jerome wants to photograph runners at a track meet. he wants his photographs to show motion. which type of setting will help emphasize a blur of motion?

The draw of the earth on the apple and the pull of the apple on the earth are forces operating in pairs (number of pairs, not individual forces).

Since there is no net force acting on the item while it is resting , the downward force (weight) must counterbalance the force acting upward (normal force). Weight travels downhill, therefore it is always negative. For an item to be at rest, all of the forces must be equal to 0.

According to Newton's first rule, in order to have no net force exerted on an object, it must be at rest. Because if there is a total force acting on the object, it will change velocity. It will accelerate.

To know more about Force visit

brainly.com/question/13191643

#SPJ4

Answer:

To find the acceleration of a car slowing from 12 m/s to a stop in 15 seconds, we can use the formula a = (vf - vi) / t, where a is the acceleration, vf is the final velocity, vi is the initial velocity, and t is the time. In this case, the initial velocity is 12 m/s, the final velocity is 0 m/s (since the car is coming to a stop), and the time is 15 seconds. Plugging these values into the formula, we get a = (0 - 12) / 15 = -0.8 m/s^2. This means that the car is slowing down at a rate of 0.8 meters per second squared.

12). When you move your hand or foot, your body has converted potential energy into kinetic energy.

13). When coasting while roller skating, you eventually stop due to

friction causes kinetic energy to transfer to thermal energy.

14).  A ball has 100 J of potential energy when it is on a shelf. The kinetic energy of the ball the instant it hits the floor is Kinetic increases, potential decreases.

Kinetic energy is the force that propels motion, which can be seen in the movement of a particle, an object, or a group of particles. A person walking, a baseball being thrown, a piece of food falling from a table, and a charged particle in an electric field are all examples of objects in motion that use kinetic energy.

To know more about kinetic energy visit:

https://brainly.com/question/26472013

#SPJ1

The fluid speed in the narrower pipe is 4.5 m/s.

The speed of a fluid traveling through a pipe is determined by its cross-sectional area. In this case, a pipe of cross-sectional area 1.2 m2 is narrowing to a pipe of cross-sectional area 0.4 m2. The fluid is currently traveling at 1.7 m/s in the larger pipe. To calculate the fluid speed in the narrower pipe, the following equation can be used:

Speed = (Cross-sectional area of larger pipe/ Cross-sectional area of smaller pipe) × Speed of fluid in larger pipe

In this case, the equation becomes:

Speed = (1.2/0.4) × 1.7 m/s

Speed = 4.5 m/s

Therefore, the fluid speed in the narrower pipe is 4.5 m/s.

Learn more about cross sectional area at : https://brainly.com/question/20532494

#SPJ4

Velocity of the elevator after 3 seconds is equal to v₂ = 3.79 m/s. The same two forces that were at play when the elevator was speeding up are still present. The normal force, which is less than at rest.

given,

mass of Corey = 95 Kg

reading of sale for first 3.0 s when elevator start to move = 810 N

scale reading for 3.0 s = 930 N

Gravitation force acting =

F = m g

F = 95 x 9.8

F = 931 N

using newton's second law, due to movement of elevator

F_{net} = m a

W - N = m a₁

930- 810 = 95 x a₁

a₁ = 1.26 m/s²

now,

velocity calculation

v₁ = a₁t

v₁ = 1.26 x 3.0 = 3.78 m/s

now, For second case

931 - 930 = 95 x a₂

a₂ = 0.010 m/s²

now, velocity after 3.0 s

v₂ = v₁ + a₂ t

v₂ = 3.78 + 0.010 x (3 - 3)

(3-3) because velocity after 3 second is calculate we need to calculate velocity after 3 s from beginning.

v₂ = 3.78 + 0.010

v₂ = 3.78 m/s

velocity of the elevator is equal to v₂ = 3.79 m/s.

When a person is moving in an elevator, there are two forces at work on him: gravity and the elevator's normal force. The elevator is stationary or travelling at a constant speed, and the two forces are of equivalent strength. When the elevator is accelerating uphill or downward, their magnitudes are not identical.

