Explanation:
The mass of a pot is 300g and contains 90% aluminum. Find the number of moles of aluminum in the pot. P.A. (Al = 27)
The mass of aluminum present in the pot is:
[tex]300 g * 90/100\\=270 g[/tex]
Hence, in the given pot 270g Al is present.
[tex]Number of moles of Al=\frac{given mass ofAl}{its molar mass}[/tex]
The gram atomic mass of Al -27 g/mol
Given the mass of Al is 270 g
Substitute these values in the above formula:
[tex]Number of moles of Al=\frac{given mass ofAl}{its molar mass}\\=\frac{270 g}{27 g} \\=10.0 mol[/tex]
Answer is 10.0 mol of Al is present.
Over a period of 2 minutes, 180 coulombs of charge pass through a resistor. What is the current through the resistor during this time?
Type the correct answer in the box. Use numerals instead of words.
The current through the resistor during this time is
A.
Answer:
Explanation:
Formula
The current = charge / time
The charge is in coulombs
The time has to be in seconds.
1 minute = 60 seconds
2 minutes = 120 seconds.
charge = 180 coulombs
current = 180 / 120
current = 1.5 amperes.
What is the percent yield of a reaction?
O A. The difference between measured and calculated amounts
OB.
The amount of produd obtained
amount possible
* 100
C. The amount of product actually obtained in a reaction
D. The amount of product that is possible from a reaction
Answer:
B. The amount of produd obtained/amount possible * 100
Explanation:
In chemistry, the yield of a chemical reaction is the quantity or amount of products obtained in that chemical reaction. It is calculated by using the following formula:
Percentage yield = Actual yield/theoretical yield × 100
- The actual yield is the amount of products got from a chemical reaction
- The theoretical yield is the amount of product got from using the balanced equation (stoichiometry).
CORRECT ANSWER ONLY ND WILL GIVE BRAINLIEST✌
Calculate the mass of nitrogen dioxide gas that would occupy
the same volume as 10g of hydrogen gas at ē same pressure and temperature
(H= 1.0 N = 14.0 O= 16.0) GAS LAWS/MOLES
Answer:
150g
Explanation:
Assuming they are ideal gases at the same temperature and pressure, equal moles of gasses have equal volume. IN this case, if we have 10g of hydrogen gas, that is 5 moles of H2 gas. That means 5 moles og NO2 will occupy the same volume which is 5*(14.0 + 16.0*2) = 230 g
What happens if kinetic energy of a gas is lowered
Answer:
"If you lower the kinetic energy of a gas its temperature will decrease because temperature is a measure of the average kinetic energy of a substance."
Explanation:
Which pair of substances would react the
fastest?
a. Copper sheet and concentrated
nitric acid.
b. Copper powder and dilute nitric acid
C. Copper powder and concentrated
nitric acid.
Answer:
C. It has the highest rate of reaction. Copper has the highest TSA/V and concentrated nitric acid has huggest num of solute
For a reaction: aA → Products, [A]o -4.3 M, and the first two half-lives are 56 and 28 minutes, respectively. Calculate k (without units). Show Work!
A. 7.7 x 10^-2
B. 4.2 x 10^-3
C. 3.8 x 10^-2
D. 8.3 x 10^-3
E. None of these
Answer:
C.[tex]3.8\times 10^{-2}[/tex]
Explanation:
We are given that
Initial concentration, [tex][A]_o=4.3 M[/tex]
First half life, [tex]t_{\frac{1}{2}}=56[/tex]minutes
Second half life, [tex]t'_{\frac{1}{2}}=28[/tex]minutes
We have to find K.
The given reaction is zero order reaction.
We know that for zero order reaction
[tex]t_{\frac{1}{2}}=\frac{[A]_o}{2k}[/tex]
Using the formula
[tex]56=\frac{4.3}{2k}[/tex]
[tex]k=\frac{4.3}{2\times 56}[/tex]
[tex]k=3.8\times 10^{-2}[/tex]
Hence, option C is correct.
Zero-order reactions are the reactions when a surface or a catalyst is required for the reaction to proceed and is saturated by the reactant chemicals. The result of the concentration versus the time plot will be a straight line in a zero-order reaction.
[tex]3.8 \times 10 ^{-2}[/tex] is the value of k.
How to calculate the value of k?Given,
Initial concentration [tex][A_{0}][/tex] = 4.3 MThe first half-life of the reactant [tex](t \dfrac{1}{2})[/tex] = 56 minutesThe second half-life of the reactant [tex](t \dfrac{1}{2})[/tex] = 28 minutesThe given reaction in the question is of zero-order and for that, we know that,
[tex]t \dfrac{1}{2} = \dfrac{[A_{0}] }{2\;\rm k}[/tex]
Substituting the values in the equation we get:
[tex]\begin{aligned}56 &= \dfrac{4.3 }{2\; \rm k}\\\\\rm k &= {4.3 }{2 \times 56}\\\\\rm k &= 3.8 \times 10^{ -2}\end{aligned}[/tex]
Therefore, option C is correct.
