MnO₄- chemical name for ALEKS

B is the answer to your question.

C2H4 is not capable of hydrogen bonding because the H's are attached to the Carbon, and the charge is 0.

Although HCl cannot hydrogen bond, that aspect does not hinder it's ability to dissolve. Because HCl is polar and so is water, the positive side of H2O will be attracted to the negative side of HCl, thus "tearing" the molecule apart. (Like dissolves like - polar dissolves polar)

Based on the Solubility rule, KBr is soluble because it contains a group 1 metal.

To convert from mass concentration to molar concentration we use the formula;

Mass concentration = molar concentration * molar mass

Molar concentration of Na2SO4 = 0.700 M

Molar mass of Na2SO4  = 2(23) + 32 + 4(16) = 142 gmol-1

Hence;

Mass concentration = 0.700 M * 142 gmol-1

Mass concentration = 99.4 g/mol

To know more about concentration, see

https://brainly.com/question/23437000

Answer:

Solution temperature.

Explanation:

Hello there!

In this case, considering this question about chemical kinetics, it will be possible for us to analyze two perspectives:

1. Molecular: here, we infer that the solution temperature will provide more energy to the molecules in order to undergo more effective crashes which will make more products and therefore, increase the rate constant.

2. Mathematical: by means of the Arrhenius equation, it will be possible to tell that the increase in the temperature of the system, the negative of the exponent present in such equation will increase and therefore turn the rate constant bigger.

In such way, we infer the answer is solution temperature.

Regards!

Answer:

dissolution is the process

Fats may be either saturated or unsaturated. A saturated fat is a fat that consists of triglycerides whose carbon chains consist entirely of carbon-carbon single bonds. ... An unsaturated fat is a fat that consists of triglycerides whose carbon chains contain one or more carbon-carbon double bonds.

Explanation:

to find the number of moles for tetracycline you use the formula,

number of moles=mass/molar mass

the mass is given in the question which is 71.9g and the molar mass is 444.43(you find I by adding the number of atoms for each element in the compound,12×22+1×24+14×2+16×8)

n=71.9g/444.43

=0.16g/mol

I hope this helps

Answer:

yes it is

Explanation:

because there are some acid which really harm skin.

Answer:

16

Explanation:

Because the sum of all electron in that compound should be 41 and as it has one electron extra ,total no. of electrons are 42 .

So if we add 26 +16 we get 42

Hence it's correct answer

Answer:

d. 60.8 L

Explanation:

Step 1: Given data

Step 2: Calculate the work (W) done by the system

We will use the following expression.

ΔU = Q + W

W = ΔU - Q

W = -108.3 J - 53.1 J = -161.4 J

Step 3: Convert W to atm.L

We will use the conversion factor 1 atm.L = 101.325 J.

-161.4 J ×  1 atm.L/101.325 J = -1.593 atm.L

Step 4: Calculate the initial volume

First, we will use the following expression.

W = - P × ΔV

ΔV = - W / P

ΔV = - 1.593 atm.L / 0.677 atm = 2.35 L

The initial volume is:

V2 = V1 + ΔV

V1 = V2 - ΔV

V1 = 63.2 L - 2.35 L = 60.8 L

Answer:

It's D.  On the surface of the solid.

Explanation:

If the reactant is a solid, the surface area of the solid will impact how fast the reaction goes. This is because the two types of molecule can only bump into each other at the liquid solid interface, i.e. on the surface of the solid. So the larger the surface area of the solid, the faster the reaction will be.

Answer:

2 Methyl pent 2 ene

An isotope is an element with the same atomic number but different mass number due to differences in number of neutrons.

electron configuration is 2,8,6.

Belongs to group 6 and period group 3.

It forms an ion by accepting 2 electrons

Answer:

Tapeworms and roundworms both belong to the same phylum however, their families are different from one another.

Tapeworms are flat, segmented intestinal parasites of the cat and dog and humans sometimes. They are present in the intestines of pets and depend on them, therefore, are parasites. These parasites look like tape which gives it its name.

Roundworms can also infect humans and the most common cases are among children. When not treated immediately, they can cause severe damage to a human host and can even cause blindness. Tapeworms are white in color with a long, segmented body.

Answer:

yes it is corrwect iyt is absolitle correct

Explanation:

Answer: D. Scientific investigation aims to design and implement an experiment to learn new information, whereas technological development aims to design a product to solve a problem.

