Malar is playing with a toy car and track set. She has made a hill to let the car roll down, followed by a series of small hills and then a short flat section on the floor. The car starts at the top of the hill which is 137 cm above the short flat section. How much energy was lost due to friction (between the car and the sides of the track, and the car’s axels) during the entire trip? You don’t have any details about the time while the car is going down the hill or through the loop, so you don’t know how fast it is going at the top of the loop.
Mass is 150 g

Answer:

belpw

Explanation:

The distance prior to the sliding friction dispersing her energy would be:

- The distance will remain unaffected by the sliding friction i.e. 354m

As we know, When Sliding friction dissolves her energy, leading her Kinetic Energy to turn 0 on coming to the state of rest. So,

[tex]1/2 mv^2 - 1/2 mu^2 = -W[/tex]            (∵ Work in -ve denotes it is done opposite to friction)

Given that,

m(mass) [tex]= 50 kg[/tex]

v(velocity) [tex]= 30 km/hr[/tex] or [tex]8.33 m/s[/tex]

The coefficient of Kinetic Friction [tex]= 0.01[/tex]

g(gravitational force) [tex]= 9.8 m/s^2[/tex]

Initial Velocity(u) [tex]= 30[/tex] × [tex]1000/3600 m/s[/tex]

[tex]= 8.33 m/s[/tex]

Now by employing the provided values,

[tex]F =[/tex] μ[tex]mg[/tex]

[tex]= (0.01) (50) (9.8)[/tex]

[tex]= 4.9[/tex]

∵ [tex]F = 4.9 N[/tex]

By using the above expression, we will find the distance;

[tex]1/2 mv^2 - 1/2 mu^2 = -W[/tex]

⇒ [tex]1/2 (50) (0)^2 - 1/2 (50) (8.33)^2 = -4.9(S)[/tex]

⇒ [tex]1734.7225 = 4.9S[/tex]

⇒ [tex]S = 1734.7225/4.9[/tex]

∵ [tex]S = 354 m[/tex]

Because [tex]1/2 mv^2 - 1/2 mu^2 = -W[/tex]  [tex]= -[/tex] μmgS

⇒ [tex]S = (u^2 - v^2)[/tex]/2μ[tex]g[/tex]

Thus, the distance will remain unaffected by the sliding friction i.e. 354m

Learn more about "Friction" here:

brainly.com/question/2122951

Explanation:

The weight of an object on the surface of the earth is equal to the gravitational force exerted by the earth on the object.

[tex]W=F_G[/tex]

[tex]mg = G \dfrac{mM}{R^2}[/tex]

which gives us an expression for the acceleration due to gravity g as

[tex]g = G\dfrac{M}{R^2}[/tex]

At a height h = R, the radius of a satellite's orbit is 2R. Then the acceleration due to gravity [tex]g_h[/tex] at this height is

[tex]mg_h = G \dfrac{mM}{(2R)^2}= G \dfrac{mM}{4R^2}[/tex]

Simplifying this, we get

[tex]g_h= G \dfrac{M}{4R^2} = \dfrac{1}{4} \left(G \dfrac{M}{R^2} \right) = \dfrac{1}{4}g[/tex]

Answer: hello some data related to your question is missing attached below is the missing data and diagram related to the solution

answer:

P = 141.21 N

Explanation:

Given data:

Mass of crate = 50 kg

coefficient  of static friction ( μ ) = 0.25

Calculate minimum horizontal force ( P ) that holds the crate from sliding

∑fx = 0

     = P + Fcos θ - N*sinθ = 0

     = P + 0.25N cos 30° - Nsin30°  = 0

∴ P = 0.2835 N = 0

P - 0.2853 N = 0 ------- ( 1 )

∑fy = 0

     - 50g + Ncosθ + Fsinθ

     - 50*9.81 + Ncos30° + 0.25Nsin30°

∴ N = 494.942 N ----- ( 2 )

input 2 into 1

P - 0.2853 ( 494.942 ) = 0

P = 141.21 N

Answer:

B.

