McCoy Brothers manufactures and sells two products, A and Z in the ratio of 5:2. Product A sells for $75; Z sells for $95. Variable costs for product A are $35; for Z $40. Fixed costs are $418,500. Compute the break-even point in composite units.

Answer:

1,350 units

Explanation:

The computation of the break-even point in composite units is shown below;

Composition contribution margin per unit is

= ($75 - $35) × 5  + ($95 - $40) × 2

= 310

Now break-even point in composite units is

= Fixed cost ÷ Composition contribution margin per unit

= $418,500 ÷ 310

= 1,350 units

Petrox Oil Co. is considering a project that will have fixed costs of $12,000,000. The product will be sold for $37.50 per unit and will incur a variable cost of $12.80 per unit.

Given Petrox's cost structure, it will have to sell __________ units to break even on this project (Q_BE).

Petrox Oil Co.'s marketing sales director doesn't think that the market for the firm's goods is big enough to sell enough units to make the company's target operating profit of $15,000,000. In fact, she believes that the firm will be able to sell only about 150,000 units. However, she also thinks the demand for Petrox Oil Co.'s product is relatively inelastic, so the firm can increase the sale price. Assuming that the firm can sell 150,000 units, what price must it set to meet the CFO's EBIT goal of $15,000,000?

a. $192.80
b. $221.72
c. $241.00
d. $202.44

Nancy is responsible for recording workplace injuries in the OSHA (Occupational Safety and Health Administration) 300 log. Which of the following workplace injuries is exempted from being recorded for OSHA?
Marked out of 100 ingwestion
a. Injuries leading to lost time from work
b. Injuries requiring restricted duty or job transfer
c. Injuries requiring only first aid
d. Injuries causing a restriction of motor abilities

Comparing Three Depreciation Methods Dexter Industries purchased packaging equipment on January 8 for $249,400. The equipment was expected to have a useful life of four years, or 8,800 operating hours, and a residual value of $20,600. The equipment was used for 3,080 hours during Year 1, 1,848 hours in Year 2, 2,464 hours in Year 3, and 1,408 hours in Year 4. Required: 1. Determine the amount of depreciation expense for the four years ending December 31 by (a) the straight-line method, (b) the units-of-activity method, and (c) the double-declining-balance method. Also determine the total depreciation expense for the four years by each method. Round the answer for each year to the nearest whole dollar. Depreciation Expense Year Straight-Line Method Units-of-Activity Method Double-Declining- Balance Method Year 1 $fill in the blank 1 $fill in the blank 2 $fill in the blank 3 Year 2 $fill in the blank 4 $fill in the blank 5 $fill in the blank 6 Year 3 $fill in the blank 7 $fill in the blank 8 $fill in the blank 9 Year 4 $fill in the blank 10 $fill in the blank 11 $fill in the blank 12 Total $fill in the blank 13 $fill in the blank 14 $fill in the blank 15 2. What method yields the highest depreciation expense for Year 1

El 5 de diciembre se solicitó un préstamo por USD.275,000, negociado al 6.5%
de interés anual a un plazo de 5 años. Los pagos de capital e intereses se harán
mensualmente.

Makers Corp. had additions to retained earnings for the year just ended of $553,000. The firm paid out $191,000 in cash dividends, and it has ending total equity of $4.96 million. The company currently has 240,000 shares of common stock outstanding. a. What are earnings per share

Russell Inc. had sales of $2,210,000for the first quarter of 2017. In making the sales, the company incurred the following costs and expenses.
Variable Fixed
Cost of goods sold $921,000 $441,000
Selling expenses 71,000 46,000
Administrative expenses 87,000 99,000
Prepare a CVP income statement for the quarter ended March 31, 2017.

Choose the correct statements about the ROC curve.
A. By plotting the true-positive rate against the false-positive rate for different threshold values, the ROC curve can be used to select the optimal model.
B. ROC stands for Receiver Operating Characteristic curve, which was originally developed to detect enemy aircrafts on radar.
C. The ROC curve is a useful diagnostic tool for determining the optimal classification model.
D. The ROC curve was originally developed to optimize healthcare and detect congestive heart failure readmission rate.

Charlie's brother, Alexander, also consumes apples (A) and bananas (B). Alexander's utility function happens to be U(A, B) = 5A + 2B.
(a) Alexander has 40 apples and 5 bananas. The indifference curve through (40, 5) also include bundle ( _____ , 2).
(b) Alexander has 40 apples and 5 bananas. With this bundle, Alexander would like to give up _____ apple(s) for a banana.

