The length of a covalent bond depends upon the size of the atoms and the bond order.
a. True
b. False
Answer:
True
Explanation:
The length of covalent bond depends upon the size of atoms and the bond order.
viagnesiumi anu
If I have 100g of Magnesium, how much Magnesium Nitride will I theoretically create?
O 24.3g Mg3 N2
O 138.4g Mg3 N2
415.2g Mg3 N2
O 200g Mg3 N2
Answer:
Theoretical yield is 138.4 g
Explanation:
In the first step we determine the reaction:
3Mg + N₂ → Mg₃N₂
Mass of reactant is 100 g. We assume the nitrogen is in excess, so we work with Mg. We convert mass to moles:
100 g . 1mol/ 24.3g = 4.11 moles of Mg.
Ratio is 3:1. 3 moles of Mg can produce 1 mol of nitride
Our 4.11 moles, may produce (4.11 . 1)/3 = 1.37 moles of Mg₃N₂
We convert mass to moles, to find the theoretical yield:
1.37 mol . 100.9 g/mol = 138.2 g
In the reactionpyruvate lactatethat is catalyzed by the enzyme lactate dehydrogenase, the compound on which the enzyme works, pyruvate, is called the _______.
Answer:
Substrate
Explanation:
In biochemical sciences, a substrate is a substance that is acted upon by an enzyme to yield a product. Enzymes are known for catalyzing biochemical reactions. The substances that are usually worked with during this catalytic process are termed as SUBSTRATES.
Substrates, which are usually changed during the process, binds to the active site on the enzyme and form an enzyme-substrate complex.
According to this question, pyruvate is converted to lactate in a reaction that is catalyzed by the enzyme lactate dehydrogenase. This means that the compound on which the enzyme works, pyruvate, is called the SUBSTRATE.
What is the formula of the compound Pentasilicon trioxide ?
Answer: the molecular formula of trioxide is ClOClO3 or Cl2O4
hope its helps you.
keep smiling be happy stay safe
Predict the products of below reaction, and whether the solution at equilibrium will be acidic, basic, or neutral.
N2O5 + 3H2O → __________
Answer: The product of the given reaction is [tex]HNO_{3}[/tex] and the solution at equilibrium will be acidic.
Explanation:
When two or more chemical substances react together then it forms new substances and these new substances are called products.
For example, [tex]3N_{2}O_{5} + 3H_{2}O \rightarrow 6HNO_{3}[/tex]
This shows that nitric acid [tex](HNO_{3})[/tex] is the product formed and it is an acidic substance.
Hence, the solution at equilibrium will be acidic in nature.
Thus, we can conclude that the product of the given reaction is [tex]HNO_{3}[/tex] and the solution at equilibrium will be acidic.
define saturated and unsaturated fats
Saturated fatty acids lack double bonds between the individual carbon atoms, while in unsaturated fatty acids there is at least one double bond in the fatty acid chain. Saturated fats tend to be solid at room temperature and from animal sources, while unsaturated fats are usually liquid and from plant sources.
Answer:
hope it is helpful to you
☆☆☆☆☆☆☆☆☆
The blank is the accepted form of gathering and reporting information within the science community.
Answer:
Scientific method.
Explanation:
Scientific method is the way taken to acquire scientific knowledge. It includes experiments, statistical analysis of existing data, and all kinds of observations of the world around us, while theoretical research is based on deriving certain theories about the world from basic principles, in a mathematical or logical way. The scientific method applies to both types of research, and emphasizes that scientific research is objective, that it can be verified by other scientists, and that knowledge is not acquired without context, but in a way that leads to a greater understanding of previous research and the world. we live in. To contribute to this, researchers are expected to clearly record both their findings and the methods they use to arrive at the results.
Senario: 2 years ago, a fruit was smuggled into California on a plane from an exotic, far away land. The homeowner saw that the fruit had maggots and tossed it into the backyard, hoping the seed would grow. The larvae hatched out and moved throughout the area. This fictitious insect will destroy fruit and has the possibility of spreading disease killing the trees. The insect consumes plants in the Prunus species of stone fruits? Look up the plant genus Prunus.
Discussion: The insect has spread over a large area of Southern California, discovered at UC Riverside. What steps would you do to control or eradicate the destructive exotic insect?
PLZ HELP THX WITH COLLEGE LEVEL EXPERICENCE
Answer:
The best existing methods of control—artemisinin-based drug treatment and insect control with chemical sprays and treated bednets—can reduce the burden of disease substantially, and can even eliminate the disease in some regions,
hope this will help you more
It takes to break a carbon-hydrogen single bond. Calculate the maximum wavelength of light for which a carbon-hydrogen single bond could be broken by
The question is incomplete, the complete question is;
It takes 412. KJ/mol to break a carbon-hydrogen single bond. Calculate the maximum wavelength of light for which a carbon-hydrogen single bond could be broken by absorbing a single photon. Round your answer to significant digits.
