on a sunny day, a rooftop solar panel delivers 55 w of power to the house at an emf of 17 v . part a how much current flows through the panel? express your answer with the appropriate units.

The period of a satellite, the time it takes for a complete revolution, depends on the satellite's radial distance. Hence, the correct option is a.

A satellite is an object in space that revolves around a planet, a moon, or even another satellite. Satellites, particularly those in the field of technology, enable the gathering of information and communication of information between two locations on Earth. Satellites can also be used for weather forecasting and military surveillance.

A revolution is one complete orbit around a central body for a satellite. The amount of time it takes for a satellite to complete one revolution is known as the satellite's period. As a result, it is clear that the period of a satellite depends on its radial distance. The closer a satellite is to the planet, the shorter its period would be, while the farther away it is, the longer its period would be.

To know more about satellite:

https://brainly.com/question/13266803

#SPJ11

The  correct option iD. Sand 20% Clay 20% Silt 60% best approximates the percentages of sand, clay, and silt in a silty loam.

Soil texture is the roughness or softness of soil or soil particles. Soil texture can either be smooth/soft or rough soil texture. The soil texture table helps to determine the percentages of sand, clay, and silt in a silty loam. Among the given options, the best approximation for the percentages of sand, clay, and silt in a silty loam is 20% sand, 60% silt, and 20% clay. Therefore, the correct option for the question is option D. Sand 20% Clay 20% Silt 60%So, this is the answer to your question.

More on soil: https://brainly.com/question/8395005

#SPJ11

The current through the lightbulb when a lightbulb is in series with a 2.0 ohm resistor is I = 1.78 A, 2.96 A.

The current through the lightbulb when a lightbulb is in series with a 2.0 ohm resistor is given by the Ohm's Law. Ohm's law states that current through a conductor between two points is directly proportional to the voltage across the two points. In other words, V = IR. Where V is the voltage, I is the current and R is the resistance. When the circuit is connected to a battery, the lightbulb dissipates 10W. Power can also be expressed as P = IV, where P is the power, I is the current and V is the voltage. We have V = IR and P = IV.

We can substitute V in terms of I from the first equation to the second equation.P = I²R=> I² = P/R=> I = √(P/R) = √(10W/2Ω) = 2.24 A. There are two possible answers. When we apply Ohm's Law to the circuit, I = V/R Where R = 2.0 Ω and V is the voltage across the resistor.I = V/2 = (10/2)^(1/2) A = 1.78 A.The other possible answer is the current through the light bulb.I = (10/2.0 + 2.0) A = 2.96 A. Therefore, the current through the lightbulb when a lightbulb is in series with a 2.0 ohm resistor is I = 1.78 A, 2.96 A.

More on resistors: https://brainly.com/question/30244234

#SPJ11

Answer:

It blocks some light, but not all.

Explanation:

The point of polarization is to get the light to travel in a single plane. The light waves occur in a single plane. The direction of the vibration of the waves is the same. With two polarized filters, it is possible to block out nearly all the light.

The work done on the saw by the force if the displacement is along the straight-line y = x that connects these two points is -640.0 J.

To calculate the work done on the saw by the force as it moves along the straight-line y = x that connects the two points, we need to first find the displacement vector and then use it to calculate the work done.

The displacement vector from the origin to point C is given by:

r = (4.0 m) i + (4.0 m) j

The force acting on the saw is given by:

F = -kxy² j = -2.50 (N m³) (x) (y²) j

Since it is moving along the straight-line y = x, we can substitute x = y into the expression for F:

F = -2.50 (N m³) (x) (y²) j = -2.50 (N m³) (y³) j

Substituting x = y = 4.0 m:

F = -2.50 (N m³) (4.0 m)³ j = -160.0 j N

The work done by the force is given by the dot product of the force and displacement vectors:

W = F · r = (-160.0 N j) · (4.0 m i + 4.0 m j)

W = (-160.0 N) (4.0 m cos(45°))

W = -640.0 J

Therefore, the work done on the saw by the force as it moves along the straight-line y = x that connects the two points is -640.0 J.

Find out more on Cartesian system here: https://brainly.com/question/4726772

#SPJ1

When one stationary object is replaced by another stationary object, the change between the two objects maybe perceived as the movement of a single object. This creates an optical illusion.

