what will be the ph change when 20.0 ml of 0.100 m naoh is added to 80.0 ml of a buffer solution consisting of 0.166 m nh3 and 0.186 m nh4cl? (assume that there is no change in total volume when the two solutions mix.)

Answers

Answer 1

The pH change is +0.125 when 20.0 ml of 0.100 m naoh is added to 80.0 ml of a buffer solution consisting of 0.166 m nh3 and 0.186 m nh4cl.

Find the moles of NaOH and the moles of your initial acid and base, calculate the new molarities, and use the henderson-hasselbalch equation with your new concentrations. So I used the pKa of NH4Cl for the initial pH. (9.3). pH = 9.3 + log (0.169M/0.183M), and I measured 9.265, which is slightly different. Then, using M = mol/L 0.1M = x mol/0.02L, I calculated the moles of NaOH, which were 0.002. I used the same method to determine the moles of NH3 and NH4Cl, which were 0.0135 and 0.01464, respectively, after determining the moles of NaOH.When a strong base is added to a buffer, the acidic component reacts with the added base, releasing OH- ions and increasing the moles of acid and base, respectively. With this information, I added the number of moles of NaOH to the moles of NH3 0.0135 + 0.002 = 0.0155 moles and subtracted the number of moles of NaOH from the moles of NH4Cl 0.01464 - 0.002 = 0.01264 moles, then calculated the molarities by dividing the moles by (0.08 L + 0.02 L to account for the addition of NaOH), and calculated the new concentrations.[NH3] = 0.155M, [NH4Cl] = 0.1264M, now that we have the new concentrations of acid and base, substitute them into the H-H equation to get the new pH: pH = 9.3 + log (0.155/0.1264) = 9.39.9.39 - 9.265 = a pH change of +0.125.

Learn more about PH here:

https://brainly.com/question/29766400

#SPJ4


Related Questions

methylhydrazine (ch6n2) is commonly used as a liquid rocket fuel. when 4.00 g of methylhydrazine is combusted in a bomb calorimeter, the temperature of the calorimeter increases from 25.00 oc to 39.05 oc. in a separate experiment the heat capacity of the calorimeter is measured to be 7.794 kj/oc. what is the heat of reaction for the combustion of a mole of ch6n2 in this calorimeter?

Answers

The heat of reaction for the combustion of a mole of C₆NH₂ in this calorimeter is  - 1.30 × 10³ kJ/mol.

The reaction is given as :

2CH6N2(l) + 5O2(g) ----> 2N2(g) + 2CO2(g) + 6H2O(l)

given that :

initial temperature = 25 °C

final temperature = 39.05 °C

heat capacity of the calorimeter = 7.794 kJ/°C

mass of methylhydrazine = 4 g

molar mass of methylhydrazine  = 46.1 g/mol

the heat of reaction Q = - C ΔT

                                       = - 7.794 × ( 39.05 - 25)

                                       = - 113.0 kJ

the heat of reaction of a mole = - (113.0 kJ / 4) × 46.1

                                                  = - 1.30 × 10³ kJ/mol

To learn more about heat of reaction here

https://brainly.com/question/15207455

#SPJ4

F. According to the rules for naming compounds that you learned in this course, what is the
chemical name of this new product? What is its common name? (2 points)

Answers

Molecular compounds are termed by using the stem of the first element's name plus the suffix -ide, followed by the second element. Numerical prefixes are used to specify the number of atoms in a molecule.

What does "chemical common name" mean?

The IUPAC defines a common name as one that clearly identifies a chemical but does not adhere to the current systematic naming convention. Acetone, which bears the scientific term, serves as an illustration of a common name. 2-propanone

What is the short answer to chemical?

A chemical is any substance whose composition is known. A chemical always consists of the same "substance," to put it another way. Water is one of the substances found in nature.

To know more about Molecular compounds visit:-

https://brainly.com/question/20920787

#SPJ1

an atom with an imbalance of electrons to protons is a. a hadron. b. a baryon. c. an ion. d. an isotope. e. none of these

Answers

An ion is an atom with an unbalanced ratio of protons to electrons. Atoms or molecules having associated net charges greater than zero are referred to as "ions."

a charged molecule or atom is referred to as an ion. It charges up or down depending on whether one or more electrons are gained or lost. Because of this, it can have a positive or negative charge. Consequently, an ion becomes charged when there is an imbalance between the proportion of positively charged protons to negatively charged electrons. Ions can be categorised into one of two major types. Cations and anions are what they are.A superscript with a plus sign and the number before the plus sign is applied to the chemical formula to represent the symbol for a cation.Anions are represented similarly to cations by the charge number followed by a negative sign.Another subatomic particle with a positive electrical charge is the proton. They are present in the atom's nucleus.

