Joe is taking the train from his hometown to Georgetown and back to his hometown. The distance to Georgetown is 350 miles. How much time will Joe spend traveling on the train if the train travels at an average speed of 42 miles per hour?


A. 3 hours 50 minutes

B. 4 hours 20 minutes

C. 8 hours 20 minutes

D. 11 hours 40 minutes

E. 16 hours 40 minutes

Answer: 96

Step-by-step explanation:

M = 180 - 84 = 96

m<k = 96

Using proportions, the real height of the telephone mast is estimated to be 9 meters.

A proportion is a fraction of a total amount, and equations are constructed using these fractions and estimates to find the desired measures in the problem using basic arithmetic operations like multiplication and division. Because the telephone box and the mast are similar figures in this problem, their side lengths are proportional.

The following proportional relationship is established as a result:

x / 1.5 cm = 10.8 cm / 1.8 cm.

The relationship's left side can be simplified as follows:

6 = x / 1.5 cm.

The estimate is then calculated using cross multiplication, as shown below:

6 x 1.5 cm = 9.5 cm².

To know more about fraction, visit:

https://brainly.com/question/10354322

#SPJ1

Answer:11

Step-by-step explanation:

The Height of tree is around 8.33 feet tall.

In science, we work out the Height of an item utilizing distance and points. Distance is the even distance between the items, and point is the point over the level of the article's top, which gives the item's level.

We can utilize the rule of comparable triangles.

The hypotenuse of this triangle would be the line associating Jenny's eyes to the highest point of the tree (we should refer to this distance as "h").

We can set up the accompanying extent between the two triangles:

h / 20 = (h + 5) / 8

To solve for "h", we can cross-multiply and simplify:

8h = 20(h + 5)

8h = 20h + 100

12h = 100

h = 8.33 feet

To know more about Height visit:-

https://brainly.com/question/10726356

#SPJ1

Answer: 4x(x - 4)

Step-by-step explanation:

4x² - 16x = 4x(x - 4)

Now we can see that the expression inside the parentheses can also be factored:

x - 4 = (x - 4)

So the fully factorized expression is:

4x² - 16x = 4x(x - 4) = 4x(x - 4)

Answer:

ㅤ

- 4x( x + 4 )

ㅤ

Step-by-step explanation:

ㅤ

[tex]\large{\pmb{\sf{ - 4x^{2} - 16x}}}[/tex]

ㅤ

[tex]\large{\underline{\underline{\sf{Taking \: Out \: {\green{4}} \: As \: Common:-}}}}[/tex]

ㅤ

[tex]\large{\pmb{\sf{\leadsto{- 4(x^{2} + 4x)}}}}[/tex]

ㅤ

[tex]\large{\underline{\underline{\sf{Taking \: Out \: {\green{x}} \: As \: Common:-}}}}[/tex]

ㅤ

[tex]\large{\purple{\boxed{\pmb{\sf{\leadsto{- 4x(x + 4)}}}}}}[/tex]

━━━━━━━━━━━━━━━━━━━━━━

[tex]\star \: {\large{\underline{\underline{\pink{\mathfrak{More:-}}}}}} \: \star[/tex]

ㅤ

[tex]\large{\dashrightarrow}[/tex] Two positive always makes positive sign when multiplied.

ㅤ

[tex]\large{\dashrightarrow}[/tex] Two negatives always makes positive sign when multiplied.

ㅤ

[tex]\large{\dashrightarrow}[/tex] A positive and a negative always makes negative sign when multiplied.

ㅤ

[tex]\large{\dashrightarrow}[/tex] The sum of two positives is always positive with a positive sign.

ㅤ

[tex]\large{\dashrightarrow}[/tex] The sum of two negatives is always positive with a negative sign.

ㅤ

[tex]\large{\dashrightarrow}[/tex] The sum of a positive and a negative is always negative with the sign of whose number is greater.

Using simple mathematical operations we know that 4.5 ft of fabric is needed.

A rule that specifies the right procedure to follow while evaluating a mathematical equation is known as the order of operations.

Parentheses, Exponents, Multiplication and Division (from Left to Right), Addition, and Subtraction are the steps that we can remember in that order using PEMDAS (from left to right).

