Look at the equation.
C₂H4 +302 2CO₂ + 2H₂O
If the reaction shown has 55.0 grams of ethylene (C₂H4) and excess oxygen (30₂), how many moles of carbon dioxide will be
produced?

Air pressure is D.low at the top hight at the bottom.

Pressure is the force that the air applies to the ground when gravity acts on it. At sea level, there is typically a pressure of 1013.25 millibars, or 14.7 pounds per square inch.

High pressure frequently heralds sunny, dry weather. Clouds and precipitation are frequently indicative of low pressure. Air that is sinking is related with high pressure. Because it is pushing DOWN on the ground, air pressure is higher.

High barometric pressure exerts additional pressure against our bodies, which restricts how much tissue can expand. On the other hand, when air pressure is low, our body's tissues can expand more, which results in more pressure.

Learn more about air pressure here:

brainly.com/question/7381033

#SPJ1

The experimental set up in B is to observe the growth the green beans without the addition of fertilizer. Thus, we can compare the growth of the plant with and without fertilizer and thereby we can understand the effect the fertilizer on the plant growth.

Fertilizers are chemical substances used to nourish the plants by making the soil rich in nutrients and minerals. Plants needs minerals along with water such as potassium, calcium, phosphorous, nitrogen etc.

Sometimes the soil comes deficient of these minerals and we have to fertilize the soli by the addition of the chemicals containing these minerals. Hence, fertilizers provide a nutrient rich soil for plant growth.

The experimental set up with fertilizer added plant and the second one (B) without fertilizer helps to compare the growth in both conditions and we can clearly understand how fertilizers effect the growth of plants by comparing the plant growth in A and B.

To find more on fertilizers, refer here:

https://brainly.com/question/24196345

#SPJ1

Neil Bohr used the fluorescent screen and an alpha particle detector to study the structure of an atom.

An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.

Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.

The atom as a whole is neutral and stable due to presence of oppositely charged particles.

Learn more about atom,here:

https://brainly.com/question/13654549

#SPJ1

Answer: I believe the answer is B

Answer:

More mass means more force is needed to achieve the same change in speed in the same amount of time. That force is transmitted from the road, to the tires, to the wheels, through the brakes, to the frame and rider.

The weight on a bicycle affects the force required to accelerate it as it increases inertia it will slow down its rate of acceleration.

Acceleration is defined as the rate of change of velocity of an object with respect to time. These are vector quantities which have magnitude as well as direction.

The orientation of the acceleration of an object as given by the orientation of the net force acting on that object. It is expressed as:

[tex]\overline{a} = \frac{v - v_0}{t} = \frac{\Delta v}{\Delta t}\overline{a} = average acceleration\\v = final velocity\\v_0 = starting velocity\\t = elapsed time[/tex]

Acceleration is proportional to the force applied, so the greater the force, the greater the speed of the object in the direction of the force. Mass is inertia, which is the reluctance to accelerate, so for the same force, more massive objects experience smaller acceleration than less massive objects.

Thus, the weight on a bicycle affects the force required to accelerate it as it increases inertia it will slow down its rate of acceleration.

Learn more about Acceleration, here:

https://brainly.com/question/2303856

#SPJ2

The amount, in moles, of chlorine that would be present in 3 moles of [tex]MgCl_2[/tex] would be 6 moles.

[tex]MgCl_2[/tex] is made from magnesium and chlorine molecules according to the following equation:

[tex]MgCl_2 --- > Mg^{2+} + 2Cl^-[/tex]

From the above equation, 1 mole of [tex]MgCl_2[/tex] is made up of 1 mole of Mg and 2 moles of Cl.

Following this established ratio, the amount of chlorine that would be present in 3 moles of  [tex]MgCl_2[/tex] can be calculated as follows:

1 mole [tex]MgCl_2[/tex] = 2 moles of Cl

3 moles  [tex]MgCl_2[/tex] = 2 x 3/1

                           = 6 moles of Cl

In other words, 6 moles of Cl would be present in 3 moles of [tex]MgCl_2[/tex].

More on stoichiometric calculations can be found here: https://brainly.com/question/27287858

#SPJ1

The stratosphere, which can be found above the troposphere and below the mesosphere, is the second layer of the Earth's atmosphere (/straetsfr, -to-).

To Learn more About stratosphere, refer To:

https://brainly.com/question/211843

#SPJ4

Magnesium and calcium are 2nd group elements with 2 valence electrons. They are metals in room temperature and easily lose these electrons to nonmetals such as oxygen.