For each of the following scenarios, indicate which of the four basic tax planning variables (entity, character, time period, jurisdiction) impacts after-tax value.

a. Aloha Corporation is considering building a new manufacturing facility in either State U or State P. State U has a 10 percent state income tax rate. State P has a 15 percent state income tax rate, but offers a tax holiday for new business investment that would exempt up to $250,000 of Aloha’s earnings from state income tax for the first five years of operations in State P.
b. Mary wishes to help her nephew, Gill, pay his college tuition. Instead of giving Gill cash, Mary gives him bonds earning $10,000 annual interest income. Mary’s marginal tax rate is 35 percent and Gill’s marginal tax rate is 15 percent.
c. Congress has recently enacted a decrease in corporate tax rates that will take effect at the beginning of next year. Grant Company, a cash basis taxpayer, is planning to pay expenses prior to year-end in order to maximize its tax savings in the current year.
d. Will has $50,000 to invest in the stock market. He is considering two alternatives. Stock A pays annual qualifying dividends of 6 percent. Stock B pays no dividends but is expected to increase in value at a rate of 5 percent per year. Will would hold either investment for a minimum of four years. Will’s marginal tax rate on ordinary income is 35 percent.

Motors are assembled in a process with two resources. The first resource has a capacity of 2 motors per hour. The capacity of the second resource is 4.5 motors per hour. Demand for this process is 2.3 motors per hour.
Instruction: Round your answer to three decimal places.
What is the cycle time of this process (in minutes)? _______minutes

On January 1, the company purchased equipment that cost $10,000. The equipment is expected to be worth about (or has a salvage value of) $1,000 at the end of its useful life in five years. The company uses straight-line depreciation. It has not recorded any adjustments relating to this equipment during the current year. Complete the necessary December 31 journal entry by selecting the account names from the pull-down menus and entering dollar amounts in the debit and credit columns.
View transaction list
Note: Enter debits before credits.
Date General Journal Debit Credit
Dec. 31 es Depreciation expense
Accumulated depreciation
Record entry Clear entry View general journal

Beck Inc. and Bryant Inc. have the following operating data: Beck Inc. Bryant Inc. Sales $336,700 $1,092,000 Variable costs 135,100 655,200 Contribution margin $201,600 $436,800 Fixed costs 138,600 268,800 Income from operations $63,000 $168,000 a. Compute the operating leverage for Beck Inc. and Bryant Inc. If required, round to one decimal place.

Company X has 2 million shares of common stock outstanding with a book value of $2 per share. The stock trades for $3 per share. It also has $2 million in face value of debt that trades at 90% of face value. What is the debt ratio that should be used to calculate WACC

Bill Johnson, sales manager, and Diane Buswell, controller, at Current Designs are beginning to analyze the cost considerations for one of the composite models of the kayak division. They have provided the following production and operational costs necessary to produce one composite kayak.
Kevlar $250 per kayak
Resin and supplies $100 per kayak
Finishing kit (seat, rudder, ropes, etc.) $170 per kayak
Labor $420 per kayak
Selling and administrative expenses—variable $400 per kayak
Selling and administrative expenses—fixed $119,700 per year
Manufacturing overhead—fixed $240,000 per year
Bill and Diane have asked you to provide a cost-volume-profit analysis, to help them finalize the budget projections for the upcoming year. Bill has informed you that the selling price of the composite kayak will be $2,000.
(a) Calculate variable costs per unit.
Variable cost per unit $
Bill Johnson, sales manager, and Diane Buswell, co
(b) Determine the contribution margin per unit.
Contribution margin per unit $
Bill Johnson, sales manager, and Diane Buswell, co
(c) Using the contribution margin per unit, determine the break-even point in units for this product line.
Break-even point
Bill Johnson, sales manager, and Diane Buswell, co
units
(d) Assume that Current Designs plans to earn $270,600 on this product line. Using the contribution margin per unit, calculate the number of units that need to be sold to achieve this goal.
Number of units
Bill Johnson, sales manager, and Diane Buswell, co
units
(e) Based on the most recent sales forecast, Current Designs plans to sell 1,000 units of this model. Using your results from part (c), calculate the margin of safety and the margin of safety ratio. (Round margin of safety ratio to 1 decimal place, e.g. 25.5%.)
Margin of safety $
Bill Johnson, sales manager, and Diane Buswell, co
Margin of safety ratio
Bill Johnson, sales manager, and Diane Buswell, co
%
By accessing this Question Assistance, you will learn while you earn points based on the Point Potential Policy set by your instructor.
(a) Calculate variable costs per unit.
Variable cost per unit $
Bill Johnson, sales manager, and Diane Buswell, co
(b) Determine the contribution margin per unit.
Contribution margin per unit $
Bill Johnson, sales manager, and Diane Buswell, co
(c) Using the contribution margin per unit, determine the break-even point in units for this product line.
Break-even point
Bill Johnson, sales manager, and Diane Buswell, co
units
(d) Assume that Current Designs plans to earn $270,600 on this product line. Using the contribution margin per unit, calculate the number of units that need to be sold to achieve this goal.
Number of units
Bill Johnson, sales manager, and Diane Buswell, co
units
(e) Based on the most recent sales forecast, Current Designs plans to sell 1,000 units of this model. Using your results from part (c), calculate the margin of safety and the margin of safety ratio. (Round margin of safety ratio to 1 decimal place, e.g. 25.5%.)
Margin of safety $
Bill Johnson, sales manager, and Diane Buswell, co
Margin of safety ratio
Bill Johnson, sales manager, and Diane Buswell, co
%