So, to find the fabric needed:

1 2/7 feet of fabric

Then, 3 1/2 hands will need:

= 9/7 * 7/2

= 9/2

= 4.5 ft of cloth

Therefore, using simple mathematical operations we know that 4.5 ft of fabric is needed.

Know more about mathematical operations here:

https://brainly.com/question/20628271

#SPJ1

Correct question:

Emily needs enough fabric for 3 1/2 hat's since she has half a hat done already. if each hat requires 1 2/7 feet of fabric, how much fabric will she need to make the 3 1/2 hat's?

Given that a 0.625 kg basketball is dropped from a height of 3 meters straight down. The coefficient of restitution between the ball and the ground is e = 0.87. At 0.15 seconds after the basketball is dropped, a 58.5-gram tennis ball is dropped from the same 3-meter height straight onto the basketball. If the coefficient of restitution between the tennis ball and the basketball is e = 0.9,

    determine how high the tennis ball bounces above the ground after the collision. Neglect the size of the balls.

The balls meet at a height of 0.5073 m above the ground. Hence the height that the tennis ball bounces above the ground is to be calculated.

Given that the coefficient of restitution between the ball and the ground is e = 0.87The coefficient of restitution between the tennis ball and the basketball is e = 0.9

The coefficient of restitution(e) is defined as the ratio of the relative velocity of separation and relative velocity of approach between two objects.

When a ball falls from height, it gains potential energy.

Potential energy (PE) = mghWhere, m = mass of the object, g = acceleration due to gravity, h = height

PE of Basketball = mgh= 0.625 kg * 9.81 m/s² * 3 m= 18.4 Joules

Initial kinetic energy (KE) = PE of Basketball

KE of Basketball = 18.4 J

Let the velocity of the basketball before collision be u1 and the velocity of the tennis ball before collision be u2. After the collision, let the velocity of the basketball be v1 and the velocity of the tennis ball be v2.

Using the coefficient of restitution (e) we can find the velocity of the balls after collision

   v1 - v2 = -e(u1 - u2)

Initial momentum (P) = Final momentum (P)

before the collision  P = m1u1 + m2u2

after collision  P = m1v1 + m2v2P = (0.625 kg * u1) + (0.0585 kg * u2)P

                           = (0.625 kg * v1) + (0.0585 kg * v2)

        Using the above two equations and the given coefficients of restitution, we can find the velocity of the balls after collisionv1 = (m1u1 + m2u2 + e * m2 * (u2 - u1)) / (m1 + m2)v2 = (m1u1 + m2u2 + e * m1 * (u1 - u2)) / (m1 + m2)

     Here, m1 = mass of basketball

                     = 0.625 kg,

                m2 = mass of tennis ball

                      = 0.0585 kg,

  u1 = 0, u2 = 0P = m1v1 + m2v2 => v1 + v2 = P / (m1 + m2)

Also given that the time taken by the balls to meet is 0.15 seconds

Let h be the height to which the tennis ball bounces after the collision.

When the tennis ball bounces to height h, it gains potential energy.

KE + PE = Total energy

             = Constant Using the principle of conservation of energy we can find the height to which the tennis ball bounces after collision(1/2) * m2 * v2² + (1/2) * m2 * g * h

              = (1/2) * m2 * u2² + (1/2) * m2 * g * 0(1/2) * m2 * v2²

              = (1/2) * m2 * u2² - (1/2) * m2 * g * h(1/2) * v2²

              = (1/2) * u2² - g * h

Substituting the values of u1, u2, m1, m2, e, t and g, we get:

v1 = (0 + 0.0585 kg * 9.81 m/s² + 0.9 * 0.0585 kg * (0 - 0)) / (0.625 kg + 0.0585 kg)v1

   = 1.96 m/sv2

    = (0.625 kg * 0 + 0 + 0.9 * 0.625 kg * (0 - 0)) / (0.625 kg + 0.0585 kg)v2

    = 5.5 m/s

Here, u1 = u2 = 0.

