Look at the picture below. If the total mass of the reactants is 74, what will the total mass of the products be?

Answer:

Answer:

The correct answer would be - D. What causes cancer cells to grow uncontrollably?

Explanation:

A Biologist is a person that studies living organisms and the study of living organisms and their process called biology. Biology is a very vast field that involves many branches such as zoology, botany, biochemistry, immunology, biophysics, anatomy, ecology and many more.

So, given all are can be an example of the study biology wanted to do, however, the question most likely studied by a biologist would be What causes cancer cells to grow uncontrollably as it deals with an organism and their biological process.

Answer:

h = height

s = slant height

a = side length

P = perimeter of base

e = lateral edge length

r = a/2

V = volume

L = lateral surface area

B = base surface area

A = total surface area

Explanation:

Volume of a square pyramid:

V = (1/3)a2h

Slant Height of a square pyramid:

By the pythagorean theorem we know that

s2 = r2 + h2

since r = a/2

s2 = (1/4)a2 + h2, and

s = √(h2 + (1/4)a2)

This is also the height of a triangle side

Lateral Surface Area of a square pyramid (4 isosceles triangles):

For the isosceles triangle Area = (1/2)Base x Height. Our base is side length a and for this calculation our height for the triangle is slant height s. With 4 sides we need to multiply by 4.

L = 4 x (1/2)as = 2as = 2a√(h2 + (1/4)a2)

Squaring the 2 to get it back inside the radical,

L = a√(a2 + 4h2)

Base Surface Area of a square pyramid (square):

B = a2

Total Surface Area of a square pyramid:

A = L + B = a2 + a√(a2 + 4h2))

A = a(a + √(a2 + 4h2))

Answer: The value of [tex]\Delta H[/tex] is -163 kJZ

Explanation:

The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)

We are given:

Given mass of water = 72.0 g

Molar mass of water = 18 g/mol

Putting values in equation 1, we get:

[tex]\text{Moles of water}=\frac{72.0g}{18g/mol}\\\\\text{Moles of water}=4mol[/tex]

Calculating the heat released for the condensation process:

[tex]\Delta H=n\times \Delta H_{(vap)}[/tex] ......(2)

where,

[tex]\Delta H[/tex] = amount of heat released

n = number of moles of water = 4 moles

[tex]\Delta H_{(vap)}[/tex] = specific heat of vaporization = -40.7 kJ/mol

Negative sign represents the amount of heat released.

Putting values in equation 2:

[tex]\Delta H=4mol\times (-40.7kJ/mol)=-163kJ[/tex]

Hence, the value of [tex]\Delta H[/tex] is -163 kJ

Answer:

1.20 grams

Explanation:

Correct on edmentum/plato

Answer: 1.20 grams

Explanation:

Answer:

Renewable resources include biomass energy (such as ethanol), hydropower, geothermal power, wind energy, and solar energy. Biomass refers to organic material from plants or animals. This includes wood, sewage, and ethanol (which comes from corn or other plants).

five examples of renewable resources

Solar energy.

Wind energy.

Geothermal energy.

Hydropower.

Bioenergy.

I hope it help you

Answer:

The most popular renewable energy sources

currently are

Solar energy

Wind energy

Hydro energy

Tidal energy

Geothermal energy

Biomass energy

Answer:

When an electric current is passed through acidified water, it decomposes to give hydrogen and oxygen gas. The hydrogen gas is obtained at the cathode and the oxygen gas is obtained at the anode

Answer:

the answer is C in my opinion.. hope this might be helpful

Answer:

A) This is an example of Green Design

Explanation:

Answer: In liquid water, water molecules are moving faster. They are still close together, but they are no longer stuck in a rigid pattern as they are in ice. Water molecules in liquid water are constantly sliding past and bumping into each other; they keep moving from one place to another.

