Answer: m = nM= 242.8 g
Explanation: amount of MgCl2 is same as n(Mg)
M(MgCl2) = 95.21 g/mol
95.21 g/mol is the mass in grams of MgCl[tex]_2[/tex] are produced by 2.55 mol Mg in the reaction Mg + 2HCl ⟶ MgCl[tex]_2[/tex] + H[tex]_2[/tex].
What is mass?A body's mass is an inherent quality. Prior to the discoveries of the concept of atom as well as particle physics, it was widely considered to be tied to the amount of matter inside a physical body. It was discovered that, despite having the same quantity of matter in theory, different atoms and elementary particles have varied masses.
There are various conceptions of mass in contemporary physics that are theoretically different but physically equivalent. The resistance of the body to accelerate (change of velocity) in the presence of a net force can be measured experimentally as mass. The gravitational pull an object has on other bodies is also influenced by its mass.
m = n×M= 242.8 g
M(MgCl[tex]_2[/tex]) = 95.21 g/mol
Therefore, 95.21 g/mol is the mass in grams of MgCl[tex]_2[/tex] are produced by 2.55 mol Mg in the reaction Mg + 2HCl ⟶ MgCl[tex]_2[/tex] + H[tex]_2[/tex].
To know more about mass, here:
https://brainly.com/question/28704035
#SPJ2
how is salt obtained or manufactrured
Answer:
There are three methods used to produce salt: solar, evaporation and rock mining.
Explanation:
two types of subatomic particles in the nucleas of an atom
Explanation:
protons and neutrons.....
...
Answer:
The subatomic particles are Protons and Neutrons.
When cobalt(II) chloride is allowed to react with sodium hydroxide, the resulting
products are cobalt(II) hydroxide and sodium chloride. Determine the mass of
cobalt(II) chloride required to completely react with 114g of sodium hydroxide.
Answer:
Reaction CoCl2 + 2 NaOH -> Co(OH)2 + 2 NaOH
You need to count number of moles of NaOH
Amount of mole is n = m/M = 114 g / 39.998 g/mol = 28,5 mol (about)
Amount of CoCl2 is half from that
Calculate molar mass of CoCl2 and multiply it by 28,5 mol
Explanation:
What is the mass of water released by the heating? Show your work or explain your reasoning.
Answer:
Dividing the mass of the water lost by the original mass of hydrate used is equal to the fraction of water in the compound. Multiplying this fraction by 100 gives the percent water in the hydrate.
Explanation:
The amount of water throughout the compound has been determined by dividing the mass of water wasted mostly by original quantity of hydrate used. The above fraction can be multiplied by 100 to get the hydrate's water content in percentages.
What is mass ?The proportion of matter that makes up an object is quantified by its mass. The kilogram, or kg, would be the fundamental SI unit of mass.
What is hydrate?Any substance that contains water through the form of H2O molecules is referred to as a hydrate. This water content by weight can vary, but it is typically fixed. The most well-known hydrates seem to be crystalline solids which decompose once the attached water is removed.
Therefore , The amount of water throughout the compound has been determined by dividing the mass of water wasted mostly by original quantity of hydrate used. The above fraction can be multiplied by 100 to get the hydrate's water content in percentages.
To know more about mass and hydrate.
https://brainly.com/question/11202174
#SPJ3
What is metal ? Where does it coke from ?
Answer:
Most pure metals, like aluminium, silver and copper, come from the Earth's crust. They are found in ores – solid materials called minerals, usually occurring in rock, from which the pure metal has to be extracted. The properties of pure metals can be improved by mixing them with other metals to make alloys.a metal is an element that readily forms positive ions (cations) and has metallic bonds
coke is a strong stimulant made from coca leaves
PLEASE HELP ME ASAP!!!!!! YOU GET 10 POINTS!!!!!!
For reaction below, describe how its equilibrium could be shifted in the indicated direction.
