Answer:
1) Tailored software Library management system
2) Utility software Scan viruses
3) Operating system Used to coordinate the hardware of the computer
4) Packaged software set of programs Microsoft office
Explanation:
1) A tailored software, also known as a custom software, is one that is designed and tailor-made only for a particular organisation
2) A utility software is a computer maintenance and analysis software used to enable proper functioning of the computer by performing restorative and maintenance tasks
3) Operating system software
The operating system software controls the operation of the computer hardware within the system and enables the operation of other programs in the computer
4) Packaged software are a collection of programs that are oriented to perform interrelated tasks that a focused to a particular area, such as Microsoft Office.
THE LENGTH OF A PENDULUM IS (1.5±0.01)m AND THE ACCELERATION DUE TO GRAVITY IS TAKEN AS (9.8±0.1)ms-² calculate the time period of the pendulum with uncertainty in it
Answer:
2.4583 ± 0.0207 seconds
Explanation:
The time period of a pendulum is approximately given by the formula ...
T = 2π√(L/g)
The maximum period will be achieved when length is longest and gravity is smallest:
Tmax = 2π√(1.51/9.7) ≈ 2.47903 . . . seconds
The minimum period will be achieved for the opposite conditions: minimum length and maximum gravity:
Tmin = 2π√(1.49/9.9) ≈ 2.43756 . . . seconds
If we want to express the uncertainty using a symmetrical range, we need to find half their sum and half their difference.
T = (2.47903 +2.43756)/2 ± (2.47903 -2.43756)/2
T ≈ 2.4583 ± 0.0207 . . . seconds
__
We have about 2+ significant digits in the given parameters, so the time might be rounded to 2.46±0.02 seconds.
The distance from the Earth to the Sun equals 1 AU. Neptune is 30 AU from the Sun. How far is Neptune from the Earth? AU
Answer:
The answer is 29 AU
Hoped I helped
mark me as brainliest
Answer:
29
Explanation:
obesity occurs due to (a) overeating of carbohydrates and fats(b) not eating enough carbohydrates and fats (c) overeating of vitamins and minerals (d) not eating enough vitamins and minerals
Answer:
B for BIG
Explanation:
carbs and fats is energy, if not being use or burned off, it'll be becomes body fat.
A spring of initial length 35 cm acquires a length of 55 cm when we hang from it a mass of 3.5 kg. Calculate:
a) The elastic constant of the spring.
b) The length of the spring when we hang a mass of 5 Kg.
Answer:
the elastic constant of the spring=1.715
the length of the spring=0.28
Explanation:
we know that according to hooks law
F=-k x
F= force
k= elastic constant
x= extension or compression
given
length change from 35cm to 55 cm so delta x = L2-L1= 55-35=20 cm
now to find k we need F and F =ma
M for part a is 3.5 kg
so F=3.5 kg *9.8=34.3
now k=F/x
k=34.3/20=1.715 N/cm=171.5 N/m
now to find length given mass is 5 kg so
F= ma
F=5*9.8=49 N
so x =F/k
x=49/171.5
x=0.28
A metal disk lies in the xy-plane, centered about the origin, and rotates with a constant angular velocity about the z-axis. There is a uniform 0.0314 T magnetic field parallel to the z-axis. The radius of the disk is 1.56 m. At what rate is the disk turning if an E of 3.86 V develops between the center of the disk and a point on its rim
Answer:
w = -101 rad / s
Explanation:
For this exercise we will use Faraday's law
E = - dФ / dt
where the magnetic flux is
Ф = B. A = B A cos θ
In this case, the angle between the magnetic field and the normal to the disk is zero, cos 0 = 1, they indicate that the field is constant, let's find the area
The area rotated by the disk is
A = ½ r s
if we express the angles in radians
θ = s / r
s = r θ
where is the arc supported
A = ½ r (r θ)
let us substitute in the Faraday equation
E = - d (B ½ r² θ) / dt
E = - ½ B r² dθ/dt
the definition of angular velocity is
w = dθ/dt
E = - ½ B r² w
w = - 2E / B r²
let's calculate
w = - 2 3.86 / (0.0314 1.56²)
w = -101 rad / s
What is a hypothesis?