Answer:

they are different forms

Explanation:

ice is solid

and water is liquid

they also have different densities

Explanation:

[tex]element \: with \: 2 \: atomic \: number \\ \\ is \: stable \: because \: it \: has \: already \: \\ \\ completed \: its \: orbit \: \\ \\ but \: atomic \: number \: with \: 3 \: and \: 9 \\ \\ will \: have \: to \: become \: stable \: \\ \\ after \: giving \: one \: electron \\ \\ so \: \: element \: with \: 3 \: and \: 9 \: atomic \: number \\ \\ is \: most \: reactive[/tex]

Answer:

c. Hfus is always negative.

Explanation:

Because energy is released when fusing solids

Answer:

A. An electron gains or loses energy and moves between continuous

energy levels.

Answer:

I think it's D cause one of the requirements for a planet is that it has to revolve around a star

Answer:

a

Explanation:

A molecular ingredient that could be used in a wall-filling material is C₂₇H₃₆N₂O₁₀, is not a good thermal insulator, hence option A is correct.

The big molecule C₂₇H₃₆N₂O₁₀ is a poor thermal insulator. Since NeNa is a relatively reactive chemical, it would probably dissolve in water far too quickly. The acidic molecule HCl would dissolve far too quickly in water.

Not a good thermal insulator is C₂₇H₃₆N₂O₁₀. It is a big molecule composed of a lot of hydrogen atoms. Since hydrogen atoms are excellent heat conductors, they would be ineffective in stopping heat from passing through a material used to fill a wall.

Thus, the option (A) C₂₇H₃₆N₂O₁₀ is correct.

Learn more about thermal insulator, here:

https://brainly.com/question/23134662

#SPJ6

Answer:

Insulation reduces the exchange of heat through a surface such as a wall, attic, duct or roof. In a well-insulated home, less warm air escapes from the house during the winter, and less cool air escapes during the summer, reducing the amount of energy needed for heating and cooling

Answer:

4.47 × 10⁻³ M⁻² s⁻¹

Explanation:

Let's consider the following generic equation.

A + 2 B + 4 C → products

This reaction is known to be second order in A, first order in B and independent of the concentration of C (zero order in C). The rate law is:

rate = k × [A]² × [B] × [C]⁰

rate = k × [A]² × [B]

where k is the rate constant

When the rate is 0.783 M/s, [A] = 5.00 M, [B] = 7.00 M, and [C] = 3.00 M, the rate constant is:

k = rate / [A]² × [B]

k = 0.783 M/s / (5.00)² × (7.00) = 4.47 × 10⁻³ M⁻² s⁻¹

Answer:

dftdffdgxrdfdrdxxxxdddddddddddddeeertdffddy

Answer: The enthalpy of the overall chemical equation is -205.7 kJ

Explanation:

Hess's law is defined as the law which states that the total amount of heat absorbed or released for a given chemical reaction will remain the same whether the process occurs in one step or several steps.

In this law, a chemical equation is treated as an ordinary algebraic expression that can be added or subtracted to yield the required overall equation.  

The enthalpy change or heat of the overall reaction is the summation of the enthalpies or heats of the intermediate reactions involved in the process.

The given overall chemical equation follows:

[tex]CH_4(g)+4Cl_2(g)\rightarrow CCl_4(g)+4HCl(g);\Delta H^o_{rxn}[/tex]

The intermediate equations for the above reaction are:

(1)  [tex]CH_4(g)\rightarrow C(s)+2H_2(g);\Delta H_1=74.6 kJ[/tex]

(2)  [tex]CCl_4(g)\rightarrow C(s)+2Cl_2(g);\Delta H_2=95.7kJ[/tex]

(3)  [tex]H_2(g)+Cl_2(g)\rightarrow 2HCl(g);\Delta H_3=-92.3kJ[/tex]

According to Hess law, the enthalpy of the reaction becomes:

[tex]\Delta H^o_{rxn}=[1\times (\Delta H_1)] + [1\times (-\Delta H_2)] + [2\times (\Delta H_3)][/tex]

Putting values in above expression, we get:

[tex]\Delta H^o_{rxn}=[1\times (74.6)] + [1\times (-95.7)] + [2\times (-92.3)]\\\\\Delta H^o_{rxn}=-205.7kJ[/tex]

Hence, the enthalpy of the overall chemical equation is -205.7 kJ

Answer:

a space or vesicle within the cytoplasm of a cell, enclosed by a membrane and typically containing fluid.

or

a small cavity or space in tissue, especially in nervous tissue as the result of disease.