Using the above equation, we can find the height to which the tennis ball bounces after collision (1/2) * (0.0585 kg) * (5.5 m/s)² = (1/2) * (0.0585 kg) * (0 m/s)² - (0.0585 kg) * 9.81 m/s² * h12.83 J

                = -0.286 J - 0.572 h0.572 h

                = -12.83 J / 2h

                = -12.83 J / (2 * 0.572)

                = 11.2 m

Hence the height to which the tennis ball bounces above the ground after the collision is 11.2 m.

#SPJ11

Learn more about basketball is dropped and the coefficient of restitution at: https://brainly.com/question/19339515

Dan’s mistake is that he said the probability of Deshawn not doing basketball or not talking to friends after school is 35% which is not true.

Given:

Let’s consider the probability of Deshawn not doing basketball after school:Probability of Deshawn not doing basketball after school = 100% - Probability of Deshawn doing basketball after school= 100% - 20% = 80%

Similarly, let’s consider the probability of Deshawn not talking to friends after school: Probability of Deshawn not talking to friends after school = 100% - Probability of Deshawn talking to friends after school= 100% - 45% = 55% Probability of Deshawn doing neither basketball nor talking to friends after school:Probability of Deshawn not doing basketball after school * Probability of Deshawn not talking to friends after school= 80% * 55% = 44%

The probability of Deshawn doing either basketball or talking to friends after school is 65%, and the probability of Deshawn doing neither basketball nor talking to friends after school is 44%, which is greater than 35% which is Dans mistake. Hence, Dan’s mistake is that he said the probability of Deshawn not doing basketball or not talking to friends after school is 35% which is not true.

See more about probability at: https://brainly.com/question/24756209

#SPJ11

Answer:3 1 /20

Step-by-step explanation:= 1+3/4+1+3/10

The set [1 0 −3 , −3 1 6 , 1 −1 0] is not a basis for set of real numbers R cubed(ℝ3).

The reason why it is not a basis is because it is not linearly independent. However, the set does span set of real numbers R cubed(ℝ3).To determine if the given set is a basis for set of real numbers R cubed(ℝ3), we need to test for linear independence and for span.Linear independence

The given set is said to be linearly independent if and only if the only solution to the equation a[1 0 −3] + b[−3 1 6] + c[1 −1 0] = [0 0 0] is the trivial solution where a, b and c are constants.If the given set is linearly independent then it is a basis for R3; if it is not linearly independent, it is not a basis for R3.

SpanThe given set is said to span R3 if every vector in R3 can be written as a linear combination of vectors in the given set.

If the given set spans R3, then it can be considered a basis for R3.For us to test if the given set is linearly independent, we can form a matrix by placing the three given vectors into the columns of a 3 x 3 matrix as follows:[1 0 1] [−3 1 −1] [−3 6 0]

By expanding the determinant of the matrix above, we get: det(A) = 0 - 0 - (-3) = 3

Since the determinant is non-zero, we can say that the given set is linearly independent. Since the given set is linearly independent, we can then use it to span R3. Hence the given set does not form a basis for R3 but it is linearly independent and spans R3.

To know more about linearly independent click on below link:

https://brainly.com/question/30720942#

#SPJ11

Option (A) x+1 is a positive odd integer.

Given that, x < y < z and all three are consecutive non-zero integers.Let the first number be x, then the other two consecutive non-zero integers will be (x+1) and (x+2).To find out the positive odd integer among these, let us take each of them and verify if they are positive odd integers.∴ x+1 is odd, x+2 is even∴ x+1 is the only positive odd integer out of the three.

Learn more about Non-zero integers

brainly.com/question/2032387

#SPJ11

The sample size cannot be determined from this information alone. A confidence interval for a population mean is calculated based on the mean of a sample, the sample size, and the standard deviation.

Deviation is the difference between the expected value or average of a set of data and the actual value. For example, if the average of a set of numbers is 10 and one of the numbers is 15, the deviation of that number is 5. Deviation is a measure of how much variation exists in a set of data. It is an important tool used to measure the accuracy of a data set and identify outliers within that data set. Deviation is also used to measure the volatility of a stock or other investment, which is a measure of how much its price changes over time.

Therefore, to determine the sample size, the mean, standard deviation, and confidence interval of the sample must all be known.