A. A piece of information gathered during an experiment
OB. A source that summarizes a primary source
O C. Something that a scientist intentionally changes during an
experiment
O D. An educated guess about the outcome of an experiment
Answer:
D!!!!!
Explanation:
A hypothesis is a supposition or proposed explanation made on the basis of limited evidence as a starting point for further investigation.
Answer:
D. An educated guess about the outcome of an experiment.
Explanation:
Hypothesis is an educated guess about the outcome of an experiment.
Hope this helps ;) ❤❤❤
a. Define Valency. b. Write the symbol and valency of the following : (i) Oxygen (ii) potassium 7. a. Magnesium burns in Oxygen to form Magnesium Oxide. a) Name the reactants b) Name the Products c) Write the word equation for the above reaction.
Answer:
Oxygen-Symbol-O Potassium Symbol-K
A) Valency is the combining capacity of any element. Valence electrons refers to the electrons found in the outermost shell of the atom of the element.
B) Symbol and valency:
Oxygen(O) = (At. no. 8) = -2(Valency)Potassium(K) = (At. no. = 19) = +1(Valency)C) The reaction would be:
[tex] \large{ \boxed{ \rm{2Mg + O_2 \longrightarrow \: 2MgO}}}[/tex]
Reactants = Magnesium and Oxygen Products = Magnesium oxideWord equation:[tex] \large{ \boxed{ \rm{Magnesium + Oxygen \longrightarrow Magnesium oxide.
}}}[/tex]
━━━━━━━━━━━━━━━━━━━━
A construction worker uses an electrical device to attract fallen nails and sharp objects
from a construction site. What is causing the attraction of the metal objects?
O An electrical wave oscillating perpendicular to the electrical device.
O An electrical charge radiating perpendicular to the wire
O Amagnetic wave radiating perpendicular to an electrical device
O A magnetic wave and electrical current moving in opposite directions
Answer:
is the last one, a magnetic wave and electrical current moving in opposite directions
Explanation:
opposite directions always attract in magnetic waves and fields
The transmutation of a radioactive uranium isotope, 234/92U , into a radon isotope, 222/86Rn , involves a series of three nuclear reactions. At the end of the first reaction, a thorium isotope,230/90Th , is formed and at the end of the second reaction, a radium isotope, 226/88Ra , is formed. In both the reactions, an alpha particle is emitted. Write the balanced equations for the three successive nuclear reactions.
Answer:
See explanation below
Explanation:
234/92U--------> 230/90Th + 4/2He
230/90Th----->226/88Ra + 4/2He
There are various modes of radioactive decay. One of them is alpha decay.
Alpha decay involves the loss of an alpha particle from a nucleus. When this occurs, the mass number of the daughter nucleus is four units less than that of the parent while the atomic number of the daughter nucleus is two units less than that of its parent as shown in the equations above.
An alpha particle is akin to a helium nucleus in terms of mass and charge
A parallel-plate capacitor has square plates that are 7.40 cm on each side and 3.20 mm apart. The space between the plates is completely filled with two square slabs of dielectric, each 7.40 cm on a side and 1.60 mm thick. One slab is Pyrex glass and the other slab is polystyrene. If the potential difference between the plates is 84.0 V, find how much electrical energy (in nJ) can be stored in this capacitor.
Answer:
The energy that can be stored in the capacitor is 239 nJ
Explanation:
We first calculate the capacitance of each material. Let C₁ be the capacitance of pyrex glass and C₂ be the capacitance of polystyrene.
