Answer:
remote
Explanation:
i hope it helps
What volume of solution is required to produce a 7.8M solution containing 23.6g of LiBr?
Answer:
34.9 mL
Explanation:
First we convert 23.6 g of LiBr into moles, using its molar mass (86.845 g/mol):
23.6 g ÷ 86.845 g/mol = 0.272 mol LiBrNow we can calculate the required volume, using the definition of molarity:
Molarity = moles / litersliters = moles / Molarity0.272 mol / 7.8 M = 0.0349 LWe can convert L into mL:
0.0348 L * 1000 = 34.9 mLSome vitamins and dietary supplements are stored in opaque, darkened
bottles to protect them from UV light because UV light would cause a
reaction. Which word could be used to describe UV light in this situation?
O A. Catalyst
B. Enzyme
C. Solvent
D. Reactant
The correct option for the given question about Harmfull effect of UV light is Option D) Reactant.
Why UV light is so harmfull for some vitamins?In general, temperature, oxygen, and light impacts on vitamins and minerals are sensitive. A nutrient can lose its biological potency if its molecular structure is slightly altered.Numerous vitamins, including vitamin A, vitamin B2 (riboflavin), vitamin B6, vitamin B12, and folic acid, are known to be particularly susceptible to UV radiation oxidation.Additionally, light speeds up the negative interactions between vitamins.For instance, the combination of riboflavin and light together speeds up the breakdown of both folic acid and vitamin C. This is what causes milk that has been exposed to light to lose vitamin C.Thus to conclude we can say that UV light damages some vitamins by reacting with them.
Learn more about Harmfull effect of UV light here:
https://brainly.com/question/11126315
#SPJ2
If you have a cup of water at 35 degrees Celsius, and a bath tub of water at 35 degrees Celsius which will melt the most ice and why?
Two reactant particles collide with proper orientation. The collision will be effective if the particles have
(A) sufficient potential energy
(B) high activation energy
(C) high ionization energy
(D) sufficient kinetic energy
And explain why, and answer in brainly
The collision will be effective if the particles have sufficient kinetic energy (Option D).
Kinetic energy is motion energy, conversely to potential energy.Kinetic energy is required to produce the collision between particles.The more kinetic energy the particles have, then the more collision will occur, thereby it increases the rate of a chemical reaction.In conclusion, the collision will be effective if the particles have sufficient kinetic energy (Option D).
Learn more in:
https://brainly.com/question/25959744
Zach invited his friend Sydney to a pool party over the weekend. Sydney informed Zach that the climate was supposed to be rainy over the weekend and suggested that he change his plans. Zach explained to Sydney that she had misused the word “climate” and she should have used the word “weather” instead. Which of the following statements accurately clarifies the confusion between Zach and Sydney?
A). Zach is correct; the weather for this area is typically tropical and wet.
B). Sydney is correct; there has been an abundance of rainfall within the last month, changing the climate of this particular area.
C). Zach is correct; the climate of an environment is determined by patterns in weather conditions over an extended period of time.
D). Sydney is correct; the climate of an environment can change constantly based on weather, wind, and front patterns in the area.
Answer:
C
Explanation:
Common sense
What is the volume, in liters, of 2.75 grams of fluorine gas at 35.0°C and 4.55 atm pressure?
The volume (in litres) of 2.75 g of fluorine gas at 35 °C and 4.55 atm is 0.402 L
How to determine the mole of fluorine gasMass of F₂ = 2.75 gMolar mass of F₂ = 2 × 19 = 38 g/mol Mole of F₂ =?
Mole = mass / molar mass
Mole of F₂ = 2.75 / 38
Mole of F₂ = 0.0724 mole
How to determine the volume Temperature (T) = 35 °C = 35 + 273 = 308 KPressure (P) = 4.55 atmGas constant (R) = 0.0821 atm.L/Kmol Number of mole (n) = 0.0724 moleVolume (V) =?Using the ideal gas equation, the volume of the gas can be obtained as follow:
PV = nRT
Divide both side by P
V = nRT / P
V = ( 0.0724 × 0.0821 × 308) / 4.55
V = 0.402 L
Learn more about ideal gas equation:
https://brainly.com/question/4147359
PLEASE HELP!!!!! 10 POINTS!!
