Nitrogen and hydrogen react to form ammonia, like this:N2(g)+3H2(g)→2NH3(g)Use this chemical equation to answer the questions below.Suppose 135, mmol of N₂ and 405, mmol of H₂ are added to an empty flask, How much N₂ will be in the flask at equilibrium? a. Noneb. Some, but less than 135, mmol.c. 135,mmold. More than 135, mmol.Suppose 235, mmol of NH₃ are added to an empty flask, How much N₂ will be in the flask at equilibrium? a. Noneb. Some, but less than 118, mmol.c. 118,mmold. More than 118, mmol.

Answer:

The answer is "It takes 1,70 mol of ethanol".

Explanation:

To make acetic acid, we must first write the balanced reaction that occurs of ethanol with oxygen

The response is balanced:

[tex]CH_3CH_2OH+O_2\to CH_3COOH+H_2O[/tex]

1 mol of ethanol creates 1 mol of According the equilibrium Ethanol moles, therefore, required 1.70 mol of water = 1.70 mol

Answer:

When this equation is solved, the two values of the unknown are 0.0643 and -0.082

Explanation:

Given

[tex]1.77 * 10^{-2} = \frac{x^2}{0.298 - x}[/tex] --- the actual equation

Required

The values of x

We have:

[tex]1.77 * 10^{-2} = \frac{x^2}{0.298 - x}[/tex]

Cross Multiply

[tex]1.77 * 10^{-2} * (0.298 - x)= x^2[/tex]

Multiply both sides by 100

[tex]1.77 * (0.298 - x)= 100x^2[/tex]

Open bracket

[tex]0.52746 - 1.77x= 100x^2[/tex]

Rewrite as:

[tex]100x^2 + 1.77x - 0.52746 =0[/tex]

Using quadratic formula:

[tex]x = \frac{-b \± \sqrt{b^2 - 4ac}}{2a}[/tex]

Where:

[tex]a = 100; b = 1.77; c = -0.52746[/tex]

So, we have:

[tex]x = \frac{-1.77 \± \sqrt{1.77^2 - 4*100*- 0.52746 }}{2*100}[/tex]

[tex]x = \frac{-1.77 \± \sqrt{214.1169}}{2*100}[/tex]

[tex]x = \frac{-1.77 \± 14.63}{200}[/tex]

Split

[tex]x = \frac{-1.77 + 14.63}{200}\ or\ x = \frac{-1.77 - 14.63}{200}[/tex]

[tex]x = \frac{12.86}{200}\ or\ x = \frac{-16.40}{200}[/tex]

[tex]x = 0.0643\ or\ x = -0.082[/tex]

Answer:

Explanation:

From the given information:

Camphor may be reduced as readily in the presence of sodium borohydride(NaHB4). The resulting compound which is stereoselective requires 1 mole of sodium borohydride (NaHB4) to reduce 1 mole of camphor in this reaction. The reaction is shown below.

Through the reduction process of camphor, the reducing agent can reach the carbonyl face with a one-carbon linkage. The product stereoisomer is known as borneol.

If the molecular weight of camphor = 152.24 g/mol

and it mass = 200 mg

The its no of moles = 200 mg/ 152.24 g/mol

= 1.3137 mmol

Now the amount of the required mmol for NaBH4 to be consumed in the reaction = 5.2 × 1.3137 mmol

= 6.831 mmol

since the molar mass of NaBH4 = 37.83 g/mol

Then, using the same formula:

No of moles = mass/molar mass

mass = No of moles × molar mass

mass = 6.831 mmol × 37.83 g/mol

mass of NaBH4 used = 258.42 mg  

Solution :

a). The separation of 4-methylbenzoic acid from 1,4-dimethoxybenzene will work but it will result in lower recovery.

In the reaction of acid-base to form a sodium 4 - methoxy benzoate, that is soluble in the water, 4-methoxy benzoic acid reacts with the sodium bicarbonate to give sodium 4-methoxybenzoate as well as carbonic acid.

b). The pKa for the 4-methoxybenzoic acid is [tex]4.46[/tex], and that of carbonic acid is [tex]6.37[/tex]

c). The Keq for the reaction is [tex]10(6.37 - 4.46) = 101.91[/tex]

Therefore, the equilibrium lies to the right  and also the reaction favors the products and the separation works.

But the recovery will be low when compared to the extraction with Sodium hydroxide as the strong base will drive the equilibrium further to the right position, thus neutralizing all the acids virtually. And the weak base will partially neutralize the acid.

