Many services are available via the Internet, and most are made possible by the TCP/IP suite of protocols.
Identify which protocol or Internet-based service is being used in each scenario.
VoIP Elijah uses his laptop to check his work voicemails.
IM Lise chats with her sales team about a new customer outreach initiative.
IRC Michele connects to the Internet at the airport for a few minutes to download any new email messages from work.
SMTP Rex sends an email to his boss updating her on the current status of a complaint from a customer.
POP Tim searches online for casual conversation about his new hobby flying drones.

The feature that distinguishes a LAN from a WAN is that (D) "a LAN connects computers in a single location".

A LAN (Local Area Network) is a computer network that connects devices in a small geographical area, such as a home, office, or building. In contrast, a WAN (Wide Area Network) is a network that covers a larger geographical area, such as a city, country, or even the whole world. The main difference between the two is the size of the area they cover and the number of devices they connect. LANs typically have higher bandwidth and faster data transfer rates, while WANs often have lower bandwidth and slower transfer rates due to the distance between devices. Both LANs and WANs can be used to share resources and data, but they are designed to meet different needs.

Therefore, the correct answer is (D) "A LAN connects computers in a single location."

You can learn more about LAN at

https://brainly.com/question/24260900

#SPJ11

The two security measures that would BEST secure a wireless network, according to the given scenario, are:A. Change the encryption method to WPA.D. Enable and configure MAC filtering because WEP (Wired Equivalent Privacy) is the weakest encryption method of the three (WEP, WPA, WPA2) used for securing a wireless network. So, it is best to replace it with WPA (Wi-Fi Protected Access) or WPA2.

Changing the encryption method to WPA will help to prevent unauthorized connections from accessing the wireless network. The third option, enabling SSID broadcast, will not help in securing the wireless network as it will make the network visible to all devices within the range. So, this option is incorrect.

Now coming to option B, limiting the DHCP scope to three addresses total would mean that the router will only provide three IP addresses, making it difficult to add more devices to the network. This method will only create an inconvenience and will not be useful for securing the network. Therefore, this option is also incorrect.

Now coming to option D, enabling and configuring MAC filtering will prevent unauthorized devices from accessing the network by using the device's MAC address to filter out any device that does not have an authorized MAC address. This is one of the effective security measures to secure a wireless network. So, it is one of the right answers.

Finally, option E, changing the broadcast channel to a less commonly used channel, might help reduce the interference from neighboring networks, but it will not prevent unauthorized access to the network. So, this option is also incorrect.

You can learn more about WPA at: brainly.com/question/20616422

#SPJ11

Opening NAT type for multiple PCs requires you to create a static IP address and forwarding ports on your router. This will allow the router to allocate a specific IP address to each device that will always be the same.

Opening NAT type for multiple PC's- To open NAT type for multiple PCs, follow the steps below:

Step 1: Get the MAC addresses of all PCs. Ensure that you have the MAC addresses of all the devices that you want to connect to the network. The MAC address is the unique address that identifies each device on the network. To find the MAC address on a PC, open the command prompt and type "ipconfig/all"

Step 2: Reserve an IP address for each device. Once you have the MAC addresses, you can reserve an IP address for each device. This ensures that each device will always have the same IP address. You can do this by logging into your router and creating a static IP address.

Step 3: Port forwarding. Once you have created static IP addresses, you will need to forward the ports for each device. This involves opening the required ports for each device on your router. This can be done by accessing your router settings and forwarding the required ports. To do this, you will need to know which ports to forward for each device. You can find this information online, or by contacting the manufacturer of your devices.

To learn more about "open NAT", visit:  https://brainly.com/question/31143418

#SPJ11

Bar code scanners, RFID tags, and touch screens are technologies commonly used by businesses in the data input step of the information processing cycle.

These technologies allow businesses to quickly and accurately collect data from various sources and input it into their information systems.

Bar code scanners and RFID tags are used to input data automatically from products, inventory, or assets, reducing the time and errors associated with manual data entry. Touch screens, on the other hand, are used as an interface for manual data input by allowing users to interact directly with the system through a touch-based interface.