Since an elevator will move in a straight path with a constant speed, it exhibits uniform linear motion.

Learn more about velocity here:

https://brainly.com/question/18084516

#SPJ1

The Effective Spring Constant is [tex](\frac{k1k2}{k1 + k2} )[/tex] for a system of 2 springs with spring constant k1 and k2.

The term "spring constant" refers to the proportional constant k. It gauges the stiffness of the spring. A spring exerts a force F = -kx in the direction of its equilibrium position when it is stretched or compressed to a length that differs by an amount x from its equilibrium length.

Spring constants are available in plural (physics) a quality of a spring that is determined by the force acting on the spring to the displacement it produces.

K stands for the proportionality constant, commonly referred to as the "spring constant." In layman's words, stiffness and strength are shown by the k variable in Hooke's law (F = -kx). An item requires more force to be stretched to a specific length the greater the value of k.

Let the force actiong be F N

then , if k1 is the spring constant of spring 1

F = x1 * k1

or, x1 = F/k1.

Similarly for spring 2

x2 = F/k2

Now x1 + x2 = F (1/k1 + 1/k2)

or effective displacement

X= [tex]F(\frac{1}{k1} + \frac{1}{k2} )[/tex]

or, F = [tex]X * (\frac{k1k2}{k1 + k2} )[/tex]

So the Effective Spring Constant is [tex](\frac{k1k2}{k1 + k2} )[/tex].

To learn more about spring refer to :

https://brainly.com/question/14973217

#SPJ4

The two parakeets sitting on the swing with a combined center of mass 16.0 cm below the pivot swings with a frequency of 1.21Hz.

Given the data in the question

Length of pendulum; L=16.0cm =0.16m

Frequency; f=

Using the simple pendulum equation of time:

T2π = √L/9 -------let this be equation 1

Where T is the period of time, L is the length of the pendulum and g is the acceleration due to gravity(9.8m/s² ).

Also formula for Frequency:

f=1/T ------------let this be equation 2

Lets substitute equation 1 into equation 2

f = 1/2π√L/9

f = 1/2π√9/L

We substitute or values into the equation

f=1/2π√[9.8/0.16]

f=1/2π√[57.647-2]

f=1/2π*7.59256s

f=1.21 hZ

Therefore, the two parakeets sitting on the swing with a combined center of mass 16.0 cm below the pivot swings with a frequency of 1.21Hz.

To learn more about frequency refer to :

https://brainly.com/question/254161

#SPJ4

The velocity of fragment 2 is equal to 0.88 m/s at 31°.

From the law of conservation of momentum, the sum of the momentum before and after the collision must be equal.

m₁ u₁ + m₂.u₂ = m₁ v₁ + m₂.v₂

where m₁ & m₂ is the mass of the collided objects, u₁ & u₂ are their initial speed while v₁ & v₂ is their final speed.

Given, the mass of the spring, m = 1.2 kg

The speed of the spring, v = 0.50 m/s

The mass of the first fragment, m₁ = 0.4 kg

The initial speed of fragment 1, u₁ = 0.9 m/s

The mass of the fragment, m₂ = 1.2 - 0.4 = 0.8 kg

In x-direction: [tex]mucos\theta = m_1v_1 cos\theta + m_2 v_2 cos\theta[/tex]

1.2 ×0.5 ×cos(0) = 0 + 0.8× v₂ cosθ

v₂ cosθ = 0.75

In y-direction: 12 (0) = -0.4(0.9) + 0.8  v₂ sinθ

v₂ sinθ = 0.45

Now, [tex]\displaystyle \frac{v_2sin\theta}{v_2cos\theta} =\frac{0.45}{0.75}[/tex]

tanθ = 0.6

θ  = 31°

The value of the velocity of the fragment can be calculated as;

v₂ sinθ = 0.45

v₂ sin31 = 0.45

v₂ = 0.88 m/s

Thus, the magnitude of the velocity of fragment 2 is 0.88 m/s at 31⁰.