Learn more about ions Refer:brainly.com/question/14982375

#SPJ4

If an atom, such as hydrogen, is able to form a covalent bond, describe what happens when the
electron shells of two atoms overlap?

Answers

The potential energy between the nuclei is minimized and the orbital shells overlap.

What is a covalent bond?

We know that a covalent bond is the kind of bond that is formed when there is the combination of two atoms when there is the overlap of the orbitals of the two atoms. In the case of the hydrogen atoms, we can say that there is a bond as we notice that the two atomic orbitals have become overlapped on each other.

Let us note that when the two atoms are still far from each other, the potential energy between the atoms is high and as such the atoms of the element would tend to repel each other.

As the two atoms begin to approach each other, the repulsion between the nuclei of the elements is seen to become minimized and the bond is now seen to be formed as the atomic orbitals become overlapped.

Learn more covalent bond:https://brainly.com/question/10777799

#SPJ1

explain the difference in behavior between water and the buffer with addition of acid or base. are your results as expected? why or why?

Answers

The adding of an acid or base to a buffer seems to have no effect on the pH of the buffer. In contrast, going to add acid or base to unbuffered water drastically changes the pH.

Any hydrogen-containing substance skilled of making a donation a proton (hydrogen ion) to that other substance is defined as an acid. A base is a compound or ion that really can accept an acid's hydrogen ion. The sour flavours of weak acids is generally described by the contaminant that emits hydrogen ions in water and formation salts by incorporating with these metals. Acids have a bitter aftertaste and cause certain dyes to turn red. buffer is an aqueous solution that withstands adjustments in pH upon on the addition of either an acid or a base". Furthermore, adding water to a buffer or going to allow it to evaporate from of the buffer has no significant effect just on pH of the buffer.

Learn more about ph here:

https://brainly.com/question/29766400

#SPJ4

according to the building-up principle or aufbau principle, which subshell is typically filled next after the 6s subshell?

Answers

Aufbau's principle states that an electron in an atom is filled according to the energy of orbitals, orbital with minimum energy is first filled, and so on.

so the order of filling of electrons in orbitals are 1s 2s 2p 3s 3p 4s 3d 4p 5s 4d 5p 6s 4f 5d 6p 7s 5f 6d 7p 8s.

so, the 4f subshell is filled after the complete filling of electrons in 6s.

know more about "Aufbau's principle" here:

brainly.com/question/15006708

what is the formal charge on phosphorus in a lewis structure for the phosphate ion that satisfies the octet rule?

Answers

The formal charge on phosphorus in a lewis structure for the phosphate ion that satisfies the octet rule is 0.

What is a Lewis structure?

All valence electrons are represented by Lewis structures, which are structural formulas for molecules and polyatomic ions. These structural formulas are commonly referred to as Lewis dot structures since valence electrons are frequently shown as dots.

Why is Lewis structure used?

Chemical bonds and atomic structures are examined and understood using Lewis structures. The type of bonds created between atoms using valence electrons or/and lone pairs, as well as the number of bonds an atom can or will form with other atoms, can all be determined using Lewis dot diagrams.

Lewis structure of phosphate (po43-) ion.

Formal charge= no. of valence electrons - no. of non bonding valence electrons- [tex]\frac{total no. of bonded electrons }{2}[/tex]    

Formal charge of P= 5-0-[tex]\frac{10}{2}[/tex] = 0

To know more about Lewis structure:

https://brainly.com/question/20300458

#SPJ4

what is the nuclear binding energy per mole if the mass defect of a certain isotope is 0.1172 u per atom or 0.1172 g per mol? express your answer in joules. remember to use self-consistent units.

Answers

4.447 x10^13 J  is the nuclear binding energy per mole if the mass defect of a certain isotope is 0.1172 u per atom or 0.1172 g per mol? express your answer in joules.

BE = dleta mc^2.