Explanation:

The best option for dissolving PbBr₂ is option (2)

2) Add a solution of NaBr

The reason for choosing the above option is as follows;

Lead (II) bromide is an inorganic powdery substance that has a solubility in water of 0.973 g/100 mL at 20°C. It is insoluble in alcohol but is soluble in alkali, ammonia, NaBr, and KBr.

PbBr₂ is slightly soluble in ammonia, and it reacts with NaOH to produce Pb(OH)₂ and NaBr.

Taking the solubility product of PbBr₂ as [tex]K_{sp}[/tex] = 6.60 × 10⁻⁶, in a solution of 0.5 M NaBr, we have;

PbBr₂ → Pb⁺ + 2Br⁻

[tex]K_{sp}[/tex] = [Pb]·[2Br]²

Therefore, we get;

6.60 × 10⁻⁶ = [x]·[0.5]²

Where;

x = The number of moles of lead, Pb, in per liter of solution

∴ x = (6.60 × 10⁻⁶)/[(0.5 )²] = 2.64 × 10⁻⁵.

The molar solubility of PbBr₂ per liter of NaBr, x = 2.64 × 10⁻⁵ mol/L

PbBr₂ is more soluble in NaBr.

Given that ammonium ion NH₄Br  in water gives similar products to ammonia, NH₃, it is expected to be more suitable to dissolve PbBr₂ in NaBr.

Therefore, the best solution for dissolving PbBr₂(s) is NaBr, the correct option is option (2) add a solution of NaBr.

Learn more about solubility product here;

https://brainly.com/question/14300821

Answer:

1.12 mol/L.

Explanation:

From the question given above, the following data were obtained:

Mole of LiCl = 3.75 moles

Volume = 3.36 L

Molarity =?

Molarity is simply defined as the mole of solute per unit litre of the solution. Mathematically, it is expressed as:

Molarity = mole / Volume

With the above formula, we can obtain the molarity of the solution as follow:

Mole of LiCl = 3.75 moles

Volume = 3.36 L

Molarity =?

Molarity = mole /Volume

Molarity = 3.75 / 3.36

Molarity = 1.12 mol/L

Thus, the molarity of the solution is 1.12 mol/L

Answer:

D. 2:5

Explanation:

It has 5 valency electrons

[tex].[/tex]

In the given question, the electronic configuration of nitrogen is 2,5. The correct answer is option D.

The electronic configuration of an atom describes the arrangement of its electrons in different energy levels or orbitals.

Nitrogen has an atomic number of 7, which means it has 7 electrons.

Therefore, the electronic configuration of nitrogen is 2,5, which means it has 2 electrons in its first energy level and 5 electrons in its second energy level. Option D is the correct answer.

Learn more about Electron Configuration here: https://brainly.com/question/14283892

#SPJ4

Answer: The layers are ordered by density, with the least dense layer on top, and the densest layer on the bottom.

Explanation:

Plato

Answer:

Hence the correct option is an option (b) Sr4, Cl,Br−,Na+.

Explanation:    

Bromine and chlorine belong to an equivalent group. As we go down the group the dimensions increases which too there's a charge on the bromine atom. therefore the size of the Br- is going to be larger in comparison to the chlorine atom.

Sr atom is within the second group, and also it's below the above-mentioned atoms.so Sr is going to be the larger one among all the atoms.

Sodium and chlorine belong to an equivalent period .size decrease from left to right. but due to the charge on sodium its size decreases and there's an opportunity that Na+ size could be adequate for Cl.      

Here we finally assume that two atoms are of an equivalent size (Na+ and Cl) which are less in size compared to the opposite two(Sr and Br-) during which one is greater (Sr)and the opposite is smaller(Br-).

Answer:

B. The atom

Explanation:

Cells are the most basic unit of structure and the smallest unit of matter is the atom.

Answer:

B. The atom

Explanation:

yeee it was right

Answer:

[ICl] = 0.0420 M

[I₂]  = [Cl₂] = 0.0140 M

Explanation:

Step 1: Calculate the initial concentration of ICl

[ICl] = 0.350 mol / 5.00 L = 0.0700 M

Step 2: Make an ICE chart

        2 ICl(g) ⇄ I₂(g) + Cl₂(g)

I        0.0700     0         0

C        -2x          +x        +x

E    0.0700-2x      x          x

The concentration equilibrium constant (Kc) is:

Kc = 0.110 = [I₂] [Cl₂] / [ICl]² = x² / (0.0700-2x)² = (x/0.0700-2x)²

0.332 = x/0.0700-2x

x = 0.0140

The concentrations at equilbrium are:

[ICl] = 0.0700-2x = 0.0700-0.0280 = 0.0420 M

[I₂]  = [Cl₂] = x = 0.0140 M

Solution :

A Grignard compound or a Grignard reagent is defined as a chemical compound having a generic formula of  R−Mg−X.