Answer:

Because they take up a certain amount of volume because there is no space in-between the particles, a gases can be compressed because there is alot of space in-between each particle

Explanation:

Answer:

The actual sequence of steps which describe the life cycle of a lake is given below:

C. Runoff fills a depression - sediments build up

- water rises continuously

Explanation:

This is because, the water which builds up as a result of the runoff water accumulating on the depression helps towards building up. When it must have accumulated greatly, it ends up forming a lake.

Answer:

A.) aldehyde is the answer

From the given structural formula, the compound is ethanamide and thus, belongs to the group of amides. Thus, the correct option is B.

Amide is a functional group of organic compounds having an acyl group (R-C=O) linked to amine group (-NR¹R² where R¹ and R² are hydrogen atoms or alkyl groups). The amide functional group is given as -CON= (not double bond with N, but two distinct single bonds).

Amides can be classified into the following types depending on the moiety attached to nitrogen other than the carbonyl carbon:

1. Primary amides - amide in which the nitrogen atoms is attached to two hydrogen atoms

2. Secondary amides - in which the nitrogen atom is attached to one hydrogen and one alkyl group.

3. Tertiary amides - in which the nitrogen atom is attached to two alkyl groups.

Learn more about amides in:

https://brainly.com/question/29595493

#SPJ2

Answer:

D. A measure of the acidity of the solution

Explanation:

pH is a measure of how acidic or basic a solution is, and is measured on a scale from 0-14, where 7 is neutral, anything less than 7 is acidic, and anything more than 7 is basic.

Answer:

Please find the answer to the question below

Explanation:

In chemistry, the following mathematical formula is used to calculate the number of moles contained by a substance:

mole = mass of substance (g)/molar mass of substance (g/mol)

Molar mass of salicylic acid (C7H6O3) = 12(7) + 1(6) + 16(3)

= 84 + 6 + 48

= 138g/mol

Mass = 5.50grams

mole = 5.5/138

mole = 0.039

Approximately, the number of moles of 5.5grams of salicylic acid is 0.04moles. This is in accordance with the mole value (0.04) given in this question.

Answer:

(1.0, 1.4)

Explanation:

Graph the two equations [tex]\log_3 5x[/tex] and [tex]\log_5 (2x+8)[/tex]. The point of intersection is the solution to the system of equations.

Graph on Desmos:

[tex]\log_3 5x\implies \text{Red},\\\log_5 (2x+8)\implies \text{Blue}[/tex]

Which is the best reason to carry out scientific research on climate change?

A. To help people prepare for the future

C. To elect better-informed politicians

D. To win political debates

Answer:

to create jobs for scientists

Hi there! A simple answer and explanation is below :)

Answer:

A) PET plastic water bottle

Explanation:

Plastic goes through a manufacturing process before being used to make bottles for liquids like milk, soda, motor oil, and shampoo, as well as dry items like pharmaceuticals and nutritional supplements. Plastic is made up of a variety of organic polymers, including polyethylene and ethylene, in its unprocessed condition. In a soft state, plastic can be molded into the desired shape and then cast into a solid stat

Answer:

the heat from the universe during the big bang

a.k.a.

ITS A

Explanation:

the universe is still expanding, so what is gonna be used to create that new matter that's expanding the universe? energy and heat from the beginning of the universe! the universe started off as this point that was probably smaller than a quantum foam and infinite heat and started expanding from there