Slope of I-V graph is Resistance.
Its S.I. unit is Ohm.
The symbol of ohm is Ω.
The U.S. has plans to build a 30-meter telescope, while the Europeans are thinking about a 39-meter telescope. What technological innovation allows astronomers to be thinking about telescopes with that large an aperture
Answer:
The mirror in these telescopes will be constructed from many smaller mirrors which will work together.
Explanation:
A telescope is defined as an optical instrument that is used to observe or view the distant objects. A telescope is made up of curved lenses or mirrors or by combining both.
In the context, both the US and the Europeans are planning to make a telescope which is 30 m and 39 m respectively. This could be possible as the mirrors that are used to make these telescope will be made from a many smaller mirrors that will work together as a single large mirror having a very large aperture.
One type of atomic particle that is found in the nucleus does not contribute to
an element's atomic number. What are two characteristics of this type of
atomic particle?
Answer:
1) They are electrically neutral
2) They have slightly more weight than protons
Explanation:
The given atomic particle found in the nucleus has the following characteristics;
The location of the particle = The nucleus
The (numbers of the) particle does not contribute to (change) the atomic number of the element
The particles found within the nucleus of an atom are; Neutrons and protons
The particle within the nucleus that determines the atomic number = The number of protons
Therefore, the particle referenced in the question is the neutrons
The two characteristics of the neutron are;
1) The neutrons are neutral, electrically
2) Neutrons have slightly more weight than protons
3) Neutrons are magnetic
4) Neutrons are very small
5) Neutrons consist of three quarks; One 'Up', and two 'Down' quarks
Therefore, two characteristics of the particle are;
1) They are electrically neutral and 2) They are slightly heavier than protons.
What is potential energy? What are some of its examples.
Answer:
the energy stored in an object because of its specific state or position is called its potential energyexamples:-a compressed springWater that is behind a dam.A car that is parked at the top of a hill. a moving car.Etc....
Explanation:
❣️jess bragoli❣️#keep learning!!
Explanation:
POTENTIAL energy is the energy that is stored in an object due to its position relative to some zero position.
A student attaches a rope to a box and pulls the box up a ramp as shown below. The ramp has a rough surface. When
drawing the free body diagram for the box, the friction force should be directed:
O up and to the right
down and to the left
up and to the left
to the left
NEXT QUESTION
ASK FOR HELP
TURN ITIN
a ship using an echo sounding device receives an echo from the bottom 0.8 seconds after the sound is emitted. if the velocity of sound in water is 1500m as what is the depth of water?
Answer: depth= 1875m
Explanation: divide t by 2 because its echo it will go and come back thats why we divide it with 2
Then apply formula Depth(d)=velocity (v)/time (t)
Putting values we get ,
d=1500/0.4
d=1875m
If mass is the amount of MATTER present in the
object, will it be different on Earth and the moon?
No
Yes
Answer:
Yes it would be different on Earth and the moon
Answer:
yes
Explanation:
d. 'g' vanishes at centre of
6) A prism of 6° is made of material of refractive index What is the
deviation caused by it
d. 40
c.120
a. 60
b.8°
7) An object is placed 1cm from lens having magnification 5. Then its foc
length is
a. 0.8 cm b. 1.2 cm c. -1.2 cm d. -0.8cm
Answer:
a. 0.8 cm
Explanation:
The distance of the object from the lens, u = 1 cm
The magnification of the lens, m = 5
The focus of a lens formula is given as follows;
[tex]f = \dfrac{1}{\dfrac{1}{v} + \dfrac{1}{v} }[/tex]
The magnification of the lens, m = -v/u
Where;
v = The distance of the image from the lens
Therefore, we have;
v = m × u
∴ v = 5 × 1 cm = 5 cm (on the other side of the lens)
From which we get;
[tex]f = \dfrac{1}{\dfrac{1}{1} + \dfrac{1}{5} } = \dfrac{5}{6} \approx 0.8[/tex]
The focal length ≈ 0.8 cm
Potential Energy (kJ)
Reaction Progress →
A) Does this graph represent an endothermic or exothermic reaction? Explain your answer. (2 points) HELP PLEASE ITS URGENT !!