By using these technologies in the data input step, businesses can improve the accuracy, speed, and efficiency of their information processing, leading to more informed decision-making and better overall performance.

To know more about Bar code click here:

brainly.com/question/30617824

#SPJ4

To create a data center, various hardware components are required.

The data center is the most important component of the cloud computing infrastructure.

The following are the main hardware components that are needed to set up a data center:

Server: It is a central computer that manages data storage, network traffic, and software applications. It is the most important component of a data center.

Storage device: The storage device is used to store data. It could be a hard drive, tape drive, or cloud-based storage. The data center's storage system must have redundancy to guarantee data integrity and high availability.

Routers and Switches: Routers and switches are used to connect servers to each other and to the Internet. A router is a device that directs data packets to their intended destination, while a switch is used to connect devices within the data center.

Firewall: A firewall is used to protect the data center from unauthorized access, virus, and malware attacks.

Cooling and Power Supply: Data centers require specialized power and cooling systems to ensure reliable operation. They must have backup power and cooling systems to keep the servers and equipment operational even during power outages.

Backup systems: Backups are critical for data centers because they provide a way to recover data in the event of a disaster or hardware failure. Backups should be taken frequently, and they should be stored in a secure, offsite location where they can be easily accessed in the event of a disaster or data loss.

Learn more about data center at

https://brainly.com/question/14517816

#SPj11

The RSSI (received signal strength indicator) level required for Tim to establish the connection functional as per the requirements is -70 dBm. The correct answer is Option C.

Received Signal Strength Indicator (RSSI) is an estimated measurement of the signal quality received by the wireless device antenna. A wireless device antenna with a low RSSI value might need a new or improved antenna. RSSI is measured in dBm (decibel milliwatts) and is shown as a negative number because it indicates the degree of signal loss (-50 dBm is a stronger signal than -80 dBm).

Based on the provided requirements, Tim must guarantee that the network connection is stable and can transmit time-sensitive data. Tim must determine the minimum RSSI level that is acceptable for this operation. The acceptable RSSI level is -70 dBm.

Learn more about RSSI here: https://brainly.com/question/27785313

#SPJ11

To create a trust from the eastsim.com network, you should do the following: Create the trust as an outgoing trust. Create the trust as an incoming trust. Create a forest trust between eastsim.com and westsim.com.

These three are the options that you need to choose to create a trust from the eastsim.com network. What is an incoming trust?An incoming trust is established to allow a trusted domain to utilize resources on the local domain. It allows resources in the local domain to be used by the trusted domain's users and computers.

What is an outgoing trust? An outgoing trust allows the domain to trust other domains. The local domain is trusted by domains in the trusted domain.The forest trust A forest trust can be created to facilitate resource sharing between two forests. The forest trust is established at the forest level and is bi-directional. It implies that users from one forest can access resources in the other forest and vice versa.

Learn more about  create a trust between network domain at: brainly.com/question/15129727

#SPJ11

The notation that Kevin should write to mark the relationship between an employee and payroll deductions where an employee can have no payroll deductions or he/she can have many deductions is "0..*."

A class diagram is a kind of diagram in UML that depicts the structure of a framework by indicating the classes that make up the system, their attributes, and the relationships between them. It portrays a method or an application in terms of the classes and interfaces that make it up and the collaborations between those elements that implement the behavior of the entire system. A relationship in UMLA relationship in Unified Modeling Language (UML) is a connection between two or more things.

These things can be entities, classes, components, actors, or any other model element. There are several types of relationships in UML, including inheritance, association, aggregation, and composition, among others.

Learn more about UML: https://brainly.com/question/15078406

#SPJ11

There are several strategies that Lakeisha could use to speed up her data processing, such as parallel processing, data compression, and data aggregation.

These strategies can be used to reduce the amount of data that needs to be processed, speed up the processing of each individual data point, and allow multiple data points to be processed simultaneously.

Additionally, she could use a more powerful computer or use cloud-based computing to speed up her program.Lakeisha is developing a program to process data from smart sensors installed in factories.