C₁ = κ₁ε₀A/d where κ₁ = dielectric constant of pyrex glass = 5, A = area of plates = L² where L = length of square plate = 7.40 cm = 7.40 × 10⁻² m and d = thickness of pyrex slab = 1.60 mm = 1.60 × 10⁻³ m and ε₀ = permittivity of free space = 8.854 × 10⁻¹² F/m
C₁ = κ₁ε₀A/d = κ₁ε₀L²/d = 5 × 8.854 × 10⁻¹² F/m × (7.40 × 10⁻² m)²/1.60 × 10⁻³ m = 2424.2252/1.60 × 10⁻¹¹ F = 1515.14 × 10⁻¹¹ F = 15.2 × 10⁻⁹ F = 15.2 nF
C₂ = κ₂ε₀A/d where κ₂ = dielectric constant of polystyrene = 3, A = area of plates = L² where L = length of square plate = 7.40 cm = 7.40 × 10⁻² m and d = thickness of polystyrene slab = 1.60 mm = 1.60 × 10⁻³ m and ε₀ = permittivity of free space = 8.854 × 10⁻¹² F/m
C₁ = κ₁ε₀A/d = κ₁ε₀L²/d = 3 × 8.854 × 10⁻¹² F/m × (7.40 × 10⁻² m)²/1.60 × 10⁻³ m = 1454.5351/1.60 × 10⁻¹¹ F = 909.08 × 10⁻¹¹ F = 9.09 × 10⁻⁹ F = 9.09 nF
Since the capacitors are in series, we find their effective capacitance C from
1/C = 1/C₁ + 1/C₂
C = C₁C₂/(C₁ + C₂)
= 15.2 × 10⁻⁹ F × 9.09 × 10⁻⁹ F/(15.2 × 10⁻⁹ F + 9.09 × 10⁻⁹ F)
= 138.168 × 10⁻¹⁸/24.29 × 10⁻⁹ F
= 5.69 × 10⁻⁹ F
The amount of electrical energy stored in a capacitor is given by W = 1/2CV² where C = capacitance and v = voltage applied. Now C = 5.69 × 10⁻⁹ F and V = 84.0 V for this capacitor
So W = 1/2 × 5.69 × 10⁻⁹ F × 84.0 V
= 238.98 × 10⁻⁹ J
≅ 239 × 10⁻⁹ J
= 239 nJ
So the energy that can be stored in the capacitor is 239 nJ
Help please answer the two questions
Explanation:
this is it. hope u understand
In a Young's double-slit experiment, a set of parallel slits with a separation of 0.102 mm is illuminated by light having a wavelength of 575 nm and the interference pattern observed on a screen 3.50 m from the slits.(a) What is the difference in path lengths from the two slits to the location of a second order bright fringe on the screen?(b) What is the difference in path lengths from the two slits to the location of the second dark fringe on the screen, away from the center of the pattern?
Answer:
Rounded to three significant figures:
(a) [tex]2 \times 575\; \rm nm = 1150\; \rm nm = 1.15\times 10^{-6}\; \rm m[/tex].
(b) [tex]\displaystyle \left(1 + \frac{1}{2}\right) \times (575\;\rm nm) \approx 863\; \rm nm = 8.63\times 10^{-7}\; \rm m[/tex].
Explanation:
Consider a double-slit experiment where a wide beam of monochromatic light arrives at a filter with a double slit. On the other side of the filter, the two slits will appear like two point light sources that are in phase with each other. For each point on the screen, "path" refers to the length of the segment joining that point and each of the two slits. "Path difference" will thus refer to the difference between these two lengths.
Let [tex]k[/tex] denote a natural number ([tex]k \in \left\lbrace0,\, 1,\, 2,\, \dots\right\rbrace[/tex].) In a double-split experiment of a monochromatic light:
A maximum (a bright fringe) is produced when light from the two slits arrive while they were in-phase. That happens when the path difference is an integer multiple of wavelength. That is: [tex]\text{Path difference} = k\, \lambda[/tex].Similarly, a minimum (a dark fringe) is produced when light from the two slits arrive out of phase by exactly one-half of the cycle. For example, The first wave would be at peak while the second would be at a crest when they arrive at the screen. That happens when the path difference is an integer multiple of wavelength plus one-half of the wavelength: [tex]\displaystyle \text{Path difference} = \left(k + \frac{1}{2}\right)\cdot \lambda[/tex].MaximaThe path difference is at a minimum (zero) at the center of the screen between the two slits. That's the position of the first maximum- the central maximum, a bright fringe where [tex]k = 0[/tex] in [tex]\text{Path difference} = 0[/tex].
The path difference increases while moving on the screen away from the center. The first order maximum is at [tex]k = 1[/tex] where [tex]\text{Path difference} = \lambda[/tex].