Given that, delta m = mass defect = 0.4941 g per mol = 0.4941/1000 kg/mol c = 3x10^8 m/s

BE = ( 0.4941/1000) x (3x10^8)^2= 4.4469 x10^13

    = 4.447 x10^13 J

Nuclear binding energy is energy required to completely separate an atomic nucleus in with its constituting protons and neutrons, or the energy freed by combining protons and neutrons into a single nucleus. Isotopes are atoms that have the same number of protons but number of protons. They have nearly identical chemical composition but differ in volume and thus in physicochemical parameters.

Learn more about Nuclear binding energy here:

https://brainly.com/question/2923968

#SPJ4

Please help with this:
Typically, hard water used in a lab class would have been prepared by adding 1 gram of
magnesium sulfate per liter of distilled water. Magnesium sulfate contains 20.2%
magnesium ions by mass. What is its hardness in grains per gallon (GPG)? (One GPG
equals 17.1 mg/L.)

Answers

One grain of calcium carbonate, or 64.8 milligrams, is dissolved in one US gallon of water to represent one grain per gallon (gpg), a measure of water hardness (3.785412 L).

What is Water Hardness Measurement Scales?Understanding your test findings necessitates familiarity with the many water hardness testing scales that are employed. The majority of results are provided as a number that indicates the amount of calcium carbonate or calcium carbonate equivalents present in a specific unit of water. Depending on the measurement method, this value may be given in grains per gallon (gpg), parts per million (ppm), or milligrammes per litre (mg/L).Per Gallon of Grains Measurement of water hardnessThe hardness scale, expressed in gpg of calcium carbonate, can be seen as follows, according to the Water Quality Association:Soft is defined as gpg less than 1.An intermediate level of difficulty is between 1 and 3.5 gpg.The category of fairly challenging ranges from 3.5 to 7 gpg.The hard range is between 7 and 10.5 gpg.It's regarded quite difficult to get above 10.5 gpg.

To Learn more About grain per gallon refer to:

https://brainly.com/question/2350304

#SPJ1

(d) Caesium is another element in Group 1 of the Periodic Table.
(i) The table below lists some statements about the reaction of caesium with
cold water compared to the reaction of lithium with cold water.
Place ticks (✓) in the boxes to show the two correct statements.
the reaction with caesium is more vigorous
the reaction with caesium produces a different gas
the reaction with caesium produces an acidic solution
the reaction with caesium produces a different compound
the reaction of caesium is endothermic

Answers

Answer: The reaction with caesium is more vigourus.

The reaction with caesium produces different compund.

Explanation:

Cold water and cesium react to produce hydrogen gas and a mixture of cesium and hydroxide ions as byproducts.

Choose the exothermic reaction that is used to ignite the Mg + Oxygen reaction (step 2) that eventually lights the thermite.

2 H2 + O2 ----> 2 H2O
2 Na + O2 ----> Na2O
CH4 + 2 O2 ----> 2 H2O + CO2
2 C4H10 + 13 O2 ----> 8 CO2 + 5 H2O

Answers

The reaction that can light the thermite is the combination of methane and oxygen. Option C

What is an ignition reaction?

There is an ignition reaction when we burn a substance in another substance. Now, we know that an exothermic reaction refers to the kind of reaction hat is able to produce heat.

Since the exothermic reaction can be able to produce heat, this is the reaction that we can use to light the reaction between the magnesium and the oxygen so that we can be able to light the thermite.

Learn more about ignition reaction:https://brainly.com/question/2649564

#SPJ1

The periodic properties of elements are directly related to the A: group position, B: effective nuclear charge , C: energy levels ,D: Atomic Finite boundaries. ,choose the correct answer

Answers

The periodic properties of elements are directly related to the energy levels of the atoms of the elements.

The correct option is C.

What are the periodicity elements in the periodic table?

The periodicity of elements in the periodic table is the regular variation of the properties of the elements in the periodic table both down the group and across the periodic.

The properties of elements that show periodicity include;

atomic radiuselectronegativityelectropositivitymetallic characterionization energyelectron affinity

Learn more about the periodicity of elements at: https://brainly.com/question/15987580

#SPJ1

a brittle white crystalline solid has a melting point of 760 c and reacts when added to water. this substance is most likely what type of solid

Answers

A brittle white crystalline solid  reacts with when added to water is Quartz. It is a metamorphic solid.