Learn more about the zero-order reaction here:
https://brainly.com/question/4638382
Which is a mixture?
Sodium metal
chlonne gas
sodium metal and chlonne gas
sodium chlonde (salt) and water
Answer:
I believe it's salt and water
Explanation:
not sure
Answer:
Mixture is a electronic device used to peel the things such as onion ,tomato,ginger, garlic etc.
If an atom contains more
electrons than protons, it is
Answer:
If an atom has the same number of electrons as protons, it is a neutral atom.
Explanation:
______ exhibits the highest
intermolecular forces of the states of matter.
A. Solid
B. Liquid
C. Gas
D. Vacuum

when carbon is heated in a limited supply of oxygen, a gas is obtained.
1 .what is the name of this gas
Answer:
carbon monoxide
I think its correct but I am not sure
Answer: when carbon is heated in air carbon dioxide is formed, so is incomplete combustion which results in carbon monoxide.
Explanation: but when carbon dioxide reacts with more oxygen carbon monoxide is formed i guess.
I AM A BIT SURE BUT HOPE THIS HELPSSSS!!!!
Based on the Lewis/electron dot representation
of the two atoms, predict the ratio of metal
cationic (+) atom to nonmetal anionic (-) atom in
the compound.
.Ca.
.P.
A. 1:1
B. 3:2
C. 2:1
D. 3:1
Can someone plz tell me how to do this.
Answer:
B or C think so
To begin the experiment, Xavier washed his hands and put on safety goggles. He then measured 120 milliliters of tap water, 2.5 milliliters of baking soda, and 2.5 milliliters of citric acid. The initial temperature of the water was 23.5°C.
Next Xavier added the baking soda and citric acid to the water. The mixture immediately began to bubble vigorously, which lasted for about 30 seconds. The new temperature of the mixture was 17.7°C.
Is a chemical reaction taking place during Xavier’s experiment? How do you know?
WILL GIVE BRAINLIEST!!!!!!!!!!!!!!!
Answer:
Yes a chemical reaction is taking place.
Explanation:
There is a change in temperature along with bubbling. All signs of a chemical reaction.
help please i am confused
It is pholem or phloem
Answer:
phloem I believe
Explanation:
dictionary
Sodium and chlorine combine to form table salt.
2Na(s) + Cl2(g) → 2NaCl(s)
Does this reaction obey the law of conservation of mass?
Answer:
yes it does
Explanation:
because the ratios on the reactants and products are equal
The reaction 2Na(s) + Cl₂(g) → 2NaCl(s) obeys the law of conservation of mass.
Yes, this reaction obeys the law of conservation of mass. The law of conservation of mass states that mass is neither created nor destroyed in a chemical reaction; it is only rearranged.
In the given reaction, we have 2 sodium atoms (Na) on the left side and 2 sodium atoms (Na) on the right side. Similarly, we have 2 chlorine molecules (Cl₂) on the left side and 2 chlorine atoms (Cl) on the right side. Therefore, the number of atoms of each element is balanced on both sides of the reaction.
Additionally, the total mass of the reactants (2Na + Cl₂) is equal to the total mass of the product (2NaCl). The coefficients in the balanced equation represent the stoichiometric ratios, ensuring that the mass is conserved.
Hence, the reaction 2Na(s) + Cl₂(g) → 2NaCl(s) obeys the law of conservation of mass.
Learn more about law of conservation of mass from the link given below.
https://brainly.com/question/28711001
#SPJ2
CH3 CH2 CH2 OH + H2SO4
Get the product and answer the following questions :
I. A + HCl
II. A --> Combustion ( what product does it form. Write out the equation )
III.A ---> Hydrogenation (what product does it form. Write out the equation )
Note : A represents the product gotten from the reaction between
CH3 CH2 CH2 OH and H2SO4
Answer:
propene and hydrogen is product
When propanol is heated with concentrated sulphuric acid at 443 K, dehydration takes place and prop-1-ene is formed. In this reaction concentrated sulphuric acid acts as a dehydrating agent.
I. A + HCl gives )-gives 2-chloropropane
II. A --> Combustion ( what product does it form. Write out the equation propene ozonide
III.A ---> Hydrogenation (what product does it form. Write out the equation )propanol
movement of water molecules without the use of energy
The answer is ‘Passive Transport’
movement of molecules without the use of energy is due to the shrinkage of water
Is the graph more accurate with more atoms or less atoms?
Answer:
I would guess more atoms? but there is no graph attached
what is the atomicity of Sulphur?
Answer:
the atomicity of sulphur is 8
Explanation:
hope it helps
mendeleev's periodic table is studied even though it is considered to be defective
Answer:
This is because Mendeleev arranged the elements in order of increasing relative atomic mass.
Explanation:
Dmitri Mendeleev is one of the scientists that contributed to the development of periodic table in chemistry. He was able to organise elements into rows according to their atomic mass and into columns based on chemical and physical properties. This is the main reason why his periodic table is still studied even though it has some defects which include:
--> Grouping of elements that are not similar chemically: For example Copper and Silver bear no resemblance with the alkali metals, but they have been placed together in the first group.
