditioning system is 1.20 hp
A fluid at 300 K flows through a long, thin-walled pipe of 0.2-m diameter. The pipe is enclosed in a concrete casing that is of square cross section (1 m x 1 m). The axis of the pipe is centered in the casing. The outer surfaces of the casing are maintained at 500 K. Calculate the heat loss per 1m length of the pipe. Please make sure to follow the rules required for all homework assignments.
Answer:
The correct answer is "1341.288 W/m".
Explanation:
Given that:
T₁ = 300 K
T₂ = 500 K
Diameter,
d = 0.2 m
Length,
l = 1 m
As we know,
The shape factor will be:
⇒ [tex]SF=\frac{2 \pi l}{ln[\frac{1.08 b }{d} ]}[/tex]
By putting the value, we get
⇒ [tex]=\frac{2 \pi l}{ln[\frac{1.08\times 1}{0.2} ]}[/tex]
⇒ [tex]=3.7258 \ l[/tex]
hence,
The heat loss will be:
⇒ [tex]Q=SF\times K(T_2-T_1)[/tex]
[tex]=3.7258\times 1\times 1.8\times (500-300)[/tex]
[tex]=3.7258\times 1.8\times (200)[/tex]
[tex]=1341.288 \ W/m[/tex]
The cost of hiring new employees outpaces the raises for established employees is
A.
Salary compression
B.
Occupational based pay
C.
Merit pay
D.
Need for Achievement
Answer:
do you have to make the right decisions to be a person who has been a member who is not the first time a great person who has a job in a day of his life or
For automobile engines, identify the best choice of motor oil.
A. High viscosity for Maine in the winter and low viscosity for Florida in the summer.
B. Low viscosity for Maine in the winter and low viscosity for Florida in the summer.
C. Low viscosity for Maine in the winter and high viscosity for Florida in the summer.
D. High viscosity for Maine in the winter and high viscosity for Florida in the summer.
E. It does not matter what the rating is for the motor oil.
Answer:
C. Low viscosity for Maine in the winter and high viscosity for Florida in the summer.
Explanation:
The choice of motor oil or engine oil depends on the type of engine and also on the type of climate on which the engine runs.
In winter climates, we should use oil with low viscosity as at lower temperatures, the it flows more readily if its viscosity is low.
But the summer season needs a relatively thicker oil so as to reduce the thinning effect of the oil out of the engine.
Thus for Maine in the winter season, we need a low viscosity oil and for Florida a high viscosity oil in the summer season.
Therefore, option (c) is correct.
I have 50 kVA delta-wye transformer with 3 single phases secondary (line-neutral) delivered to 3 houses, So if one of the 3 houses drown more power would that affect another 2 houses, or each phase can only handle certain amount of power separately?
Answer:
tie es que sumar restar y multiplicar
Explanation:
espero que sea así
Find the value of L
I= 1.52-30A
Vcoil
+
225LO V
50 HZ
sout I VE
O 0.441 H
0 0.33 Н
O 0.451 H
O 0.562 H
Answer:
the value is 356732 Volt
Build a 3-input XOR gate using a 3x8 decoder and an Or gate.please Quickly i have final
Answer:
Take a 3 to 8 decoder with active low outputs
Assuming you are familiar with the functioning of decoders,
The three inputs of decoder of course are the first, second and the carry bit which you feed to the subtractor.
Next we examine the truth table of the full subtractor i formatted in the picture.
Then write the minterms for the difference output and borrow output from the given truth table picture I have mentioned before!!
Explanation:
hopi it to help you!!
Find the dryness fraction, specific volume and internal energy of steam at 7bar nd enthalpy 2600kj/kh. (0.921,0.2515m³/kg , 2420kj/kg)
Answer:
hdwhifniuewohfoyyhyeiudhwbwuxvgusvfgcvxg
Explanation:
Question 3 (12 points)
A pump of 1200rpm rotational speed is connected to a delivery pipe (rising main) of 500m
length and 0.025 Darcy friction factor. The following plot shows the pump performance and the
rising main curve.
40
Reming main
25
нер
20
15
100
Eficency
50
Pump
ES
10
20
50
60
Q (L.)
I
Answer the following short questions
1) The flow rate delivered by the pump when connected to the rising main is
2) The total head delivered by the pump when connected to the rising main is
3) The static lift (Hs) is:
4) What is the power produced (output) and consumed (input) by the pump?
5) What is the diameter of the rising main!
6) What is the sort of this pump
so long so long so long so long so long
Explanation:
so long so long so long so long so long so long so long so long so long so long
"All data types are keywords but all keywords are not data types", justify this statement.
Keywords Are Reserved Words Which Are Not Use As Normal Cases But Used For Special Purpose In Our Program whereas, Data Type Tells The Compiler And Interpreter How The Program Is Going To Be Executed And Can Be Used At Every Cases.