To learn more about deviation

https://brainly.com/question/12402189

#SPJ1

The sample size cannot be determined from this information alone. A confidence interval for a population mean is calculated based on the mean of a sample, the sample size, and the standard deviation.

Deviation is the difference between the expected value or average of a set of data and the actual value. For example, if the average of a set of numbers is 10 and one of the numbers is 15, the deviation of that number is 5. Deviation is a measure of how much variation exists in a set of data. It is an important tool used to measure the accuracy of a data set and identify outliers within that data set. Deviation is also used to measure the volatility of a stock or other investment, which is a measure of how much its price changes over time.

Therefore, to determine the sample size, the mean, standard deviation, and confidence interval of the sample must all be known.

To learn more about deviation
brainly.com/question/12402189
#SPJ1

Complete Question:
A 95% confidence interval for a population mean was reported to be 152 to 160. If s 15, what sample size was used in this study?

The largest rectangular box in the first octant with three faces in the coordinate planes and one vertex in the plane x + 3y + 4z = 9 has dimensions x = 1.5, y = 1, and z = 2.25, with a maximum volume of 3.375 cubic units.

To find the largest rectangular box in the first octant with three faces in the coordinate planes and one vertex in the plane x + 3y + 4z = 9, we can use the method of Lagrange multipliers.

Let the sides of the rectangular box be represented by the variables x, y, and z. We want to maximize the volume V = xyz subject to the constraint x + 3y + 4z = 9.

The Lagrangian function is then given by L = xyz + λ(x + 3y + 4z - 9).

Taking the partial derivatives of L with respect to x, y, z, and λ, and setting them equal to zero, we get:

yz + λ = 0

xz + 3λ = 0

x*y + 4λ = 0

x + 3y + 4z - 9 = 0

Solving these equations simultaneously, we get:

x = 1.5, y = 1, z = 2.25, and λ = -0.5625

Therefore, the maximum volume of the rectangular box is V = 1.512.25 = 3.375 cubic units.

To learn more about coordinate planes

https://brainly.com/question/13611766

#SPJ4

The weight of the package is 56 using arithmetic operations.

Mathematicians use multiplication to calculate the product of two or more integers. It is a fundamental operation in mathematics that is frequently used in everyday living. When we need to combine sets of similar sizes, we use multiplication. The fundamental concept of repeatedly adding the same number is represented by the process of multiplication. The results of multiplying two or more numbers are known as the product of those numbers, and the factors that are compounded are referred to as the factors. Repeated adding of the same number is made easier by multiplying the numbers.

let weight of package be= x

x*5/7=40

x=(40*7)/5

x=56

To know more about multiplication, visit

https://brainly.com/question/5992872

#SPJ1

The required volume of the shape is [tex]\frac{850\pi}{3}$[/tex] cubic units.

A measurement of three-dimensional space is volume. It is frequently expressed mathematically using SI-derived units, as well as different imperial or US-standard units. Volume and the definition of length are linked.

First, let's find the volume of the cylinder:

[tex]$$V_{cylinder} = \pi r^2 h = \pi (5)^2 (8) = 200\pi$$[/tex]

Next, let's find the volume of the hemisphere:

[tex]$V_{hemisphere} = \frac{2}{3}\pi r^3 = \frac{2}{3}\pi (5)^3 = \frac{250\pi}{3}$$[/tex]

To find the volume of the entire shape, we simply add the volume of the cylinder and hemisphere:

[tex]$$V_{shape} = V_{cylinder} + V_{hemisphere} = 200\pi + \frac{250\pi}{3} = \frac{850\pi}{3}$$[/tex]

Therefore, the volume of the shape is [tex]\frac{850\pi}{3}$[/tex] cubic units.

To know more about Volume visit:

brainly.com/question/12237641

#SPJ1

Step-by-step explanation:

4x + y^2 + 2y =  - 5

4x = - y^2 -2y - 5          

4x = - (y^2 + 2y)   - 5      'complete the square' for y

4x = - ( y +1)^2   + 1    - 5

 x = - 1/4 ( y+1)^2  - 1             vertex is at -1, -1

-14x+2y^2-8y -20 = 0

14x = 2y^2 -8y-20

14x = 2 ( y^2 - 4y) - 20     complete the square for y

14x = 2(y-2)^2  -8 - 20

x = 1/7 ( y-2)^2 - 2                Vertex is at   -2 , 2

The total number of pairwise comparisons for k is (k*(k-1))/2.