The thousands of sensors produce millions of data points each day. When she ran her program on her computer, it took 10 hours to complete.

Learn more about data processing at

https://brainly.com/question/30094947

#SPJ11

Your organization plans to adopt the hybrid cloud deployment model.

Azure Stack is a hybrid cloud platform that allows businesses to offer Azure services from their data centers. It allows companies to take advantage of the power of Azure's hyper-scale cloud infrastructure while also meeting regulatory and compliance requirements. Azure Stack provides consistent Azure services, which include infrastructure-as-a-service (IaaS) and platform-as-a-service (PaaS) services, as well as DevOps tools, that can be delivered on-premises or in the cloud.

Azure Stack deployment modelsAzure Stack deployment can be in three different models: Integrated systems, Azure Stack Hub, and Azure Stack HCI. The difference between these models is their use cases. Organizations can deploy Azure Stack in the following cloud deployment models: Private cloud public cloud hybrid cloud your organization is based in the United States and must follow strict data sovereignty requirements.

Your organization plans to use Azure Stack internally while also consuming public cloud services using Azure cloud. The hybrid cloud deployment model, in this case, is the best option. It enables companies to combine public cloud offerings with on-premises solutions. The hybrid cloud approach also allows organizations to address data security concerns while also allowing for cloud scaling and agility. It can be more cost-effective than a private cloud deployment model while also delivering more security than public cloud deployment models.

To know more about the cloud deployment model:https://brainly.com/question/13934016

#SPJ11

Application software is B: specific tasks like word processors, web browsers, email clients, applications, games, etc.

Unlike the operating system and utilities, which are responsible for managing and maintaining the computer system, application software is designed to provide users with tools to perform specific tasks. Application software can range from simple programs like text editors and calculators to complex applications used in industries like healthcare, finance, and engineering.

Application software is designed to interact with the operating system and other system resources, such as input/output devices, memory, and storage, to perform its tasks. It can be developed for a variety of platforms, including desktop computers, mobile devices, and cloud-based systems.

Keyboard and mouse are input devices used to interact with application software, while patches are updates to software programs designed to fix bugs and vulnerabilities or add new features.

You can learn more about Application software at

https://brainly.com/question/29988566

#SPJ11

To get permission to install software on Ubuntu Linux, you would need to use the sudo command. Sudo stands for "superuser do" and allows you to execute commands as the superuser or administrator.

Here are the steps to use the sudo command:Open a terminal window by pressing Ctrl+Alt+T on your keyboard.Type in the command you want to run, for example, "sudo apt-get install [package name]".Press Enter on your keyboard.You will be prompted to enter your password. Type in your user password and press Enter.If the password is correct, the command will be executed with administrative privileges, allowing you to install the software.Note: Only use the sudo command for commands that require administrative privileges. Using the sudo command can be dangerous, so it's important to be careful and only use it when necessary.

To learn more about Linux click the link below:

brainly.com/question/13267082

#SPJ4

It may consist of transcripts of conversations, written assignments, recordings of oral language evaluations, and other documentation of the student's language competence.

The process of gathering, compiling, and preserving written or digital records of information is referred to as documentation. It is a necessary tool for a variety of occupations, such as those in healthcare, education, and business. Documentation is essential in the context of education for monitoring student progress, recording learning goals, and assessing results. It enables educators to document observations, evaluations, and other information that can be utilised to decide on instructional approaches and student requirements. Due to the fact that it serves as a record of the actions and decisions made, documentation also aids in ensuring accountability and transparency. Communication, cooperation, and decision-making can all be improved with the use of effective documentation techniques, both inside and outside of the classroom.

Learn more about  documentation here:

https://brainly.com/question/11440049

#SPJ4

Data warehouse databases reflect the ever-growing demand for greater scope and depth in the data on which decision support systems increasingly rely.

Data warehouses are specifically designed to support decision-making activities by providing a large, integrated, and historical database that can be used for data analysis, reporting, and business intelligence. They are designed to handle large volumes of data from multiple sources and to provide users with easy access to the data they need. Data warehouses also typically include tools for data cleaning, data integration, and data transformation to ensure that the data is accurate, consistent, and meaningful.