Depreciation by Units-of-activity Method A diesel-powered tractor with a cost of $259,000 and an estimated residual value of $7,400 is expected to have a useful operating life of 85,000 hours. During April, the tractor was operated 200 hours. Determine the depreciation for the month. If required, carry out any division to two decimal places.

When customers have questions about a product they've purchased, or problems using it, they can go online to the company's website to search for answers or interact with others with a similar problem. This is an example of:

A firm in a purely competitive industry has a typical cost structure. The normal rate of profit in the economy is 5 percent. This firm is earning $15 on every $150 invested by its founders. Instructions: Enter your answers as a whole number. a. What is its percentage rate of return

Can you help me
please ​

Storrer Co. identifies the following activities that pertain to manufacturing overhead, for each activity, identify an appropriate cost driver.
Activity Cost Driver

Materials handling Storrer Co. identifies the following activities th Number of Purchase OrdersMachine Hours UsedNumber of SetupsSquare Footage OccupiedNumber of RequisitionsDirect Labor HoursNumber of InspectionsNumber of Parts or AssembliesNumber of Employees
Machine setups Storrer Co. identifies the following activities th Number of Purchase OrdersNumber of EmployeesNumber of SetupsNumber of InspectionsDirect Labor HoursNumber of Parts or AssembliesSquare Footage OccupiedNumber of RequisitionsMachine Hours Used
Factory machine maintenance Storrer Co. identifies the following activities th Direct Labor HoursNumber of InspectionsNumber of EmployeesNumber of RequisitionsNumber of SetupsNumber of Purchase OrdersNumber of Parts or AssembliesSquare Footage OccupiedMachine Hours Used
Factory supervision Storrer Co. identifies the following activities th Machine Hours UsedNumber of InspectionsNumber of EmployeesNumber of Parts or AssembliesNumber of Purchase OrdersNumber of RequisitionsSquare Footage OccupiedNumber of SetupsDirect Labor Hours
Quality control Storrer Co. identifies the following activities th Number of EmployeesDirect Labor HoursNumber of InspectionsSquare Footage OccupiedNumber of RequisitionsNumber of Purchase OrdersNumber of SetupsNumber of Parts or AssembliesMachine Hours Used

Conducting a search of the story is part of store closing duties why

A depreciation adjustment would include a debit to _____________________ and __________________________ to _______________

How have engineer contributed to the society?Explain​

explain the term CEO in an organisation​

Baker Enterprises operates a midsized company that specializes in the production of a unique type of memory chip. It is currently the only firm in the market, and it earns $10 million per year by charging the monopoly price of $115 per chip. Baker is concerned that a new firm might soon attempt to clone its product. If successful, this would reduce Baker’s profit to $4 million per year. Estimates indicate that, if Baker increases its output to 280,000 units (which would lower its price to $100 per chip), the entrant will stay out of the market and Baker will earn profits of $8 million per year for the indefinite future. 1. What must Baker do to credibly deter entry by limit pricing? 2. Does it make sense for Baker to limit price if the interest rate is 10 percent?