There are (k*(k-1))/2 pairwise comparisons in a completely randomized design with k treatments. For example, if there are 4 treatments, there will be 6 pairwise comparisons (4C2 = 6). Here's the explanation:In a completely randomized design, the treatments are randomly assigned to the experimental units. The main objective of such a design is to determine whether the treatment means are different from each other or not.To compare the treatment means, we use the mean square between treatments (MST) and mean square error (MSE). The test statistic used to compare the means is F = MST/MSE.The ANOVA table for a completely randomized design has the following format:Source of variationSum of SquaresDegrees of freedomMean SquareF-testtreatmentSS(k-1)k-1MST=MSTrMSEResidualSSTn-kMSEReference: https://www.stat.yale.edu/Courses/1997-98/101/anovar.htmNow, we need to compare each pair of treatments using a multiple comparisons procedure. A pairwise comparison involves comparing the means of two treatments only.The total number of pairwise comparisons is given by the combination formula:$$ \frac{k!}{2!(k-2)!} = \frac{k(k-1)}{2} $$Therefore, the total number of pairwise comparisons for k is (k*(k-1))/2.

Learn more about pairwise

brainly.com/question/30882986

#SPJ11

The measure of the angle that it is complementary which is represented by 90-x is always true. Option A

An acute angle is simply defined as an angle that measures from 90° and 0°. This means that it is smaller than a right angle.

It is formed in the space between two intersecting lines or planes, or from the intersection of two shapes.

A complementary angle can be defined as a pair of angles whose sum is equal or equivalent to 90 degrees.

From the information given, we have that;

x is the acute angle

The complementary angle is 90 - x

We can see that the angle x must be complementary to be subtracted from 90 degrees.

Learn about acute angles at: https://brainly.com/question/28958927

#SPJ1

The complete question:

If the measure of an acute angle is represented by x, then the measure of its complement is represented by 90 – X.

always true

sometimes true

never true

The definition of vector space that fails is part A and B  because it does not satisfy the any property of vector space.

The following statement can be determined if at-least one part of vector space definition that fails as:

(a) A is not a vector space because it does not contain the zero vector.

The zero vector is the unique vector that satisfies the property that when it is added to any other vector in the space, the result is the original vector.

However, in this case, the [a1, b1] + [a2, b2] = [a1 - a2, b1 - b2] is 0x² + 1, which is not an element of A. Therefore, A fails to satisfy the requirement of having a zero vector, and it is not a vector space.

(b) B is not a vector space because it does not satisfy the distributive property of scalar multiplication over vector addition.

In general, scalar multiplication must distribute over vector addition, meaning that for any scalar a and any vectors u and v in the space, a(u+v) = au + av.

However, in B, the scalar multiplication is defined as usual for R², but the vector addition is defined differently. In particular,[a1, b1] + [a2, b2] = [a1 - a2, b1 - b2].

The vector space definition fails because the vector addition is not associative, and it is also not commutative, which are the first two conditions for vector spaces. Therefore, the first and second conditions of the definition are not met.

To learn more about the vector space:

https://brainly.com/question/11383

#SPJ11

By answering the presented question, we may conclude that Therefore, the solution to the system of equations is: x = 36/31 and y = 57/31.

In mathematics, an equation is a statement stating the equivalence of two expressions. An equation generally made up of two sides delimited by a system of equations (=). For example, the argument "2x + 3 = 9" states that the word "2x Plus 3" equals the integer "9". The objective of equation solving is to identify the amount or amounts of the variables ( independent variables) that will allow this equation to really be true. Mathematics can be simple or complex, regular or quadratic, and contain one or more parts. In the equation "x2 + 2x - 3 = 0," for illustration, the variable x is elevated to the second power. Lines are employed in numerous different fields of mathematics, including arithmetic, calculus, and geometry.