Similarly, the second order maximum is at [tex]k = 2[/tex] where [tex]\text{Path difference} = 2\, \lambda[/tex]. For the light in this question, at the second order maximum: [tex]\text{Path difference} = 2\, \lambda = 2 \times 575\; \rm nm = 1.15\times 10^{-6}\; \rm m[/tex].
Central maximum: [tex]k = 0[/tex], such that [tex]\text{Path difference} = 0[/tex].First maximum: [tex]k = 1[/tex], such that [tex]\text{Path difference} = \lambda[/tex].Second maximum: [tex]k = 2[/tex], such that [tex]\text{Path difference} = 2\, \lambda[/tex].MinimaThe dark fringe closest to the center of the screen is the first minimum. [tex]\displaystyle \text{Path difference} = \left(0 + \frac{1}{2}\right)\cdot \lambda = \frac{1}{2}\, \lambda[/tex] at that point.
Add one wavelength to that path difference gives another dark fringe- the second minimum. [tex]\displaystyle \text{Path difference} = \left(1 + \frac{1}{2}\right)\cdot \lambda[/tex] at that point.
First minimum: [tex]k =0[/tex], such that [tex]\displaystyle \text{Path difference} = \frac{1}{2}\, \lambda[/tex].Second minimum: [tex]k =1[/tex], such that [tex]\displaystyle \text{Path difference} = \left(1 + \frac{1}{2}\right)\cdot \lambda[/tex].For the light in this question, at the second order minimum: [tex]\displaystyle \text{Path difference} = \left(1 + \frac{1}{2}\right)\cdot \lambda = \left(1 + \frac{1}{2}\right)\times (575\; \rm nm) \approx 8.63\times 10^{-7}\; \rm m[/tex].
A body decelerates uniformly to a constant speed and after some time it accelerates uniformly Draw the shape of speed time graph for such a motion . Label the three sections of this graph. What is the quantity which is measured by the area occupied under speed time graph ?
Answer:
here I am just giving an idea of how the graph will be like ...
In the pic..
Hope it helped u if yes mark me BRAINLIEST!
Tysm!
:)
3) A charged particle is moving with velocity of V in a magnetic field of B, which one of the followings is correct: A) The direction of force F on the charge is parallel to magnetic field B B) The direction of force F on the charge is parallel to velocity direction V C) The force is maximized when velocity direction and magnetic field are parallel D) The force F is perpendicular (normal) to both velocity V and magnetic field B E) The direction of force on positive charge or negative charge would be the same
Answer:
D) The force F is perpendicular (normal) to both velocity V and magnetic field B.
Explanation:
When a charged particle enters a magnetic field, it experiences a force which changes its direction of travel. The direction of motion of the charged particle, the magnetic field direction, and the direction of the force, are all perpendicular to one another. According to Lorentz right hand rule, hold the right hand parallel to the ground, with the palm facing up, and the thumb held out at right angle to the other fingers. If the direction of the other fingers represents the magnetic field line and direction, and the thumb represents the direction of motion of a positively charged particle, then, the palm will push up in the direction of the force. For a negatively charged particle, the force will push down in the direction of the back of the hand.
PLZ HELP ASAP!!!! THANK YOU The disturbance that occurs as longitudional waves travel through a medium can be described as a series of A:oscillations and refractions B:propagations and compressions C:destructions and constructions D:rarefactions and compressions
Answer:
D:rarefactions and compressions
Explanation:
Longitudinal waves are readily formed in materials such as a stretched spring. Longitudinal waves are waves which travel in a direction parallel to the vibrations of the medium.
Longitudinal waves are characterized by a series of compressions and rarefactions. The compressions are areas of clusters while rarefactions are areas of expansions. The same can be observed in a sound wave.
An average skater averages 11 m/s over the first 5 seconds of a race. find the average speed required over next 10 seconds to average 12 m/s overall.
Answer:
usa
Explanation:
Which of the following is the correct equation to calculate electrical energy? P = I/V V = P × I P = I × V E = P × t
You haven't told us what any of those letters represents.
I'm going to assume that ...