Answer:
289 nm
Explanation:
The energy of the photon = 412 × 10^3/6.02 × 10^23 = 6.84 × 10^-19 J
From;
E = hc/λ
h= Plank's constant
c= speed of light
λ = wavelength
λ = hc/E
λ = 6.6 × 10^-34 × 3 × 10^8/6.84 × 10^-19
λ = 2.89 × 10^-7 m
λ = 289 nm
The angular momentum quantum number (l) value of 0 indicates the ________ subshell.
Answer:
indicates the number of subshells
g 250. mL of a solution is created and has a molarity of 1.50 M. What is the molality of this solution if the volume and density of the pure solvent is about the same as the volume and density of the final solution and the density of the pure solvent is 1.15 g/mL
Answer:
1.30 m
Explanation:
First we calculate the number of moles of solute in the solution, using the definition of molarity:
Molarity = moles / litersConverting 250 mL ⇒ 250 / 1000 = 0.250 Lmoles = 1.50 M * 0.250 L = 0.375 molesThen we calculate the mass of solvent, using the given volume and density:
1.15 g/mL * 250 mL = 287.5 gConverting 287.5 g to kg ⇒ 287.5 / 1000 = 0.2875 kgNow we calculate the molality of the solution:
molality = moles of solute / kg of solvent = 0.375 mol / 0.2875 kgmolality = 1.30 mA piece of solid tin is submerged in silver nitrate solution a reaction occurs producing tin(IV) nitrate solution and solid silver
Write a word equation write a skeleton equation write a balanced chemical equation
Answer:
Tin + silver trioxonitrate V -------->Tin IV nitrate + silver
Explanation:
The term word equation refers to an equation in which the reactants and products are written in words rather than chemical symbols.
Note than tin is above silver in the electrochemical series hence silver will be displaced by tin as follows;
Tin + silver trioxonitrate V -------->Tin IV nitrate + silver
A chemist makes of nickel(II) chloride working solution by adding distilled water to of a stock solution of nickel(II) chloride in water.Calculate the concentration of the chemist's working solution. Round your answer to significant digits.
Answer:
0.0900 mol/L
Explanation:
A chemist makes 330. mL of nickel(II) chloride working solution by adding distilled water to 220. mL of a 0.135 mol/L stock solution of nickel(II) chloride in water. Calculate the concentration of the chemist's working solution. Round your answer to significant digits.
Step 1: Given data
Initial concentration (C₁): 0.135 mol/LInitial volume (V₁): 220. mLFinal concentration (C₂): ?Final volume (V₂): 330. mLStep 2: Calculate the concentration of the final solution
We prepare a dilute solution from a concentrated one. We can calculate the concentration of the working solution using the dilution rule.
C₁ × V₁ = C₂ × V₂
C₂ = C₁ × V₁/V₂
C₂ = 0.135 mol/L × 220. mL/330. mL = 0.0900 mol/L
What is the empirical formula for a compound if 300.00 g of it is known to contain 82.46224 g of molybdenum, 45.741 g of chlorine and the rest is bromine
Answer:
MoClBr₂
Explanation:
First we calculate the mass of bromine in the compound:
300.00 g - (82.46224 g + 45.741 g) = 171.79676 gThen we calculate the number of moles of each element, using their respective molar masses:
82.46224 g Mo ÷ 95.95 g/mol = 0.9594 mol Mo45.741 g Cl ÷ 35.45 g/mol = 1.290 mol Cl171.79676 g Br ÷79.9 g/mol = 2.150 mol BrNow we divide those numbers of moles by the lowest number among them:
0.9594 mol Mo / 0.9594 = 11.290 mol Cl / 0.9594 = 1.34 ≅ 12.150 mol Br / 0.9594 = 2.24 ≅ 2Meaning the empirical formula is MoClBr₂.
How many moles are contained in .984 molecules F2?
Answer:
1.6 x 10⁻²⁴ moles
Explanation:
We have 0.984 molecules of F₂. We know that 1 mol is equal to 6.022 x 10²³ molecules. Thus, we have a conversion factor: 1 mol/6.022 x 10²³ molecules
So, we multiply the molecules of F₂ by the conversion factor to calculate the moles:
0.984 molecules x 1 mol/6.022 x 10²³ molecules = 1.6 x 10⁻²⁴ moles
define saturated and unsaturated fats
Explanation:
Saturated fats are defined as the fat where fatty acid chains contain only single bonds.
For example, stearic acid, palmitic acid etc.
Unsaturated fats are defined as the fat where fatty acids contain one or more number of double bonds on the carbon atoms.
For example, oleic acid, palmitoleic acid etc.