Answer:
Endothermic reaction
Explanation:
(a) Endothermic reaction: These are reactions that absorb heat from the surrounding during a chemical reaction. The enthalpy change for endothermic reaction is always positive, and the energy level of the product is higher than that of the reactant
(b) Exothermic reaction: These are reactions that release heat to the surrounding during chemical reaction. The enthalpy change for exothermic reaction is always positive, and the energy level of the product is lower than that of the reactant.
From the diagram in the question,
Since the energy level of the product is higher than that of the reactant then the reaction is an endothermic reaction and as such, ΔH is positive
In an electromagnet, what produces the magnetic field?
A. Electric charges moving through a conducting wire.
B. Electric charges moving through the metal core.
C. The metal core within a coil of wire.
D. The magnetic field of a permanent magnet.
Infrared telescopes are usually placed on high-flying airplanes or on satellites in space __________
Answer:
In order to improve visibility
Explanation:
Infrared telescopes are made using infrared cameras that contain infrared detectors which are solid-state and are maintained at very cold (cryogenic) temperatures
Infrared radiation is absorbed by water vapor which is present in the Earth's atmosphere, leading to the limitation of the use of infra red telescopes at high altitudes such as mountains, high flying planes or satellites
1.8kg 42J 9.8 how high is the shelf
Answer:
2.38m
Explanation:
Use potential energy
PE= mgh
42= 1.8*9.8*h
solve for h
to get h= 2.38 m
The Sun's energy comes from which nuclear reaction?
Answer:
the sun energy comes from nuclea fution
Examine the equation.
-2(-x + 9) = 2(x - 9)
2x - 18 = 2x - 18
This equatior has
Answer:
same value because both sides are equal
Explanation:
equal value
Two parallel conducting plates are separated by 12.0 cm, and one of them is taken to be at zero volts. (a) What is the magnitude of the electric field strength between them, if the potential 5.6 cm from the zero volt plate is 450 V
Answer:
-8.036 kV/m
Explanation:
The electric field E = -ΔV/Δx where ΔV = change in electric potential = V - V' where V = electric potential at x = 5.6 cm = 450 V and V' = electric potential at x = 0 cm, = 0 V . So, ΔV = V - V' = 450 V - 0 V = 450 V.
Δx = distance between the 0 V plate and the 450 V point = 5.6 cm = 0.056 m
So, E = -ΔV/Δx
Substituting the values of the variables into the equation, we have
E = -ΔV/Δx
E = -450 V/0.056 m
E = -8035.7 V/m
E = -8.0357 kV/m
E ≅ -8.036 kV/m
Since the electric field between two parallel conducting plates is constant, the electric field between the plates is E = -8.036 kV/m
Although centuries ago astronomers thought that a supernova was a new star appearing for the first time in the heavens, today we know that it is:
Answer:
a violently exploding star that releases light energy whose intensity can illuminate a whole galaxy.
Explanation:
A Supernova is a violent star explosion that causes the release of light that expands so many times and that is capable of illuminating a galaxy. It marks the end of a star and also results in the release of gamma rays, radio waves, x-rays, and heavy elements. Unlike a nova, a supernova destroys the star where it occurs.
A supernova is classified into Type I and Type II. Type I supernova produces three times more brightness than Type II and it occurs as a white dwarf absorbs hot gas from an associate star. The Type II supernova marks the end of the star. It lacks the ability to produce nuclear energy at its core and results in the collapse of the star.
Question 26 of 30
Which of the following is a type of mechanical wave?
Check all that apply.
A. Longitudinal
B. Surface
O C. Transverse
D. Electromagnetic
Answer:
Mechanical waves are A. Longitudinal and C. Transverse.
Explanation:
I hope this helps you.^_^
A steer must eat at least 100 pounds of grain to gain less than 10 pounds of muscle tissue. This illustrates Group of answer choices the second law of thermodynamics. that some energy is destroyed in every energy conversion. the first law of thermodynamics. that energy transformations are typically 100% efficient.