Hope This Helps You ❤️Based on how they are stored in the computer, the types produced by these keywords can be categorized into two families, integer types and floating-point types.
What is the relation between data and keyword?Bit, byte, and word are terminology that can be used to refer to either memory or data storage units in computers.
The main distinction between text fields and keyword fields is that text fields are examined during indexing, whereas keyword fields are not.
This means that while keyword fields are indexed exactly as is, text fields are split down into their constituent phrases at indexing to allow for partial matching.
A word or collection of words that an Internet user enters into a search engine or search bar to conduct a search is referred to as a keyword in the context of digital marketing.
Therefore, All data types are keywords, but all keywords are not data types.
Learn more about data and keywords here:
https://brainly.com/question/9588905
#SPJ2
(1) Estimate the specific volume in cm3 /g for carbon dioxide at 310 K and (a) 8 bar (b) 75 bar by the virial equation and compare to the experimental values of 70.58 and 3.90, respectively.
(2) Estimate the specific volume in cm3/g for carbon dioxide at 310 K and (a) 8 bar (b) 75 bar by the compressibility factor charts and compare to the experimental values2 of 70.58 and 3.90, respectively.
Answer:
70.66 cm^3
The specific volume for P = 70.66 is within 1% of the experimental value while the viral equation will be inaccurate when the second viral coefficient is used )
Explanation:
Viral equation : Z = 1 + Bp + Cp^2 + Dp^3 + -----
Viral equation can also be rewritten as :
Z = 1 + B ( P/RT )
B ( function of time )
Temperature = 310 K
P1 = 8 bar
P2 = 75 bar
Determine the specific volume in cm^3
V = 70.66 cm^3
b) comparing the specific volumes to the experimental values
70.58 and 3.90
The specific volume for P = 70.66 is within 1% of the experimental value while the viral equation will be inaccurate when the second viral coefficient is used )
attached below is the detailed solution
Two steel plates are to be held together by means of 16-mm-diameter high-strength steel bolts fitting snugly inside cylindrical brass spacers. Knowing that the average normal stress must not exceed 210 MPa in the bolts and 145 MPa in the spacers, determine the outer diameter of the spacers that yields the most economical and safe design.
Answer:
The outer diameter of the spacers that yields the most economical and safe design is 25.03 mm
Explanation:
For steel bolt
Stress = 210 MPa or 210 N/mm2
Pressure = Stress* Area
Pbolt = 210 N/mm2 * 16^2 *(pi)/4
Pbolt = 210 N/mm2 * 200.96 mm^2 = 42201.6 N
For Brass spacer
Pressure = 42201.6 N
Area of Brass spacer = Pressure/Stress
Area of Brass spacer = 42201.6 N/145 N/mm^2 = 291.044 mm^2
Area of Brass spacer = (pi) (d^2 - 16^2)/4 = 291.044 mm^2
d^2 - 16^2 = 291.044 mm^2* 4/(pi) = 370.758
d^2 = 370.758 + 16^2
d^2 = 626.758
d = 25.03 mm
The outer diameter of the spacers that yields the most economical and safe design is 25.03 mm
Mr. Ray deposited $200,000 in the Old and Third National Bank. If the bank pays 8% interest, how much will he have in the account at the end of 10 years?
Answer:
2,160,000
Explanation:
8/100 × 200000/1 = 8/1 × 2000/1
2000 × 8 = 16,000 = interest
200,000 + 16,000 = 216,000
216,000 × 10 = 2,160,000 = amount in bank account
what is the difference between a series circuit and a parallel circuit?
Answer:
In a parallel circuit, the voltage across each of the components is the same, and the total current is the sum of the currents flowing through each component. ... In a series circuit, every device must function for the circuit to be complete. If one bulb burns out in a series circuit, the entire circuit is broken.
Explanation:
explain the term electric current as used in engineering principles
Answer:
Electric current is the movement of electrons through a wire. Electric current is measured in amperes (amps) and refers to the number of charges that move through the wire per second. If we want current to flow directly from one point to another, we should use a wire that has as little resistance as possible.Current is directly proportional to voltage, inversely proportional to resistance. One of the most common electrical measurements you'll use is the watt, a unit of electrical power: W (Watts) = E (Volts) x I (Amperes). The quantity of electric charge is measured in coulombs.They can even pass through bones and teeth. This makes gamma rays very dangerous. They can destroy living cells, produce gene mutations, and cause cancer.
Explanation:
hey mate this is the best answer if you're studying engineering!
Some_____
include peanut butter, bacon, and chocolate.
Snap traps baits
Glue boards
Catchalls
IGRs
Bait stations
Answer:
it’s IGS
Explanation:
because i read
Answer:
snap trap baits
Explanation: its kind of obvi, but i took the test and got it right.