What electron could have quantum numbers n=3, l=0, ml=0, ms=-1/2
Answer:
Explanation:
It is a 3s electron
TRUE OR FALSE
All of the elements on Earth, except for hydrogen, were formed in the interiors of stars.
Answer:
True
Explanation:
I checked several websites to double check for you.
Answer:
Except for hydrogen and some helium created in the Big Bang, all of the stuff we, and the Earth around us, are made of, was generated in stars, through sustained fusion or in supernova explosions i thank its true :) hope this helps
How do you name branched-chain alkanes?
Answer:
Explanation:
Branches or side chains are called alkyl radicals, they are named substituting the termination -ano for -yl or -il when it is part of a hydrocarbon.
2
In the movie, Tim says that Saturn's rings refract light to
produce colors. What does this mean?
A They emit light
B They bend and reflect light
CThey absorb all light
D They block light
Answer:
It would be B they bend to reflect light
A piece of metal is composed of atoms. Each atom in the metal contains 29 protons. How is the metal classified?
Answer:
Explanation:
The metal is classified as a transition metal or transition element. In particular, this atom is Copper it has an atomic number of 29 which we know by the number of protons. The number of protons in an atom is the same as the atomic number.
Answer:
Copper
Explanation:
Each atom in the metal contains 29 protons.
The student wants to test the conductivity of each solution. Prior to carrying out the investigation, the student needs to identify the variables being controlled and the variables being changed between the two solutions. Which identification of the variables is correct?
Options:
The volume of the solution and the concentration of the solution are being changed between the two solutions, but the number of solute particles is being held constant.
The number of solute particles and the concentration of the solution are being changed between the two solutions, but the volume is being held constant.
The number of solute particles is being changed between the two solutions, but the volume and concentration of the solution is being held constant.
The volume of the solution and the number of solute particles are being changed between the two solutions, but the concentration of the solution is being held constant.
Answer:b
Explanation: the particles will soon dissolve which means that the particles are changing but the volume is staying the same and the concentration is changing
The identification of the variables which is correct is that the number of solute particles is being changed between the two solutions, but the volume and concentration of the solution is being held constant.
What are variables?Variables are defined as any characteristics, number or quantity which can be measured . It can also be called as a data item . It is called as variable because they can vary and can have variety of values.
There are three types of variables 1) manipulated variable where in a condition is specified, 2) responding variable which is dependent on manipulated variable 3)controlled variable which do not change.
Example of manipulated variables are number of hours spent by a student studying , that of responding variable is result of a student and temperature is an example of controlled variable.
Learn more about variables,here:
https://brainly.com/question/17344045
#SPJ3
How many atoms of carbon are in diamond
Answer:
A diamond contains 5.0 x 10 21 atoms of carbon.
What does the speaker in the poem mean by the phrase "my heart leaps up"?
A.
He is having a heart attack.
B.
He is exercising.
C.
He feels excited and happy.
D.
His heart continues to beat.
Answer:
C. He feels excited and happy
Explanation:
In any engineering design problem, the first step is to understand the problem and identify one or more possible solutions. In this task, you’ll analyze the problems you face as the chemical engineer challenged with setting up the ammonia-making process. Recall the chemical equation for producing ammonia:
N2 + 3H2 ⇌ 2NH3 + energy
2.How can you change the chemical equilibrium to benefit the company? What benefits will be realized?
Answer:
Explanation:
2NH3(g)(→ N2(g)(+(3H2(g)
Eventually, these two reactions occur at the same rate. When this happens,
the concentrations of nitrogen, hydrogen, and ammonia become constant, and the
system is said to be “at equilibrium”. Typically,
we represent chemical equilibrium
using a double-headed reaction arrow:
What is happening when an oxygen molecule is formed from two separate oxygen atoms?
Calculate the volume which 1.00 mole of a gas occupies at 1 atm and 298K?
