Answer:
Iodine is a non-metal, but it is lustrous (lustrous is the property of metal) in nature.
WILL AWARD BRAINLIEST! I NEED HELP PLEASE! Match the states of matter for each of the five lines below.
Answer:
see explanations
Explanation:
The graphic is the heating curve for water. Note that it is divided into 5 distinct heat flow segments. The segments with changing slopes are single phase segments with changes in temperature values. From left to right segment A is solid ice being warmed to it's melting point. Segment B is the melting segment in which 2 phases are in contact (solid + liquid). Note that addition of heat does not change the temperature. Segment C is warming of the liquid (single phase) up to its boiling point. At the boiling point the liquid begins to pass into the gas phase and again 2 phases are in contact; i.e., liquid & gas. Note again when two phases are in contact no temperature change occurs. Finally, segment E is the heating of the pure, single phase gas.
In summary ...
Segment A => heating single phase (solid) ice up to melting pt.
Segment B => melting of ice => 2 phases in contact (s & l) ΔT = ∅.
Segment C => heating single phase (liquid) water up to boiling pt.
Segment D => boiling of liquid => 2 phases in contact (l & g). ΔT = ∅.
Segment E => heating single phase (steam) up to desired temperature.
For what it's worth, the equation for the segments that show increasing temperature values is q = mcΔT (m= mass, c = specific heat & ΔT temp change.
The segments with zero slopes (horizontal lines) are defined by equations q = m·ΔHₓ where m = mass & ΔHₓ = heat of fusion (a constant = 335 j/g). The same is true for the line at 100°C where q = m·ΔH(v) where m = mass & ΔH(v) is the heat of vaporization (a constant = 2259 j/g.
Calculations involve calculating the amount heat transfer for each segment individually and then adding the heat values to obtain the total heat transfer.
If you need more instruction on this topic, kick back a note and I'll try to help clarify. Good Luck, Doc :-)
Answer:
Picture attached has answers
Explanation:
Electrophilic substitution occurs
Answer:
I hope it's helpful for you....
Explanation:
Electrophilic substitution reactions are chemical reactions in which an electrophile displaces a functional group in a compound, which is typically, but not always, a hydrogen atom.
What is the pressure inside a container of 3 moles of gas with a volume of 60 Liters at a temperature of 400 K?
I just need the answer not a link please :)
What is the reducing agent in the following reaction?
2 Br−(aq) + H2O2(aq) + 2 H+(aq) → Br2(aq) + 2 H2O(l)
Answer:
the reducing agent is Bromine
The oxidation state of an element is calculated by subtracting and the total sum of oxidation states of all the individual atom (excluding the one that has to be calculated) from total charge on the molecule. Bromine is the reducing agent in the following reaction.
What is oxidation state?Oxidation state of an element is a number that is assigned to an element in a molecule that represents the number of electron gained or lost during the formation of that molecule or compound.
The ionic equation is given as
2 Br⁻(aq) + H[tex]_2[/tex]O[tex]_2[/tex](aq) + 2 H⁺(aq) → Br[tex]_2[/tex](aq) + 2 H[tex]_2[/tex]O(l)
The oxidation state of bromine on reactant side is -1 while on product side it is 0 so, oxidation state of bromine has increased by 1 so, bromine is oxidized. If it is oxidized that means it must have reduced someone. So, bromine is acting as a reducing agent.
Therefore, bromine is the reducing agent in the given reaction.
To learn more about Oxidation state, here:
https://brainly.com/question/11313964
#SPJ2
how is the periodic table important for all of science and not just chemistry? pleas answer me
Answer:
The periodic table has been there for such a long time and how it is helpful in all science it is the element itself. How the element is used in real life. For example, oxygen is used in the atmosphere. Plants use carbon in order to covert it into oxygen more like that
A 50.0 mL sample of an aqueous H2SO4 solution is titrated with a 0.375 M NaOH solution. The equivalence point is reached with 62.5 mL of the base. The concentration of H2SO4 is ________ M. A 50.0 mL sample of an aqueous H2SO4 solution is titrated with a 0.375 M NaOH solution. The equivalence point is reached with 62.5 mL of the base. The concentration of H2SO4 is ________ M. 0.150 0.234 0.300 0.469 0.938
Answer: The concentration of [tex]H_2SO_4[/tex] is 0.234 M
Explanation:
According to the neutralization law,
[tex]n_1M_1V_1=n_2M_2V_2[/tex]
where,
[tex]n_1[/tex] = basicity [tex]H_2SO_4[/tex] = 2
[tex]M_1[/tex] = molarity of [tex]H_2SO_4[/tex] solution = ?