Quartz is the most abundant silica mineral. Pure Quartz is colorless and transparent. It occurs in most igneous and practically all metamorphic and sedimentary rocks. It is used as a component of numerous industrial materials. Silicon (Si) has the atomic number 14 and is closely related to carbon. It is a relatively inert metalloid. Silicon is often used for microchips, glass, cement, and pottery. Silica is the most abundant mineral found in the crust of the earth. One of the most common uses of silica quarts is the manufacturer of glass. Quartz is the second most abundant mineral in the Earth's crust. Its chemical name is SiO2.

To learn more about Quartz please visit:

https://brainly.com/question/19451647

#SPJ4

how to balance: CaCl2(aq) + Na3PO4(aq) ⟶ Ca3(PO4)2(s) + NaCl(aq)

can someone explain how to do it? thanks

Answers

The given double displacement reaction can be balanced as written below:

[tex]\rm 3CaCl_{2} + 2Na_{3}PO_{4} \rightarrow Ca_{3}PO_{4} + 6 NaCl \\[/tex]

What is displacement reaction?

Displacement reactions are those in which one or two groups are replaced to form the new products. There are both single displacement reaction and double double displacement reactions.

In single displacement reactions, only one reactant will be replaced in the reaction whereas in double displacement reactions, two groups from the reactants are exchanged each other.

In the given reaction, the phosphate group is replaced to Ca and the Cl is group is shifted to Na metal as written in the chemical equation.

To find more on displacement reaction, refer here:

https://brainly.com/question/29307794

#SPJ1

this is the chemical formula for cassiterite (tin ore): a geochemist has determined by measurements that there are moles of tin in a sample of cassiterite. how many moles of oxygen are in the sample? round your answer to significant digits.

Answers

There are two moles of oxygen in cassiterite (tin ore), SnO2, for every mole of tin. As a result, if we have 13 moles of tin, we should have 13 * 2 moles of oxygen. This results in 26 moles of oxygen.

Cassiterite (SnO2) is the most essential tin ore, and it is frequently located in granite veins, granite pegmatites, and greisen. The name is derived from the Greek kassiteros, which means tin.

Cassiterite is a tin oxide mineral with the chemical formula SnO2. It is the primary significant source of tin, accounting for the majority of the world's supply. Primary cassiterite is found in trace amounts in igneous and metamorphic rocks all over the world. It is a mineral that can be found in soils and sediments. Cassiterite is more resistant to deterioration than many other minerals, so it is found in stream and shoreline sediments. Colors include black, brownish black, reddish brown, brown red, yellow, gray, and white.

For more information on Cassiterite, visit :

https://brainly.com/question/18484656

#SPJ4

nickel has a face-centered cubic (fcc) structure and has a density of 8.90 g/cm3. what is its atomic radius?

Answers

The nickel has a face-centered cubic (fcc) structure and has a density of 8.90 g/cm3. its atomic radius is 1.36 × 10⁻⁸ cm.

given that :

density = 8.90 g/ cm³

the density is given as :

density = mass / volume

no. of atoms = 8 (1/8) + 6(1/2)

volume = (r ×  8 (1/8))³

mass = 4 atoms ×  mol / 6.022 × 10²³ atoms × 58.68 g /mol

density = mass / volume

8.90 g/ cm³ = (4 atoms ×  mol / 6.022 × 10²³ atoms × 58.68 g /mol ) /  (r ×  8 (1/8))³

r = 1.36 × 10⁻⁸ cm

Thus, the atomic radius is  1.36 × 10⁻⁸ cm.

To learn more about atomic radius here

https://brainly.com/question/2795197

#SPJ4

what are the correct coefficients if the law of conservation of mass is applied to the decomposition of solid ammonium nitrite to nitrogen gas and liquid water?

Answers

Ammonium nitrite, NH4NO2, will decompose to yield nitrogen gas and water Vapor by the following equation:

NH4NO2(s)--->2H2O(g)+N2(g)

A decomposition reaction can be defined as a chemical reaction in which one reactant breaks down into two or more products. As per law of conservation of mass, the mass of your initial substances (reactants) will be the same as the mass of the substances that you get after the reaction has occurred (products). The mass will stay the same because the number of each kind of atom stays the same. The mass will increase because a new kind of molecule is formed. The principle is that the mass of matter, in a closed system, will always be the same no matter what type of change happens to the matter. Whether it's a change in state, or dissolving, or a chemical reaction, or any combination of these, the amount of mass will not change.