Answer:
25.45 Liters
Explanation:
Using Ideal Gas Law PV = nRT => V = nRT/P
V = (1mole)(0.08206Latm/molK)(298K)/(1atm) = 25.45 Liters
I know the answer out here are points for you! It’s 3 if anyone needs the answer !
Answer:
lol thanks for the 10
Explanation:
How many atoms does 9.3 moles of Mo represent?
Answer:
5.60 × 10²⁴ Mo atomsExplanation:
The number of atoms can be found by using the formula
N = n × Lwhere n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
We have
N = 9.3 × 6.02 × 10²³
We have the final answer as
5.60 × 10²⁴ Mo atomsHope this helps you
Which of the following is not a force
A. Weight
B. Friction
C. Acceleration
D. Air resistance
Answer:
Acceleration
Explanation:
Acceleration doesn't change one moment to the next, and therefore, doesn't count as a force.
The answer option which is not a force is: C. Acceleration.
What is a force?A force can be defined as a push or pull of an object or physical body, which typically results in a change of motion (acceleration), especially due to the interaction of the object with another.
The examples of a force.In Science, the three (3) most common examples of a force include the following:
WeightFrictionAir resistanceIn conclusion, acceleration is not an example of a force but a change in the rate of velocity of an object with respect to time.
Read more on force here: brainly.com/question/1121817
Evidence of Earth’s plate tectonic activity is most obvious after an earthquake. Which explanation best describes this plate tectonic movement?
A: Earth’s plates stress one another. However, when an earthquake occurs, plate movement is due to an unbalanced force on the plates.
B: Earth’s plates are moving fast. However, the force of friction slows their movement.
C: The force of gravity causes the floating plates to move up and down. The plate movement sometimes results in earthquakes.
D: Earth’s plates continually place stress on one another. However, the force is balanced during an earthquake.
Answer:a
Explanation:bc
Plates on Earth are moving quickly. Yet, friction causes them to travel more slowly. So, the correct options are B and C.
What are tectonic plates?Tectonic plates are enormous fragments of the upper mantle and crust of the Earth. They are composed of both continental and oceanic crust. Earthquakes occur around mid-ocean ridges and the large faults which mark the edges of the plates.
The Earth's plates are shifting swiftly. Nevertheless, friction slows their movement. Gravity causes the floating plates to rise and fall. On occasion, the movement of tectonic plates results in earthquakes.
When compared to the Earth's mantle, the plates behave like solid, unyielding shells. The lithosphere is the name given to this thick outer layer.
Thus, the correct options are B and C.
Learn more about Tectonic plates, here:
https://brainly.com/question/30805154
#SPJ3
If 12 moles of Al2O3
are produced, how many moles of aluminum reacted?
Answer:
if 12 moles are produced then it came 24 moles of Al(OH)3
Explanation:
The number that is written in front of the molecule is called stoichiometry, represents the number of mole of that molecule. 12 moles of [tex]Al_{2}O__{3}[/tex] is produced by 24 mole of Aluminum.
What is stoichiometry?Stoichiometry is a part of chemistry that help us in making relationship between reactant and product from quantitative aspects. It tells about how much part of reactant will be required to produce particular product. Unitary method is always applied in case of stoichiometry chemistry.
The balanced equation is
[tex]4Al+3O_{2}\rightarrow 2Al_{2}O__{3}[/tex]
The mole ratio between [tex]Al_{2}O__{3}[/tex] and Al is 2:4, means to produce 4 moles of [tex]Al_{2}O__{3}[/tex] we need 2 moles of Aluminum
4 mole of [tex]Al_{2}O__{3}[/tex]= 2 moles of Aluminum
1 mole of [tex]Al_{2}O__{3}[/tex]=(1÷2) moles of Aluminum
12 moles of [tex]Al_{2}O__{3}[/tex]= 24 mole of Aluminum
Therefore 12 moles of [tex]Al_{2}O__{3}[/tex] is produced by 24 mole of Aluminum.