Magnesium is 12th element in periodic table. It is 2nd group element and is a called alkaline earth metals. Its group members are calcium, strontium, and barium.

They contains 2 valence electrons which can be easily lost to a non-metal. Oxygen is highly electronegative element and it contains 6 valence electrons and need two more electrons to achieve octet.

Al is 13th group element it is not as much electropositive as alkaline earth metals. It contains 3 valence electrons and thus it need to lose all these 3 electrons to achieve octet. Hence, Al is less reactive towards O2 in comparison with Mg and Ca.

To find more on metal oxides, refer here:

https://brainly.com/question/22966565

#SPJ1

a 150- mgmg sample of technetium-99 mm is used for a diagnostic test. if technetium-99 mm has a half-life of 6.0 hh , 19 milligrams of the technetium-99 mm sample remains active 18 hh after the test.

Decay of radioactive substances follows first-order kinetics. First order rate equation is A = Ao e-kt.  Ao = Intial active amount of substances .

A = Active amount of substance after certain time (t), K = Decay constant. k = ln2 / t½, k = 0.693 / 6.0 hr, k = 0.1155 / hr. A = Ao e-kt A = 150 mg x e-0.1155 hr?¹ x 18.0 hr. A = 18.758 mg.So Answer = 19 g of  remains active 18 h after the test.The half-life of a quantity is the time it requires to decrease to half of its original value. In nuclear physics, the term is usually used to describe how rapidly atoms undergo radioactivity or how long stable atoms live. The term is also used to describe any kind of exponentially decaying in general.

Learn more about half-life here:

https://brainly.com/question/24710827

#SPJ4

16 is the mass of this atom.

The Oxygen (O) has an atomic number of 8 and has a mass number of 16. Upon accepting 2 electrons it becomes O2-. The mass number is defined as the sum of the number of protons and neutrons present in the molecule. So here for O2- it contains 8 protons,8 neutrons and 10 electrons.

To know more about atom

https://brainly.com/question/1566330

The final temperature of the oven after being preheated, y is 98 degrees Fahrenheit.

The relationship between the final temperature, y, and the time taken to preheat the oven, x is given by the equation below:

y = 20x + 78

where;

the final temperature is  y,

and the time taken to preheat the oven is  x

When x is equal to 1, the value of y can be determined as follows:

y = 20 (1) + 78

y = 98 degrees Fahrenheit.

Learn more about the temperature in degrees Fahrenheit at: https://brainly.com/question/27747237

#SPJ1

the empirical composition of this substance Its molecular weight has also been calculated to be around 156.

the molecular equation Response: CGHG.

Calculate the grams of carbon and hydrogen in 4.40 g of CO2 and 2.70 g of H2O, respectively.

4.40 g x (12.011 g/44.0098 g) = 1.20083 g of carbon

2.70 g times (2.0158 g / 18.0152 g) Equals 0.3021482 g of hydrogen

2) Calculate the corresponding number of moles from the grams of C and H molecular weight..

20083 g / 12.011 g/mol = 0.09998 mol of carbon

In terms of hydrogen, 0.3021482 g / 1.0079 g/mol equals 0.2998 mol

3) To break up the molar amounts listed above into smaller, more manageable amounts, divide each one by its lowest value.

numbers.

0.09998 mol/0.09998 mol = 1 for carbon.

hydrogen: 0.298 mol/0.0998 mol = 2.9986 mol = 3

We have now discovered the solution: the substance's empirical formula is CGHG

Learn more about molecular weight here:

https://brainly.com/question/27988184

#SPJ4

Answer:One BTU is defined as the amount of energy required to raise the temperature of  1 lb of water through 1 degree Fahrenheit

Explanation:

The molar mass of the substance is needed to convert between the moles of a given sample of a substance and its mass in grams.

A compound's molar mass, which is measured in grams per mole, specifies how much of a given material weighs in one mole. In other terms, the molar mass is the sum of the masses of all the atoms that make up a mole of a certain molecule, expressed in grams. As a result, the molar mass is measured in grams/mole.

The compound's molar mass is expressed in grams per mole, or g/mol. The mass of 1 mol, expressed in the SI as g/mol, is the definition of the molar mass. Example: Water has a molar mass of 18.016 g/mol.

Thus, The molar mass of the substance is needed to convert between the moles of a given sample of a substance and its mass in grams.

