Answer:nb mhvj
Explanation:
hvvmjhv
If the sum of the last
number and the middle
number of three consecutive
integersis is 71, then the
Least (smallest) number
mumber must be
Answer:
number must be 0000.999
Which of the following best describes an electron orbital? (electron orbital)
a) A circular path in which an electron "orbits” around a nucleus.
b) A location around the nucleus in a sphere where the electron is likely to be located.
c) An elliptical path around the nucleus.
d) The nucleus
Answer:
D
Explanation:
Difference between heavy chemicals and fine chemicals
Answer:
Fine chemicals are used as starting materials for specialty chemicals, particularly pharmaceuticals, biopharmaceuticals and agrochemicals. ... The term "fine chemicals" is used in distinction to "heavy chemicals", which are produced and handled in large lots and are often in a crude state.
Explanation:
What's the major difference between carbon and other group IV elements, excluding allotropy
Answer:
Carbon has an ability of catenation which other group IV elements lack.
Explanation:
Catenation is the ability for an element to form multiple bonds with other elements leading rise to long chains of compounds.
An example is organic compounds.
[tex].[/tex]
What is the rate law?
Answer: B
Explanation:
The rate law is the mathematical equation that describes how reactant concentration changes as a function of time. A law such as "Rate = k*[A]*[B]" means that, for each liter-equivalent of the reactant(s) A, there are k liters of reactant B. The law also dictates the molarity (and thus partial pressure) for each component in solution.
Would overheating be a stimulus or a
response?
Stimulus
Response
Answer:
stimulus response
Explanation:
its stimulus response
what is Planck's constant ??
Planck's constant =
6.62607004 × 10-34 m2 kg / s
Explanation:
Step by Step explanation
The Planck constant, or Planck's constant, is a fundamental physical constant denoted h, and is of fundamental importance in quantum mechanics. A photon's energy is equal to its frequency multiplied by the Planck constant. Due to mass–energy equivalence, the Planck constant also relates mass to frequency. Wikipedia
Answer:
The Planck constant, or Planck's constant, is a fundamental physical constant denoted h, and is of fundamental importance in quantum mechanics. A photon's energy is equal to its frequency multiplied by the Planck constant. Due to mass–energy equivalence, the Planck constant also relates mass to frequency.
Plancks constant =
6.62607004 × 10-34 m2 kg / s
pls mark me as brainliestwhich picture shows the particles in a compound?
picture I and II
picture I
picture III and IV
picture II
hi <3
compound are 2(or more) elements combined together
thus your answer will be picture I
hope this helps <3
Determine the molecular and empirical formulas of the following:
a. the organic solvent benzene, which has six carbon atoms and six hydrogen atoms.
b. the compound silicon tetrachloride, which has a silicon atom and four chlorine atoms and is used in the manufacture of computer chips.
c. the reactive substance diborane, which has two boron atoms and six hydrogen atoms
d. the sugar called glucose, which has six carbon atoms, twelve hydrogen atoms, and six oxygen atoms.
Answer:
the answer is b im pretty sure
Explanation:
sorry if im wrong
The empirical formula for benzene is CH. The molecular formula for benzene is C[tex]_6[/tex]H[tex]_6[/tex]. The empirical formula is also known as the simplest basic formula.
What is molecular formula ?A molecular formula is indeed a formula derived with molecules that corresponds to the total number of distinct atoms in the molecule of a chemical. A subscript inside a molecular formula denotes the number for each type of atoms in the substance's molecule.
The empirical formula provides the most basic formula for something like a compound, defined by the ratio between subscripts of the formula's smallest entire number of constituents. It is also known as the simplest basic formula. An empirical formula is the formula of a material given with the least integer subscript. The empirical formula for benzene is CH. The molecular formula for benzene is C[tex]_6[/tex]H[tex]_6[/tex].
Therefore, the molecular formula for benzene is C[tex]_6[/tex]H[tex]_6[/tex].
To learn more about molecular formula, here:
https://brainly.com/question/28647690
#SPJ6
When multiplying 602.4 m by 3.72 m, which value determines the number of significant figures in the answer? Explain.
The values that determines the number of significant figures in the answer is 3.72
In mathematics and science, a significant figure refers to any figure that contributes to the degree of accuracy of a value that is being measured.
The value having the value having the least number of significant figures in a multiplication determines the number of significant figures in the answer.
In this case, 3.72 has the least number of significant figures hence it determines the number of significant figures in the answer.
Learn more; https://brainly.com/question/13386983
Answer:
3.72
Explanation:
3.72 has the least number of significant figures which means the number of significant figures is the answer.
Chloric acid (HCIO3 is a neutral compound. The chlorine atom has what oxidation number?