To learn more about stoichiometry, here:
https://brainly.com/question/28780091
#SPJ2
If the prescribed dosage of milk of magnesia Mg(OH)2 is 3.5 moles, how many grams
would you need to take? Round to the nearest tenth (one digit after the decimal).
A. 92.1 g
B. 204.2g
C. 157.2 g
D. None of the above
Answer:
B
Explanation:
1 mole is equal to 58.31968 grams.
so 3.5 moles equal to answer choice B
______ is the tendency of an organism to maintain a constant and stable internal environment
Answer:
Homeostasis is the answer
Explanation: it maintains a constant and stable environment
Using the periodic table, determine the number of PROTONS for the element Li
I have 130 L of gas in a piston at a temperature of 250°C. If I cool the gas
until the volume decreases to 85 L, what will the temperature of the gas be?
This is a Charles' Law problem: V1/T1 = V2/T2. As the temperature of a fixed mass of gas decreases at a constant pressure, the volume of the gas should also decrease proportionally. Here, we are given the new volume of the gas after cooling, and we want to determine to what temperature the gas was cooled.
To use Charles' Law, the temperature must be in Kelvin (x °C = x + 273.15 K). We want to solve Charles' Law for T2, which we can obtain by rearranging the equation into T2 = V2T1/V1. Given V1 = 130 L, T1 = 250 °C (523.15 K), and V2 = 85 L:
T2 = (85 L)(523.15 K)/(130 L) = 342 K or 68.9 °C. If sig figs are to be considered, since all the values in the question are given to two sig figs, the answer to two sig figs would be either 340 K or 69 °C.
Gases show great uniformity in their behaviour irrespective of their nature. The concept Charles's law is used here to determine the new temperature of the gas. The new temperature of the gas is 341.96 K.
What is Charles's law?At constant pressure, the volume of a given mass of gas is directly proportional to the temperature on Kelvin scale. The absolute scale of temperature is introduced by the scientist Charles. The temperature at which gases supposed to have zero volume is called the absolute temperature.
Mathematically the Charles's law can be expressed as:
V = constant × T
V / T = constant
For two different gases, the equation is:
V₁ / T₁ = V₂ / T₂
T₂ = V₂T₁ / V₁
85 × 523 / 130 = 341.96 K
Thus the new temperature of the gas is 341.96 K.
To know more about Charles's law, visit;
https://brainly.com/question/16927784
#SPJ2
Please someone help me and all of the terms do not have to eh used
Answer:
The correct answer is -
1. D. mold
2. A. Cast
3. F. trace fossil
4. C. original material fossils
5. B. fossil record.
Explanation:
Mold is the impression of an organism in a rock that occurs due to the complete dissolving of the organism and only an impression left in sedimentary rocks.
The cast is a fossil copy of an organism in a rock that takes place when water-containing minerals fill the molds and creates a three-dimension copy of the fossil.
Trace fossils are the fossils that are preserved in such a manner that records of biological activity stored only instead of remains of plants or animals.
Storing originals animals or parts of the remaining such as tissue of an organism in natural form is known as original-material fossils.
Fossil records are the fossils ever found or discovered on the earth.
How many planets did early astronomers know about?
Answer:
5 Plants
Explanation:
Also can i have Brainlist
What is the role of the green substance chlorophyll in photosynthesis? (2 points)
Chlorophyll collects water from the ground.
Chlorophyll captures energy from the sun.
Chlorophyll captures carbon dioxide from the air.
Chlorophyll moves water up the stem to the leaves.
Answer:
captures energy from the sun
Explanation:
Answer:
☁️Chlorophyll captures energy from the sun. ☁️
Why do you think we use heat to dissolve sodium tetraborate?
Answer:
Explanation:90% of people marry there 7th grade love. since u have read this, u will be told good news tonight. if u don't pass this on nine comments your worst week starts now this isn't fake. apparently if u copy and paste this on ten comments in the next ten minutes you will have the best day of your life tomorrow. you will either get kissed or asked out in the next 53 minutes someone will say i love u this is irrelevent but idrc lol