1. H2(g)+C12(g)<---------->2HC1(g)+thermal energy: shift to the left
2.C(s) +O2(g)<---------->CO2+thermal energy: shift to the right
Answer:
Here is the ANSWER KEY, it may also has other of the questions you don't know :)
Explanation:
https://sciencewithhorne.weebly.com/uploads/5/7/3/5/57358947/unit_11_hw_key.pdf
please help and show work
What is the volume of 5.7 moles of Hydrogen gas?
what is the function of a prism
Answer:
Prisms are sometimes used for the internal reflection at the surfaces rather than for dispersion. If light inside the prism hits one of the surfaces at a sufficiently steep angle, total internal reflection occurs and all of the light is reflected.
Explanation:
Prism, in optics, piece of glass or other transparent material cut with precise angles and plane faces, useful for analyzing and reflecting light. An ordinary triangular prism can separate white light into its constituent colours, called a spectrum.
helpppppppppppppp!!!!!!!!!!!!!how did chlorine atom attain saturation in potassium chloride and oxygen dichloride
1. Which of the following is not an example of a form of carbon?
O fullerenes
O graphite
salt
diamond
1. 2.00 L of gas is at 740 mm Hg. What is its volume at standard
pressure?
0.16
Explanation:
when you divided 1.2.00 with 740 you get this number.
Which of the nine substances are made of four elements?
Answer:
Oxygen mucury carbon dioxide and platinum
Explanation:
Using standard formation enthalpies, calculate the standard reaction enthalpy for this reaction. 6CO2(g) + 6H2O(l)C6H12O6 + 6O2(g) ANSWER: kJ/mol
Answer:
2802.5 KJ/mol
Explanation:
Calculate standard enthalpy of the Reaction :
6CO2(g) + 6H2O(l)C6H12O6 + 6O2(g)
using standard formation enthalpies . hence the standard enthalpy of the reaction = 2802.5 KJ/mol
attached below is the detailed solution
HELP ITS DUE IN AN HOUR!!
What is a lattice position?
Explain
Explanation:
Crystallography. an arrangement in space of isolated points (lattice points ) in a regular pattern, showing the positions of atoms, molecules, or ions in the structure of a crystal.
If an atom experiences sufficient thermal activation, it can move to a neighboring lattice position.4 If the vibration frequency of the atom is v and the atom has Z nearest neighbors, the total number of jump attempts is vZ. However, only a small fraction of the attempts will be successful, with a probability depending on the ratio between the necessary activation energy for a single jump QD and the thermal activation kBT. The effective jump frequency ΓD is then
(5.6)
With each successful jump, the atom travels one atomic distance λ and the total traveling distance in unit time is thus ΓDλ. Substituting the jump frequency ΓD into the expression for the root mean square displacement of a random walker [equation (5.5)] and using the spatial coordinate r leads to
how many molecules are in 45.0 g of water
Using the diagram, which two planes would intersect in HG?
Answer please .. :)
Answer:
I think D
Explanation:
it has both H and G in the planes.
Which series reveals the source of energy for coal?
coal chemicals sun
coal plants chemicals
coal animals sun
coal plants sun
Answer:
coal chemicals sun
Explanation:
How is a scientific law different from other laws in society?
A. A scientific law serves to protect people, property, and nature from
harm.
OB. A scientific law describes what always happens under specific
conditions in nature.
C. A scientific law is a rule about how to treat and punish people.
D. A scientific law is what scientists have decided should be forced
to happen in nature.
Answer:
B. A scientific law describes what always happens under specific
conditions in nature.
Explanation:
Scientific law is something that has been proven over and over and therefore is always correct under conditions in nature.
Answer:
B. A scientific law describes what always happens under specific
conditions in nature.
Explanation:
Scientific law is based on observation and experiments to support a claim. It usually describes nature.
precautions of a radioactive decay lab ?
Answer:
Don't touch radioactive waste with bare hands
Don't eat the radioactive thing
Wear protective eyewear
Wear lab coat/gloves
Explanation:
https://ehs.princeton.edu/laboratory-research/radiation-safety/radioactive-materials/handling-radioactive-materials-safely
Princeton article
PLEASE HELP I WILL MARK YOU BRAINLIEST !!If you react 4.25 moles of FeCl2, how many moles of Cl2 did you also react?