-- ' P ' = power
-- ' I ' = circuit current
-- ' V ' = circuit voltage
-- ' E ' = energy
-- ' t ' = time.
Now I'm ready to answer the question that I just invented.
P = I / V
V = P x I
Both of these are false statements, and can't be used to calculate anything.
P = I x V is the correct equation to calculate electrical power.
E = P x t is the correct equation to calculate electrical energy.
A wave is represented by the equation y = 0.20 sin [ 0.4π (x – 60t)], where x and y are in cm and t is in s. The velocity of the wave is...
Answer:
v = 60 m/s
Explanation:
It is given that,
A wave is represented by the equation :
[tex]y=0.2\sin [0.4\pi (x-60)t][/tex]
We need to find the velocity of the wave
The general equation of a wave is given by :
[tex]y=A\sin (kx-\omega t)[/tex] ....(1)
Equation (1) can be written as :
[tex]y=0.2\sin (0.4\pi x-24\pi t)[/tex] ...(2)
If we compare equation (1) and (2) we get :
[tex]k=0.4\pi[/tex]
[tex]\omega=24\pi[/tex]
The velocity of a wave is given by :
[tex]v=\dfrac{\omega}{k}\\\\v=\dfrac{24\pi}{0.4\pi}\\\\v=60\ m/s[/tex]
So, the velocity of the wave is 60 m/s.
All large radioactive atoms decay into smaller atoms by releasing alpha particles. Each alpha particle has 2 protons, 2 neutrons, and 0 electrons. The table below describes several neutral, low-mass atoms.
A 4-column table with 4 rows, labeled Stable Isotopes of Low-Mass Elements. The first column labeled element name has entries hydrogen, helium, lithium, beryllium. The second column labeled symbol has entries H, H e, L i, B e. The third column labeled atomic number has entries 1, 2, 3, 4. The fourth column labeled number of neutrons has entries 0, 2, 4, 5.
An alpha particle is also referred to as a nucleus of which isotope?
lithium-7
helium-4
hydrogen-2
helium-2
Answer: Helium=4 is the answer
Explanation:
took the test and got it right that'
s the answer.
Answer:
It's b
Explanation:
I took the quiz on EDGE and got it right.
A fish inside the water 12cm below the surface looking up through the water sees the outside world contained in a circular horizon. If the refractive index of water is 4/3 the radius of circle is
Answer:
13.6 cm
Explanation:
From Snell's law:
n₁ sin θ₁ = n₂ sin θ₂
In the air, n₁ = 1, and light from the horizon forms a 90° angle with the vertical, so sin θ₁ = sin 90° = 1.
Given n₂ = 4/3:
1 = 4/3 sin θ
sin θ = 3/4
If x is the radius of the circle, then sin θ is:
sin θ = x / √(x² + 12²)
sin θ = x / √(x² + 144)
Substituting:
3/4 = x / √(x² + 144)
9/16 = x² / (x² + 144)
9/16 x² + 81 = x²
81 = 7/16 x²
x ≈ 13.6
2 Which invention was crucial to the development of cell theory?
Answer:
I guess i would say the microscope
Explanation:
Because of the microscope, we can see the cells.
One glass microscope slide is placed on top of another with their left edges in con- tact and a human hair under the right edge of the upper slide. As a result, a wedge of air exists between the slides. An interference pattern results when monochromatic light is incident on the wedge. What is observed at the left edge of the slides? a. A dark fringe b. A bright fringe c. Impossible to determine
Answer:
A dark fringe
Write the relation between:
1) applied force and pressure.
2) surface area of contact and pressure.
realtion between applied force.and pressure is more force exerts more pressure whereas less force exerts less pressure
confused in another one
Answer:
See below
Explanation:
1) Applied Force and Pressure
Pressure = Force / Area
This shows that Applied force and pressure are in direct relationship. This means that If the Applied force is more, the Pressure is also More and vice versa.
2) Surface Area of Contact and Pressure
Pressure = Force / Surface Area of Contact
This shows that Pressure and Surface area of contact are inversely related. This means that if pressure is increased on an object, the surface area of contact decreases and vice versa.
a object 1.5cm high produces a real image 2cm high. placed at a distance of 20cm
from a concave mirror calculate: [a] the position of the image [b] focal lenght of the concave mirror
Answer:
a. 26.7 cm. b. 11.4 cm.