An optical illusion is defined as a visual phenomenon in which the information gathered by the eye is processed in a way that results in a false perception of reality or the visual impression of seeing something that is not present or incorrectly perceiving it. It is a misinterpretation of a visual stimulus caused by the brain's ability to misjudge sensory information.

It can happen when visual information is processed in the brain, and it can create an impression of movement that isn't there. This phenomenon occurs when an object is moving or when the eyes are moving around, but it can also happen when the object being looked at is stationary.

When one stationary object is replaced by another stationary object, the change between the two objects maybe perceived as the movement of a single object. This creates an optical illusion because the visual system is misled into thinking that the object is moving.

The brain continues to process visual information even when the object is stationary, creating the impression that the object is moving. This is why an optical illusion can be used to make a stationary object appear to move or to make a moving object appear to be stationary.

Learn more about optical illusion: https://brainly.com/question/3260067

#SPJ11

The orbital speed of the second satellite is 6.55 × 10³ m/s.

The formula used to find the orbital speed of a satellite is given as v=√(GM/r).

Therefore, the value of the first satellite's speed is given as v₁=1.89×104 m/s, and the radius is r₁=2.76×106 m. Using the above formula, the mass of the planet is given as:

M= v²r/G= (1.89×104 m/s)² (2.76×106 m)/(6.6743 × 10⁻¹¹ Nm²/kg²) = 5.31 × 10²⁴ kg.

Now, the orbital speed of the second satellite, given as v₂, is equal to:

v₂ = √(GM/r₂); where G = gravitational constant = 6.6743 × 10⁻¹¹ Nm²/kg²;

M = mass of the planet = 5.31 × 10²⁴ kg;

r₂ = radius of orbit of the second satellite = 6.98 × 10⁶ m.

Substituting the values given above, we get:

v₂ = √(GM/r₂)= √[(6.6743 × 10⁻¹¹ Nm²/kg²) × (5.31 × 10²⁴ kg) / (6.98 × 10⁶ m)] = 6.55 × 10³ m/s

To know more about "orbital speed" refer here:

https://brainly.com/question/541239#

#SPJ11

The magnetic force acting on the particle is perpendicular to both the velocity of the particle and the magnetic field. Therefore, the force is in the z direction.

The magnetic force is acting in the direction of the z-axis. When a positive charge q moves in the x direction with the local magnetic field in the y direction, the magnetic force acting on the particle is in the direction of the z-axis. It is also important to note that the magnitude of the magnetic force acting on the particle is proportional to the magnitude of the charge q and the magnitude of the magnetic field.

A magnetic field is a vector field that can be depicted by magnetic lines of force. They are concentrated in magnetic poles and tend to flow from the North Pole to the South Pole, with these imaginary lines never intersecting each other. Magnetic fields are present in regions of space around magnets and moving electric charges (electric currents).As per the right-hand rule, when a positive charge q moves in the x direction with the local magnetic field in the y direction, the magnetic force acting on the particle will be directed in the z-axis direction. The right-hand rule is a technique that can be used to establish the direction of a magnetic field around a wire or a conductor when there is a flow of electric current in it.

Read more about force :

https://brainly.com/question/12785175

#SPJ11

Answer:

Cassiopeia was one of the 48 constellations listed by the 2nd-century Greek astronomer Ptolemy, and it remains one of the 88 modern constellations today. It is easily recognizable due to its distinctive 'W' shape, formed by five bright stars. Visible at latitudes between +90° and −20°.

Answer:

Cassiopeia is a fascinating constellation with a rich history and cultural significance, as well as an important object of study for astronomers and scientists

Explanation:

Cassiopeia is a constellation located in the northern hemisphere of the sky. It is one of the 88 constellations officially recognized by the International Astronomical Union (IAU). The constellation is named after Queen Cassiopeia of Greek mythology, who was the wife of King Cepheus and mother of Princess Andromeda.

The constellation is easily recognizable for its distinctive shape, which looks like a "W" or "M" depending on its orientation in the sky. This shape is formed by five bright stars, which represent the Queen's throne and her legs. The brightest star in the constellation is known as Gamma Cassiopeiae, which is a massive blue-white star located about 550 light-years away from Earth.

Cassiopeia is visible in the sky all year round from most locations in the northern hemisphere, and it can be easily found by looking for its distinctive shape. It is also part of the Milky Way galaxy, which makes it a popular target for amateur astronomers who want to observe the stars and galaxies in our own galaxy.