Answer:

Arrange the following compounds in order of acidity (highest to lowest): H2O, CH3COOH , HCl

A. CH3COOH > HCl > H2O

B. H2O > CH3COOH > HCl

C. HCl > H2O > CH3COOH

D. HCl > CH3COOH > H2O

Explanation:

The given substances are acetic acid, hydrochloric acid, and water.

Since HCl is a strong acid and it undergoes complete ionization.

CH3COOH acetic acid is a weak acid and it undergoes partial dissociation in water.

Pure water is a neutral substance.

Hence, the order of acidity is shown below:

HCl > CH3COOH > H2O.

Among the given options, option D is the correct answer.

Answer:

joib

Explanation:

Explanation:

So, first you will want to write the balanced chemical equation for this reaction.

Butane = [tex]C_4H_{10}[/tex]

[tex]2C_4H_{10}+13O_2=>10H_2O+8CO_2[/tex]

^ This ends up being your balanced chemical equation. Now, you can do the math!

[tex]1.57gC_4H_{10}*\frac{1molC_4H_{10}}{58.12gC_4H_{10}}*\frac{10molH_2O}{2molC_4H_{10}}*\frac{18gH_2O}{1molH_2O}[/tex]

After plugging this into a calculator, your final mass of water should be:

2.43gH2O

Answer:

a

Explanation:

documentary is best researcher!.

There are 3.43 × [tex]10^{56}[/tex] atom will be present in 5.70 x [tex]10^{32}[/tex] mol of Rn.

The basic number of matter that may be broken even without producing electrically charged molecules is the atom.

Calculation of atom:

It is given that number of mol = 5.70 x [tex]10^{32}[/tex] mol.

Then, the number of atom = 5.70 x [tex]10^{32}[/tex] mol × 6.02 × [tex]10^{23}[/tex].= 3.43 × [tex]10^{56}[/tex] atom.

Therefore, there are 3.43 × [tex]10^{56}[/tex] atom will be present in 5.70 x [tex]10^{32}[/tex] mol of Rn.

To know more about atom.

https://brainly.com/question/1566330

#SPJ3

Answer:

36.55kJ/mol

Explanation:

The heat of solution is the change in heat when the KNO3 dissolves in water:

KNO3(aq) → K+(aq) + NO3-(aq)

As the temperature decreases, the reaction is endothermic and the molar heat of solution is positive.

To solve the molar heat we need to find the moles of KNO3 dissolved and the change in heat as follows:

Moles KNO3 -Molar mass: 101.1032g/mol-

10.6g * (1mol/101.1032g) = 0.1048 moles KNO3

Change in heat:

q = m*S*ΔT

Where q is heat in J,

m is the mass of the solution: 10.6g + 251.0g = 261.6g

S is specififc heat of solution: 4.184J/g°C -Assuming is the same than pure water-

And ΔT is change in temperature: 25°C - 21.5°C = 3.5°C

q = 261.6g*4.184J/g°C*3.5°C

q = 3830.87J

Molar heat of solution:

3830.87J/0.1048 moles KNO3 =

36554J/mol =

Answer:

"Esters are widespread in nature and are widely used in industry. In nature, fats are in general triesters derived from glycerol and fatty acids. Esters are responsible for the aroma of many fruits, including apples, durians, pears, bananas, pineapples, and strawberries."

Explanation:

Explanation:

This is a decomposition reaction. Firstly, you will want to write the chemical equation out and balance it.

[tex]2Hg_2O->4Hg+O_2[/tex] (The -> is supposed to be an arrow, sorry!)

We see that there's only 1mol of Oxygen made in the products, we can do some simple math to solve for the amount of grams of Oxygen produced according to the amount of the reactant (Hg2O).

[tex]32.2gHg_2O*\frac{1molHg_2O}{417.18gHg_2O}*\frac{1molO_2}{2molHg_2O}*\frac{32gO_2}{1molO_2}[/tex]

I want to break this down, just in case:

The 417.18gHg2O is the molecular mass of the molecule (so I doubled Hg and added 16 to it to get this number).

As we can see in the chemical equation, 1mol Hg2O produces 2mol O because Oxygen is a diatomic molecule (so there will always be two of it when it's by itself).

And finally, in 1mol O2 there are 32g of O2.

** When you do math like this, always make sure that all of your units cancel out except for the units you're looking for. For example, here we're looking for the grams of Oxygen, so after everything else cancels out, we should only have grams O2.