To learn more about chemical reaction check the link below:

brainly.com/question/11231920

#SPJ4

Draw the Lewis structure for PF3Cl2 in the window below and then answer the questions that follow. What is the electron-pair geometry for P in PF3Cl2 ? What is the the shape (molecular geometry) of PF3Cl2?

Answers

Sp[tex]3[/tex] hybridization of a molecule with two lone pairs is present. This molecule's geometry is determined by its electron pair structure. If more than one bond angle is possible, separate each one with a space.

What is hybridization?The process of combining two atomic orbitals to produce a new variety of hybridized orbitals is described as hybridization. Usually, this mixing creates hybrid orbitals with entirely different energies, shapes, and other characteristics. Atomic orbitals with the same energy level are primarily responsible for hybridization. However, if the energies of the orbitals are equal, the process can involve both fully filled and partially filled orbitals. We can better understand bond formation, bond energies, and bond lengths by using the hybridization concept, which is an extension of valence bond theory. During the hybridization process, which primarily entails the merging of two orbitals, two "p" orbitals, or the mixing of a "s" orbital with a "p," the atomic orbitals of comparable energies are mixed together.

To learn more about valence bond theory refer to:

https://brainly.com/question/23129240

#SPJ4

ip the electron in a hydrogen atom with an energy of -0.544 ev is in a subshell with 18 states. part a what is the principal quantum number, n, for this atom?

Answers

The principle quantum number(n) for this atom is 5

The position in an atom's shells and the size of an electron orbital are described by the primary quantum number, which is the most significant. The quantum number connected to the angular momentum of an atomic electron is called the azimuthal quantum number.

The energy of the electron in a hydrogen atom [tex]E_{n} = -0.544eV[/tex]

For hydrogen, Z = 1

The principal quantum number for [tex]n[/tex] for this atom is calculated by for this atom is determined using Bohr's atomic model,

So that [tex]E_{n} = \frac{-13.6(Z)^{2}}{n^{2}}eVatom^{-1}[/tex]

Where [tex]n[/tex] is the principal quantum number, [tex]E[/tex] is the energy, and [tex]Z[/tex] is the atomic number The values are substituted,

=> [tex]-0.544eV = -\frac{13.6(1)^{2}}{n^{2}} eVatom^{-1}[/tex]

[tex]n^{2} = -\frac{13.6}{-0.544} \\n^{2} = 25\\n = 5[/tex]

Learn more about Bohr's atomic model:

brainly.com/question/18642660

#SPJ4

ammonium ion (nh4 ) is an acid that can dissociate to form ammonia (nh3) and h in aqueous solution. the pka for this reaction is 9.25. when total ammonium ion is 50% dissociated, what is the ph?

Answers

When total ammonium ion is 50% dissociated, The pH is 9.25.

Given, the pKₐ of ammonium ion (NH₄⁺) is 9.25.

The dissociation of NH₄⁺ to ammonia (NH₃) and H⁺ in aqueous solution is represented below.

It is stated that the ammonium ion is 50% dissociated in the solution. Therefore the concentration of each species at that instant [if started with 1M conc. of NH4+ (aq)] is summarized as follows:

                                              NH4+ (aq) ⇌ NH3 (aq) + H+ (aq)

Initial conc. (in M)                     1                   -                 -

At 50% dissociation 1-0.5, i.e., 0.5          0.5          0.5

The given value of pKₐ immediately reminds us of the form of Henderson-Hasselbalch equation containing pKₐ , i.e.,

pH = pKₐ + log₁₀ [tex]\frac{[salt]}{[acid]}[/tex]  _ _ _(i)

But, NH₄⁺ (aq) exists as the conjugate acid form, as well as the salt (ionized) form. Hence, we cannot use equation. (i) for our calculations.

Therefore, we need to convert the above value of Kₐ to the equivalent Kb (for NH₃), corresponding to the reverse equilibrium.

This is achieved by using the relation

Kb = [tex]\frac{Kw}{Ka}[/tex]

or,  -log₁₀ Kb = -log₁₀ Kw + log₁₀ Ka

or,  pKb = pKw - pKa = 14 - 9.25 = 4.75

where, pKw = 1 x 10⁻¹⁴ (at 298 K).