Overall, Cassiopeia is a fascinating constellation with a rich history and cultural significance, as well as an important object of study for astronomers and scientists.

The average density of the neutron star that has a mass of about 1.5Msun and a radius of 10 kilometers rounded off to two significant figures is 5.9 × 10¹⁴ kg/cm³

The average density of a neutron star can be calculated using the following formula;`d = (3M)/(4πr³)`where `d` is the average density of the neutron star, `M` is the mass of the neutron star, and `r` is the radius of the neutron star.Using the given values in the formula, we get;`d = (3 × 1.5 × 1.989 × 10³⁰)/(4π × (10 × 10³)³)` = 5.9 × 10¹⁷ kg/m³To convert kg/m³ to kg/cm³, we can use the following conversion factor;1 m³ = 10⁶ cm³Therefore,1 kg/m³ = 10⁻³ kg/cm³So, the average density of the neutron star in kg/cm³ is;`d = (5.9 × 10¹⁷) × (10⁻³)` = 5.9 × 10¹⁴ kg/cm³Therefore, the average density of the neutron star is 5.9 × 10¹⁴ kg/cm³ (rounded to two significant figures).Answer: 5.9 × 10¹⁴ kg/cm³.

More on density: https://brainly.com/question/15700804

#SPJ11

The electrostatic force between 1nc and 1nc charges at a distance of 1 m from each other is 9.0 × 10^-9 N. The direction of the force is given by Coulomb's law and is along the line joining the two charges. It is either repulsive or attractive based on the type of the charges.

What is Coulomb's law? Coulomb's law is an equation used to calculate the electrostatic force between two charged particles. According to this law, the force between two point charges is proportional to the product of their charges and inversely proportional to the square of the distance between them. The equation for Coulomb's law is given by:

F = k * (q1 * q2) / r^2

Where F is the electrostatic force,k is Coulomb's constant,q1 and q2 are the charges of the particles, and r is the distance between the particles.

Given,

Charge of particle 1, q1 = 1 nc

Charge of particle 2, q2 = 1

distance between particles, r = 1

coulomb's constant, k = 9 × 10^9 N m^2/C^2

Now, we can use Coulomb's law to calculate the electrostatic force between the two charges. Substituting the given values in the equation:

F = k * (q1 * q2) / r^2= 9 × 10^9 N m^2/C^2 * (1 × 10^-9 C) * (1 × 10^-9 C) / (1 m)^2= 9.0 × 10^-9 N

Thus, the electrostatic force between 1nc and 1nc charges at a distance of 1 m from each other is 9.0 × 10^-9 N. The direction of the force is given by Coulomb's law and is along the line joining the two charges. It is either repulsive or attractive based on the type of the charges.

Learn more about  electrostatic force  at brainly.com/question/24013868

#SPJ11

Answer: The model star/planet would have to be 1,000 km away from the next closest star.

Explanation:
We need to find out the distance required for the distances in the system to be in scale.

Let's use the proportion to solve the problem:

1 m/4 × 10⁷ km = x/4 × 10¹³ km

Where x is the distance required for the distances in the system to be in scale.

Cross-multiply: 4 × 10¹³ km × 1 m = 4 × 10⁷ km × x

Simplify: 4 × 10¹³ m = 4 × 10⁷ x

Divide both sides by 4 × 10⁷ :1 × 10⁶ = x

Therefore, the distance required for the distances in the system to be in scale is 1 × 10⁶ m or 1,000 km.

So the model star/planet would have to be 1,000 km away from the next closest star.

Learn more about distance here

https://brainly.com/question/26550516

#SPJ11

The speed of water at the point with a radius of 0.150 m is 16.97 m/s while the radius of the pipe at the point where the water speed is 2.90 m/s is 0.0682 m.

a) To find the speed of the water at a point of a circular pipe where the radius is 0.150 m if the water is flowing into this pipe at a steady rate of 1.20 m³/s, we'll use the equation;

Q = A₁V₁ = A₂V₂ Where Q = Flow rate (m³/s)A₁ = Cross-sectional area at one point (m²)V₁ = Velocity of water at one point (m/s)A₂ = Cross-sectional area at a second point (m²)V₂ = Velocity of water at the second point (m/s)At one point in the pipe, the radius is 0.150 m.Therefore, the cross-sectional area, A₁ is given by:

A₁ = πr₁² = π (0.150 m)² = 0.0707 m²Given that the water is flowing into the pipe at a steady rate of 1.20 m³/s, we can write;Q = A₁V₁1.20 m³/s = 0.0707 m² V₁V₁ = 1.20/0.0707V₁ = 16.97 m/s.Therefore, the speed of water at the point with a radius of 0.150 m is 16.97 m/s.

b) To find the radius of the pipe at a point where the water speed is 2.90 m/s, we'll use the same equation as in part (a);Q = A₁V₁ = A₂V₂At a second point in the pipe, the water speed is 2.90 m/s.Given that the water completely fills the pipe, we know that the volume flow rate, Q will remain constant at 1.20 m³/s.So, we have:

Q = A₁V₁ = A₂V₂We know that A₁ = πr₁²So, Q = πr₁²V₁Also, we know that A₂ = πr₂²So, Q = πr₂²V₂Since the volume flow rate is constant, we can equate both equations,πr₁²V₁ = πr₂²V₂Dividing both sides of the equation by π, we have;r₁²V₁ = r₂²V₂But we are interested in finding the radius of the pipe at the second point, r₂.So, we can express r₁ in terms of r₂ using the relationship between the cross-sectional areas;

A₁ = A₂r₁² = (A₂/A₁)²r₂²r₁ = r₂ (A₂/A₁)^(1/2).We know that A₁ = πr₁²We can find A₂ using the fact that the water completely fills the pipe;

A₁V₁ = A₂V₂πr₁²V₁ = A₂V₂π(0.150 m)²(16.97 m/s) = A₂(2.90 m/s)A₂ = π(0.150 m)²(16.97 m/s)/(2.90 m/s)A₂ = 0.0707 m²

So,r₂ = r₁(A₂/A₁)^(1/2)r₂ = 0.150 m × (0.0707 m²/π)/(0.0150 m²)^(1/2)r₂ = 0.0682 m. Therefore, the radius of the pipe at the point where the water speed is 2.90 m/s is 0.0682 m.

More on velocity: https://brainly.com/question/6293650

#SPJ11

The change in momentum of a dynamic cart acted upon by the force of a spring is related to the impulse.Impulse is equal to the change in momentum of an object. The force that acts on an object over a given time period determines the impulse. It is the product of force and time.

Impulse, in fact, is also equal to the total momentum of the object before the force is applied. Impulse is a vector quantity with the same direction as the force, as well as the momentum.

The impulse delivered to the cart by the spring will be equal and opposite to the impulse exerted by the cart on the spring, according to Newton's third law of motion.

As a result, the change in momentum of the dynamic cart due to the force of a spring is related to the impulse.

Learn more about force: https://brainly.com/question/12970081

#SPJ11

We can see the moons should be ranked in the following order from oldest to youngest:

A moon is a natural satellite that orbits a planet. Moons are typically much smaller than their parent planets and are held in orbit by the planet's gravity. They come in a variety of sizes and shapes, and can be composed of a wide range of materials, such as rock, ice, or a mixture of both.

Moons play an important role in our solar system. They help stabilize the orbits of planets, contribute to tidal forces, and may even play a role in the formation and evolution of planets themselves.

Learn more about moon on https://brainly.com/question/12676209

#SPJ1

The following formula can be used to determine the work involved in moving a charge via an electric potential difference:

W = qΔV

where W stands for work completed, q for charge transported, and V for potential difference.

Inputting the values provided yields:

W = (3.0 C) x (1.5 V) = 4.5 J

As a result, 3.0 C moving across a 1.5 V electric potential differential requires 4.5 J of labour.

Response: D) 4.5 J

learn more about electric potential here:

https://brainly.com/question/12645463

#SPJ4

Use the equation for elastic potential energy to determine how far a spring must be squeezed to store a given quantity of energy. Adjust the equation to account for x, then, if required, convert to centimeters.

The elastic potential energy equation must be used to determine how far a spring would have to be compressed to store a certain quantity of energy. This equation links the spring constant and the distance a spring is compressed or extended to the energy contained in the spring. With the spring constant and the required quantity of energy to be stored in the spring, the equation may be changed to solve for the distance x. You may convert a distance measured in meters to centimeters by multiplying the result by 100. To prevent mistakes, it's crucial to utilise consistent units throughout the computation.

learn more about elastic potential here:

https://brainly.com/question/29311518

#SPJ4

Answer:

1. Net force: 60N (⭐️)

Direction: West

2. Net force: 60N

Direction: East

3. Net force: 18N (⭐️)

Direction: East

4. Net force: 20N

Direction: No movement

5. Net force: 20N

Direction: No movement

Explanation:

Hope you understand :)

The position expectation value as a function of time is constant and is equal to L/3.