Explanation:

sana makatulong sayo

Answer:

Explanation:

i am sorry i needed points

Answer:

Distance = speed * time

55*5

275 meters.

The train would have covered a distance of 275 m

We can define distance as to how much ground an object has covered despite its starting or ending point.

Distance = speed * time

given

speed= 55 m/s

time = 5 sec

Distance = 55 * 5 = 275 m

The train would have covered a distance of 275 m

learn more about distance

https://brainly.com/question/15172156?referrer=searchResults

#SPJ2

Answer:

a. 1 Newton = 100000 Dyne

b. a represents acceleration.

Explanation:

Newton is the standard unit (S.I) of measurement of force. Converting 1 Newton to dyne we have;

1 Newton = 10⁵ Dyne

1 Newton = 100000 Dyne

Newton's Second Law of Motion states that the acceleration of a physical object is directly proportional to the net force acting on the physical object and inversely proportional to its mass.

Mathematically, it is given by the formula;

Force = mass * acceleration

[tex] F = ma[/tex]

Hence, we can deduce that a represents the acceleration of an object and it's measured in meters per seconds square.

Answer:

[tex]\mu=0.185[/tex]

Explanation:

From the question we are told that:

Mass [tex]m=17kg[/tex]

Force [tex]F=33N[/tex]

Velocity [tex]v=1.6m/s[/tex]

Distance [tex]d= 9.8m[/tex]

Generally the equation for Work done is mathematically given by

 [tex]W=\triangle K.E+\triangle P.E[/tex]

Where

 [tex]\triangle K.E=(F-F_f)*2[/tex]

 [tex]F_f=F+\frac{\triangle K.E}{d}[/tex]

 [tex]F_f=33+\frac{0.5*17*1.6^2}{9.8}[/tex]

 [tex]F_f=30.8N[/tex]

Since

 [tex]f = \mu*m*g[/tex]

 [tex]\mu= 30.8/(m*g)[/tex]

 [tex]\mu= 30.8/(17*9.81)[/tex]

 [tex]\mu=0.185[/tex]

Answer:

less than the weight of the block.

Explanation:

From the free body diagram, we get.

The normal force is N = Mg cosθ

The tension in the string is T = Mg sinθ

Wight of the block when the block is static, W = Mg

Now since the magnitude of cosθ is in the range of : 0 < cosθ < 1,

therefore, the normal force is less than the weight of the static block.

Answer:

1. Friction enables us to walk freely.

2. It helps to support ladder against wall.

3. It becomes possible to transfer one form of energy to another.

4. Objects can be piled up without slipping.

Maximum horizontal force that can be applied on the box is 300.32 N.

Mass of the heaviest box that can be pushed on the ramp at constant speed is 105.16 pound.

Kinetic friction is defined as the opposing force exerted by the surface on an object in contact with it, when there is relative motion between the two surfaces.

Here,

Mass of the box, m = 150 lb = 68.1 kg

Coefficient of kinetic friction, μ = 0.45

Maximum horizontal force that can be applied on the box is the kinetic frictional force. Frictional force,

F(k) = μmg

F(k) = 0.45 x 68.1 x 9.8

F(k) = 300.32 N

Now, the box sits on a ramp inclined at 60°

Coefficient of kinetic friction, μ = 0.45

The net force here acting on the box placed in the ramp is due to the kinetic frictional force and the weight of the box.

So,

Frictional force, F(k)' = μmgcosθ

F(k)' = 0.45 x M x 9.8 x cos 60

F(k)' = 2.2M

Weight of the box acting horizontally,

W = Mgsinθ

W = M x 9.8 x sin60

W = 8.5M

Therefore, net force,

Fn = W - F(k)'

Fn = 8.5M - 2.2M

Fn = 6.3M

The total force acting on the box is

F = F(k) - Fn

ma = 300.32 - 6.3M

Since, the box is moving with constant speed, the acceleration, a = 0

Therefore,

300.32 - 6.3M = 0

6.3M = 300.32

M = 300.32/6.3

M = 47.7 kg = 105.16 pound

Hence,

Maximum horizontal force that can be applied on the box is 300.32 N.