To know more about molar mass refer to:

https://brainly.com/question/837939

#SPJ1

The complete question is as follows:

What quantity is needed to convert between the moles of a given sample of a substance and its mass in grams?

a the molar mass of the substance

b the density of the substance

с the physical state of the substance

d all of the above

The mole fraction of sulfur hexafluoride gas X(SF₆) = 0.361 and the mole fraction of dinitrogen difluoride gas X(N₂O) = 0.639

moles of each gas

n = m / M

where,

n: moles and m: mass, M: molar mass

SF₆: 16.7 g / 146.06 g/mol = 0.114 mol

N₂O: 8.88 g / 44.01 g/mol = 0.202 mol

The total number of moles is 0.114 mol + 0.202 mol = 0.316 mol

To calculate the mole fraction of each gas

X = moles of gas / total number of moles

X(SF₆) = 0.114 mol / 0.316 mol = 0.361

X(N₂O) = 0.202 mol / 0.316 mol = 0.639

To learn more about the mole fraction:

https://brainly.com/question/16253885

#SPJ4

Answer:

salad

Explanation:

Colligative qualities include boiling point elevation, freezing point depression, and vapor pressure reduction. Color and density are non-colligative qualities.

Colligative qualities are those that rely on the number of particles of solute rather than the composition of the solute.

An example of a colligative property:

Reduced vapor pressure

Boiling point at an elevation

a drop in the freezing point

The osmotic pressure

Non-colligative qualities are those that are determined by the nature of the solute and solvent.

Non-colligative qualities include:

Viscosity

The surface tension

Density

Solubility

As a result, we may deduce that boiling point elevation, freezing point depression, and vapor pressure reduction are all colligative qualities. Color and density are also non-colligative qualities.

To know more about density click on the link below:

https://brainly.com/question/1354972

#SPJ4

Answer:

solubility

Explanation:

the solid substances will be added to water to see which one is soluble

The rate of effusion of substance A is 3 times the rate of effusion of substance B, and molar mass of A is 4g/mol, then molar mass of B is 36g/mol.

Graham Law:

The rate of effusion of a gaseous substance is inversely proportional to the square root of its molar mass. This is called Graham's Law

R = k/√M

where k is constant and m is molar mass of the substance.

rate of effusion of substance A is 3 times the rate of effusion of substance B.

molar mass of substance A is 4.00g/mol

Ra = 3Rb

Ra/Rb = √Mb/√Ma

3Rb/Rb = √Mb/√4

3 = √Mb/2

√Mb = 6

Mb = 36

so, molar mass of substance B is 36g/mol.

learn more about rate of effusion:

https://brainly.com/question/8804761

#SPJ4

It is false that a helium atom fusing with a hydrogen atom is the initial stage in the hydrogen-burning process.

Four hydrogen protons and two electrons are used in the basic hydrogen fusion cycle, which results in the creation of a helium nucleus, two neutrinos, and six photons. The first stage in this three-phase process is the fusion of hydrogen into deuterium. In this collision of two protons, one proton decays into a neutron, which releases an antielectron and a neutrino.

The last proton joins the neutron to form a heavy hydrogen (deuterium) nucleus, and the newly created antielectron will annihilate with an electron to generate two very high-energy photons.

A proton is grabbed by a deuterium nucleus, which subsequently emits a photon and forms a 3He nucleus, in the second phase of the synthesis of helium-3.

The third phase involves recombining two helium-3 atoms into a single helium nucleus while emitting two protons.

Take note that for every time step 3 happens, steps 1 and 2 each occur twice. The total net energy released during this process is 26 MeV.

To know more about protons click on the link below:

https://brainly.com/question/14790671

#SPJ4

Sedimentary rock layers are referred to as rock strata.

A rock is a dense mass of mineral grains that have grown or been cemented together over time. There are big rocks and little rocks. Pebbles are little rocks.

The sediment grains that are deposited by water, wind, or ice become sedimentary rocks. They are always formed in layers and are referred to as "beds" or "strata," and frequently include fossils.

Weathering, erosion, deposition, compaction, and cementation are the processes that result in the formation of these horizontal layers. Newer layers are deposited and created during this process on top of older layers, allowing for the relative dating of each layer.

Learn more about rocks on:

https://brainly.com/question/25846908

#SPJ1

The number of moles of hydrogen atom in 6.4g of methane CH4 is 0.4 moles.