Given a particle in an infinite square well potential has an initial wave function Ψ (x, t = 0) = Ax (L - x).The time evolution of the state vector: The time evolution of the state vector is given by Ψ(x,t) = ΣC_nΨ_n (x) e^(-iE_n t/h).The expectation value of the position as a function of time:The expectation value of the position as a function of time is given by the formula given below:x = Σa_n^2x_nΨ_n(x)Ψ_n*(x). Where,

a_n is the coefficient for each energy level.

Energy levels for infinite square well potential is given byE_n = n^2h^2 / 8mL^2Now, let us find the value of coefficient A. We know that a particle in a square well is normalized using the following formula:

∫Ψ^2 dx = 1. 0 to L∫Ax(L-x)^2dx = 1A(L^3)/3 = 1, A = √(3/L^3).

Now, the wavefunction for the particle is given by:

Ψ (x, t = 0)

= Ax (L - x)

= √(3/L^3) x (L - x).

Now, we can express this wave function in terms of the energy eigenfunctions as below:

Ψ (x, t = 0)

= Σ a_nΨ_n (x)

= Σa_n sin((nΠx)/L).

We can calculate the value of coefficient a_n by integrating the product of the initial wavefunction with the energy eigenfunctions, which is given by: a_n = 2/L ∫Ψ(x, t = 0) sin((nΠx)/L) dx.

Now, let us calculate the value of coefficient

a_n.a_n = 2/L ∫Ψ(x, t = 0) sin((nΠx)/L) dxa_n

= 2/L ∫√(3/L^3) x (L - x)sin((nΠx)/L) dxa_n = 2√3/L^2 ∫x(L - x)sin((nΠx)/L) dx.

From the previous results of integration,

a_n = (-1)^n+1 24√3/nΠ^3

a_n = (-1)^n+1 24√3/nΠ^3

Ψ(x,t) = ∑ a_nΨ_n(x) exp(-iE_n t/ℏ). Where E_n = n²h²π² / 2mL².

Substituting the values of a_n in the above formula, Ψ(x,t) = Σ(-1)^n+1 24√3/nΠ^3 sin(nΠx/L) exp(-in²π²h²t/2mL²ℏ²). Expectation value of the position as a function of time: The expectation value of the position is given by the formula, x = Σa_n²x_n. Where x_n is the position of nth energy level.

So, x_n = L/nSo,x = L∑a_n²/n From the previous results of coefficient, Σa_n²/n = 1/3. Now, x = L/3. Hence the position expectation value as a function of time is constant and is equal to L/3.

Learn more about expected value: brainly.com/question/24305645

#SPJ11

When the electron density is unevenly distributed around atoms in a covalent bond, it is considered to be polar.

Polar covalent bonds are a type of chemical bond formed between atoms that share electrons unequally. In a covalent bond, two atoms share electrons in order to achieve a stable electron configuration.

Polar covalent bonds occur when the electronegativity difference between the two atoms in the bond is significant enough to cause the electrons to be shared unequally. The atom with the higher electronegativity attracts the shared electrons closer to itself, resulting in a partial negative charge, while the other atom has a partial positive charge. This unequal distribution of charges in the bond creates a dipole moment, giving rise to a polar bond.

Learn about Polar covalent bonds here https://brainly.com/question/31063450

#SPJ1

A student must analyze data collected from an experiment in which a block of mass 2M traveling with a speed vo collides with a block of mass M that is initially at rest. After the collision, the two blocks stick together. Thus, the correct options are A and B.

The initial momentum of the system = the momentum of block 1 = (2M)vo. The final momentum of the system = the momentum of the combined blocks = (2M + M)uf = 3Muf. Therefore, the correct applications of the equation for the conservation of momentum that represent the initial and final momentum of the system for a completely inelastic collision between the blocks are:

2Mo = 3Muf, because the blocks stick together after the collision. 3Mvo = 3MUf, because the blocks stick together after the collision.

Therefore, the correct options are A and B.