For an ideal gas, classify the pairs of properties as directly or inversely proportional. You are currently in a sorting module. a. P and n b. V and n c. P and T d. T and V e. P and V1. directly proportional2. inversely proportional
Answer:
the result for the following are (a) P is directly proportional to n
(b) V is directly proportional to T (c) P is directly proportional to T (d) T is inversly proportional to V (e) P is inversely proportional to V
Determine whether the stopcock should be completely open, partially open, or completely closed for each activity involved with titration.
Close to the calculated endpoint of a titration ________
At the beginning of a titration _______
Filling the buret with titrant ________
Conditioning the buret with titrant _______
Answer:
Close to the calculated endpoint of a titration - Partially open
At the beginning of a titration - Completely open
Filling the buret with titrant - Completely closed
Conditioning the buret with the titrant - Completely closed
Explanation:
'Titration' is depicted as the process under which the concentration of some substances in a solution is determined by adding measured amounts of some other substance until a rection is displayed to be complete.
As per the question, the stopcock would remain completely open when the process of titration starts. After the buret is successfully placed, the titrant is carefully put through the buret in the stopcock which is entirely closed. Thereafter, when the titrant and the buret are conditioned, the stopcock must remain closed for correct results. Then, when the process is near the estimated end-point and the solution begins to turn its color, the stopcock would be slightly open before the reading of the endpoint for adding the drops of titrant for final observation.
A certain liquid has a normal boiling point of and a boiling point elevation constant . A solution is prepared by dissolving some urea () in of . This solution boils at . Calculate the mass of that was dissolved. Round your answer to significant digits.
This question is incomplete, the complete question is;
A certain liquid X has a normal boiling point of 150.4 °C and a molar boiling point elevation constant kb is 0.60 °Ckgmol⁻¹.
A solution is prepared by dissolving some urea (NH22CO) in 750 g of X. This solution boils at 150.9 °C . Calculate the mass of urea that was dissolved. Round your answer to 3 significant digits.
Answer:
the mass of urea that was dissolved is 37.5 g
Explanation:
Given the data in the question;
normal boiling point of X; Tb⁰ = 150.4 °C
boiling point of solution Tb = 150.9 °C
Change in boiling point Δt = Tb - Tb⁰ = 150.9 °C - 150.4 °C = 0.5 °C
Kb = 0.6 °C.kg.mol⁻¹
V = 750 g
Now, we know that
Δt = Kb × molality
so
0.5 = 0.6 × molality
molality = 0.5 / 0.6
molality = 0.833
we know that molar mass of urea is 60 g/mol
so
molality = mass × 1000 / molar mass × volume( g )
we substitute
0.833 = ( mass × 1000 ) / ( 60 × 750 )
0.833 = ( mass × 1000 ) / 45000
0.833 × 45000 = mass × 1000
mass = ( 0.833 × 45000 ) / 1000
mass = 37485 / 1000
mass = 37.485 ≈ 37.5 g { 3 significance figure }
Therefore, the mass of urea that was dissolved is 37.5 g
Explain what happens when water reacts with sodium metal. Support your answer with the relevant
equation.
Sodium metal reacts rapidly with water to form a solution of sodium hydroxide (NaOH) and hydrogen gas (H2). This reaction is exothermic.
Equation:
2Na + 2H²0 --------}- 2NaOH + H²
the pressure of a sample of helium in a 0.150 L container is 1520 torr. if the helium is compressed to the volume of 0.012 L without changing the temperature what would be the pressure of the gas
Answer:
19000 torr
Explanation:
From the question given above, the following data were obtained:
Initial volume (V₁) = 0.150 L
Initial pressure (P₁) = 1520 torr
Final volume (V₂) = 0.012 L
Temperature = constant
Final pressure (P₂) =?
The final pressure of the gas can be obtained by using the Boyle's law equation as illustrated below:
P₁V₁ = P₂V₂
1520 × 0.150 = P₂ × 0.012
228 = P₂ × 0.012
Divide both side by 0.012
P₂ = 228 / 0.012
P₂ = 19000 torr
Thus, the final pressure of the gas is 19000 torr
Identify a process that is NOT reversible. Identify a process that is NOT reversible. melting of snow baking of bread deposition of carbon dioxide freezing water melting of aluminum
Answer:
Identify a process that is NOT reversible.
Melting of snow
baking of bread
deposition of carbon dioxide
freezing water
melting of aluminum
Explanation:
A physical change is the one in which there is a change only in its physical state, color, the appearance of the substance. But the chemical composition of the substance remains unchanged.
It is a temporary change and can be reversed easily.
For example:
melting, freezing, deposition etc.
Baking is a permanent change and the chemical composition of the substance changes.
Hence, among the given options, baking of bread is not a reversible change.
Out of the following all are physical changes except baking of bread and physical changes are reversible so the process which is not reversible is baking of bread.