Explanation:
a. We know h'/h = d'/d where h' = image height = + 2 cm (since it is a real image), h = object height = + 1.5 cm, d' = image distance from mirror and d = object distance from mirror = 20 cm
So, from h'/h = d'/d
d = h'd/h
= 2 cm × 20 cm/1.5 cm
= 40/1.5 cm
= 26.67 cm
≅ 26.7 cm
The position of the image is 26.7 cm from the mirror
b. Using the mirror formula
1/d + 1/d' = 1/f where d = object distance from mirror = + 20 cm, d' = image distance from mirror = + 26.7 cm (its positive since its a real image) and f = focal length of mirror.
So, 1/d + 1/d' = 1/f
⇒ f = dd'/(d + d')
= 20 cm × 26.7 cm/(20 cm + 26.7 cm)
= 534/46.7
= 11.43 cm
≅ 11.4 cm
The focal length of the mirror is 11.4 cm
what is SI unit System ? why has SI system been developed ? Give reasons
Explanation:
SI is the international system of units
It was developed to express magnitudes and quantities
6. What are the methods to control noise pollution?
Answer: Some of the ways to control noise pollution are as follows: (1) Control at Receiver's End (2) Suppression of Noise at Source (3) Acoustic Zoning (4) Sound Insulation at Construction Stages (5) Planting of Trees (6) Legislative Measures.
Answer:
You have to:
a) Improve your insulation.
b) Install a fence
c) Use modern Acoustic wall panels
d) Plant trees
e) Reduce electronic volumes,e.t.c.
Explanation:
okay.
Pls help! If you know the answer
Answer:
-40
Explanation:
-40= (9/5)(-40) + 32
=-72 + 32
-40=-40
explore how archemides principle is applied in building a ship and submarine
Answer:
Principle Archimedes is applied in building a ship and submarine using the manipulating that buoyancy, is controlled the ballast tank system.
Explanation:
Submarine is rather had they focused on main parts of the submarine,he is complex and long process implementation,the most submarine design like submarine stability.
Submarine stability is complete and the fundamental Archimedes principle to arrive the weight of submarine is equal to buoyancy force.
Submarine into the parts and components of ballast tank the sequence in diving and surfacing,there two vital parts:- flood parts and air vents
flood parts:- at the bottom position and allow water to enter or leave that tank.
air vents:- air vents at the top of the pressure hall,and that they submarine dive.
this time submarine is most modern system is depth is 300 to 450 meters,high pressure air is 15 bar is tank air valve.
submarine is basic of the effective volume of all the submarine surfaced condition,submarine minus to the free water flood is equal to the fully pressure hull,submarine is the surfaced condition.
What type of psychologist would help a place of business or a company find the best ways to help their employees and customers? Group of answer choices forensic psychologist health psychologist industrial organizational psychologist developmental psychologist
Answer:
The correct option is;
Industrial organizational psychologist
Explanation:
Industrial organizational psychology is a branch of the study of psychology that looks into the application of psychological principles and theories in industrial and organizational settings.
An industrial organizational psychologist provide support to organizations such analyzing orientation and behavior, assessment of the organization, training company personnel on how to be or become a good leader, design and development of organizational products , analysis of customer choices, the satisfaction of the customers, and the strategy the organization follows in marketing of their products such as to increase awareness and understanding of human behavior in a workplace setting.
A group of Advanced Open Water Divers plans to make two dives. The first dive is on a reef in 90 feet of water for 20 minutes. The group then remains on the surface for 1 hour. The second dive is on a wreck in 60 feet of water, with a planned bottom time of 30 minutes. What will be the ending pressure group after the second dive
Answer:
The ending pressure is R.
Explanation:
This is Recreational scuba diving (R). According to standards, this diving has prescribed depth limit of 130 ft. This means that the limit must include a depth that is not greater than 130 ft while using only compressed air and not even requiring a decompression stop.
Now, from the question, we can see that that there was a prescribed limit of 60ft of water with a planned bottom time of 30 minutes.
Thus, the ending pressure is R.