Therefore, pKb of ammonia (NH₃) = 4.75

Now, we need to use the form of Henderson-Hasselbalch equation which uses Kb; which is in fact

pOH = pKb + log₁₀ [tex]\frac{[salt]}{[base]}[/tex]  _ _ _(ii)

where the salt is NH₄⁺, and the base is NH₃. Further, we know that

Kw = [H⁺][OH⁻]  or,  pOH + pH = pKw = 14    or,   pOH = 14 - pH

Substituting this relation in eq. (ii) gives

14 - pH = pKb + log₁₀ [tex]\frac{[NH4+]}{[NH3]}[/tex]

or, pH = 14 - pKb — log₁₀ [tex]\frac{[NH4+]}{[NH3]}[/tex]

As calculated, pKb = 4.75, [NH₄⁺] = 0.50 M, while [NH₃] = 0.50 M, assuming we start with a conc. of 1M NH₄⁺. Hence,

pH = 14 – 4.75 – log₁₀ [tex]\frac{0.50}{0.50}[/tex]

     = 9.25 - log₁₀ ( 1 )

     = 9.25 - 0

pH = 9.25

Hence, the pH of a solution consisting of 50% NH₃ and 50% NH₄⁺ will be equal to 9.25.

To learn more about pH calculations, Here :

https://brainly.com/question/27991105?referrer=searchResults

#SPJ4

Draw the Lewis structure for SF6 and then answer the following questions that follow.
-Do not include overall ion charges or formal charges in your drawing.
Questions:
1). What is the electron-pair geometry for S in SF6?
2). What is the shape (molecular geometry) of SF6?

Answers

SF6 molecular geometry will be octahedral because if we look at the structure sulphur hexafluoride has a central sulphur atom around which12 electrons or 6 electron pairs are present and there are no lone pairs.

What is SF6?Sulphur hexafluoride – also known as SF6 – is a ‘greenhouse gas’ that has long played a part in global warming, similar to that of carbon dioxide (CO2).CO2 has been a focal point of climate change for many years. Released from the burning of fossil fuels and other carbon-intensive practices, it creates a cover that traps heat from the sun in the earth’s atmosphere, warming the planet and the oceans. This is what’s known as the ‘greenhouse effect’.SF6 also has this effect, but is much more potent than CO2. Today, wider understanding of the potency of this gas – and the need to reach net zero carbon emissions by 2050 in order to tackle climate change – is causing a rethink of its use.

To learn more about ‘greenhouse effect’ refer to:

https://brainly.com/question/19521661

#SPJ4

is a chemist has 1.87 moles of na2o and causes it to decompose into its constitiuent elemtns how many moles of na will form

Answers

3.74 moles of Na will be produced after the decomposition of Na₂O.

The decomposition reaction of Na2 is as follows:

2Na₂o → 4Na + o₂

Given, moles of Na₂o = 1.87

From stoichiometric coefficient 2 in Na₂o, after decomposition we get coefficient as 4 of Na. That means the yield of Na is double the reactant.

Hence, the moles of Na after decomposition= 2 x 1.87 = 3.74 moles

Learn more about Stoichiometry:

brainly.com/question/9743981

# SPJ4

calculate the volume in liters of a mm silver(ii) oxide solution that contains of silver(ii) oxide . round your answer to significant digits.

Answers

The volume of the solution is 1.84 × [tex]10^{4}[/tex] L.

The formula used to get the molarity of the solution is used to determine the volume of the solution:

Molarity= [tex]\frac{Mass of the solute}{molar mass of solute * Volume of solution(in L)}[/tex]

We are given:

Molarity of solution = 8.75 × [tex]10^{-5}[/tex] M

Given the mass of silver (II) oxide = 200 g

Molar mass of silver (II) oxide = 124 g/mol

Put the values in the formula:

8.75 × [tex]10^{-5}[/tex][tex]10^{-5}[/tex] = [tex]\frac{200}{124* Volume}[/tex]

Volume= 1.84 × [tex]10^{4}[/tex] M

A chemical species' concentration in a solution, specifically the amount of a solute per unit volume of solution, is measured by its molar concentration. The most used molarity unit in chemistry is the number of moles per liter, denoted by the unit symbol mol/L or mol/dm3 in SI units.

