One of the purposes of this lab is to determine the order of the reaction with respect to the Allura Red dye by creating first and second-order graphs for all four trials. The correct order of the reaction is the one where the slopes of the graphs for the four trials are roughly the same. Why is this important when choosing the order of the reaction

Answer:

The formula of Al³⁺ and SO₄²⁻ is aluminum sulfate.

Explanation:

The formula for aluminum sulfate is Al₂(SO₄)₃. If we say in terms of ions. The ions are Al³⁺. It is a positive ion or the cation. Other ion is SO₄²⁻. It is sulfate ion. It is anion.

Aluminum sulphate is used in water purification and as a mordant in dyeing and printing textiles.

Hence, the formula of Al³⁺ and SO₄²⁻ is aluminum sulfate.

Answer:

A = 65.46 u

Explanation:

Given that,

The composition of zinc is as follows :

Zn-64 = 48.63%

Zn-66 = 27.90%

Zn-67 = 4.10%

Zn-68 = 18.75%

Zn-70 = .62%

We need to find the  average atomic mass of the given element. It can be solved as follows :

[tex]A=\dfrac{48.63\times 64+27.90\times 66+4.1\times 67+18.75\times 68+0.62\times 70}{100}\\A=65.46\ u[/tex]

So, the average atomic mass of zinc is 65.46 u.

the answer to the question is B.UV-B

Answer:

to the right (products side)

Explanation:

The equilibrium constant K describes the ratio between the concentration of products and reactants at equilibrium. For a general reaction:

a A + b B → c C + d D

The equilibrium constant expression is:

[tex]K = \frac{[C]^{c} [D]^{d} }{[A]^{a} [B]^{b} }[/tex]

A low value of K indicates that the concentration of products (C and D) is low in relation with the concentration of reactants (A and B).

Conversely, a high value of K indicated that the concentration of products is high compared with the concentration of reactants.

Since K = 6.4 × 10⁹ is a high value, the concentration of products is higher than the concentration of reactants at equilibrium. Thus, the position of the equilibrium is favored to the right.

Answer: Please, this question is not complete. I have attached the complete question.

The answer is in the attached picture below

Explanation:

The explanation is in the attached picture below

The structure of the alkene with the molecular formula [tex]C_6H_1_0[/tex] that reacts with [tex]Br_2[/tex]to give this compound is an alkene  called 1-hexene

The alkene is called 1-hexene. It has a double bond between the first and second carbon atoms. When it reacts with Br2, the bromine atoms add to the double bond, resulting in the formation of 1,2-dibromohexane.

The reaction is a radical addition reaction. The first step is the formation of a radical by the homolytic cleavage of one of the bromine atoms in Br2. This radical then adds to the double bond in the alkene, forming a new radical. The second bromine atom then adds to the radical, forming 1,2-dibromohexane

Learn more about addition reaction at:

https://brainly.com/question/1433809

#SPJ6

Complete question:

What mass of steam initially at 120 ⁰C is needed to warm 200g of water in a 100 g glass container from 20.0 oC to 50.0 ⁰C

Answer:

the initial mass of the steam is 10.82 g

Explanation:

Given;

mass of water, m₁ = 200 g

mass of the glass, m₂ = 100 g

temperature of the steam = 120 ⁰C

initial temperature of the water, 20⁰ C

final temperature of the water, = 50⁰ C

let the mass of the steam = m

specific heat capacity of water c = 1 cal/g ⁰ C

specific heat capacity of glass c₂ = 0.2 cal/g ⁰ C

laten heat of vaporization of steam L = 540 cal/g

Apply principle of conservation energy;

Heat given off by the steam = Heat absorbed by water + heat absorbed by glass

[tex]mc\Delta T_1 + mL + mc\Delta T_2 = m_1c\Delta T_3 + m_2c_2\Delta T_3\\\\mc\Delta T_1 + mL + mc\Delta T_2 = [m_1c + m_2c_2]\Delta T_3[/tex]

m(1) (120 - 100)  +  m(540)  + m(1) (100 - 50) = [200(1)  +  100(0.2)] (50 - 20)

20m + 540m + 50m = 6600

610 m = 6600

m = 6600 / 610

m = 10.82 g

Therefore, the initial mass of the steam is 10.82 g

Explanation:

[tex]here \: is \: your \: explanation : - \\ \\ given \: balanced \:equation \: = > \\ \\ 2 A=>C \: + \: 4D \\ \\ by \: this \: equation \: we \: get \: \\ \\ 2 \: moles \: of \: A \: produce \: 4 \: moles \: \\ \\ of \: D \\ \\ hence \: . \: 1 \: mole \: can \: produce \: = 4 \div 2 \\ \\ = > 2 \: moles \: \\ \\ so \: if \: 6 \: moles \: of \: A \: used \: then \: \\ \\ amount \: of \: D \: produced \: = (6 \times 2) \\ \\ = > 12 \: moles \: of \: D \\ \\ \mathcal\blue{ Hope \: it \: helps \: you \: (. ❛ ᴗ ❛.) }[/tex]

Answer:

answer is first one 1 will be less then that of hg coloumn

Answer:

See explanation

Explanation:

Science as a body of knowledge seeks to understand the processes that occur in nature so as to offer plausible explanations to those processes as well as redesign nature for our benefit.