Answer: 1
Explanation: one
Chloric acid is a neutral compound and an oxoacid with strong oxidizing power. In the compound (chloric acid), chlorine has an oxidation number of +5. Thus, option c is correct.
What is the oxidation number?The oxidation number is defined as electrons that are transferred by accepting and donating in a chemical bond formation. They denote the atoms that have gained and donated electrons by the positive and negative states.
As chloric acid is a neutral compound, the equivalent will be zero. The oxidation state of the hydrogen atom is generally taken as 1 and that of oxygen as -2 as it requires two more electrons in its valence shell.
The oxidation number will be estimated as,
HCIO₃ = 0
+1 + x + 3(-2) = 0
+1 + x - 6 = 0
x = + 6 - 1
x = + 5
Therefore, option c. chlorine has a +5 oxidation number in chloric acid.
Learn more about oxidation numbers, here:
https://brainly.com/question/3035498
#SPJ2
Pure substances can be elements or compounds. An element is a form of matter that cannot be broken down by chemical reactions into simpler substances. A compound is a substance composed of two or more different types of elements ,chemically combined in a fixed ratio. 2.(a) Elements and compounds are called as pure substances because it is made up of _________________ *
a.same kind of atoms or molecules
b. different kinds of atoms or molecules
c.heterogeneous mixtures
d.solutions
Answer:
a.same kind of atoms or molecules
Please help me please
Answer:
Hope this helps.
Explanation:
See the picture. Hope it helps. Sorry if i was incorrect.
and compound is a substance made of two or more chemicals that are chemically joined in a specific combination most matter is formed of ____
Answer:
elements
Explanation:
possibly elements
Is sodium hypochlorite a element, compound or a mixture?
Answer:
Sodium hypochlorite (commonly known in a dilute solution as bleach) is a chemical compound with the formula NaOCl or NaClO, comprising a sodium cation (Na+) and a hypochlorite anion (OCl−or ClO−). It may also be viewed as the sodium salt of hypochlorous acid.What is the mass of 5 mole of ammonia . Calculate the number of NH₃ molecules, nitrogen atom and hydrogen atoms in it..
Molar mass of NH_3
[tex]\\ \sf\longmapsto 14u+3(1u)[/tex]
[tex]\\ \sf\longmapsto 14u+3u[/tex]
[tex]\\ \sf\longmapsto 17g/mol[/tex]
We know.
No of moles=Given mass/Molar mass
[tex]\\ \sf\longmapsto Given\;Mass=17(5)[/tex]
[tex]\\ \sf\longmapsto Given \:Mass\:of\:NH_3=85g[/tex]
Now
Lets write the balanced equation
[tex]\\ \sf\longmapsto N_2+3H_2=2NH_3[/tex]
There is 2moles of Ammonia 3moles of H_21mole of N_2Now
[tex]\boxed{\sf No\:of\:Molecules =No\:of\;moles\times Avagadro\:no}[/tex]
For Hydrogen
[tex]\\ \sf\longmapsto 3\times 6.023\times 10^{23}[/tex]
[tex]\\ \sf\longmapsto 18.069\times 10^{23}[/tex]
[tex]\\ \sf\longmapsto 1.8\times 10^{22}molecules[/tex]
For Ammonia
[tex]\\ \sf\longmapsto 2\times 6.023\times 10^{23}[/tex]
[tex]\\ \sf\longmapsto 12.046\times 10^{23}[/tex]
[tex]\\ \sf\longmapsto 1.2\times 10^{22}molecules[/tex]
For Nitrogen
[tex]\\ \sf\longmapsto 1\times 6.023\times 10^{23}[/tex]
[tex]\\ \sf\longmapsto 6.023\times 10^{23}molecules[/tex]
In this list, which substance can be classified as a chemical?
Complete Question is attached below
We have that the Chemical is
Salt
From the Question we have options
Salt
Sleep
Sold
Heat
Temperature
Generally among est the options
Salt is the only chemical present as it is made of Sodium and chlorine compound
NaCl joined by an ionic bond
For more information on this visit
https://brainly.com/question/1689737?referrer=searchResults
13. Find the total number of atoms present in the following molecules. a. 5 H₂O b. Zn Cl₂
Please
Answer:
5H²O= 23
ZnCl²=135
have a great day
a sample of gas is originally at 12°C is heated so it's total kinetic energy doubles . what is the new temperature of the sample
wE know
[tex]\boxed{\sf E\propto T}[/tex]
Hence If Kinetic energy is doubled Temperature will also be doubled.
[tex]\\ \sf\longmapsto T=12(2)=24°C[/tex]
The kinetic energy is directly proportional to the temperature. Hence, as kinetic energy doubles, the temperature become approximately 297.15°C.