Overall, data warehouses are a critical component of modern decision support systems, enabling organizations to make better decisions based on a deeper understanding of their data.

You can learn more about data warehouse  at

https://brainly.com/question/25885448

#SPJ11

Option d is correct, Fuser is the printer consumables which is most likely causing the issue.

The issue described, where printouts have double images imposed on them, is a common symptom of a faulty fuser in a laser printer.

The fuser is responsible for bonding toner to the paper, and if it is not functioning properly, it can cause double images or smudging on the printouts.

Given the lack of maintenance kit installation for over a year, it is highly likely that the fuser needs to be replaced or repaired.

To learn more on Fuser click:

https://brainly.com/question/14902244

#SPJ2

The given statement "c does not perform array bounds checking, making it possible for you to assign a pointer the address of an element out of the boundaries of an array" is TRUE.

The array is the set of values of the same data type that can be stored sequentially in memory using a single name. You can consider it as a set of containers that hold a particular type of data with a unique name. For example, an array can store ten values of the int data type. However, it is a bit of a double-edged sword.

On one hand, the array can improve the efficiency of the program's operation, and on the other hand, it can also put the system in danger if not used correctly. One example of it is array bounds checking.

Most programming languages that support arrays perform bounds checking to ensure that the array is only accessed within the bounds of the memory allocated for it. However, in the case of C, it does not perform any such checks, and if you try to access an array's elements beyond its bounds, it will generate an error.

It is also possible to assign a pointer the address of an element out of the boundaries of an array in C. However, the program will not check whether the address is in the array boundaries or not. It can cause a variety of errors, including program crashes or security vulnerabilities.

Learn more about address: https://brainly.com/question/19726435

#SPJ11

Among the three options, the requirement for a computer to access the internet is a wired connection using either an ethernet or fiber optic cable (option i).

This is because a wired connection allows the computer to connect to a modem or router, which then connects to the internet service provider (ISP) and provides access to the internet.

A monthly payment to the Internet Engineering Task Force (option ii) is not a requirement for accessing the internet. The Internet Engineering Task Force (IETF) is a standards organization that develops and promotes internet standards, but it does not provide internet access.

The ability to connect that computer to another internet-connected device (option iii) is also not a requirement for accessing the internet, although it may be necessary for some specific applications or scenarios.

Read more about internet access here:

https://brainly.com/question/529836

#SPJ1

Answer:

lll only

Explanation:

i got it right

To find the highest rated apps with a user rating of at least 4.6, have at least 1000 reviews, and does not have a content rating of ‘Everyone’, you would need to have access to the app store or platform where the apps are listed.

From there, you would need to filter the apps based on their user rating and the number of reviews they have received. Then, you would need to further filter the apps based on their content rating to exclude those with a rating of ‘Everyone’.

To find the total number of apps for each of the 6 content rating categories, you would need to have access to the app store or platform where the apps are listed. From there, you would need to group the apps based on their content rating and count the number of apps in each group.

To find the top 3 highest rated apps in the category of ‘TOOLS’ that have more than 225,000 reviews, you would need to have access to the app store or platform where the apps are listed. From there, you would need to filter the apps based on their category and the number of reviews they have received. Then, you would need to rank the remaining apps based on their user rating and select the top 3. Finally, you would need to find positive reviews for each of the top 3 apps and include them in a visualization.

Learn more about apps here brainly.com/question/11070666

#SPJ4

The Cisco router will exclude IP addresses between 10.0.15.1 and 10.0.15.15  from being leased to DHCP clients when a network technician issues the command "ip dhcp excluded-address 10.0.15.1 10.0.15.15" on the Cisco router.

On Cisco routers, you can configure the "ip dhcp excluded-address" command to prevent any particular IP addresses from being leased to DHCP clients. DHCP (Dynamic Host Configuration Protocol) is a network protocol that automatically allocates IP addresses and other network configuration information to devices on a network. Network administrators can reserve specific IP addresses for other purposes and prevent DHCP clients from receiving those addresses by using the "ip dhcp excluded-address" command. When managing a large number of networked devices, this can be very helpful because it enables administrators to make sure that crucial devices are always given the right IP addresses.