Mass of the heaviest box that can be pushed on the ramp at constant speed is 105.16 pound.

To learn more about kinetic friction, click:

https://brainly.com/question/29100737

#SPJ2

Answer:

Explanation:

From the given information:

the car's momentum = momentum of the truck

∴

(a) 816 kg × v = 2650 kg × 16.0 km/h

v = (2650 kg × 16.0 km/h) /  816 kg

v = 51.96 km/hr

(b) 816 kg × v = 9080 kg × 16.0 km/h

v = (9080 kg × 16.0 km/h) /  816 kg

v = 178.04 km/hr

Answer:

the correct answer is C   v = 60 cm / s

Explanation:

The speed of a wave is related to the frequency and the wavelength

         v = λ f

They indicate that the object performs 20 oscillations every second, this is the frequency

         f = 20 Hz

the wavelength is the distance until the wave repeats, the distance between two consecutive peaks corresponds to the wavelength

         λ = 3 cm = 0.03 m

let's calculate

       v = 20 0.03

       v = 0.6 m / s

       v = 60 cm / s

the correct answer is C

Two connection methods are used for brushless DC motors. One method is to connect the coils in a loop as we compared it with the rotor winding of DC motors in Fig. 2.27. This method is called a Δ (delta) connection.

CORRECT ME IF IM WRONG!!

>>> JAZMINE

Answer:

the largest distance we can measure is 10¹⁴ km

Explanation:

Given the data in the question;

Threshold hearing = 10⁻²⁰

smallest distance measured = 1 mm

Largest distance measured will be;

⇒ ( threshold hearing )⁻¹ × smallest distance

= ( 1 / 10⁻²⁰ ) × 1 mm

= 10²⁰ × 1mm

= 10²⁰ mm

we know that; 1000 mm = 10⁶ km

Largest distance = ( 10²⁰ / 10⁶ ) km

= 10¹⁴ km

Therefore, the largest distance we can measure is 10¹⁴ km

Answer:

[tex] = \frac{30 \times {10}^{ - 3} }{1} \\ = 0.03 \: km \: per \: second[/tex]

Answer:

108 km/hr or 0.03 km/s

Explanation:

conversion factor for m/s to km/hr is 5/18

conversion factor for m/s to km/s is 1/1000

Answer:

The surface tension is 190.2 N/m.

Explanation:

Initial radius, r = 4 cm

final radius, r' = 6 cm

Work doen, W = 15 J

Let the surface tension is T.

The work  done is given by

W = Surface Tension x change in surface area

[tex]15 = T \times 4\pi^2(r'^2 - r^2)\\\\15 = T \times 4 \times 3.14\times 3.14 (0.06^2- 0.04^2)\\\\15 = T\times 0.0788\\\\T = 190.2 N/m[/tex]

Answer:

Mercury - 800°F (430°C) during the day, -290°F (-180°C) at night. Venus - 880°F (471°C) Earth - 61°F (16°C) Mars - minus 20°F (-28°C)30-Jan-2018

Answer:

[tex]P=217600Pa[/tex]

Explanation:

From the question we are told that:

Density [tex]\rho=1000kg/m^3[/tex]

Depth of Water [tex]d=12.0m[/tex]

Generally the equation for Pressure is mathematically given by

 [tex]P=\rho gh[/tex]

 [tex]P=1000*9.8*12[/tex]

 [tex]P=117600N/m^2[/tex]

Therefore

Absolute Pressure=P+P'

Where

P=Pressure under water

P'=Atmospheric Pressure

Therefore

 [tex]P_A=P+P'[/tex]

 [tex]P_A=117,600+10^5[/tex]

 [tex]P=217600Pa[/tex]

Answer:

Answer:

A). The paper airplane’s motion is due to horizontal inertia and the vertical pull of gravity.