What is kinetic energy ?Kinetic energy is the energy generated by virtue of the motion of the substance.
Assuming the pressure and volume of the gas sample are constant, the temperature of an ideal gas is directly proportional to its average kinetic energy. When the total kinetic energy of the gas doubles, its temperature will also double.
To calculate the new temperature of the sample, we can use the following equation:
(T2/T1) = (E2/E1)
where T1 is the initial temperature, E1 is the initial total kinetic energy, T2 is the final temperature, and E2 is the final total kinetic energy.
Since the total kinetic energy has doubled, E2 = 2E1. Substituting this into the equation, we get:
(T2/T1) = 2
Multiplying both sides by T1, we get:
T2 = 2T1
Substituting the initial temperature T1 = 12°C + 273.15 K = 285.15 K, we get:
T2 = 2 x 285.15 K = 570.3 K
Converting the final temperature from Kelvin to Celsius, we get:
T2 = 570.3 K - 273.15 = 297.15°C
Therefore, the new temperature of the gas sample is approximately 297.15°C.
Find more on kinetic energy:
https://brainly.com/question/26472013
#SPJ2
How do I calculate the volume?
Answer:
2477.6 cm³
Explanation:
Volume = length x width x height
Label in cm³
A pycnometer is a glass apparatus used for accurately determining the density of a liquid. When dry and empty, a certain pycnometer had a mass of 27.056 g. When filled with distilled water at 25.0°C, it weighed 36.773 g. When filled with chloroform (a liquid once used as an anesthetic before its toxic properties were known), the apparatus weighed 41.451 g. At 25.0°C, the density of water is 0.99704 g/mL
Complete Question
A pycnometer is a glass apparatus used for accurately determining the density of a liquid. When dry and empty, a certain pycnometer had a mass of 27.056 g. When filled with distilled water at 25.0°C, it weighed 36.773 g. When filled with chloroform (a liquid once used as an anesthetic before its toxic properties were known), the apparatus weighed 41.451 g. At 25.0°C, the density of water is 0.99704 g/mL
-What is the volume of the pycnometer (mL)
We have that the volume of the pycnometer in mL is
[tex]V=9.111mL[/tex]
From the Question we are told that
Pycnometer mass of [tex]m_p=27.056 g.[/tex]
Temperature [tex]T=25 \textdegree[/tex]
Pycnometer filled with distilled water [tex]m_{pf}= 36.773 g[/tex]
Apparatus weighed [tex]w=41.451 g[/tex]
Density of water [tex]\rho= 0.99704 g/mL[/tex]
Generally the equation for Density is mathematically given as
[tex]\rho=\frac{mass}{Volume}[/tex]
Since pycnometer is filled with water its volume can be defined by the volume of water in it
Therefore
Mass of water Pycnometer filled with distilled water-Pycnometer mass
[tex]M_w=36.773 -27.056\\\\M_w=9.084g[/tex]
Hence
[tex]V=\frac{9.084g}{0.99704 }[/tex]
[tex]V=9.111mL[/tex]
in conclusion
The volume of the Pycnometer in mL is
[tex]V=9.111mL[/tex]
For more information on this visit
https://brainly.com/question/13249201
Why are intensive properties useful for identifying a substance?
A.They do not depend on the amount of substance you have.
B.They are chemical properties.
C.They are physical properties.
D.They describe the amount of substance you have.
The intensive properties are useful for identifying a substance because it does not depend upon the amount of substance present in the sample.
The points regarding properties are the following:
The intensive properties are defined as the properties which do not depend on the amount of the substance present in the matter but depend only on the type of the matter.The colour, solubility, texture, etc. are the intensive properties. •The properties which depend upon the amount of the substance present in the sample is called the extensive properties.The mass, density etc. are the extensive properties.Therefore, the correct answer is the A. They do not depend on the amount of substance you have.
Learn more about intensive properties:
https://brainly.com/question/17651922
A galvanic cell is constructed of one half cell in which a silver wire is placed into a 1.00 Maqueous solution of silver nitrate and the other half cell is made of a zinc wire in a 1.00 M aqueous solution of zinc nitrate. calculate gibbs free energy
Answer:
https://www.plps-k12.org/site/handlers/filedownload.ashx?moduleinstanceid=2482&dataid=3257&FileName=Ch%2017%20Electrochemistry%20Practice%20Problems%20I%20-%20key.pdf
Explanation: This is all the answers just go to this link to help is a bunch of pages to help and with answers on them too! Can I get brianliest plz
write the symptoms of Tuberculosis
Answer:
Hi, There! Your Answer is Below!