ILL GIVE 12 POINTS TOO PLEASE IM BEGGING FOR HELPPPPP
Help for extra points & brainlest !
Answer: i think is true
Explanation:
True. Cells have jobs in your body as they have functions to do.
2KCIO3 -> 2KCI+ 302
How many moles of oxygen are produced by
the decomposition of 6.0 moles of potassium
chlorate, KCIO3?
Answer:
9 moles
Explanation:
The balanced chemical equation for this decomposition reaction is as follows:
2KCIO3 → 2KCI+ 302
Based on this equation, 2 moles of potassium chlorate (KCIO3) decomposes to form 3 moles of oxygen gas (O2).
Hence, 6 moles of pottasium chlorate will decompose to produce;
6 × 3 ÷ 2
= 18 ÷ 2
= 9 moles of O2.
Describe the relationship between the potential difference across the resistor and
the current through the resistor.
Ohm's Law states that for a linear circuit the current flowing through it is proportional to the potential difference across it so the greater the potential difference across any two points the bigger will be the current flowing through it.
(I'm happy)
What is the molarity of a solution when 2.75 g of NaCl is dissolved in 1100 mL of solution?
0.043 M
0.25 M
0.43 M
4.27 M
Answer:
Explanation:
0.25 M
The molarity of a solution will be 4.27M .
What is molarity?Molarity (M), often known as molar concentration, is the concentration of a solution expressed in moles of solute per liter of solution.
What is solution?Solution can be considered as a mixture of more than one component. It may be homogeneous solution as well as heterogeneous solution.
Gram to mole conversion:
[tex]=\;2.75\;g.\;\frac{1\;mol}{58.44g} \\=\;0.0470 \;mol[/tex]
Molarity of the solution can be calculated by using the following formula:
It is calculated that, moles of solute = 0.0470 mol, volume of the solution = 1100 mL.
Now, put the value of given data in molarity formula:
[tex]Molarity=\frac{Moles\;of\;the\;solute}{Volume \;of\; the\; solution} \\=\frac{0.0470\;mol}{1100 \;mL} \\=\;4.27\;mol/mL\\=\;4.27\; M[/tex]
Therefore, the molarity of a solution will be 4.27M.
To know more about molarity and solution click here.
https://brainly.com/question/2817451.
#SPJ2
do i have to know the chemical and physical properties of alloys? only chemistry students answer this.
Answer:
yes you do so you know how strong it is how maluble it's is so it can be customised to it's specific use
Answer:
alloy's properties are usually different from those of its component elements. Alloy constituents are usually measured by mass. Unlike pure metals, most alloys do not have a single melting point; rather, they have a melting range in which the substance is a mixture of solid and liquid.
physical properties of alloys:-Alloy steels have a wide range of special properties, such as hardness, toughness, corrosion resistance, magnetizability, and ductility. Nonferrous alloys, mainly copper–nickel, bronze, and aluminum alloys, are much used in coinage.
chemical properties of alloys:-Pure metals are useful but their applications are often limited to each individual metal's properties. Alloys allow metal mixtures that have increased resistance to oxidation, increased strength, conductivity, and melting point; Essentially any property can be manipulated by adjusting alloy concentrations.
dnt learn all thr properties.
these are the main properties..u can learn thse only. hope it will help u
CaC2(s) + 2H2O(l) --> Ca(OH)2(aq) + C2H2(g) In the reaction above, 0.5487 grams of calcium carbide are completely consumed to produce acetylene gas, C2H2. What volume (in mL) will this gas occupy if it is collected at 43 degrees Celsius and 0.926 atm pressure
Answer:
239.7mL
Explanation:
Using the general gas equation;
PV = nRT
Where;
P = pressure (atm)
V = volume (L)
n = number of moles (mol)
R = gas constant (0.0821 Latm/molK)
T = temperature (K)
The balanced chemical equation in this question is as follows:
CaC2(s) + 2H2O(l) --> Ca(OH)2(aq) + C2H2(g)
From the equation, 1 mole of CaC2 produces 1 mole of ethylene gas, C2H2.