Learn more about ip dhcp excluded-address here:

https://brainly.com/question/30591556

#SPJ4

The most distinguishing feature of the use of a client-server processing model over an old mainframe configuration is the distribution of computing power.

A client-server processing model is a distributed application structure that partitions tasks or workload between service providers and service requesters, called clients. Each computer in the client-server model operates as either a client or a server. The server provides services to the clients, such as data sharing, data manipulation, and data storage.

The client requests services from the server, allowing for the distribution of processing responsibilities between the two entities. In this model, the server is responsible for storing data, while the client is responsible for data retrieval. A mainframe configuration is an older computing model that is centralized, where the mainframe performs all computing activities.

All users are linked to the mainframe, which stores all data and applications, as well as handles all processing responsibilities. Mainframes can handle a large amount of data and have a lot of processing power, but they are inflexible and can be difficult to scale. The distribution of computing power is the most distinguishing feature of the use of a client-server processing model over an old mainframe configuration.

In the client-server model, processing power is distributed between the client and the server. In a mainframe configuration, however, all computing power is centralized, with the mainframe handling all processing responsibilities.

Learn more about client-server processing model here:

https://brainly.com/question/31060720

#SPJ11

False. Despite training, employees can still be a source of risk and attack. Additionally, external threats such as hackers, foreigners, and competitors are difficult to mitigate and protect against.

Employees are not always well trained and can still be a source of risk and attack. Additionally, external threats such as hackers, foreigners, and competitors are difficult to mitigate and protect against.

Employees should be given regular training on how to protect themselves and the company's information, and businesses should have measures in place to protect their data, such as firewalls, encryption and other security measures.

Additionally, businesses should ensure they are using the latest security patches and updates and regularly test their systems for any vulnerabilities.

Learn more about employee performance here:

https://brainly.com/question/27953070

#SPJ1

To identify all of the one-to-many relationships in the database as well as the field used in both tables to make the connection using the following pattern found in SQL when connecting two tables using the WHERE or INNER JOIN clause in Access, open the Relationships window. Given that an example of one of the relationships is given as a guide, the other relationships can be recognized with the help of the ER Diagram or Table Relationships.

The ER Diagram is a logical or conceptual representation of an enterprise's data. It is used to depict the various connections between tables or entities in the system. For each pair of tables that are linked in a one-to-many relationship, the table on the 'one' side should be listed first, followed by the table on the 'many' side.

Access allows the creation of relationships between tables or entities. The Relationships window allows you to see how the various tables in a database are connected. Relationships are formed based on one or more fields that link two tables. These links are formed by selecting the relevant field in each table that is shared between the two tables in the Relationships window. Here is the pattern:

Table1 INNER JOIN Table2 ON Table1.

Field1 = Table2.

Field1

For Example, let's say we have a table of Customers and a table of Orders, where the CustomerID is the field that links the two tables. Here are the relationships:

Here's the SQL:

Learn more about SQL: https://brainly.com/question/29216782

#SPJ11

Unified communications (UC) is an umbrella term for integrated, multi-media communications controlled by an individual user for both business and social purposes. UC integrates all of the following except: b. data.

Unified Communications (UC) is an all-in-one communications system that combines the integration of real-time communication tools like voice, instant messaging (IM), video conferencing, desktop sharing, data sharing, and more, with non-real-time communication tools like email, voicemail, SMS, and fax.The primary objective of Unified Communications (UC) is to unify all communication channels and tools, making communication more straightforward, faster, and more efficient. UC technology also integrates these different channels into a single interface or platform, allowing users to access and manage them all from one place.  Therefore, UC integrates all of the following except data.

Learn more about Unified communications: https://brainly.com/question/30177142

#SPJ11

Answer:software, instructions that tell a computer what to do. Software comprises the entire set of programs, procedures, and routines associated with the operation of a computer system. The term was coined to differentiate these instructions from hardware—i.e., the physical components of a computer system.