[tex]V_1[/tex] = volume of [tex]H_2SO_4[/tex] solution = 50.0 ml
[tex]n_2[/tex] = acidity of [tex]NaOH[/tex] = 1
[tex]M_1[/tex] = molarity of [tex]NaOH[/tex] solution = 0.375 M
[tex]V_1[/tex] = volume of [tex]NaOH[/tex] solution = 62.5 ml
Putting in the values we get:
[tex]2\times M_1\times 50.0=1\times 0.375\times 62.5[/tex]
[tex]M_1=0.234M[/tex]
Therefore concentration of [tex]H_2SO_4[/tex] is 0.234 M
Explain in detail how low density polyethylene is made
Answer:
Low-density polyethylene is manufactured by the process of the polymerization of ethylene at very high temperatures in a tubular reactor. In this tubular reactor, high-pressure polymerization allows further copolymerization of ethylene with polar co-monomers. The tubular process has an advantage over autoclave process.
Explanation:
please mark brainliest
What physical property of matter determines the earth ?
Answer:
Density is a physical property that is determined by dividing the mass of a given amount of a substance by its volume.
Explanation:
3.88g of NaOH is required to neutralize a spill of hydrochloric acid. A 0.516M solution of NaOH is available for use.
A. Determine the number of moles needed to complete the reaction.
B. What volume of NaOH solution is needed for this reaction?
C. What volume of a stock 1,15M solution would be used to make the solution used in the reaction?
Answer:
ftb
Explanation:
1.
Why are kilometers not a good unit of measurement in space?
T.
2.
What distance measurement unit is used for objects within our solar system?
astronomical
units
3.
How many kilometers are in one astronomical unit?
4.
What distance measurement unit is used for objects outside of our solar
system?
_light
year!
5.
How many kilometers are in one light-year? I
How far away is the nearest star to Earth other than our Sun?
6.
7.
How far away is the center of the Milky Way Galaxy from Earth?
8.
What is the diameter of the Milky Way Galaxy?
A coffee cup calorimeter will not be used to
directly measure the enthalpy of magnesium
combustion because
✓ the coffee cups could melt.
The calorimeter is made of coffee cups instead of
a beaker because coffee cups are
✓ better insulators
than beakers.
You will not measure the enthalpy of the reaction
of
✓ H2 and 02
in the coffee cup calorimeter because this reaction involves gases
Instead, you will use a well-known published
value.
These are the correct answers on edge 2021
Answer:
Ingles porfavor
Explanation:
The calorimeter is used to measure the heat of the system. The enthalpy of the combustion of magnesium cannot be measured by the calorimeter as it could melt the cup.
What is a coffee cup calorimeter?A coffee cup calorimeter is a styrofoam cup that contains partially filled water and is dipped with a thermometer. The reaction occurs in the water of the cup and hence differs from the bomb calorimeter.
The enthalpy of combustion is rigorous which can dissolve the polystyrene cup and hence is not used. They are better insulators than a beaker. The coffee cup calorimeter is not used to measure the enthalpy of hydrogen and oxygen as they involve gases that can escape the cup.
Learn more about coffee cup calorimeter here:
https://brainly.com/question/4390364
#SPJ2
A compound with an approximate molar mass of
65.0g/mol is made up of C, H and Cl. This same
Compound contains 55% of Cl by mass .lf 9g
of the compound contains 4.19 x 10²³ atoms,
determine the compound's:
a empirical formular and molecular formular
A mixture of NO2 and N2O4 gas is at equilibrium in a closed container. These gases react with the equation 2NO2 ⇌ N2O4. What will happen if the size of the container is increased?
Answer:
Equilibrium will shift leftwards towards NO2.
Explanation:
Hello there!