So, 1.23gO2 should be your answer.

Answer:

Oxygen, O₂ is the limiting reactant

Explanation:

We'll begin by writing the balanced equation for the reaction. This is given below:

2H₂ + O₂ —> 2H₂O

Next, we shall determine the masses of H₂ and O₂ that reacted from the balanced equation. This can be obtained as follow:

Molar mass of H₂ = 2 × 1 = 2 g/mol

Mass of H₂ from the balanced equation = 2 × 2 = 4 g

Molar mass of O₂ = 16 × 2 = 32 g/mol

Mass of O₂O from the balanced equation = 1 × 32 = 32 g

SUMMARY:

From the balanced equation above,

4 g of H₂ reacted with 32 g of O₂.

Finally, we shall determine the limiting reactant. This can be obtained as follow:

From the balanced equation above,

4 g of H₂ reacted with 32 g of O₂.

Therefore, 10 g of H₂ will react with

= (10 × 32)/4 = 80 g of O₂.

From the calculations made above, we can see that a higher mass (i.e 80 g) of O₂ than what was given (i.e 5 g) is required to react completely with 10 g of H₂. Therefore, O₂ is the limiting reactant.

Oxygen has been the limiting reactant in the reaction.

A limiting reactant can be defined as the reactant in the reaction in which the product concentration has been dependent.

The balanced equation for the formation of water has been:

[tex]\rm 2\;H_2\;+\;O_2\;\rightarrow\;2\;H_2O[/tex]

For the formation of reaction to form 2 moles of water, 2 moles of hydrogen reacts with 1 mole of oxygen.

The moles can be calculated as:

Moles = [tex]\rm \dfrac{weight}{molecular\;weight}[/tex]

The moles of Hydrogen in 10 g [tex]\rm H_2[/tex]:

Moles = [tex]\rm \dfrac{10}{2}[/tex]

Moles of hydrogen = 5 mol.

Moles of Oxygen in 5 grams Oxygen:

Moles = [tex]\rm \dfrac{5}{32}[/tex]

Moles of oxygen = 0.156 mol.

For the reaction with 2 moles of Hydrogen 1 mole of Oxygen has been required.

For reacting with 5 mol of Hydrogen, moles of oxygen required are:

Moles of oxygen = [tex]\rm \dfrac{1}{2}\;\times\;5[/tex]

Moles of oxygen required = 2.5 moles.

The available oxygen = 0.156 moles.

Since the moles of oxygen available is lesser than required, the formation of the product has been dependent on the concentration of the oxygen.

Thus, oxygen has been the limiting reactant in the reaction.

For more information about the limiting reactant, refer to the link:

https://brainly.com/question/14225536

Answer:

A

Explanation:

because solid stick together like magnetic and can feel every vibration

Answer:D

Explanation: on the surface of a solid

Answer:

First, the number of ammonium sulfide molecules should be calculated:

N = NA × n,

where NA - the Avogadro number, n - number of moles.

N (ammonium sulfide) = 6.022 × 1023 × 8.5 mol = 51.187 × 1023.

The moelcular formula of ammonium sulfide is (NH4)2S. It means that each molecule contains 8 hydrogen atoms.

As a result, 8.5 mol of (NH4)2S contain:

51.187 × 1023 × 8 = 41 × 1024 hydrogen atoms.

Answer: 41 × 1024 hydrogen atoms

Answer:

a. Na+ is pH neutral

b. Ni2+ = weak acid

c. NH4+ = Weak acid

Explanation:

To know the nature of the cation we need to find the nature of its conjugate base.

If the conjugate base of the ion is a strong base, the ion is neutral.

If the conjugate base is a weak base, the ion is a weak acid:

a. Conjugate base Na+ = NaOH

Sodium hydroxide is a strong base:

Na+ is pH neutral

b. Conjugate base Ni²⁺: Ni(OH)2 is a weak base because is not completely soluble in water. That means:

Ni2+ = weak acid

c. Conjugate base NH4+: NH4OH. Weak base:

NH4+ = Weak acid

Answer:

0.1 L

Explanation:

From the question given above, the following data were obtained:

Concentration of stock solution (C₁) = 1.25 M

Volume of diluted solution (V₂) = 0.5 L

Concentration of diluted solution (C₂) = 0.25 M

Volume of stock solution needed solution (V₁) =?