Here, X = halogen

          R = organic group

The Grignard reagents are obtained by treating the organic halide  with a magnesium metal.

In the context, when  trans-1-bromo-1-butene is reacted with magnesium, a Grignard reagent is produced.

When this Grignard reagent is reacted with an ethanol, the following product is obtained in the attachment :

Answer:

which class are you please mention

Spontaneous generation theory is that living organisms can arise by non living things.

This theory follows the concept of abiogenesis where there is non living parent for a living child.

The appearance of maggots from rotten meat is the idea of abiogenesis, this creates a living organism with a dead parent.

The rotten piece of meat is a non living object but still maggots were formed from this.

Therefore the correct answer is B.

Answer:

a

Explanation:

Answer:

CaCl2 has ionic bond because here calcium gives its electron to the chlorine atom and becomes positivetly charged ion.

Answer:

In styrene, there is a phenyl group which is electron-withdrawing. So the electronic density in the double bonds increases, hence easy to associate as monomers. While in methoxystyrene, there is a carbonyl group which is not electron deficient. so no easy association with monomers.

Explanation:

[tex]{ \sf{styrene \: is \: phenylethene \: }} \\ { \sf{its \: polymer \: is \: polystyrene}}[/tex]

Answer:

See explanation and image attached

Explanation:

Aromatic compounds undergo electrophilic aromatic substitution reactions in which the aromatic ring is maintained.

Substituted benzenes may be more or less reactive towards electrophilic aromatic substitution than benzene depending on the nature of the substituent present in the ring.

Substituents that activate the ring towards electrophilic substitution such as -OCH3 are ortho-para directing.

The major products of the bromination of anisole are p-bromoanisole and o-bromoanisole. The resonance structures leading to these products are shown in the image attached.

Answer:

Calcular la molaridad de una solución que se preparó disolviendo 14 g de KOH en suficiente  

agua para obtener 250 mL de solución. (masa molar del KOH = 56 g/mol).

Resolución: de acuerdo a la definición de “molaridad” debemos calcular primero, el número de mol de soluto (KOH) que  

se han disuelto en el volumen dado, es decir, “se transforma g de soluto a mol de soluto” por medio de la masa molar,  

así:

56 g de KOH 14 g de KOH

----------------- = ------------------- X = 0,25 mol de KOH

1 mol X

Ahora, de acuerdo con la definición de molaridad, el número de mol debe estar contenido en 1000 mL (o 1 L) de  

solución, que es el volumen estándar para esta unidad de concentración, lo que se determina con el siguiente planteamiento:

0,25 mol X

----------------------- = ------------------------- X = 1 mol de KOH

250 mL de solución 1000 mL de solución

Explanation:

The measurement of body fluid compartments can be achieved by the dilution of chemical compounds that only circulate and disperse in the region of selected areas in the body. The dilution process is dependent on how the concentration is defined.

Given that:

∴

Concentration C  = 0.5 mg/100

Concentration C = 0.005 mg/ml

Since the mass amount of the chemical compound(i.e. insulin) and the concentration is known.

The volume of the body fluid compartment can be calculated as:

[tex]\mathbf{volume = \dfrac{\text{mass of the marker }}{concentration }}[/tex]

[tex]Volume = \dfrac{80 \ mg}{0.005 \ mg/ml}[/tex]

Volume = 16000 ml

Thus, it is known that insulin is generally utilized for the measurement of the extracellular fluid volume and serves as a cell impermeant marker.

As a result;

The volume of the extracellular fluid compartment is 16000 ml.

However, the tritium-labeled water is a good marker for the entire body fluid compartment due to the fact that:

Given that:

plasma activity of tritium = 20 cpm/ml

i.e.

In 1 ml of plasma, 20 cpm of tritium is present.

As such, in 960,000 counts per min (cpm) of tritium-labeled water, the volume of the whole body compartment is:

[tex]\mathbf{= \dfrac{960000}{20} ml \plasma}[/tex]

= 48000 ml of plasma

Therefore, we can conclude that the volumes of the body compartment that can be determined are:

Learn more about body fluid compartments here:

https://brainly.com/question/6791522?referrer=searchResults