Learn more about the law of conservation of linear momentum, here:

brainly.com/question/17140635

#SPJ1

The birdman needs to soar 86.43m in the air to hit the bucket.

The ball's diameter, d, and the amount of time, t, it takes to cross the photogate can both be used to calculate the beginning horizontal velocity. Vo = d/t, then.

Time of motion of the birdman

The duration of the birdman's motion is the amount of time it takes for him to soar to his highest point.

R = Vₓt

where;

R is the birdman's motion's range or his horizontal distance.

Time of motion is t.

The horizontal speed is Vx.

t = R/Vₓ

t = 147/ 35

t = 4.2 seconds

Maximum height the missile has climbed

h = ¹/₂gt²

where;

The birdman's height is measured in h.

Gravitational acceleration, or g,

h = ¹/₂(9.8)(4.2)²

h = 86.43 m

The birdman must therefore fly to a height of 86.43m in order to hit the bucket.

To know more about horizontal distance visit:-

https://brainly.com/question/10093142

#SPJ1

The mechanical energy of the oscillator is lost in each cycle is 7.44%.

Mechanical energy- (Kinetic energy or potential energy-) is the energy- of either an objective in motions or the energy that is stored in objects by their position. Mechanical energy is also a driver of renewables to energy. Many forms of the  renewable energy relying on Mechanical energy to be the  adequately produced power or converted energy.

Since the energy is proportional to the amplitudes squared,then  we found the fractional changes (assumed small) is,

EE ,−E≈ E

dE=xm2dx

m2=xm2

2xmdxm=2x

mdx.m

Thus, if we approximately the fractional changes in  x

m​as x mdx m

then the above-mentioned calculations of shows that multiplying by  this by  2  should be give them fractional energy- change. Therefore, if  x

m decreases by  3.72%, then  E  must decreased by  7.44%.

To know more about mechanical energy click-

https://brainly.com/question/24443465

#SPJ4

Answer:C car

Explanation:

The focal length of the mirror is 50cm.

This refers to the distance from the lens or mirror to the focal point(F). It is measured in centimeters, cm or meters,m.

Formula for calculating the focal length of the mirror:

f = R * 2

Where,

f = focal length

R = the radius of curvature

What is a focal point (F)?

This refers to the point where by rays or waves meet after reflection or refraction, or the point from which diverging rays or waves appear to proceed.

In the question:

R = 25cm

f = R * 2

Substituting the values we have:

f = 25cm* 2

f = 50cm

Hence, the focal length of the mirror is 50cm.

Learn more about focal length on

https://brainly.com/question/13885819

#SPJ1

A BTU is defined as the amount of energy required to raise the temperature of one lb of water by one-degree celsius is False.

A British thermal unit is a measure of the amount of heat in a fuel or energy source. This is the amount of heat required to raise the temperature of 1 pound of liquid water by 1 degree Fahrenheit, the temperature at which water reaches its maximum density.

BTU is the amount of energy required to raise the temperature of 1 pound of water to 1 degree Fahrenheit above sea level. Technically, this measurement refers to the amount of energy required for this process when water is at its maximum density.

Learn more about The temperature here:- https://brainly.com/question/24746268

#SPJ4

When it happens mother should have to do cool the burn with tap water for 10 to 20 minutes immediately.

Stop the burning process. Cool the burn. Supply pain relief.

Before the arrival of qualified emergency help, you should:

Pain and skin injury from wet heat or vapors can result from hot water scalding. Because the damaged tissues and cells are destroyed, this kind of burn can be deadly. The heat could even cause your body to go into shock. These burns can be fatal in more severe circumstances.

Cool the burn.

Place the affected area under cool (not cold) flowing water for about 10 minutes. Until the pain goes away, apply a cool, wet cloth to the burned area of the face. If you have a mouth burn from hot food or drink, place a piece of ice in your mouth for a while.

To know more about burn click:

https://brainly.com/question/18526186

#SPJ4

Answer:

conduction i think

Explanation:

Answer:Conduction

Explanation:

The larger objects are rounded essentially comes down to gravity. The gravitational pull of an object will always be directed toward its mass centre. The more massive and gravitational attraction something has, the bigger it is.