What are physical changes?Physical changes are defined as changes which affect only the form of a substance but not it's chemical composition. They are used to separate mixtures in to chemical components but cannot be used to separate compounds to simpler compounds.
Physical changes are always reversible using physical means and involve a change in the physical properties.Examples of physical changes include melting,boiling , change in texture, size,color,volume and density.Magnetism, crystallization, formation of alloys are all reversible and hence physical changes.
They involve only rearrangement of atoms and are often characterized to be changes which are reversible.
Learn more about physical changes,here:
https://brainly.com/question/17931044
#SPJ5
g in the following three compounds(1,2,3) arrange their relative reactivity towards the reagent CH3Cl / AlCl3. Justify your order
Answer:
3 > 2> 1
Explanation:
Aromatic compounds undergo electrophilic substitution reaction with several electrophiles.
Some substituted benzenes are more reactive towards electrophilic aromatic substitution than unsubstituted benzene.
Certain groups of substituents increase the ease with which an aromatic compound undergoes aromatic substitution.
If we look at the compounds closely, we will notice that only toluene leads to easy reaction with CH3Cl / AlCl3. Thus is due to the +I inductive effect of -CH3 which stabilizes the negatively charged intermediate produced in the reaction.
determine the number of moles of Cl in 1.9 mol of CaCl2
Explanation:
In the formula of [tex]CaCl_2[/tex] we can see that there are 2mol Cl in 1 molecule of CaCl2. So, now we can do some math to find out how many mol of Cl there are in 1.9mol CaCl2!
[tex]1.9molCaCl_2*\frac{2molCl}{1molCaCl_2}[/tex]
So, there are 3.8mol Cl
Question 1 Points 3 23 and Louis immerses his left hand in a beaker containing cold water and immerses his right hand in a beaker containing warm water. Then, he immerses both his hands on a beaker containing water at room temperature. Which of the following statements are true? 1. The hand that was in hot water would feel cold. 2. The hand that was in cold water would feel hot. 3. His two hands will feel the same hotness. Que O2 and 3 0 1 and 2 o 1 and 3 1.2, and 3
Answer:look down below
Explanation:
The statements that are true about hands that are immersed in the water are:
1. The hand that was in hot water would feel cold.
2. The hand that was in cold water would feel hot.
The correct option is B 1. and 2.
What is temperature?
Temperature is the measurement of the hotness or coldness of any object. It is measured in Celsius or kelvin. Our body has nerves that feel the different temperatures of any object. The high temperature is called hot and the low temperature is called cold.
When Louis put his hand in the warm water and one hand in the cold water. He feels the temperature of both glasses of water. Then he put both hands in the normal water.
So the hand that is warm would feel the water as cold and the hand with cold water would feel the water as hot.
Thus, the correct option is B. 1. and 2.
Learn more about temperature, here:
https://brainly.com/question/15267055
#SPJ5
All light waves can be described in terms of their speed, frequency, and___
Answer:
all light waves can be described in terms of their speed, frequency and wavelength
Explanation:
Hope it helps u.....
Which gas has the greatest kinetic energy at STP?
H2, Ne, N2 or none
Answer:
none All have the same kinetic energy
Explanation:
what class of organic compound is formed when cyclopentanone reacts with ethylamine in the presence of trace acid
The question is incomplete, the complete question is;
What functional group results when cyclopentanone reacts with ethylamine in the presence of trace acid? A) cyanohydrin B) semicarbazone C) imine D) enamine E) oxime
Answer:
imine
Explanation:
An imine is an unsaturated amine. An imine contains the carbon- nitrogen double bond.
Imines are obtained when a carbonyl compound is condensed with NH3 or an amine. The reaction involves several steps in its mechanism.
Since cyclopentanone is a ketone (carbonyl compound) and ethylamine is an amine,in the presence of trace acid, condensation of the two compounds occur to yield an imine
How many moles of carbon dioxide at STP will fit in a 50 liter container?
Answer:
n = 2.23 moles
Explanation:
Given the following data;
Standard temperature = 273 K
Standard pressure = 101.325 kPa
Volume = 50 liter
R = 8.314 J/mol·K
To find the number of moles, we would use the ideal gas law formula;
PV = nRT
Where;
P is the pressure.V is the volume.n is the number of moles of substance.R is the ideal gas constant.T is the temperature.Making n the subject of formula, we have;
[tex] n = \frac {PV}{RT} [/tex]
Substituting into the formula, we have;
[tex] n = \frac {101.325*50}{8.314*273} [/tex]
[tex] n = \frac {5066.25}{2269.722} [/tex]
n = 2.23 moles
Therefore, 2.23 moles of carbon dioxide at STP will fit in a 50 liter container.
determine the budget for tge fitness event.consider the attendance (should tou ask for registration fee.give shirts etc)