The volume of the stock solution needed can be obtained as follow:

C₁V₁ = C₂V₂

1.25 × V₁ = 0.25 × 0.5

1.25 × V₁ = 0.125

Divide both side by 1.25

V₁ = 0.125 / 1.25

V₁ = 0.1 L

Therefore, the volume of the stock solution needed is 0.1 L

Answer:

a. minus 10

Explanation:

An element in group 13 = Boron ,valence electrons = 3 , therefore, valence electrons in group 13 = group no. -10

An element in group 18 = Neon, valence electrons = 8 , therefore, valence electrons in group 18 = group no. - 10

For groups 13 through 18, the number of valence electrons in an atom is equal to the group number minus 10. Therefore, option (A) is correct.

Valence electrons in an atom can be described as the electrons occupying the outer most electron shell of an atom while the electrons in the inner shell are core electrons. Lewis structures can be helpful to calculate the number of valence electrons.

Valence electrons can be filled in several electron shells as they are caused interaction between atoms and responsible for the formation of chemical bonds. Only valence electrons can contribute to the formation of a chemical bond and decide the reactivity of the element.

The general electronic configuration of group 13 is ns²np¹ has three valence electrons. It can be determined as group number - 10 = 13 - 10 = 3.

The general electronic configuration of group 18 is ns²np⁶ has eight valence electrons. It can be determined as group number - 10 = 18 - 10 = 8.

Learn more about valence electrons, here:

brainly.com/question/18612412

#SPJ2

Answer:

Explanation:

Atomicity is defined as the total number of atoms present in a molecule.

Answer:

The molar mass of N2O5 is 108 g/mol. 1296g of N2O5 has 1296 / 108 = 12 moles. 1 mole contains 6.022 x 10^23 molecules

Answer:

As either mass increases, the gravitational force between them

increases.

Explanation:

According to Newton's law of universal gravitation;

F α m1m2/r^2

That is, the force between two masses in a gravitational field is directly proportional to the product of the two masses and inversely proportional to their distance apart.

Hence, as either of the masses increase, the force of gravitation between the two masses increases. Hence the answer.

Answer:

1) pure water

2) 0.75 m CaCl2

3) 1.0 m NaCl

4) 0.5 m KBr

5) 1.5 m glucose (C6H12O6)

Explanation:

Boiling point elevation is a colligative property. Coligative properties are properties that depend on the amount of solute present in the system. The boiling point of solvents increase due to the presence of solutes.

The boiling point elevation depends on the number of particles the solute forms in solution and the molality of the solute. The more the number of particles formed by the solute and the greater the molality of the solute, the greater the magnitude of boiling point elevation.

The order of decreasing hoping point elevation is;

1) 0.75 m CaCl2

2) 1.0 m NaCl

3) 0.5 m KBr

4) 1.5 m glucose (C6H12O6)

Answer:

8.61 %

Explanation:

The percent of sodium hypochlorite in the bleach sample can be calculated using the following formula:

We input the data given by the problem:

Explanation:

High carbon concentration in the deep ocean means increased absorption of carbon to the atmosphere resulting to even greater and harmful amounts of carbon in the atmosphere. Therefore we need to keep a close eye of the deep ocean in the quest to monitor and pump out excess carbon from this part of marine life.

Answer:

2

Explanation:

The number of carbon atoms that are sp²-hybridized in this alkene is 2

Because all the single bonded carbon atoms in the alkene are  sp²-hybridized

There are three(3) single formed via sp² orbitals and one ( 1 ) PI bond formed via Pure-P-orbital

attached below is the some part of the solution

Answer:

Carboxyl, primary amine, amide, ester, and phenyl.

Explanation:

The functional groups present in the compound of aspartame are carboxyl, primary amine, amide, ester, and phenyl. Aspartame is an artificial non-saccharide sweetener which is 200 times sweeter than sucrose. This aspartame is commonly used as a sugar substitute in many foods and beverages. It has the trade names such as NutraSweet, Equal, and Canderel.

Answer:

1.20x10⁻²⁰μL

Explanation:

1cm³ is equal to 1milliliter. As we must know, 1milliliter = 1000 microliters, 1000μL. To convert the 1.20x10⁻²³mL we need to use the conversion factor: 1mL = 1000μL.

The volume of tantalum in μL is:

1.20x10⁻²³mL * (1000μL /1L) = 1.20x10⁻²⁰μL

Answer:

Explanation:

Answer is D 2,5-dimethylheptanal

You should accern the lowest possible number close to the parent name