Answer:
the second law of thermodynamics. that some energy is destroyed in every energy conversion.
Explanation:
According to the second law of thermodynamics, energy conversion is never 100% efficient. Some energy is always lost as it is being converted from one form to the other.
The fact that a steer must eat at least 100 pounds of grain to gain less than 10 pounds of muscle tissue shows that not all the energy taken up from the grain is channelled towards building the muscle tissue. Some energy from the grains are lost on the way according to the second law of thermodynamics.
what is gamma rays brust
Explanation:
A gamma - Ray Brust (GRB) is often the brightest source in the sky, often brighter than everything else combined.Answer:
A solenoid is a type of electromagnet, the purpose of which is to generate a controlled magnetic field through a coil wound into a tightly packed helix. The coil can be arranged to produce a uniform magnetic field in a volume of space when an electric current is passed through it.
why is the value of g more in terai than in the mountain
The solution and answer are well written in the Pic above.
What is the magnitude of the electric field at a point 0.0055 m from a 0.0025
C charge?
kg
Use E = and k=9.00 x 10 N.m²/C2.
O A. 7.4 x 1011 N
O B. 2.0 x 1010 N
O C. 4.1 x 10°N
OD. 7.9 x 1012 N
Answer:
Explanation:
The equation for the electric field is
[tex]E=\frac{kQ}{r^2}[/tex] so filling in:
[tex]E=\frac{9.00*10^9(.0025)}{(.0055)^2}[/tex] which in the end gives you
E = 7.4 × 10¹¹, choice A
When the E string of a guitar (frequency 330 Hz) is plucked, the sound intensity decreases by a factor of 2 after 4 s. Determine
Answer:
[tex]Q=50.3[/tex]
Explanation:
From the question we are told that:
Frequency [tex]F=330Hz[/tex]
Sound intensity drop [tex]I_d=2[/tex]
Time [tex]T=4s[/tex]
Therefore
Sound intensity Ratio
[tex]\frac{I}{I_x}=\frac{1}{2}[/tex]
Generally the equation for Sound intensity is mathematically given by
[tex]\frac{I}{I_x}=e^{-4\ \=t}[/tex]
[tex]\frac{1}{2}=e^{-4\ \=t}[/tex]
[tex]\=t =5.8s[/tex]
Generally the equation for Quality Factor is mathematically given by
[tex]Q=2 \pi\frac{E}{\triangle E}[/tex]
[tex]Q=2 \pi\frac{E}{\frac{E}{2*4}}[/tex]
[tex]Q=50.3[/tex]
From class, weight is a measurement of the force of
acting on an object.
Friction
Normal
Gravity
Tension
Applied
Answer:
the answer is well known as gravity
An amoeba has 1.00 x 1016 protons and a net charge of 0.300 pC. Assuming there are 1.88 x 106 fewer electrons than protons, If you paired them up, what fraction of the protons would have no electrons
Answer:
The fraction of the protons would have no electrons [tex]=1.88\times 10^{-10}[/tex]
Explanation:
We are given that
Amoeba has total number of protons=[tex]1.00\times 10^{16}[/tex]
Net charge, Q=0.300pC
Electrons are fewer than protons=[tex]1.88\times 10^6[/tex]
We have to find the fraction of protons would have no electrons.
The fraction of the protons would have no electrons
=[tex]\frac{Fewer\;electrons}{Total\;protons}[/tex]
The fraction of the protons would have no electrons
=[tex]\frac{1.88\times 10^{6}}{1.00\times 10^{16}}[/tex]
[tex]=1.88\times 10^{-10}[/tex]
Hence, the fraction of the protons would have no electrons [tex]=1.88\times 10^{-10}[/tex]
How much heat is required to evaporate 0.15 kg of lead at 1750°C, the boiling point for lead? The heat of vaporization for lead is Lv = 871 × 103 J/kg.
Answer:
Heat required = mass× latent heat Q = 0.15 × 871 ×
The heat required to evaporate 0.15 kg of lead at 1750°C will be 130,650 J.
What is heat?The movement of energy from a hot to a cold item is characterized as heat. Heat energy flows from a hot material to a cold one.