Learn more about Momentum here:

https://brainly.com/question/30677308

#SPJ11

The wavelength of peak thermal emission from a sunspot can be calculated using Wien's law and a sunspot temperature of 3800 K.

Wien's Law states that the wavelength of peak thermal emission is inversely proportional to the temperature of the body emitting radiation. It is given by:

λ_max = b/T

where b is the Wien constant, 2.898 x 10^-3 m K, and T is the temperature of the emitting body. Substituting the given values into the equation,λ_max = b/Tλ_max = (2.898 x 10^-3 m K)/(3800 K)λ_max = 7.63 x 10^-7 m

The answer is expressed to three significant figures as 7.63 x 10^-7 m, with units of meters. Therefore, the wavelength of peak thermal emission from a sunspot is 7.63 x 10^-7 m.

Learn more about Wien's law  at  brainly.com/question/1417845

#SPJ11

The angular frequency of circular motion is given by the expression:

ω = [tex]\sqrt{qB/m}[/tex]

If the resulting trajectory of the charged particle is a circle, the angular frequency (ω) of the circular motion can be expressed in terms of g, m, and Bo as follows:

ω = [tex]\sqrt{qB/m}[/tex]

where q is the charge of the particle, B is the magnetic field strength, and m is the mass of the particle.

This formula is known as the cyclotron frequency equation.

The circular motion occurs because the magnetic force (F = qvB) on the charged particle is perpendicular to its velocity (v) and results in a centripetal force that keeps the particle in a circular path with a constant speed.

The angular frequency (ω) represents the rate at which the particle completes a full revolution (2π radians) around the center of the circular path per unit of time.

To know more about cyclotron frequency, refer: https://brainly.com/question/12946099

#SPJ11

Answer:

8.04 seconds

Explanation:

Assuming that the child starts from rest at the bottom of the hill and travels until she comes to a stop, we can use the following kinematic equation:

v_f^2 = v_i^2 + 2ad

where v_f is the final velocity (which is zero since the child comes to a stop), v_i is the initial velocity (which is the velocity at the bottom of the hill), a is the acceleration (-0.392 m/s²), and d is the distance traveled.

We can solve for d:

d = (v_f^2 - v_i^2) / (2a)

= (0 - v_i^2) / (2-0.392)

= v_i^2 / 0.784

Since the child is sliding along flat snow-covered ground, there is no change in elevation, so we can use the distance traveled from the bottom of the hill to the stopping point as the distance d.

To find the time it takes for the child to travel this distance, we can use the following kinematic equation:

d = v_it + 0.5a*t^2

where t is the time and all other variables are as previously defined.

Substituting the expression for d obtained above, we get:

v_i^2 / 0.784 = v_it + 0.5(-0.392)*t^2

Solving for t, we get:

t = (2 * v_i) / 0.392

We still need to find the value of v_i, the initial velocity of the child at the bottom of the hill. To do so, we can use conservation of energy. The child starts at rest at the top of the hill, so all the initial energy is potential energy. At the bottom of the hill, all the potential energy has been converted to kinetic energy. Assuming no energy is lost to friction, we can equate these two energies:

mgh = 0.5mv_i^2

where m is the mass of the child, g is the acceleration due to gravity (9.8 m/s²), and h is the height of the hill.

Solving for v_i, we get:

v_i = √(2gh)

Substituting this expression for v_i into the expression for t obtained earlier, we get:

t = (2 * √(2gh)) / 0.392

Plugging in the values of g, h, and a, we get:

t = (2 * √(29.820)) / 0.392 = 8.04 seconds

4.92 m/s for her final velocity.

The momentum of the skater before throwing the stone is:

p1 = m1 * v1 = 50 kg * 5 m/s = 250 kg*m/s

where m1 is the mass of the skater and v1 is her initial velocity.

When the skater throws the stone, the total momentum of the system (skater + stone) is conserved. The momentum of the stone is:

p2 = m2 * v2 = 2 kg * 2 m/s = 4 kg*m/s

where m2 is the mass of the stone and v2 is its velocity.

Let's assume the skater throws the stone in front of her. To conserve momentum, the skater will move in the opposite direction to the stone. Let's call the skater's final velocity v3. Then:

p1 = p2 + p3

where p3 is the momentum of the skater after throwing the stone. Substituting the values we get:

250 kgm/s = 4 kgm/s + 50 kg * v3

Solving for v3, we get:

v3 = (250 kgm/s - 4 kgm/s) / 50 kg = 4.92 m/s

So the skater's speed after throwing the stone in front of her is 4.92 m/s.