The strength of the object itself opposes such force for solid objects. For instance, you are not drawn into the centre of the Earth by the downward force of gravity. The reason for this is that the ground is pushing back up at you; it is too strong to allow you to sink through it. The power of Earth has its limits, though. Imagine a massive mountain, like Mount Everest, becoming bigger and bigger as the planet's plates collide. Everest starts to sink as it gets taller due to its weight increasing. The mountain's height will be constrained as a result of the additional weight forcing it deeper into the Earth's mantle.

Hence, planets moves in fixed orbits.

To know more about planets.

https://brainly.com/question/14581221

#SPJ4

Energy cannot be generated or destroyed; it can only be changed from one form of energy to another, according to the rule of conservation of energy. This implies that a system always possesses the same amount of energy, barring external energy addition.

According to the rule of conservation of energy, energy cannot be generated or destroyed. It can only be changed from one form to another, though. It is simply changed from a form that we can use to one that is less useful. Energy problem as a result of this

Energy efficiency is necessary to save expenses and extend the life of the resources.

Learn more about conservation of energy refer

https://brainly.com/question/166559

#SPJ4

The number of times the train accelerated is 3 times.

option 3 is the correct answer.

The number of times the train accelerates in the given scenario depends on the speed or velocity of the train at every given time.

a = Δv / Δt

where;

From the formula given above, the train will only accelerate whenever there is a change in the velocity of the train. If the velocity of the train is constant, then the acceleration of the train will be zero.

The number of acceleration of the train in the given scenario is determined as follows;

Thus, from the illustration given above, the train change its speed three times and accelerated in those situation.

Learn more about acceleration here: https://brainly.com/question/14344386

#SPJ1

The reaction force to the action force during a rocket launch would be C. the force exerted by the ground or launch pad on the rocket.

The force that the ground or launch pad applies to the rocket during a rocket launch will act as a reaction force to the action force. The rocket is propelled upward by the force of explosion caused by the burning fuel and expanding gases. The force that keeps the rocket grounded and keeps it from moving is known as the reaction force, and it is the force that the launch pad or ground exerts in response to this action force.

Equal in magnitude but directed in the opposite direction, the action and reaction forces act on various objects. The reaction force affects the ground or launch pad, whereas the action force affects the rocket.

Learn more about force on:

https://brainly.com/question/12970081

#SPJ1

Complete question

During a rocket launch, the action force is considered the force of explosion from the burning fuel and expanding gases. Which of the following would be considered the reaction force?

A. The starting force

B. The force of the explosion

C. The force exerted by the ground or launch pad on the rocket.

Since linear momentum equals m v, it varies at each bounce by the same amount, r = R. For instance, if a ball bounces eighty percent of its height each time, it loses twenty percent of its energy each time.

An object's heat uptake or loss and the consequent temperature variations are related by the description above and the following equation (Q = m•C•T).

We now know that heat can occasionally be acquired or lost without a corresponding change in temperature. When the material is changing states, this is what happens.

The mass and speed of an item moving determine how much kinetic energy it has.

learn more about linear momentum refer

https://brainly.com/question/7538238

#SPJ4

The wavelength of visible light compare to radio waves in the sense that visible light waves have a shorter wavelength than radio waves.

The wavelength is described as the spatial period of a periodic wave which is the distance over which the wave's shape repeats.

Radio waves are electromagnetic waves that are produced by man with an oscillating circuit.

Radio waves are used in broadcasting, the waves used in television are those of shorter wavelength and those of radio are those of longer wavelength.

Longer radions are reflected in the ionosphere and can be detected in antennas which is located at great distances from the emitting source. The medium waves are less reflected in the ionosphere, due to their large wavelength they can overcome obstacles, so they can travel great distances.

It is known that the visible radiation waves have a wavelength between approximately 400 and 700 nanometers, the radio waves range from 1 centimeter to 1 km, so they have longer wavelengths than the waves belonging to the visible spectrum.