Using mole = mass/molar mass
Molar mass of CaC2 = 40 + 12(2)
= 40 + 24
= 64g/mol
mole = 0.5487/64
mole = 0.00857mol of CaC2
Hence, 0.00857mol of CaC2 produced 0.00857mol of C2H2
Based on the information provided, n = 0.00857mol, T = 43°C = 43 + 273 = 316K, p = 0.926 atm
PV = nRT
V = nRT/P
V = 0.00857 × 0.0821 × 316/0.926
V = 0.222/0.926
V = 0.2397L
In mL, volume = 0.2397 × 1000
= 239.7mL
5g of NaOH was dissolved in 1000cm3. 25cm3 of this solution neutralized 28.3cm3 of solution containing 7.2gdm-3 of impure H2SO4. Calculate I. The molarity of H2SO4 II. The concentration of the pure acid on gdm-3 III. % impurity of the acid
Explanation:
The balanced equation for the reaction between NaOH and H2SO4 is given as;
2NaOH + H2SO4 → Na2SO4 + 2H2O
2 mol of NaOH reacts with 1 mol of H2SO4
5g of NaOH was dissolved in 1000cm3.
Mass = 5 g
Molar mass = 40 g/mol
Volume = 1000 cm3 = 1 L
Number of moles = Mass / Molar mass
Number of moles = 5 / 40 = 0.125 mol
Molarity = Number of moles / Volume
Molarity = 0.125 / 1 = 0.125 M
25cm3 of this solution neutralized 28.3cm3 of solution containing 7.2gdm-3 of impure H2SO4.
CaVa / CbVb = Na / Nb ; where a = acid and b = base
Va = 28.3cm3
Vb = 25cm3
Ca = ?
Cb = 0.125 M
Na = 1
Nb = 2
I. The molarity of H2SO4
Solving for Ca;
Ca = CbVb * Na / (Va * Nb)
Cb = (0.125 * 25 * 1 ) / ( 28.3 * 2)
Cb = 0.0552 M
II. The concentration of the pure acid on gdm-3
Molarity = Mass conc / Molar mass
Mass Conc = Molarity * Molar mass
Mass Conc = 0.0552 * 98.079
Mass Conc = 5.41 g/dm3
III. % impurity of the acid
Percentage Impurity = Mass of pure / Mass of Impure * 100
Percentage Impurity = 5..41 / 7.2 * 100
Percentage Impurity = 75.14%
classify the following elements under metals, non metals and metalloids, boron, zinc Mercury, silicon, oxygen, nitrogen, sodium
Answer:
Zinc mercury transition metal
Silicon boron metalloid
Oxygen nitrogen non metal
Sodium alkali metal
Explanation:
an element has atomic number of 17 state the elements group and period number
Answer:
The element is in group 7, the halogens. The element is in the third period or row of the table.
Explanation:
Chlorine is element number 17.
Metallic bonding occurs between atoms of
1.)sulfur
2.)copper
3.)fluorine
4.)carbon
Answer:
copper
Explanation:
metallic bonds occur among the metal atoms where iconic bonds join metal and nonmetals metallic bonding joins a bolt of metal atoms a sheet of aluminum foil and a copper wire are both place where you can see metallic bonding in action the Sea of electrons that is free to flow about the crystal of positive metal ions
Metallic bonding occurs between metal atoms. Among the given copper is example of metal in which copper atoms are strongly held by metallic bonds.
What are metals?Metals are electropositive elements. Metals contains a pool of mobile electrons among the sea of positive ions. Metals exhibit some peculiar features such as conductivity, hardness, malleability, ductility, luster etc.
Metals atoms form well orders crystalline structure in which particles are held together by strong metallic bonds. In periodic table, the first two groups and all the d-block elements are metals.
Copper is a transition metal in d-block. Copper is a very important metal in our lives and in industries since it is used in constructions, electronics, house hold items etc., because of its hardness and conductivity. Hence, option 2 is correct.
Find more on copper;
https://brainly.com/question/2289251
#SPJ2