Completing a Master Budget
Hillyard Company, an office supplies specialty store, prepares its master budget on a quarterly basis. The following data have been assembled to assist in preparing the master budget for the first quarter:
a. As of December 31 (the end of the prior quarter), the company’s general ledger showed the following account balances:
Debits
Credits
Cash
$ 48,000
Accounts receivable
224,000
Inventory
60,000,
Buildings and equipment (net)
370,000
Accounts payable
$ 93,000
Capital stock
500,000
Retained earnings
_______
109,000
$702,000
$702,000
b. Actual sales for December and budgeted sales for the next four months are as follows:
December (actual)
$280,000
January
$400,000
February
$600,000
March
$300,000
April
$200,000
c. Sales are 20% for cash and 80% on credit. All payments on credit sales are collected in the month following sale. The accounts receivable at December 31 are a result of December credit sales.
d. The company’s gross margin is 40% of sales. (In other words, cost of goods sold is 60% of sales.)
e. Monthly expenses are budgeted as follows: salaries and wages, $27,000 per month: advertising, $70,000 per month; shipping, 5% of sales; other expenses, 3% of sales. Depreciation, including depreciation on new assets acquired during the quarter, will be $42,000 for the quarter.
f. Each month’s ending inventory should equal 25% of the following month’s cost of goods sold.
g. One-half of a month’s inventory purchases is paid for in the month of purchase; the other half is paid in the following month.
h. During February, the company will purchase a new copy machine for $1,700 cash. During March, other equipment will be purchased for cash at a cost of $84,500.
i. During January, the company will declare and pay $45,000 in cash dividends.
j. Management wants to maintain a minimum cash balance of $30,000. The company has an agreement with a local bank that allows the company to borrow in increments of $1,000 at the beginning of each month. The interest rate on these loans is 1% per month and for simplicity we will assume that interest is not compounded. The company would, as far as it is able, repay the loan plus accumulated interest at the end of the quarter.
Required:

Using the data above, complete the following statements and schedules for the first quarter:

1. Schedule of expected cash collections:
January
February
March
Quarter
Cash sales

$ 80,000







Credit sales

224,000







Total cash collections

$304,000







2. a. Merchandise purchases budget:




January

February

March

Quarter

Budgeted cost of goods sold

$240,000*

$360,000





Add desired ending inventory

90,000f







Total needs

330,000







Less beginning inventory

60,000







Required purchases

$270,000







___________

*$400,000 sales X 60% cost ratio =$240,000.

†$360,000 X 25% = $90,000.

b. Schedule of expected cash disbursements for merchandise purchases:




January

February

March

Quarter

December purchases

$ 93,000





$ 93,000

January purchases

135,000

135,000



270,000

February purchases

—







March purchases

—







Total cash disbursements for purchases

$228,000







3. Schedule of expected cash disbursements for selling and administrative expenses:




January

February

March Quarter
Salaries and wages
$ 27,000
Advertising
70,000
Shipping
20,000
Other expenses
12,000
Total cash disbursements for
selling and administrative expenses
$129,000
4. Cash budget:
January
February
March Quarter
Cash balance, beginning
$ 48,000
Add cash collections
304,000
Total cash available
352,000
Less cash disbursements:
Purchases of i nventory
228,000
Selling and administrative
expenses
129,000
Purchases of equipment
_____
Cash dividends
45,000
Total cash disbursements
402,000
Excess (deficiency) of cash
Financing: Etc.
(50,000)
5. Prepare an absorption costing income statement for the quarter ending March 31 as shown in Schedule 9 in the chapter.
6. Prepare a balance sheet as of March 31.

You view tea and scones as perfect complements, and you prefer to consumer one cup of tea with one scone. Also, your indifference curves are plotted with tea on the vertical axis. If you presently have two cups of tea and one scone, what this the marginal rate of substitution (MRS) at this point

có 3 bi đỏ và 1 bi đen. tính xác xuất lấy phải bi đỏ

List three (3) distinctions between limited liability partnership and conventional partnership using statute and decided cases.

Sự gia tăng về giá cả một loại hàng hóa nào đó không chắc chắn là sự gia tăng của lạm phát.đúng hay sai?

The inventory turnover ratio: Multiple Choice Is used to analyze collectability. Is used to measure solvency. Reveals how many times a company sells its merchandise inventory during a period. Reveals how many days a company can sell inventory if no new merchandise is purchased. Calculation depends on the company's inventory valuation method.