In this case, according to the Le Cha telier's principle, it is possible to realize that the increase of the volume turns out in the shift towards the most of the gaseous moles are in; in such a way, for the given chemical reaction, we can notice how NO2 (reactant side) has the most of the moles (2 moles in comparison to 1 mole of N2O4); and therefore, by increasing the volume, the equilibrium will shift to it, it means leftwards.
Best regards!
3.
The color of the powdered form of a mineral is called
O fracture
O cleavage
O luster
O streak
Answer:
D. Streak.
Explanation:
A mineral, in simple terms, can be defined as a solid inorganic substance that occurs in a pure form with a specific crystal structure. A mineral is identified based on its physical properties which include luster, color, streak, crystal shape, etc.
The color of the powdered form of a mineral is called a streak. A streak is a useful property in distinguishing sulfide and oxide minerals. To check the color of a mineral, it is rubbed against the surface of a ceramic streak plate or a piece of unglazed ceramic. In its finely powdered form, a mineral is easy to identify.
Therefore, option D is correct.
What is the air pressure on top of the mountain?
Explanation:
At sea level, the atmospheric pressure would be a little over 100 kPa (one atmosphere or 760 mm Hg). If we climb to the top of Mount Everest (the highest mountain in the world at 29,029 feet or 8848 meters), the atmospheric pressure will drop to slightly over 30 kPa (about 0.30 atmospheres or 228 mm Hg).
Hope it is helpful for you
Describe two realistic demands protestors could bring forward in their peaceful protest so that they dont face the same situation in future
Answer:
I do not know the Answer I'm just trying to get my point
Explanation:
Thank You
The two realistic demands protestors could bring forward in their peaceful protest include:
Adequate securityProvision of social amenities.Who is a Protester?Thus it is referred to an individual which publicly demonstrates opposition to something.One of the roles of the government is to protect lives and properties.
Making realistic demands during a peaceful protest is looked into in most cases.
Read more about Protester here https://brainly.com/question/11505871
A student prepares a aqueous solution of butanoic acid . Calculate the fraction of butanoic acid that is in the dissociated form in his solution. Express your answer as a percentage. You will probably find some useful data in the ALEKS Data resource.
Answer:
15.4%
Explanation:
If Ka = 0.54 mM = 1.51x10⁻⁵
Then;
C₄H₈O₂ --------> C₄H₇O₂⁻ + H⁺
I 0.54x10⁻³ 0 0
E 0.54x10⁻³(1-x) 0.54x10⁻³x 0.54x10⁻³x
Recall that x is the percentage degree of dissociation
From the ICE table;
Ka = [C₄H₇O₂⁻] [ H⁺]/[C₄H₈O₂]
1.51x10⁻⁵=(0.54x10⁻³x) (0.54x10⁻³x)/ 0.54x10⁻³(1-x)
1.51x10⁻⁵ = 0.54x10⁻³x^2/1-x
1.51x10⁻⁵(1-x) = 0.54x10⁻³x^2
1.51x10⁻⁵ - 1.51x10⁻⁵x = 0.54x10⁻³x^2
Hence;
0.54x10⁻³x^2 + 1.51x10⁻⁵x - 1.51x10⁻⁵=0
x^2 + 0.028x - 0.028 = 0
Solving the quadratic equation here;
x = 0.154 or −0.182
Ignoring the negative result, x = 0.154
Hence, fraction of butanoic acid that is in the dissociated form in this solution = 15.4%
What would
happen to the
vultures if the
gazelle
decreased?
Answer: If the gazelle population starts to decrease this could lead to some vultures not having enough food to eat
Explanation: This explains the obvious outcome of what would happen.
Hope you do well with what your doing :)
Mark as Brainliest please :)
Which product will precipitate in the following reaction:
CaCl2 + Na2CrO4 → CaCrO4 + 2 NaCl
A.NaCl
B.CaCrO4
C.Na2CrO4
D.CaCl2
Answer:
a
Explanation:
Ali says the climate of a town is rainy because it is raining outside today. Is she correct? In one or two sentences, explain why Ali is or is not correct about the climate of the town.
Answer:
Ali is incorrect.
Explanation:
Ali is wrong because the climate is a study of the weather pattern over a long period of time. You cannot look outside one day and determine the climate because the climate is long-term.