If the skater throws the stone behind her, the same conservation of momentum principle applies, and we get the same result of 4.92 m/s for her final velocity.

Sorry if I'm wrong

Here are some ideas for setting up the barber's salon based on the size of the space and the products available: The wooden chair should be positioned in the middle of the space, facing a wall.

The barber's workspace will be this. The room's other three walls should be covered with the three enormous mirrors. This will give the impression that there is more space present and enlarge the room. The mirrors should be angled to reflect both the client in the chair and the barber's work area. Over the chair, suspend the lightbulb from the ceiling. The barber salon will be able to operate in enough lighting thanks to this.The wooden chair should be positioned in the middle of the space,  The barber can set up a white sheet or a reflecting surface to improve illumination even further.

learn more about  salon  here:

https://brainly.com/question/15582651

#SPJ

42 km/h westward velocity can be expressed as: v is equal to (-42 km/h) * (1000 m/km) / (3600 s/h) * I . Therefore, the proper vector notation for the downward acceleration of magnitude 1.9 m/s^2 is -1.9 m/s^2 in the downward direction (k).

where the unit vector pointing west is called i. If we condense this expression, we get: v = -11.67 m/s * I Hence, -11.67 m/s in the westward direction is the correct vector notation for the 42 km/h westward velocity (i). North of the reference point, position 6.5 measured in metres, can be expressed as: r = 6.5 m * j where j represents the unit vector pointing north. Hence, 6.5 m in the northward direction is the correct vector notation for the location 6.5 m north of the reference point (j). It is possible to express a downward acceleration with a magnitude of 1.9 in m/s2 as follows: a = -1.9m/s^2 * k where k is the unit vector in the downward direction. Therefore, the proper vector notation for the downward acceleration of magnitude 1.9 m/s^2 is -1.9 m/s^2 in the downward direction (k).

learn more about vector notation here:

https://brainly.com/question/17264346

#SPJ4

The nephron loop is where the countercurrent mechanism predominantly operates. The Henle loop is the name of the nephron component.

Reabsorbing water and sodium chloride from the filtrate is its principal purpose. By creating urine that is extremely concentrated, this helps the body preserve water. Kidney cross slice showing the nephron (kidney tubule) in detail and its associated blood supply.

Renal tubular fluid is defined as fluid present within the lumen of a nephron loop. Glomerular filtrate is the term used to describe the fluid found inside Bowman's capsule. Urine would be regarded as the fluid contained in the collecting duct.

The fact that loop diuretics work on the Loop of Henle gives them their name. They function by blocking NKCC2 transporters in the thick ascending limb, preventing the reabsorption of sodium, potassium, and chloride.

Learn more about Nephron here:

https://brainly.com/question/12307837

#SPJ4

The Chevy will travel a distance f about 600m before catching up with the ford in the same direction of the motion.

The ford if travelling at 15m/s and it is 200 m ahead of the Chevy that is travelling in the same direction with a speed of 20m/s.

Now, we can use velocity = distance/time here,

Time of ford will be equal to the time of Chevy,

Time of ford = Distance/velocity of ford

Time of ford = S/15

Now, for the Chevy, the distance will be 200 more and the time will be same, so we will write,

Time of Chevy = (S+200)/20

(S+200)/20 = S/15

15S + 3000 = 20S

5S = -2000

S = -400m

Negative sign is showing the direction of the motion only, so we can ignore that.

So, the Chevy will travel 600 m before catching up with the ford.

To know more about speed, visit,

https://brainly.com/question/13943409

#SPJ4

In this experiment, the factor is the ambient color schemes. In other words, the independent variable is the ambient color schemes.

This means that the different colored light bulbs are the factor in the experiment. Three different rooms are used in the experiment and each room has a different colored light bulb.

A within-subjects experiment with 30 volunteers is being used to evaluate the impact of light color on mood. There is a single light bulb form used in the experiment with three different ambient color schemes.

Each room has a different colored light bulb, and there are three different rooms in the experiment. The factor in this experiment is the ambient color scheme because it is the independent variable.

To know more about ambient color Schemes:

https://brainly.com/question/30392329

#SPJ11