To find the number of moles of hydrogen atoms in 6.4 g of methane (CH4), we need to know the molar mass of methane and use the formula for converting mass to moles:

moles = mass / molar mass

The molar mass of methane is 16.04 g/mol, so we can plug in the values and solve:

moles = (6.4 g) / (16.04 g/mol)

moles = 0.4 moles

There are 0.4 moles of hydrogen atoms in 6.4 g of methane. This is because methane is a compound made up of one carbon atom and four hydrogen atoms, and the number of moles of a compound is equal to the total number of moles of all the atoms in the compound.

Since there are four hydrogen atoms in each mole of methane, there are also 0.4 moles of hydrogen atoms in 0.4 moles of methane.

The material with the lower boiling point vaporizes first when heated, then condenses and collects.

The heat that is generated during the condensation process of higher boiling vapor is what leads to the process of vaporization. Because it has such a huge surface area, the packing enables vapors to move freely between the ascending and descending directions. In the process of evaporation, the vaporization happens at a temperature lower than the boiling point, whereas in the distillation process, the vaporization happens at the boiling point.

To know more about boiling point click on the link below:

https://brainly.com/question/40140

#SPJ4

The aluminum metal reacts with chlorine gas to form aluminum chloride the reaction starts with 3 g of chlorine gas , grams of aluminum chloride formed is 3.73.

The balanced reaction is given as :

2Al +  3Cl₂   ---->   2AlCl₃

mass of Cl = 3 g

molar mass of Cl₂  = 71 g/mol

moles of Cl₂  = mass / molar mass

                      = 3 / 71

                      = 0.0422 mol

3 mole of Cl₂  produces 2 moles of AlCl₃

0.0422 mol of  Cl₂   = (2/3) 0.0422

                                  = 0.028 mol of AlCl₃

mass of AlCl₃ = molar mass × moles

                      = 133.34 × 0.028

                      = 3.73 g

To learn more about moles here

https://brainly.com/question/20486415

#SPJ4

Answer:

Explanation:She was wrong

Answer:

Mg+HCl = MgCl+H2

Explanation:

you just have to write the correct formula of these elemernt

The connections to the different amino acids in a protein are through peptide bonds.

Amino acids are the basic monomer units that proteins are composed of.

Hence, proteins are polymers of monomeric units called amino acids.

Amino acids have a basic structure where a chiral carbon atom is bonded to four different groups.

The four groups present in amino acids are:

Amino acids in proteins are linked to each other by means of peptide bonds. The peptide bond is formed from an amino group and a carboxyl group with the removal of a water molecule.

Learn more about amino acids at: https://brainly.com/question/3535479
#SPJ1

If 22 g acetaminophen (151.163 g/mol) was generated. The percent yield of the reaction is 72.78 %.

Calculation :

C₆H₇NO  +  C₄H₆O₃  --> C₃H₉NO₂ + C₂H₄O₂

0.20 moles   0.25 moles    22g

limiting reagrnt  --> C₆H₇NO

from reaction equation

.20 mol of acetaminophen = .20*151.163 = 30.23 g

% yield = (practical/ theoritical)yield* 100 = 72.78 %

reaction yield. The reaction yield (absolute yield) of a chemical reaction is the amount of pure, dry product recovered from the reaction. Relative yield or percent yield (%) is commonly calculated to measure the efficiency of chemical reactions in organic synthesis.

Yield, also called reaction yield, is a measure of the molar amount of product to reactant consumed in a chemical reaction, usually expressed as a percentage.  Yield is one of the main factors that scientists must consider in organic and inorganic chemical synthesis processes. [2] In chemical reaction engineering, “yield,” “conversion,” and “selectivity” relate to unwanted products, how much of the starting material is consumed (conversion), how much of the desired production A term used to describe the rate at which something is formed (yield). (selectivity) represented as X, Y, and S

Learn more about yield here : https://brainly.com/question/25996347

#SPJ4

Answer:due to unequal heating

Explanation:

Democritus said matter can not be divided indefinitely, Aristotle said that matter was made of four elements while John Dalton proposed a modern atomic model based on experimentation. Rutherford said atoms are mostly empty space, Thompson brought about negative electrons in a positive framework.  Bohr said that electrons orbit the nucleus in “shells.

There are many atomic models that was proposed which includes:

Rutherford in his experiment shot alpha (α) particles at gold foil whereby most particles passed through.

Hence he concluded the following:

Some positive α-particles deflected or bounced back.

Learn more about atomic models at: https://brainly.com/question/28825274

#SPJ1