Explanation:

Edge.

Answer:

The motion of the paper airplane  is best explained by horizontal inertia and vertical pull of gravity.

Explanation:

Inertia is the property by which the body wants to remain in its position unless any external for is applied. Here horizontal inertia is inertia of motion which is acting horizontally .

While vertical pull is due to the earth .

Hence horizontal inertia and vertical pull best explain the projectile motion of paper airplane.

Also read it;

https://brainly.com/question/11049671

#SPJ2

Explanation:

time=Distance/speed

t=32/8

t=4 seconds

Answer:

1. Carpenter

2. True

Explanation:

While a mason was working concrete into the formwork, the formwork collapses. The best person to rectify this problem is CARPENTER.

This is because it is the job of the Carpenter to design and build formwork, most especially wooden formwork. Formwork is like casing built to receive concrete and reinforcement during construction. Hence, when formwork collapses either due to stress, tension, or improper construction, it is the job of Carpenter to reconstruct the formwork or rectify the problem.

It is TRUE that when a device made in a workplace had defects. To address this issue the workshop manager should communicate directly with the workshop​. However, this communication will be an instruction on what to do next, and it usually directs those responsible to take action where necessary. For example, a workshop manager communicates to a carpenter about the need to rectify a chair or table that has a defect.

Complete question is;

A projectile of mass m is fired horizontally with an initial speed of v0 from a height of h above a flat, desert surface. Neglecting air friction, at the instant before the projectile hits the ground, find the following in terms of m, v0, h and g:

(a) the work done by the force of gravity on the projectile,

(b) the change in kinetic energy of the projectile since it was fired, and

(c) the final kinetic energy of the projectile.

(d) Are any of the answers changed if the initial angle is changed?

Answer:

A) W = mgh

B) ΔKE = mgh

C) K2 = mgh + ½mv_o²

D) No they wouldn't change

Explanation:

We are expressing in terms of m, v0​, h, and g. They are;

m is mass

v0 is initial velocity

h is height of projectile fired

g is acceleration due to gravity

A) Now, the formula for workdone by force of gravity on projectile is;

W = F × h

Now, Force(F) can be expressed as mg since it is force of gravity.

Thus; W = mgh

Now, there is no mention of any angles of being fired because we are just told it was fired horizontally.

Therefore, even if the angle is changed, workdone will not change because the equation doesn't depend on the angle.

B) Change in kinetic energy is simply;

ΔKE = K2 - K1

Where K2 is final kinetic energy and K1 is initial kinetic energy.

However, from conservation of energy, we now that change in kinetic energy = change in potential energy.

Thus;

ΔKE = ΔPE

ΔPE = U2 - U1

U2 is final potential energy = mgh

U1 is initial potential energy = mg(0) = 0. 0 was used as h because at initial point no height had been covered.

Thus;

ΔKE = ΔPE = mgh

Again like a above, the change in kinetic energy will not change because the equation doesn't depend on the angle.

C) As seen in B above,

ΔKE = ΔPE

Thus;

½mv² - ½mv_o² = mgh

Where final kinetic energy, K2 = ½mv²

And initial kinetic energy = ½mv_o²

Thus;

K2 = mgh + ½mv_o²

Similar to a and B above, this will not change even if initial angle is changed

D) All of the answers wouldn't change because their equations don't depend on the angle.

Answer:

The range of the photon energies is between:

2.652 x 10⁻²⁵ J    to    4.973 x 10⁻²⁵ J

Explanation:

The energy of a photon is calculated using the following equation;

E = hf

where;

h is Planck's constant = 6.63 x 10⁻³⁴ Js

f is frequency of the photon

[tex]E = h \frac{c}{\lambda} \\\\where;\\\\\lambda \ is \ the \ wavelength\\\\c \ is \ the \ speed \ of \ light \ = 3\times 10^8 \ m/s\\\\When \ \lambda = 400 \ mm = 400 \ \times 10^{-3} \ m\\\\E = \frac{(6.63 \times 10^{-34})(3\times 10^8)}{400 \times 10^{-3}} \\\\E = 4.973 \times 10^{-25} \ J[/tex]

[tex]When \ \lambda = 750 \ mm = 750 \ \times 10^{-3} \ m\\\\E = \frac{(6.63 \times 10^{-34})(3\times 10^8)}{750 \times 10^{-3}} \\\\E = 2.652 \times 10^{-25} \ J[/tex]

The range of the photon energies is between:

2.652 x 10⁻²⁵ J    to    4.973 x 10⁻²⁵ J

Answer:

a) [tex]T=0.01s[/tex]

b) [tex]T=0.001s[/tex]

c) [tex]T=0.00001s[/tex]

Explanation:

From the question we are told that:

Given Frequencies

a. 100 Hz,

b. 1 kHz,

c. 100 kHz.

Generally the equation for Waveform Period is mathematically given by

[tex]T=\frac{1}{f}[/tex]

Therefore

a)

For

[tex]T=100 Hz[/tex]

[tex]T=\frac{1}{100}[/tex]

[tex]T=0.01s[/tex]

b)

For

[tex]F=1kHz[/tex]

[tex]T=\frac{1}{1000}[/tex]

[tex]T=0.001s[/tex]

c)

For

[tex]F=100kHz[/tex]

[tex]T=\frac{1}{100*100}[/tex]

[tex]T=0.00001s[/tex]

Complete question is;

Use a variation model to solve for the unknown value.

The stopping distance of a car is directly proportional to the square of the speed of the car.

a. If a car traveling 50 mph has a stopping distance of 170 ft, find the stopping distance of a car that is traveling 70 mph.

b. If it takes 244.8 ft for a car to stop, how fast was it traveling before the brakes were applied?

Answer:

A) d = 333.2 ft

B) 60 mph

Explanation:

Let the stopping distance be d

Let the speed of the car be v

We are told that the stopping distance is directly proportional to the square of the speed of the car. Thus;

d ∝ v²

Therefore, d = kv²

Where k is constant of variation.

A) Speed is 50 mph and stopping distance of 170 ft.

v = 50 mph

d = 170 ft = 0.032197 miles

Thus,from d = kv², we have;

0.032197 = k(50²)

0.032197 = 2500k

k = 0.032197/2500

k = 0.0000128788

If the car is now travelling at 70 mph, then;

d = 0.0000128788 × 70²

d = 0.06310612 miles

Converting to ft gives;

d = 333.2 ft

B) stopping distance is now 244.8 ft

Converting to miles = 0.046363636 miles

Thus from d = kv², we have;

0.046363636 = 0.0000128788(v²)

v² = 0.046363636/0.0000128788

v² = 3599.99658

v = √3599.99658

v ≈ 60 mph

Answer:

30

Explanation:

since  [tex]\frac{30}{5}[/tex]=6

         [tex]\frac{30}{6}[/tex]=5

then both 5 and 6 are factors of 30

Have a nice day

Answer:

The ratio of the resistances of second coil to the first coil is the ratio of square of radius of the first coil to the square of radius of  second coil.

And

The ratio of the resistances of fourth coil to the third coil is the ratio of square of radius of the third coil to the square of radius of  fourth coil.

Explanation:

The resistance of the coil is directly proportional to the length of the coil and inversely proportional to the area of coil and hence inversely proportional to the square of radius of the coil.

So, the ratio of the resistances of second coil to the first coil is the ratio of square of radius of the first coil to the square of radius of  second coil.

And

The ratio of the resistances of fourth coil to the third coil is the ratio of square of radius of the third coil to the square of radius of  fourth coil.