Explanation:

The number of clusters chosen fits this dataset well when exploring K-means. The correct answer is b.

Learn more about  K-means here: https://brainly.com/question/17241662

#SPJ11

A network monitoring server might be helpful for Venus to achieve her goal of becoming more proactive in her responses to network occurrences.

Proactive monitoring in the context of monitoring products typically entails spotting potential problems with IT infrastructure and apps before users discover them and complain and taking steps to stop the problem from being visible to users and having an adverse impact on the business.

We define and categorise four forms of monitoring—surveillance, implementation, efficacy, and ecological effects—each of which is intended to address a distinct set of objectives.

To know more about network visit:-

https://brainly.com/question/14276789

#SPJ1

When an organization seeks transference of information security risk, it is likely to purchase (F) cyber liability insurance.

Cyber liability insurance helps organizations protect against financial losses from cybersecurity incidents such as data breaches, network damage, and cyber extortion. The insurance policy covers the cost of legal fees, customer notification, credit monitoring, data recovery, and any other costs associated with the breach. By purchasing cyber liability insurance, the organization transfers the financial risk of a cybersecurity incident to the insurance company, reducing its own financial liability.

You can learn more about Cyber liability insurance at

https://brainly.com/question/28524123

#SPJ11

The term which best describes the KPI that Homer is revising at his company is RTO because it is a metric used to define the amount of time within which services must be restored after a failure.

RTO stands for Recovery Time Objective. In a disaster recovery strategy, RTO is a critical component for determining how long an enterprise can operate without critical systems before experiencing unacceptable losses.An RTO determines how long an organization's business processes and operations can survive before a service interruption or application outage occurs.

The RTO is based on the criticality of the business process, system availability requirements, and the company's overall business continuity policy. Thus, the Recovery Time Objective is the maximum tolerable length of time that a computer, system, network, or application can be down following a failure before the loss of organization or system functionality has unacceptable consequences.

MTBF, or Mean Time Between Failures, is a statistical measure of the average time a product or system will perform satisfactorily. This measure is widely used in the manufacturing and engineering industries to determine the reliability of a product or system.

MTRR, or Memory Type Range Registers, is a CPU feature that specifies how system memory can be accessed. RPO, or Recovery Point Objective, is a metric used to define the maximum amount of time that an organization's processes or data can be lost following a service interruption or disaster. An RPO determines the amount of data loss an organization can tolerate before experiencing unacceptable business impacts or consequences.

You can learn more about Recovery Time Objective at: brainly.com/question/28386707

#SPJ11

To fix the issue where the default permission settings do not grant Local Activation permission for COM server application with Clsid, you can follow these steps: Click the Start and search dcomcnfg, click on DCOM Config, Properties, Security tab, Launch and Activation Permissions, Local Service and Restart your computer.

These steps should grant Local Activation permission for the specified COM server application with Clsid, and should resolve the issue with default permission settings.

Learn more about  default permission settings :https://brainly.com/question/30082022

#SPJ11

The following are the true properties of multidimensional scaling (MDS) in the given question: An MDS projection can be rotated and/or reflected without changing how it is interpreted In the 2D projection created by MDS, the axes correspond to high-dimensional variance axes.

1. An MDS always reduces a high-dimensional space to a 2D projection. This statement is false as MDS can reduce high-dimensional space to 3D projection as well.

2. MDS removes outliers from the dataset, so none appear in the 2D projection. This statement is false.

3. Each of the points in the MDS 2D projection corresponds to a high-dimensional column from the original data frame.  This statement is false.

4. In the 2D projection created by MDS, the axes have no meaning. This statement is false. Multidimensional scaling (MDS) is a way to visualize similarities and differences between sets of data points. MDS reduces a high-dimensional dataset to a low-dimensional dataset for visualization purposes. The properties of MDS include that it can be rotated and/or reflected without changing how it is interpreted, and the axes correspond to high-dimensional variance axes in the 2D projection created by MDS.

Learn more about MDS visit:

https://brainly.com/question/29809025

#SPJ11