Learn more about wavelength at: https://brainly.com/question/10728818

#SPJ1

N is the total number of full load cycles, and S is the stress change. The area to the left and below the line represents cyclic stress and cycle count combinations for which no fatigue failure is anticipated to happen.

The distribution of forces, often known as stresses, under cyclic stress changes repeatedly throughout time. Imagine one of the huge wheels that propels an aerial lift, like a ski lift, as an illustration.

The plot of every one of these numbers is known as the cyclic stress-strain curve. Following plastic deformation, the material behaves as described by the curve. Typically, this activity differs from the initial action that is assessed in a conventional tensile test.

To know more about Cyclic stress visit:

https://brainly.com/question/13899363

#SPJ4

0.32 m/s²  the acceleration of a 250000 kg jumbo jet just before takeoff when the thrust on the aircraft is 80000 nn.

Acceleration the rate at which the speed and direction of a moving object vary over time. A point or object going straight forward is accelerated when it accelerates or decelerates. Even though the speed remains constant, motion on a circle accelerates because the directions is always shifting. Due to the fact that it includes both magnitude and direction, velocity is a quantity. As the rate at which velocity changes, acceleration is likewise a vector quantity.

The formula may be used to determine an object's acceleration given its mass and the force acting on it.

a= f/m

f is the force

m is the mass

a = 80000 / 250000

a = 0.32 m/s²

To know more about acceleration visit:

https://brainly.com/question/12550364

#SPJ4

5.16883548 m is the wavelength, if E.M radiation has a frequency of 58,000,000 Hz.

Given data :

Formula:

        λ = C/f

Where,

λ (Lambda) = Wavelength in meters

c = Speed of Light (299,792,458 m/s)

f = Frequency

λ  = 58,000,000 / 299,792,458 = 5.16883548

Learn more about frequency and wavelength refer to :

https://brainly.com/question/6297363

#SPJ1

Answer:

Together, the number of protons and the number of neutrons determine an element's mass number: mass number = protons + neutrons. If you want to calculate how many neutrons an atom has, you can simply subtract the number of protons, or atomic number, from the mass number.

Explanation:

Recommend frequent hand washing are the treatment method developed after the discovery of germ theory.

Learn more about steps of proper handwashing refer to :

https://brainly.com/question/29628173

#SPJ1

Momentum is conserved if the relative velocities before and after the impact are equal.

In most cases, momentum is the quantity that describes the internal motion of any moving object. Force, on the other hand, is the quantity that modifies the degree of action existing when applied to any object. Momentum is the amount of energy contained within a moving item.

Momentum is the amount of motion, to put it simply. Quantity may be assessed in this scenario because if an object is moving and has mass, it has momentum. If something is stationary, it doesn't have momentum.

To know more about momentum  visit:

https://brainly.com/question/24030570

#SPJ4

The energy needed to accelerate a rocket from 1/2 c to c would be 3 times of U  if it require U to accelerate from rest to 1/2c.

Now,we know that kinetic energy of rocket is given by =(1/2)mv² where m is the mass of the rocket and v is the velocity of rocket.

According to work-energy theorem,we know that work done=change in kinetic energy of the body.

Here,we have initial velocity of rocket is =0,and final velocity of rocket =1/2c

So,Work done=(1/2) ×m×(1/2)c² - 0²

=>U=(1 / 4) ×(1/2)×m×c²-------(eq1)

Now,we need to find the required amount of kinetic to accelerate it from 1/2c to c

So, required kinetic energy is Work done=(1/2)mc² - (1/2)×m×(1/2)c²

=>Required kinetic energy=(1/2×m×c²) × (1-1/4)

=>Required kinetic energy=(3/4)×(1/2×m×c²)

=>Required kinetic energy=(3)×((1 / 4) ×(1/2)×m×c²)

=>Required kinetic energy=3 ×times of U(from eq1)

Hence,kinetic energy required is 3 times of U.

To know more about kinetic energy, visit here:

https://brainly.com/question/999862

#SPJ4