She could say the weather is rainy, because that is short term, but not the climate.
HELP PLEASEEEEEE ASAP
A condition in which bones become weak and brittle.
The body constantly absorbs and replaces bone tissue. With osteoporosis, new bone creation doesn't keep up with old bone removal.
thus 2) is correct.
a disease in which bone tissue becomes breakable and thin.
if it helps don't forget to like and Mark me
7. Which of the following is a proof that light travels in a straight line?
A. Formation of clouds
C. Formation of rainbows
B. Formation of colors
D. Formation of shadow
Answer:
formation of shadow is right
Answer:
correct answer is D
Explanation:
When you see a shadow, it is directly behind the object.
Do not abuse or misuse any piece of drawing instrument. ASAPPPP
For each process, predict the sign on the entropy change and write a sentence or two to explain how to make this prediction without completing any mathematics. a.A solid melts. b.A vapor is converted into a solid. CH 117 Recitation Name: _________________________________ ~ 196 ~ c.A liquid freezes. d.A solid sublimes e.A vapor condenses to a liquid. f.A liquid boils. g.Dissolving a tablespoon of salt in water. h.Combustion of gasoline.
Answer: a. A solid melts: [tex]\Delta S=+ve[/tex]
b. a vapor is converted to solid: [tex]\Delta S=-ve[/tex]
c. a liquid freezes: [tex]\Delta S=-ve[/tex]
d. A solid sublimes: [tex]\Delta S=+ve[/tex]
e. a vapor condenses to liquid : [tex]\Delta S=-ve[/tex]
f. a liquid boils: [tex]\Delta S=+ve[/tex]
g. dissolving a tablespoon of salt in water: [tex]\Delta S=+ve[/tex]
h. combustion of gasoline: [tex]\Delta S=+ve[/tex]
Explanation:
Entropy is the measure of randomness or disorder of a system. If a system moves from an ordered arrangement to a disordered arrangement, the entropy change is negative and vice versa.
a. A solid melts: The solid is converting to liquid, thus the randomness is increasing as the molecules are moving away and the intermolecular forces are getting weaker. Thus the entropy change [tex](\Delta S)[/tex] is positive.
b. a vapor is converted to solid: The gas is converting to solid, thus the randomness is decreasing as the molecules are moving close and the intermolecular forces are getting stronger Thus the entropy change [tex](\Delta S)[/tex] is negative.
c. a liquid freezes: The liquid is converting to solid, thus the randomness is decreasing as the molecules are moving close and the intermolecular forces are getting stronger. Thus the entropy change [tex](\Delta S)[/tex] is negative.
d. A solid sublimes: The solid is converting to gas, thus the randomness is increasing as the molecules are moving away and the intermolecular forces are getting weaker. Thus the entropy change [tex](\Delta S)[/tex] is positive.
e. a vapor condenses to liquid : The gas is converting to liquid, thus the randomness is decreasing as the molecules are moving close and the intermolecular forces are getting stronger. Thus the entropy change [tex](\Delta S)[/tex] is negative.
f. a liquid boils: The liquid is converting to gas, thus the randomness is increasing as the molecules are moving away and the intermolecular forces are getting weaker. Thus the entropy change [tex](\Delta S)[/tex] is positive.
g. dissolving a tablespoon of salt in water: The solid is converting to ions , thus the randomness is increasing as the ions can move freely. Thus the entropy change [tex](\Delta S)[/tex] is positive.
h. combustion of gasoline: The liquid is converting to gas, thus the randomness is increasing as the molecules are moving away and the intermolecular forces are getting weaker. Thus the entropy change [tex](\Delta S)[/tex] is positive.
23. Forces accelerate objects. Newton's second law state that force equals ______times?
Answer:
F = ma, or force is equal to mass times acceleration.
true or false atoms can be made up of just one type of atom
Answer:
false
Explanation:
A compound has the combined properties of the elements from which it is made. Atoms show the macro properties of an element.
SO2 + PCL5 → SOCL2 + POCL3
What mass of SOCL2 is produced when 1.35 g SO2 react with 2.75 g PCL5
Answer:
2.34
Explanation:
