Methane is the main component of natural gas. Using the given reaction enthalpy, calculate the heat energy produced by the combustion of one kilogram of methane.

Answer:

C.faste-moving lava flows and explosion of cinder

The question is incomplete, the complete question is;

As Danny was pouring cereal for his breakfast, he noticed that the cereal box says that the cereal contains 5 milligrams of iron per serving. Danny decided to perform an experiment to test this claim. He found that the cereal contains 4.6 milligrams of iron per serving. Based on Danny's measurement, the value reported on the label is ( CORRECT OR INCCORECT) because A: (IT IS DIFFERENT FROM THE VALUE DANNY MEASURED) B: (IT IS REORTED TO THE NEAREST MILLIGRAM) C: (IT USES THE SAME UNITS THAT DANNY USED).

Answer:

CORRECT because IT IS REORTED TO THE NEAREST MILLIGRAM

Explanation:

In mathematics, values may be rounded up or down as required. In the case of this measurement of cereals by Danny, it is customary to measure the amount of iron per serving to the nearest milligram.

As such, even though Danny found out that the actual amount of iron per serving in the cereal is 4.6 milligrams, the value reported on the cereal box is still correct because it was reported to the nearest milligram hence the value had to be rounded up.

Answer:

NICL2 are classified as an ionic substance

19. place moth balls in the closet and observe after several days.

20. whenever wax or a candle burns it turns from solid to liquid but again at room temperature it turns to solid

21. evaporation, condensation, precipitation

22. it produces new substances

23. vinegar Bubbles when baking soda is added

24. steam

Answer:

The temperature to the nearest 0.5°C is 98.5°C

Answer:

letter d

Explanation:

hope it's help you

MOUNTAINS

Mountains are large, tall, and elevated land areas on the earth's surface. They have steep, sloping sides and sharp or rounded ridges, and a high point, called a peak.

PLAINS

Plains are one of the major landforms on earth. They are areas of flat lands.

PLATEAUS

A plateau is a flat, elevated landform that rises above the surrounding area.

DESERTS

Regions of dry, arid lands.

DELTAS

A river delta is a landform created by deposition of sediment that is carried by a river as the flow leaves its mouth and enters slower-moving or stagnant water.

Answer:

C. the energy used to hold the nucleus together

Answer:

Location 2 will cost the least to the company to mine.

Explanation:

a) Data and Calculations:

Locations  Cost of land     Cost of       Cost of mining      Time taken to

                                        equipment   and reclamation    mine the area

1                 $100,000      $10,000         $5,000 per day        30 days

2                 $35,000       $6,000          $4,500 per day        45 days

3                 $30,000       $7,500          $3,500 per day       120 days

4                 $40,500       $8,000          $7,000 per day        65 days

Locations  Cost of land     Cost of       Cost of mining                      Total

                                        equipment   and reclamation                    Costs

1                 $100,000      $10,000         $150,000 ($5,000 * 30)  $260,000

2                 $35,000       $6,000         $202,500 ($4,500 * 45)   $243,500

3                 $30,000       $7,500         $420,000 ($3,500 * 120)  $457,500

4                 $40,500       $8,000         $445,000 ($7,000 * 65)   $503,500

The question is: If 40 g of a compound C6H10O5 are dissolved in 500 g of water, determine the boiling point of this solution. (Water: boiling temperature 100 ° C and Kb = 0.52 ° C / m).

Answer: The boiling point of given solution is [tex]100.256^{o}C[/tex].

Explanation:

Given: Mass of solute = 40 g

Mass of solvent = 500 g (1 g = 0.001 kg) = 0.5 kg

[tex]K_{b} = 0.52^{o}C/m[/tex]

Molality is the moles of solute present in kg of solvent.

Moles is the mass of substance divided by its molar mass. Hence, moles of [tex]C_{6}H_{10}O_{5}[/tex] (molar mass = 162.141 g/mol) is calculated as follows.

[tex]Moles = \frac{mass}{molar mass}\\= \frac{40 g}{162.141 g/mol}\\= 0.246 mol[/tex]

Now, molality of the solution is calculated as follows.

[tex]Molality = \frac{molesof solute}{mass(in kg)}\\= \frac{0.246}{0.5 kg}\\= 0.492 m[/tex]

The boiling point is calculated as follows.

[tex]\Delta T_{b} = K_{b}m[/tex]

where,

m = molality

Substitute the values into above formula as follows.

[tex]\Delta T_{b} = K_{b}m\\= 0.52^{o}C/m \times 0.492 m\\= 0.256^{o}C[/tex]

As the boiling point of water is 100 degree Celsius. So, the boiling point of solution is as follows.

[tex](100 + 0.256)^{o}C\\= 100.256^{o}C[/tex]

Thus, we can conclude that the boiling point of given solution is [tex]100.256^{o}C[/tex].

Answer:

The sharing of electrons between a water molecule that forms four hydrogen bonds with the other four water molecules:

Explanation:

The hydrogen bond is a weak electrostatic force of attraction that exists between a covalently bonded H-atom and a highly electronegative atom like N,O or F.

In the case of the water molecule,

the highly electronegative atom is Oxygen and the intermolecular hydrogen bond in water is as shown below:

Thus H-bond is a weak electrostatic attraction formed between H-atom and O-atom in water.

Answer:

241.28 g NaCl(s)

Explanation:

Given 1.25 x 10²⁴ molecules of Cl₂ = 1.25 x 10²⁴molecules Cl₂(g)/6.023 x 10²³ molecules/mole = 2.08 mole Cl₂(g)

2Na(s)    +      Cl₂(g)      =>   2NaCl(s)

excess        2.08mole          ? mole

∴moles NaCl(s) formed from 2.08 moles Cl₂(g) = 2(2.08 mole NaCl(s))

= 4.16 mole NaCl(g) = 4.16 mole NaCl(s) x 58 g NaCl(s)/mole NaCl(s) = 241.28 g NaCl(s)  

Answer:

This is a chemical symbol for Potassium Bromide

Answer:g

Explanation:

Answer:

it is option (d)

it has more mass than any of the other planets of the inner solar system

Answer:

[tex]12H2O + 2(SO3)2 -> 3(SO4)2[/tex]

Explanation:

see below. This was balanced using the the aggregate redox species method, or ARS for short.

The balanced half equation of the given reaction can be written as:

[tex]SO_3^{2-} + H_2O \longrightarrow SO_4^{2-} +2H^+ +2e^-[/tex]

A chemical equation can be defined as the expression of a reaction in terms of chemical symbols of the elements. A chemical equation of the reaction involves reactants and formed products.

The chemical equation of the reaction in which the number of atoms of the elements is the same on both sides of the chemical equation is a balanced chemical equation.

According to the law of conservation of mass, the total mass of the elements on the reactant side and product side should be the same in a balanced equation.

Given the equation is  SO₃²⁻  →  SO₄²⁻

To balance the oxygen on both sides add water:

H₂O + SO₃²⁻  →  SO₄²⁻

To balance the hydrogen on both sides add H⁺:

H₂O + SO₃²⁻  →  SO₄²⁻ + 2H⁺

To balance the charges, add electrons:

H₂O + SO₃²⁻  →  SO₄²⁻ + 2H⁺ + 2e⁻

Learn more about the balanced chemical equation, here:

brainly.com/question/15052184

#SPJ2

Answer: The molecular weight of the dibasic acid is 89.6 g/mol

Explanation:

Normality is defined as the amount of solute expressed in the number of gram equivalents present per liter of solution. The units of normality are eq/L. The formula used to calculate normality:

[tex]\text{Normality}=\frac{\text{Given mass of solute}\times 1000}{\text{Equivalent mass of solute}\times \text{Volume of solution (mL)}}[/tex]      ....(1)

We are given:

Normality of solution = [tex]\frac{1}{20}=0.05N[/tex]

Given mass of solute = 0.56 g

Volume of solution = 250 mL

Putting values in equation 1, we get:

[tex]0.05=\frac{0.56\times 1000}{\text{Equivalent mass of solute}\times 250}\\\\\text{Equivalent mass of solute}=\frac{0.56\times 1000}{0.05\times 250}=44.8g/eq[/tex]

Equivalent weight of an acid is calculated by using the equation:

[tex]\text{Equivalent weight}=\frac{\text{Molar mass}}{\text{Basicity}}[/tex]   .....(2)

Equivalent weight of acid = 44.8 g/eq

Basicity of an acid = 2 eq/mol

Putting values in equation 2, we get:

[tex]44.8g/eq=\frac{\text{Molar mass}}{2eq/mol}\\\\\text{Molar mass}=(44.8g/eq\times 2eq/mol)=89.6g/mol[/tex]

Hence, the molecular weight of the dibasic acid is 89.6 g/mol

Answer:

B

Explanation:

because protons have a +1 charge and electrons have a -1 charge, so if an atom is neutral it must have the same amount of protons and neutrons

Answer:

You should repent God is coming back soon

I don't know

I don't know

I don't know

I don't know

The required temperature of the gas sample is -64.96 °C.

Ideal gas equation gives idea about the behavior of gas at different condition & represented as:

PV = nRT.

From the above equation it is clear that relation between temperature and pressure for this question is:

P₁/T₁ = P₂/T₂, where

P₁ & T₁ are the initial pressure and temperature.

P₂ & T₂ are the final pressure and temperature.

On putting values, we get

T₂ = (145)(-25) / (55.8) = -64.96 °C

Hence required temperature of the sample is -64.96 °C.

To know more about ideal gas equation, visit the below link:
https://brainly.com/question/1056445

#SPJ2

Answer:

Ca + Pb(NO3)2 → Pb + Ca(NO3)2

Explanation:

This is an oxidation-reduction (redox) reaction:

PbII + 2 e- → Pb0

(reduction)

Ca0 - 2 e- → CaII

(oxidation)

Pb(NO3)2 is an oxidizing agent, Ca is a reducing agent.

Answer:

C

Explanation:

like charges repel each others so if they have the same charge they will move away from each other

Metal containers are not used for storing acid because most of the time acid reacts with almost every metal and produces salts or oxides which alters the acid characteristics making it useless....