--> Position of isotopes: According to his periodic table: Isotopes of an element must be given separate places in the periodic table because they have different atomic masses.
--> Electronic arrangement of elements: It failed to explain the electronic arrangement of elements.
--> Separation of chemically similar elements:
Elements that are chemically similar such as Gold and Platinum have been placed in separate groups.
phosphorus react with carbon
Answer:
Phosphorus atoms can bond with oxygen atoms to form ester groups. These can bond with carbon atoms, yielding a large number of organic phosphorus chemicals. These are found in many important biological processes
Help me please
The options are
A. Translation
B. Rotation
C. Enlargement
D.reduction
Answer:
C. Enlargement
Explanation:
Which of the following are true for an element? (i)Atomic number= number of protons + number of electrons (ii)Mass number = number of protons+ number of neutrons (iii)Atomic mass= number of protons= number of neutrons (iv)Atomic number = number of protons = number of electrons
Answer:
ii and iv
Explanation:
atomic mass is the sum of protons and neutrons
protons ( postively charged) usually have the same number like electrons( negatively charged)
Which of the following about a balanced chemical reactions is
NOT true?
O A properly written chemical equation will include the states of matter
for every substance in the reaction.
O The number of atoms of each element must be the same for both
reactants and products.
A balanced chemical equation must follow the Law of Conservation
of Matter
A balanced chemical equation must always include coefficients on
every reactant and product.
Answer:
A balanced chemical equation must always include coefficients on every reactant and product.
Explanation:
A balanced chemical equation does not need to include coefficients on every reactant and product.
For example, below is a balanced chemical equation in which the reactants and the products have no coefficients whatsoever:
NaOH(aq) + HCl (aq) -----> NaCl (s) + H2O (l)
Of course, a properly written chemical equation must include the states of matter of all the substances in the reaction and the number of atoms of each element must balance both in the reactant and product sides of the equation. Generally, a balanced chemical equation must obey the law of conservation of matter which opines that matter can neither be created nor destroyed but can only be converted from one form to another.
Hence, that a balanced chemical equation must always include coefficients on every reactant and product is not true.
Element 'X' forms a chloride with the formula XCl2, which is a solid with high melting point. X would most likely be in the same group of the periodic table as:
I) Si
2) Al
3) Mg
4) Na
pls pls answer fast
Answer:
Mg
Explanation:
Mg forms 2+ ions and mgcl2 has a melting point over 700°C I believe.
PLZ HELL ME WITH MY WORK
Answer:
Ba
Explanation:
1. Necesitas un "cubo concentrado" (de esos que se usan para sazonar las comidas Maggie, ricostilla) dos vasos de vidrio o plástico y agua (caliente y fría). 2.Agrega al vaso con agua fria la mitad de un cubo concentrado y déjala reposar unos minutos. Prepara el segundo vaso con agua caliente y agrégale la otra mitad del cubo. 3. Argumenta tus observaciones en relación con lo observado y con la teoria vista. ¿Como influye la temperatura en este experimento?
Describe how you would prepare a supersaturated solution
Answer:
A supersaturated solution contains more dissolved solute than required for preparing a saturated solution and can be prepared by heating a saturated solution, adding more solute, and then cooling it gently. Excess dissolved solute crystallizes by seeding supersaturated solution with a few crystals of the solute.
Explanation:
Cual es la longitud de onda de un foton emitido durante la transicion desde el stado n=5 al estado n=3 en atomo Hidrogeno? Dar como respuesta de la longitud de onda en nm (nanometros)
Answer:
1302 nm
Explanation:
Del formulario de Rydberg para longitud de onda
1 / λ = R (1 / nf ^ 2 - 1 / ni ^ 2)
1 / λ = 1.097 × 10 ^ 7 (1/3 ^ 2 - 1/5 ^ 2)
1 / λ = 1.097 × 10 ^ 7 (0.11 - 0.04)
1 / λ = 1.097 × 10 ^ 7 (0.07)
= 1,302 × 10 ^ -6 m
o 1302 nm
Name the following compound NiBr2?
Answer:
the Name of NiBr2 is
Nickel(II) bromide
Identifica las formas de energía mecánica
(cinética y potencial) que tienen lugar en diferentes puntos del movimiento en
un sistema mecánico (caída libre, montaña rusa, péndulo).
2 Tipos de Energía Mecánica
2.1 1. Energía hidráulica
2.2 2. Energía eólica
2.3 3. Energía Mareomotriz
3 Ejemplos de Energía Mecánica
3.1 1. Planta hidroeléctrica
3.2 2. Máquinas de Vapor
3.3 3. Motor de Combustión interna
3.4 4. Molinos de Viento
3.5 5. Un Juego de Billar
3.6 6. Motor eléctrico
3.7 7. Locomotora
3.8 8. Bala
3.9 9. Una pistola de Dardos
3.10 10. Pelota sobre una mesa
https://www.aura-energia.com/ejemplos-de-energia-mecanica/