From the given system of equations, we have:

[tex]8x + 7y = 17 ...(1)\\x - 3y = -5 ...(2)\\x = 3y - 5 ...(3)\\8(3y - 5) + 7y = 17\\24y - 40 + 7y = 17\\31y = 57\\y = 57/31\\x = 3(57/31) - 5\\x = 36/31[/tex]

Therefore, the solution to the system of equations is:

x = 36/31 and y = 57/31.

To know more about equation visit:

https://brainly.com/question/649785

#SPJ1

The solution to the system of equations is: x = 36/31 and y = 57/31.

In mathematics, an equation is a statement stating the equivalence of two expressions. An equation generally made up of two sides delimited by a system of equations (=). For example, the argument "2x + 3 = 9" states that the word "2x Plus 3" equals the integer "9". The objective of equation solving is to identify the amount or amounts of the variables ( independent variables) that will allow this equation to really be true. Mathematics can be simple or complex, regular or quadratic, and contain one or more parts. In the equation [tex]"x^2 + 2x - 3 = 0,[/tex]" for illustration, the variable x is elevated to the second power. Lines are employed in numerous different fields of mathematics, including arithmetic, calculus, and geometry.

From the given system of equations, we have:

[tex]$\begin{aligned} & 8 x+7 y=17 \ldots(1) \\ & x-3 y=-5 \ldots(2) \\ & x=3 y-5 \ldots(3) \\ & 8(3 y-5)+7 y=17 \\ & 24 y-40+7 y=17 \\ & 31 y=57 \\ & y=57 / 31 \\ & x=3(57 / 31)-5 \\ & x=36 / 31\end{aligned}$[/tex]

Therefore, the solution to the system of equations is:

x = 36/31 and y = 57/31.

To know more about equation visit:

brainly.com/question/649785

#SPJ1

Answer:

Step-by-step explanation: In the problem, they tell us that

dL / dt = 7 cm/s (the rate at which the length is changing) and

dw / dt = 8 cm/s (the rate at which the width is changing)

Want dA/dt (the rate at which the area is changing) when L = 7 cm and w = 5 cm

The equation for the area of a rectangle is:

A = L·w, so will need the product rule when taking the derivative.

dA/dt = L (dw/dt) + w (dL/dt)

Now just plug in all of the given numbers:

dA/dt = (7)(7) + (5)(8) = 49+40 = 89  cm²/s

Answer:

54

Step-by-step explanation:

Add six each time -> 24 + 6 = 30 + 6 = 36 etc

Roy purchased whole pizzas for P 190.00 each. To determine the number of whole pizzas he bought, we can divide the total cost of the pizzas by the cost of each pizza. Therefore, the calculation P 950.00 / P 190.00 results in 5, indicating that Roy bought five whole pizzas.

Roy spent a total of P 1070 for pizza with 3 sets of additional toppings. Since each set of additional toppings costs P 40.00, then the total cost of the toppings is 3 x P 40.00 = P 120.00. Subtracting this from the total amount spent gives us P 950.00, which is the cost of the pizzas alone.

Since each whole pizza costs P 190.00, we can divide the cost of the pizzas by the cost of each pizza to find the number of whole pizzas Roy bought. Therefore, P 950.00 / P 190.00 = 5.

Thus, Roy bought 5 whole pizzas.

Learn more about arithmetic here: brainly.com/question/11559160

#SPJ4

Answer:

We know that, the sum of interior angles of an n-sided polygon is (n−2)×180⁰

For a pentagon, n=5

so,

[tex] \implies \rm \: 6x + 6y = (n - 2)180[/tex]

[tex] \implies \rm \: 6(x + y) = (5 - 2)180[/tex]

[tex] \implies \rm \: 6(x + y )= 3 \times 180[/tex]

[tex] \implies \rm \: (x + y) = \dfrac{3 \times 180}{6} [/tex]

[tex] \implies \rm \: (x + y) = \dfrac{ 3 \times \cancel{180} \: \:30}{ \cancel6} [/tex]

[tex] \rm \implies \: x + y = 90[/tex]

[tex] \underline{\boxed{\implies \rm \: y= 90 - x}}[/tex]

There are many formulas related to a pentagon. A few basic ones are given below.

Leo might therefore have 36 or 48 toy soldiers, which is a choice between the two numbers.