This occurs because faster-vibrating molecules transmit their energy to slower-vibrating ones.
The given data in the problem is;
m is the mass of lead = 0.15 kg
T is the temperature = 1750°C,
The latent heat of vaporization for lead is, [tex]\rm L_V[/tex] = 871 × 10³ J/kg.
The heat is found as;
[tex]\rm Q= m \times L_V \\\\ \rm Q= 0.15 \times 871 \times 10^3 \\\\ Q=130,650 \ J[/tex]
Hence the heat required to evaporate 0.15 kg of lead at 1750°C will be 130,650 J.
To learn more about the heat refer to the link;
brainly.com/question/1429452
A child who is swimming toward shore at 0.78 m/s sees shark and picks up his speed
to 1.89 m/s. He covers 17.5 m until he lands on shore. What was his acceleration?
Answer:
0.085m/s²
Explanation:
Use v²=v0²+2a(d)
solve for a
v²-v0²/2d=a
Plug in givens
1.89²-0.78²/2*17.5=a
Plug into calculator
a=0.085m/s²
In both the camera and the __________, light enters a narrow opening and is projected onto a photosensitive surface. Group of answer choices
Answer: The HUMAN EYE
Explanation:
The human eye is made up of different parts which ranges from controlling the amount of light that enters the eye to the focusing of the image that is formed. The camera is a device which is both mechanically and electronically operated which shares a number of similarities with the eye.
In the human eye, the IRIS helps to regulate the amount of rays passing through the pupil to the lens by either contracting or dilating in light or dark environment respectively. While in the camera, the DIAPHRAGM controls the amount of light entering the camera.
The PUPIL serves as the passage for light into the eye while in the camera, the APERTURE does the same.
The photosensitive surface in the eye is the YELLOW SPOT while in the camera, the photosensitive surface is the PHOTOGRAPHIC FILM.
A bus starts to move with the speed of 15m/s. Calculate the time taken by the bus to cover distance of 15000m.
Answer:
1000
Explanation:
the formula of time taken= d/s. t=15000÷15 t=1000. I hope it helps
formula of distance is S=Vt
so, 15000=15t
15000 divide by 15=t
1000=t or t=1000
At a 1500 m race, Ken ran at an average speed of 200 m/min. How long did it take for Ken to finish the race? (meter = m, minute = min) min
[tex]speed = \frac{distance}{time} \\ = > \frac{200m}{min} = \frac{1500m}{t} \\ = > \frac{200m}{60s} = \frac{1500m}{t} \\ = > \frac{10m}{3s} = \frac{1500m}{t} \\ = > t = 1500m \times \frac{3s}{10m} \\ = > t = 150 \times 3s \\ = > t = 450s \: [/tex]
This is the answer.
Hope it helps!!
a current of 6.0A runs through a circuit for 2.5 minutes how much change was delivered to this circuit
Answer:
900C
Explanation:
Change 2.5 mins to secs by multiplying by 60 which is 150secs
hope this helps please like and mark as brainliest
Why would researchers not be allowed to recreate the Little Albert experiment today?
Answer:
Explanation:
En la historia de la ciencia se han dado auténticas barbaridades. Pruebas con animales que hoy no perdonaría nadie, o investigaciones de conducta con personas como la de la cárcel de Stanford, que se han saldado como una especie de pasado incómodo sobre los límites de la experimentación. Sin embargo, pocos se pueden acercar por su carácter perturbador al denominado experimento de Little Albert o Pequeño Albert: El salvaje intento por probar con un bebé que las fobias pueden ser condicionadas y aprendidas. Y lo que es peor, conseguirlo.
Esta idea surgió de la mente de John Broadus Watson, reconocido padre de la rama conductista de la psicología, que desde 1913 había comenzado a probar en animales sus tesis. Estas bebían directamente del los estudios de Iván Pavlov, fisiólogo ruso que ganó el Nobel en 1904 por sus estudios sobre el sistema digestivo, pero que también sentó precedentes sobre la psicología.
link por si te interesa:
https://hipertextual.com/2017/10/pequeno-albert