To know more about molarity click on the link below:

https://brainly.com/question/17138838

#SPJ4

the epicardial fat pad . a. can be mistaken for a pericardial effusion b. appears heteroechoic and moves with the heart c. is always visible in all cardiac views d. all of the above e. a and b onl

Answers

The epicardial fat pad . a. can be mistaken for a pericardial effusion b. appears heteroechoic and moves with the heart.

It is the posterior fat pad that is a sign that indicates a pathology when one looks at an x-ray. When a crescent fat is observed in the x-ray, it indicates there is an elbow joint effusion since normally the posterior fat cannot be seen from the x-ray.

In radiography, X-rays are used to view inner parts of the body for medical observation, analysis and to know the treatment procedure to adopt.

When a non visible posterior fat pad on a well-exposed, then it generally suggests a negative study for injury. This means that the features observed are unrelated to any type of injury. This eliminates option c.

Therefore, only option a and b are correct that the epicardial fat pad . a. can be mistaken for a pericardial effusion b. appears heteroechoic and moves with the heart.

To know more about fat pad, refer: https://brainly.com/question/13933231

#SPJ4

select true or false: more energy is required to break a bond with an order of 3/2 than is required to break a bond of order 2.

Answers

Answer: The answer is false

Explanation:

HI(aq)+Rb2S(aq)→ What is the answer to this please

Answers

The given equation is a double displacement reaction. It can be balanced as follows:

[tex]\rm 2HI + Rb_{2}S \rightarrow H_{2}S + RbI_{2}[/tex]

What is displacement reaction?

Displacement reaction is a type of reaction in which one or two group from the reactants displaces by other groups. There are both single displacement and double displacement.

In single displacement reaction, only one group is displaced. Whereas, in double displacement reactions, two groups are displaced each other between reactants.

In the given reaction, the iodine atom and sulphide group are displacing as written in the equation.

To find more on displacement reaction, refer here:

https://brainly.com/question/29307794

#SPJ1

Diazomethane is a toxic yellow gas that is both sensitive and explosive: However, it is a useful reagent in the laboratory to make key intermediates by reacting with carboxylic acids in a quick and clean reaction_ Draw the expected organic product of diazomethane with the following carboxylic acid. COOH Hc N=N; CH3

Answers

Methyl esters are created when carboxylic acids and diazomethane interact. Diazomethane is used to create methyl esters and has a high degree of reactivity.

Diazomethane reacts swiftly and extremely effectively, producing just N2 as a byproduct, making it an appealing alkylating agent for carboxylic and phenols (Black, 1983). As it responds, its inherent yellow color releases, automatically indicating the status of the reaction. Methyl esters are created when carboxylic acids and diazomethane interact. Diazomethane is created in-situ and then interacted with the carboxyl group right away to create the methyl ester due to its high reactivity. Diazomethane has mostly been used to transform carboxylic acids into esters (diazoalkales) that may be examined using GC/MS or HPLC-MS. In etherate solutions, methyl esters can be produced at room temperature quickly, thoroughly, and quantitatively.

Learn more about acids

https://brainly.com/question/29426933

#SPJ4

which list contains only strong acids? (5 points) a. hcl, hno3, hf, hclo4 b. h2so4, h3po4, hclo4, nh3 c. hno3, h2so4, naoh, h3po4 d. hcl, hno3, h3po4, hclo4 e. hcl, h2so4, hclo4, hi

Answers

a. hcl, hno3, hf, hclo4 b. h2so4  list contains only strong acids.

Chloric acid, hydrochloric acid, hydrochloric acid, hydroiodic acid, nitric acid, perchloric acid, and sulfuric acid are the 7 main acids. These are strong acids since they can completely dissociate in water. A strong acid is described as an acetone that completely disintegrates when added to water. Because the hydrochloric acid inside the preceding example donates every one of its protons to the remedy and totally dissolves, it is classified as a strong acid.

learn more about strong acids here:

https://brainly.com/question/16749233

#SPJ4

A buffer solution is prepared that is 0.18 M NH3 and 0.27 M NH4Cl. What is the pH of this buffer? Kb for NH3 is 1.8 x 10-5
The correct answer is: 9.08
Can someone explain how to do this for me?

Answers

The pH of acid is between 0-7 on pH scale while for base pH range is from 7-14. Therefore, the pH of this buffer is  5.14. pH is a unitless quantity.

What is pH?

pH is a measurement of amount of hydronium ion H₃O⁺ in a given sample. More the value of hydronium ion concentration, more will be the solution acidic.

