Answer:
Air resistance/Drag (this is the proper term for air resistance) or gravity or friction
It depends on the direction and if you throw it across a surface or if you throw it straight upwards.
I hope this helps!!
Answer:
Newton's first law: An object at rest remains at rest, or if in motion, remains in motion at a constant velocity unless acted on by a net external force.
Explanation:
The reason that worlds like the Earth are differentiated is that Group of answer choices the heat of the Sun vaporized much of their solid material early on the heaviest chunks that hit early on were able to bore through solid rock to the center the continuing impacts on a growing protoplanet eventually melted the entire body large amounts of hydrogen and helium collect around such planets a little later in their history planetesimals with different types of composition hit at different times, with the heaviest ones hitting first
Answer:
A differentiated body is a body that has been heated to the point where it is are further from the sun larger have no solid surface and have many more moons Smaller chunks of material vaporize completely as they pass through its atmosphere
Explanation:
Hope it helps..A body is said to be differentiated when it has been heated to the extent where it is bigger, farther from the sun, has no hard surface, and has a lot more moons. Smaller pieces of the materials entirely evaporate as they pass through their environment.
What is Planet?An enormous, spherical celestial object known as a planet is neither a star nor a remain. The nebular theory, which states that an interstellar cloud collapses out of a nebula to form a young protostar that orbits the sun by a protoplanetary disk, is now the best argument for planet formation. By slowly accumulating material under the influence of gravity, or accretion, planets form in this disk.
The terrestrial planets Mercury, Venus, Earth, and Mars, as well as the planetary nebulae Jupiter, Saturn, Uranus, and Neptune, total at least eight planets in the Solar System. These planets all rotate around axes that seem to be inclined relative to their corresponding polar axes.
To know more about Planet:
https://brainly.com/question/14581221
#SPJ2
An experiment is carried out to measure the extension of a rubber band for different loads.
Complete question is;
An experiment is carried out to measure the extension of a rubber band for different loads.
The results are shown in the image attached.
What figure is missing from the table?
Answer:
17.3 cm
Explanation:
The image attached showed values for load, extension and initial length.
Now, the first length there is 15.2 cm and as such it's corresponding extension is 0 because it has no preceding measured length.
The second measured length is 16.2 cm. Since it's initial measured length is 15.2 cm, then the extension has a formula; final length - initial length.
This gives: 16.2 - 15.2 = 1 cm
This corresponds to what is given in the table.
For the next measured length, it is blank but we are given the extension to be 2.1 cm. Now, since the initial measured length is 15.2 cm.
Thus;
2.1 cm = Final length - 15.2 cm
Final length = 15.2 + 2.1
Final length = 17.3 cm
A 78-kg skydiver has a speed of 62 m/s , what is the kinetic energy?
Answer:
149,916J
Explanation:
Pneumonic device: Kevin is half-mad and very square
this translates to: KE=(1/2)mv^2 !!
KE=(1/2)(78)(62^2)
KE=(39)(3844)
KE=149,916 Joules
Answer:
it's 149916
Explanation:
Formula = 1/2 x m x v^2
so if you put into your calculator 1/2 x 78 x 62^2
you get 149916
PLZZZ HELP ME ASAP FOR BRAINLIEST AND 20 POINTS
I am desperate and these are my last points.
:'(
Answer:
gamma rays
Explanation:
Alfred is studying a substance that is made out of only one element. This means that
Answer: A pure substance is something that occurs in nature. An element is made up of one type of atom only and cannot be split further. A compound has the combined properties of the elements from which it is made. Atoms show the macro properties of an element.
A wave has a wavelength of 0.98 m and travels 2.0x10^2 m in 0.78 s. What is the frequency of the wave?
Answer:
261.64 hz
Explanation:
speed = distance/ time
s= 200/0.78= 256.41 ms^-1
by using v= (f) x ( lambda)
256.41/ 0.98 = f = 261.64 hz
The frequency of the wave with the given wavelength, traveling the given distance at the given time is 261.6 Hertz.
What is the frequency of the wave?
Wavelength is the distance over which the shapes of waves are repeated.
From the wavelength, frequency and speed relation,
λ = v ÷ f
Where λ is wavelength, v is velocity/speed and f is frequency.
Given that;
Wavelength λ = 0.98mDistance traveled d = 2.0×10²mTime elapsed t = 0.78sFrequency = ?First, we determine the speed.
Speed = Distance / time
Speed = 2.0×10²m / 0.78s
Speed = 256.4m/s
Now, we find the frequency.
λ = v ÷ f
f = v ÷ λ
f = 256.4m/s ÷ 0.98m
f = 261.6s⁻¹
f = 261.6Hz
Therefore the frequency of the wave with the given wavelength traveling the given distance at the given time is 261.6 Hertz.