Coughing for three or more weeks.
Coughing up blood or mucus.
Chest pain, or pain with breathing or coughing.
Explanation:
Tuberculosis (TB) is a disease caused by germs that are spread from person to person through the air. TB usually affects the lungs, but it can also affect other parts of the body, such as the brain, the kidneys, or the spine. A person with TB can die if they do not get treatment.
? Is a scientist who is studying cancer with the
goal of finding an effective treatment doing
pure research or applied research?
A scientist who is studying cancer with the goal of finding an effective treatment is doing applied research.
Applied research refers to scientific investigations that are conducted with the specific purpose of solving practical problems or improving existing technologies. In the case of cancer research, the scientist is aiming to find a treatment that can be directly applied to patients in order to combat the disease.
In contrast, pure research, also known as basic or fundamental research, is conducted to gain a deeper understanding of a particular phenomenon without any immediate practical application in mind. Pure research aims to expand scientific knowledge and explore new theories or concepts. While pure research may indirectly contribute to the development of applied research, its primary goal is to advance our understanding of the natural world.
In summary, a scientist studying cancer with the goal of finding an effective treatment is engaged in applied research, as they are conducting research with the intention of solving a specific problem and developing practical solutions for the benefit of cancer patients.
Learn more about applied research,here:
https://brainly.com/question/11041802
#SPJ3
Mrs. Marlow's class is conducting an investigation of a mixture of sand, iron filings, and salt. They were told that they must separate the mixture into pure sand, pure iron filings, and pure salt using only the physical properties of each component using the following supplies:
bar magnet
filter paper
plastic funnel
water
What is the BEST procedure for the students to follow in order to separate the mixture?
A mixture can be separated by looking at the physical properties of the components of the mixture.
Since salt is soluble in water, water can be added to the mixture to dissolve the salt.
The bar magnet is now introduced in order to remove the iron filings since they are attracted by a magnet.
The solution is filtered to separate the sand from the salt solution.
Lastly, the salt solution is heated to dryness to drive away the water and obtain the solid salt.
Hence the mixture has been separated into its components using their individual physical properties. Option A is the correct answer.
Learn more: https://brainly.com/question/12160179
Answer:
is it a b c or d
Explanation:
How many grams of tin would occupy 5.5 cm^3, if it had a density of 7.265 g/cm^3
Answer:
Density=Mass/Volume
7.265=M/5.5
Mass=7.265×5.5g
=39.9575g
1-How does the Law of Conservation of Energy explain why ice cubes melt in water?
2-What are the two differences between mass and weight?
3-Why does an object’s weight change on the moon but its mass stays the same?
4-Explain how two objects that have the same mass can have different densities.
5-How can you tell if a mixture is homogeneous (solution) or heterogeneous (not a solution)?
6-Identify each of the following examples below as either a homogeneous mixture (solution) or a heterogeneous mixture.
7-What are 3 methods you can use to separate a mixture? Give an example of each.
8-What is the difference between an atom and a molecule?
9-Is a compound a mixture or a pure substance?
10-How are elements arranged on the Periodic Table? by increasing
atomic number.
Answer: 1.The water molecules in the liquid phase have more energy than the molecules in the solid phase. The reason that the ice melts is that some of the energy in the water is transferred to the ice – this provides the heat necessary for the transition from the solid to liquid phase
List the steps of the scientific method
Easy points, just don't be annoying.
Answer:
•1. Make an Observation
•2. Ask a question about ____
•3. Make a hypothesis (educated guess)
•4. Make a hypothesis-based prediction
•5. Test your hypothesis
•6. Graph the results and Iterate.
Answer:
The steps of the scientific method are:-
●Report the Results.
●Ask a Question.
●Test the prediction.
●Make an observation.
●Form a hypothesis, or testable explanation.
●Make a prediction based on the hypothesis.
(giving brainlist! What should a simplified model of a large molecule like glucose show?
Glucose is a carbohydrate and monosaccharide sugar molecule that is the energy source for organisms. The simplified model of a glucose molecule will show six carbon atoms, six oxygen atoms, and twelve hydrogen atoms.
What is glucose?Glucose is one of the monosaccharide sugar that is the most abundant energy source with a molecular formula of C₆H₁₂O₆. It consists of carbon, hydrogen, and oxygen atoms with a molecular mass of 180.156 g/mol.
It is a sugar-containing aldehydic group with a six-carbon making it aldohexoses. It is found in honey and fruits that are the source of the energy and regulates metabolic and cellular reactions.
Therefore, the molecular structure of glucose contains six carbon, twelve hydrogens, and six oxygen atoms.
Learn more about glucose here:
https://brainly.com/question/2396657
#SPJ2