On subtracting pH from 14, we get pOH which measures the concentration of hydroxide ion in a given solution. pH depend on the temperature. At room temperature pH scale is between 0 to 14. pH of neutral solution is 7.

0.18 M =NH₃

0.27 M= NH₄Cl.

Kb of NH₃ = 1.8 × 10⁻⁵

pKb = - log (kb)

      = - log (1.8 × 10⁻⁵)

       = 4.74

Using Henderson equation

pH = Pkb +ln [ NH₄Cl ]/ [NH₃]

    = 4.74 + ln (0.27 /0.18)

    = 5.14

Therefore, the pH of this buffer is 5.14.

To learn more about pH, here:

https://brainly.com/question/27945512

#SPJ1

consider the following oxides: so2so2 , y2o3y2o3 , mgomgo , cl2ocl2o , and n2o5n2o5 . how many are expected to form acidic solutions in water?

Answers

Nonmetal oxides form acid solutions. SO2, Cl2O, and N2O5 are acid solutions.

A chemical that offers off hydrogen ions in water and paperwork salts through combining with positive metals. Acids have a sour flavor and turn positive dyes purple. a few acids made by using the body, such as gastric acid, can assist organs work the way they must. An example of an acid is hydrochloric acid.

An acidic solution has a high attention of hydrogen ions, H +start superscript, plus, stop superscript, greater than that of pure water. An acidic solution is a liquid combination that happens when hydrogen ions are launched while mixed with water. This definition is known as the Brønsted-Lowry theory: acids provide hydrogen protons, at the same time as bases "accept" hydrogen protons. some answers are more acidic than others.

Learn more about acid solutions here:- https://brainly.com/question/14102151

#SPJ4

Other Questions
explain the three important principles enshrined in the framework convention on climate change. g Is 4/5 divided by 1/3 greater than 1 In your own words please also asapWhat is the technological design process? Give an example. A set of data items is normally distributed with a mean of 300 and a standard deviation of 60. Whyd the data item in this distribution that corresponds to the given z-score Z= 2.5 a typical tendon has a strength of 16000 pounds per square inch (psi). let's assume the achilles tendon is roughly rectangular in cross section with dimension of .4 inches x .2 inches. you can use this to calculate the force at which the achilles tendon will start to fail. at what force might the achilles tendon start to fail (in pounds, lb)? a physical injury to the body's tissues can result from the repeated action of relatively small forces acting on tissue, and this is called: question 19 options: a) a chronic injury. b) a mechanistic injury. c) an acute injury. d) a microinjury. a local business that hires a sign holder to stand on the sidewalk, trying to catch the attention of passersby by promoting a special marketing event, is using . The family is not required to consent to organ donation if a signed donor card is present on the deceased. Need answers for all parts. PLS HELPP!! The U.S constitution creates a strong national government but also reserves significant power to individual states governments this is an example of which american founding idealA. Checks and Balances B. Representative democracyC. Federalism D. Separation of power Given the functions f(x) = x3 + x2 3x + 4 and g(x) = 2x 4, what type of functions are f(x) and g(x)? Justify your answer. What key feature(s) do f(x) and g(x) have in common? (Consider domain, range, x-intercepts, and y-intercepts.) avidin is a protein that binds extremely tightly to biotin. therefore, it is a potent inhibitor of biotin-requiring enzymatic reactions. consider glucose biosynthesis from each of the following substrates and predict which of these pathways would be inhibited by avidin. a. lactate b. oxaloacetate c. malate d. fructose-6-phosphate e. phosphoenolpyruvate If cos2 = 3/4 and terminates in quadrant III, find cos : deborah tannen suggests that men are more likely to use communication to compete and women are more likely to use communication to A financial statement that reports assets, liabilities, and owners equity on a specific date is called: _______ true or false? in an incremental backup, you start with a full backup when network traffic is light Im confused on this question calculate the mass percent of a nacl solution prepared by mixing 35.0 g nacl with 125.0 ml of pure water. Generic medications __________. A. Are more expensive than the original versionb. Are designed to cause more side effects than the original versionc. Often won't help the conditiond. Include the same active ingredients as the original medication. TRUE OR FALSE in physics, every physical quantity is measured with respect to a unit. time is measured in seconds, length is measured in meters, and mass is measured in kilograms. knowing the units of physical quantities will help you solve problems in physics.