Learn more about Speed, Frequency and Wavelength here: brainly.com/question/27120701
#SPJ2
Complete the following sentence.
An animal’s genetic and observable traits are called the
_and_
dont have options
Answer:
Dominant and recessive
Explanation:
This is like 6th-grade stuff man
How do you increase mechanical energy
Answer:
If an object moves in the opposite direction of a conservative net force, the potential energy will increase; and if the speed (not the velocity) of the object changes, the kinetic energy of the object also changes.
Explanation:
Hope i explained that clearly... :)
What is the correct reason for blinking / flickering of stars? Explain it.
A) The blasts in the stars.
B) Absorption of star light by the atmosphere.
C) Motion of the stars.
D) Changing refractive index of gases in the atmosphere.
plz suggest me a answer which can give me 3 marks
Answer:
d. changing refractive index of gases in the atmosphere
Explanation:
light from a star passes through the atmosphere to reach our eyes. however, the layers of gases in the atmosphere are in constant motion, so the light gets bent and appears to be flickering.
i hope this helps! :D
Which is a characteristic of the part of the atom marked "A"?Which is a characteristic of the part of the atom marked "A"?Which is a characteristic of the part of the atom marked "A"?Which is a characteristic of the part of the atom marked "A"?Which is a characteristic of the part of the atom marked "A"?
Answer:
its c
Explanation:
just did it
Answer:
c
Explanation:
How is blue colour made?
Answer:
In terms of the light spectrum, blue is a primary color, which means that it is one of the base colors that exist in the universe and it cannot be created by combining different colors together. The primary pigment colors are cyan, magenta, and yellow. Cyan absorbs red, yellow absorbs blue, and magenta absorbs green.
Explanation:
Hope this helped Mark BRAINLEST!!!
(FOR SCIENCE)fill in the blank with the words ok the top!!!!!
PLEASE HELP THIS IS IMPORTANT!
the more mass an object has the more damage it can cause. true or false?
Yes it's true
compare a falling feather vs a falling rock
Answer:
It's true. Mass is directly proportional to force so more mass means more force applied which causes more damage.
A 0.035 bullet strikes a 5kg wooden block that is stationary and gets stuck inside the block. The block and bullet move together at 8.6 m/s. What is the initial velocity of the bullet?
Answer:
1240 m/s
Explanation:
[Do you mean 0.035 kg bullet?]
Since the momentum of the system is conserved,
Let u m/s be the initial velocity of the bullet
0.035u = 8.6(5+0.035)
u ~= 1237.1714 m/s
u = 1240 m/s (3 sig. fig.)
There is concern that extra additives in detergents can
have negative health and environmental impacts. Is
it wise to use detergents containing these additives?
Answer:
Look below.
Explanation:
If additives are having negative effects on health and the environment, it would be wise to not use detergents containing these additives. These additives could threaten living things such as humans and animals.
There is concern that extra additives in detergents can have negative health and environmental impacts, then it would be very unwise to use detergents containing these additives
What is pollution?It can be defined as the origination of the contaminant substance that poisonous or harmful to our natural environment.
There are several types of pollution that exist in our nature depending on the state and composition of the contaminant, for example, water pollution can exist due to the eutrophication process.
It would be quite unwise to use surfactants that include these additional ingredients since there is fear that they might have a harmful influence on your well-being and the environment.
To learn more about pollution from here, refer to the link;
brainly.com/question/23857736
#SPJ2
What type of energy is energy in the form of motion.
Answer:
the answer is kinetic energy
En un recipiente con mercurio (13.6 gr/cm3) se sumerge completamente un cuerpo de 900 gramos de masa. AL medir su peso aparente este marca 2.94 newton en el dinamómetro. Cual es la densidad del cuerpo (kg/m3)
Answer:
ρ = 20.4 kg / m³
Explanation:
For this exercise we use Archimedes' principle, the thrust on a submerged body is equal to the weight of the released liquid
B = ρ g V_liquid (1)
let's write the equilibrium equation
F -W + B = 0
B = W -F
let's calculate
B = 0.900 9.8 - 2.94
B = 5.88 N
From equation 1
V_{liquid} = [tex]\frac{B}{\rho_{Hg} g}[/tex]
V_{liquid} = [tex]\frac{5.88}{13.6 \ 10^3 \ 9.8}[/tex]
V_{liquid} = 4.41176 10⁻⁵ m³
in this case it is indicated that the body is completely submerged
V_body = V_liquid = V
the definition of density is
ρ = m / V
ρ = [tex]\frac{0.900 \ 10^{-3}}{ 4.41176 \ 10^{-5} }[/tex]
ρ = 2.04 10¹ kg / m³
ρ = 20.4 kg / m³
Some people today claim the Earth is flat. Produce an argument to prove that the
Earth is not flat.