The attempt to demonstrate that your integer is larger than anyone else's integer has persisted through the ages, despite their being more numbers than there are atoms in the universe. The largest number that is frequently used is a googolplex (10googol), which equals 101¹⁰⁰.

We'll name Leo's collection of toy soldiers "x" the amount. We are aware of:

We can infer x to be one of the following figures from the first condition: 28, 32, 36, 40, 44, 48, or 52.

To find out which of these integers meets the other two requirements, we can try each one individually:

x + 6 = 34 and x + 3 = 31, neither of which is a multiple of five, if x = 28.

X + 6 = 38 and X + 3 = 35, none of which is a multiple of 5, follow if x = 32.

When x = 36, x + 6 = 42, a multiple of 7, and x + 3 = 39, a multiple of 5, follow. This might be the answer.

x + 6 = 46 and x + 3 = 43, neither of which is a multiple of five, if x = 40.

x + 6 = 50 and x + 3 = 47, neither of which is a multiple of five, if x = 44.

When x = 48, x + 6 = 54, a multiple of 7, and x + 3 = 51, a multiple of 5, follow.

x + 6 = 58 and x + 3 = 55, neither of which is a multiple of five, if x = 52.

To know more about two numbers visit:-

https://brainly.com/question/1814627

#SPJ1

Maria's capital gain is 55.21%. Rounded to the nearest tenth of a percent, this is 55.2%.

To determine Maria's capital gain as a percent, we need to calculate the difference between the selling price and the purchase price, and then express this difference as a percentage of the purchase price.

The purchase price for 1,000 shares of stock was:

$35.50 x 1,000 = $35,500

The selling price for 1,000 shares of stock was:

$55.10 x 1,000 = $55,100

The capital gain is the difference between the selling price and the purchase price:

$55,100 - $35,500 = $19,600

To express this gain as a percentage of the purchase price, we divide the capital gain by the purchase price and multiply by 100:

($19,600 / $35,500) x 100 = 55.21%

In summary, to calculate the percent capital gain from the purchase and selling price of a stock, we simply divide the difference between the two prices by the purchase price and multiply by 100.

To learn more about capital gain click on,

https://brainly.com/question/28628208

#SPJ4

The equation representing total fraction strip is  ³/₃ + ¹/₃ = ⁴/₃.

option B.

A fraction is a mathematical representation of a part of a whole or a ratio between two numbers. It consists of a numerator, which represents the number of parts being considered, and a denominator, which represents the total number of parts in the whole.

For this case, 1 is divided into, and 1 divide into 3.

To obtain the total fractions, we will add the individual fractions as shown below;

For this first fraction = ¹/₃ + ¹/₃ + ¹/₃

For the second fraction = ¹/₃

Total fraction = 3(¹/₃ + ¹/₃ + ¹/₃) + ¹/₃

Total fraction = ³/₃ + ¹/₃ = ⁴/₃

Learn more about total fraction here: https://brainly.com/question/28699958

#SPJ1

Answer:

A survey found that 34% of the students spend time with your family eating dinner. Oh the 500 student surveyed, about how many spend time with their family eating dinner?

Step-by-step explanation:

If 34% of the students surveyed spend time with their family eating dinner, we can find the approximate number of students who do so by multiplying the percentage by the total number of students surveyed:

34% of 500 students = 0.34 x 500 = 170 students

Therefore, about 170 of the 500 students surveyed spend time with their family eating dinner.

If you can, give me brainliest please!

The rounded value of 25.71 to 2 decimal places is 25.71 itself.

To round 25.71 to 2 decimal places, we need to look at the third decimal place, which is 1.

If the third decimal place is 5 or greater, we round up the second decimal place. If the third decimal place is less than 5, we simply drop it and keep the second decimal place as is.

In this case, the third decimal place is 1, which is less than 5, so we simply drop it and keep the second decimal place as is. Therefore, 25.71 rounded to 2 decimal places is:

25.71 ≈ 25.71 (no rounding necessary)

So, the rounded value of 25.71 to 2 decimal places is 25.71 itself.

Learn more about decimal at https://brainly.com/question/703656

#SPJ1