Both a gage and a manometer are attached to a gas tank to measure its pressure. If the reading on the pressure gage is 65 kPa, determine the distance between the two fluid levels of the manometer if the fluid is
Answer:
The answer is below
Explanation:
Both a gage and a manometer are attached to a gas tank to measure its pressure. If the reading on the pressure gage is 65 kPa, determine the distance between the two fluid levels of the manometer if the fluid is a) mercury b) water
Solution:
A manometer is a device used to measure pressure. A manometer is made up of a U shaped tube containing liquid. The difference of pressure in the two arms causes the liquid to reach different heights.
a) The density of mercury ([tex]\rho_{Hg}[/tex]) = 13600 kg/m³, Pressure (P) = 65 kPa and g = 9.8 m/s², h = distance between the two fluid levels
[tex]P=\rho_{Hg}*g*h\\\\h=\frac{P}{\rho_{Hg}*g} =\frac{65*10^3\ Pa}{13600*9.81}=0.487\ m[/tex]
b) For water, [tex]\rho_w[/tex] = 1000 kg/m³, hence:
[tex]P=\rho_{w}*g*h\\\\h=\frac{P}{\rho_{w}*g} =\frac{65*10^3\ Pa}{1000*9.81}=6.6\ m[/tex]
Question 4. Select the statement that best describes the PM wave. a. Carrier phase angle changes represent the PM modulated signal, however, unlike FM and AM modulated carriers, it is not always easy to see these phase changes in the plot. b. The FM signal accurately represents the message. c. Although PM and FM techniques are classified as angular modulation techniques, they cannot be used interchangeably (i.e., modulated with FM and demodulated with PM, and visa versa). d. All statements are correct.
Answer:
c. Although PM and FM techniques are classified as angular modulation techniques, they cannot be used interchangeably i.e., modulated with FM and demodulated with PM, and vice versa.
Explanation:
Phase modulation is modulation pattern for conditioning communication signals for transmission. PM signals appears to change frequency with message wave. Both PM and FM are angular modulation techniques. The message in PM wave is captured in phase changes.
Please help!!!!! Thank u
Answer:
which class is this. I don't know sry
The data shows that recently the size of the raccoon population decreased. How will the decrease in the raccoon population affect the other populations?
Answer: Increase in the population of lower organisms.
Explanation: Raccoons are mesopredators found in the middle levels of food webs and have critical impacts on the dynamics of many other species. Thus, they greatly contribute to the functioning of the ecosystem.
They are naturally equipped to checkmate the population size of other organism that are below them (i.e., their preys) in the food web. They are; predators, pathogen carriers (such as rabies), and competitors, as they compete with some specialist in the food web.
Hence, the decrease in the population of raccoons will lead to the increase in the population size of lower organisms they prey on in the food web or chain.
What is the purpose of using state space representation?
Answer:
In control engineering, a state-space representation is a mathematical model of a physical system as a set of input, output and state variables related by first-order differential equations or difference equations.
Explanation:
A 5 MHz clock that generates a 0 to 5V pulse train with a 30% duty cycle is connected to input X of a two input OR gate that has a 20nS propagation delay. The clock also goes to an inverter with a 10ns propagation delay. The output of the inverter goes to the Y input of the OR gate.
a. Draw the circuit
b. Plot the output of the clock for two cycles. Show times and voltages.
c. Plot the output of the inverter in the same plot. Show times and voltages.
d. Plot the output of the OR gate in the same plot. Show times and voltages.
Answer:
Timing Diagrams 15 pts. A 10 MHz clock that generates a 0 to 5V pulse train with a 30% duty cycle is connected to input X of a two input OR gate that has a 20nS propagation delay. The clock also goes to an inverter with a 10 ns propagation delay. The output of the inverter goes to the Y input of the OR gate. a) Draw the circuit. 2 pts. b) Plot the output of the clock for two cycles. Show times and voltages. 5 pts. c) On the same page as part (b) plot the output of the inverter. Show times and voltages. 3 pts. d) On the same page as parts (b & c) plot the output of the OR gate. Show times and voltages. 5 pts.
affect the amount and rate the alcohol reaches the
bloodstream.
Answer:
Answer to the following question is as follows;
Explanation:
The amount of alcohol consumption can be influenced by a variety of things, including food.
The proportion and pace at which alcohol reaches the circulation is affected by drinking rate, body mass, and the size of the beverage. Alcohol enters your system as soon as it reaches that first sip, as per the National Institute on Drug Abuse and Alcoholism. After 10 minutes, the results are noticeable.
Your new team is working hard, but they are all less experienced than you and don't complete their tasks as quickly.What would you be most and least likely to do? (A). Reach out to your manager to discuss the situation.Try to identify the best way to support the new associates. (B).Remind your coworkers of performance expectations and that they need to be working harder to complete tasks. (C). Offer to help others complete their tasks; observe their work process and provide some tips that might help them. (D). Give your coworkers more time to figure out how to do the task; they likely just need more practice with what they've already learned.