Answer:
i mean i think it is. we have no real pics of the earth they are all fake. And the moon landing was fake. the usa flag was blowing but there is no wind in space . its all fake
Explanation:
PLEASE HELP!!!!!!! A student is trying to demonstrate static electricity, so they rub two identical balloons with a neutral rabbit fur to give them a charge. How
do these three objects now behave when brought near to each other?
A. They all attract each other.
B. The balloons repel each other but attract the rabbit fur.
O C. They all repel each other.
O D. The balloons attract each other but repel the rabbit fur.
I uploaded the answer to a file hosting. Here's link:
tinyurl.com/wpazsebu
How do mountains affect the climate of a region?
Will most likely cause the formation of a Mountain
A. Divergent boundary
B. Convergent boundary
C. Transform boundary
Answer:
Convergent boundaries. When two plates collide and one is pushed over the other, forming a mountain.
on
Draw
3. The weight of a body varies from location to location. Where would the weight of the
body be least
On the moon
At sea level on earth
On top of Mount Everest
In space
4. We meet many different types of force every day. Some of these are shown in the list
below. However, one of these is NOT a force. Which one is it?
A
Speed
B
Push
C
Pull
Friction
Answer:
it's C a pull friction
Explanation:
because it's all said in the explained
HELP PLEASE!!!!!!!!!!!!!!!
This problem has been solved! See the answer A 21.5 kg person climbs up a uniform 85 N ladder. The upper end of the ladder rests on a frictionless wall. The bottom of the ladder rests on a floor with a rough surface. The angle between the horizontal and the ladder is 59 ◦. The person can climb 78 % up the ladder before the base of the ladder slips on the floor. What is the coefficient of static friction µs between the base of the ladder and the floor? The acceleration of gravity is 9.8m/s 2 .
Answer:
μ = 0.179
Explanation:
For this exercise we use the rotational equilibrium condition, where we set a reference system at the top of the ladder where it is in contact with the parent, we will assume the counterclockwise rotations as positive
∑ τ = 0
W_stairs x/2 + W_man x’+ fr y - N x = 0
fr y = -W_stairs x/2 - W_man x’ + N x
let's use trigonometry for distances
* the man up the ladder 78%
l ’= 0.78 L
cos 59 = x ’/ l’
x’= 0.78 L cos 59
* the horizontal distance
cos 59 = x / L
x = L cos 59
* vertical distance
sin 59 = Y / L
y = L sin 59
we substitute
fr L sin 59 = -W_stairs Lcos59 / 2 - W_man 0.78 L cos59 + N L cos59
fr sin 59 = - ½ W_stairs cos 59 - 0.78 W_man cos 59 + N cos 59
fr = ctan 59 (N - ½ W_stairs - 0.78 W_man) (1)
Let's write the translational equilibrium equations
Y axis
N -W_stairs - W_man = 0
N = W_stairs + W_man
N = 85 + 21.5 9.8
N = 295.7 N
we substitute in 1
fr = ctg 59 (295.7 - ½ 85 - 0.78 21.5 9.8)
fr = 0.6 (295.7 - 42.5 - 164.346)
fr = 52.89 N
the expression for the friction force is
fr = μ N
μ = fr / N
μ = 52.89 / 295.7
μ = 0.179
At which latitude would tropical rain forests be most likely?
(giving brainliest)
-10 degrees North
-30 degrees South
-60 degrees North
-90 degrees South
Conoces algún proceso o producto de la vida cotidiana en el que se utilice agua oxigenada (H2O2) concentrada?
Answer:
wound disinfectant, to kill fungus, teeth whitener
Explanation:
Hydrogen peroxide or hydrogen peroxide is a polar compound which is why it is a strong oxidant.
Therefore it can be used as a wound disinfectant, to kill fungus, teeth whitener
In industry it is used for toothpastes, fabric bleach and in high concentrations 90% as rocket fuel
Define one solar day
Answer:
the time between successive meridian transits of the sum at a particular place
A scooter acquires a speed of 36km/ h in 5s just after the start. Calculate the acceleration of the scooter
Answer:
We need to convert seconds to hours:
5s= (5/60)min= 0.08min=(0.08/60)h=0.001h
a=v/t=36/0.001=36.000km/h^2
Pls, help me quick! :( I need a lot of help.
Answer:d
Explanation:
because the brighter the stars look the bigger they look
if a car exerts a area of 3m and a force of 9N what is the pressure exerted by car
Answer:
P = 3 Pa
Explanation:
Given that,
Force exerted by the car, F = 9 N
The area of the car, A = 3 m²
We need to find the pressure exerted by the car. We know that pressure is equal to the force per unit area such that,
[tex]P=\dfrac{F}{A}\\\\P=\dfrac{9\ N}{3\ m^2}\\\\P=3\ Pa[/tex]
So, the pressure exerted by the car is equal to 3 Pa.