Hence, science is an inquiry into nature with the aim to improve the life of the general population of the world.

Chemistry is the study of matter and the changes that matter undergoes. Chemistry lies at the very foundation of science since changes in matter is the basis for the processes that occur in nature.

Hence, chemistry plays a critical role in understanding nature as well as amending nature to improve the living condition of the world's rapidly growing population.

Answer:

C

Explanation:

Think of 'exo' as exit and 'thermic' as relating to thermal energy/ heat. Thus, an exothermic release thermal energy as the reaction proceeds.

In an exothermic reaction, the total energy of the products is lesser than that of the reactants and ΔH (change in energy) is less than zero.

When heat is absorbed as the reaction proceeds, the chemical reaction is an endothermic reaction.

Answer:

b. The anion affects the color of the solution more than the intensity of the color.

Explanation:

An ionic compound is one that is made up of ions held together by electrostatic forces. The ions are made up of positively charged ions known as cations and negatively charged ions known as anions. In compounds with a high ionic attribute, anions produce colorless compounds. But compounds that have less ionic attributes produce deeper colors like black and red. When in solutions, ionic compounds take on color and this is because of the anion that absorbs infrared light energy.

Answer:

60 q

Explanation:

The conversion factor is 100; so 1 quintal = 100 kilograms. In other words, the value in q multiply by 100 to get a value in kg.

Answer:

volume = mass/density

Here, volume = 80g/1.59gcm-3 → 50.314 cm3

Explanation:

Answer:

mainly metal oxide use to react with both acid and bases to form salts such as zinc, aluminum etc.

Answer:

The rate of the reverse reaction before any addition of CH3CO2- is zero

Explanation:

When the reaction is in equilibrium:

HCH3CO2(aq) + H2O ⇄ H3O+(l)(aq) + CH3CO2^-(aq)

The reaction quotient, Q = Ka and no more products or reactants are produced because their concentrations are in the right proportion.

Now, as no reaction occurs,

Answer:

55.44L of the 0.17M NaOH are required

Explanation:

Phosphoric acid, H3PO4, reacts with NaOH as follows:

H3PO4 + 3NaOH → Na3PO4 + 3H2O

Where 1 mole of H3PO4 reacts with 3 moles of NaOH

To solve this question we need to find the moles of H3PO4 in the aliquot. Using the balanced equation we can find the moles of NaOH and its volume with the concentration (0.17M) as follows:

Moles H3PO4:

15.4mL = 0.0154L * (0.204mol/L) = 0.00314 moles H3PO4

Moles NaOH:

0.00314 moles H3PO4 * (3mol NaOH / 1mol H3PO4) = 0.009425moles NaOH

Volume NaOH:

0.009425moles NaOH * (1L/0.17moles NaOH) = 0.05544L 0.17M NaOH =

Answer:

liquid junction potentials

when a cell contains a boundary between two electrolytic solutions of different composition or concentration, a liquid junction potential is developed due to the "diffusion of the various components at characteristic rates in the boundary zone."

#carryonlearning

Answer:

Li(s) + H2O(l) -----> LiOH(aq) + H2(g)

Ca(s) + 2H2O(l) ---------------> Ca(OH)2(aq) + H2(g)

Explanation:

Metals react with water to yield the metal hydroxide and hydrogen gas as shown in the answer above.

The reaction equations were balanced, the number of atoms of each element on both side of the reaction equation is exactly the same.

This is the way to write a balanced reaction equation for the species shown in the question.

Answer:

Option B. The reaction will shift to the left in the direction of the reactants.

Explanation:

The equation for the reaction is given below:

CO₂ + 2H₂O <=> CH₄ + O₂

Enthalpy change (ΔH) = +890 KJ

The reaction illustrated by the equation is endothermic reaction since the enthalpy change (ΔH) is positive.

Increasing the temperature of an endothermic reaction will shift the equilibrium position to the right and decrease the temperature will shift the equilibrium position to the left.

Therefore, decreasing the temperature of the system illustrated by the equation above, will shift the reaction to the left in the direction of the reactants.

Thus, option B gives the right answer to the question.

Answer:

Hydrogen bonding - London dispersion forces - dipole-dipole interactions

Strongest ----> Weakest

Answer:

n = 0.0814 mol

Explanation:

Given mass, m = 35.7g

The molar mass of Tin(IV) bromate, M = 438.33 g/mol

We need to find the number of moles of bromine. We know that,

No. of moles = given mass/molar mass

So,

[tex]n=\dfrac{35.7}{438.33}\\\\n=0.0814\ mol[/tex]

So, there are 0.0814 moles of bromine in 35.7g of  Tin(IV) bromate.

Answer:

A. the Law of Multiple Properties

Answer:

A. the law of multiple proportions

Answer:

Lewis structure of polyatomic formate anion.

Explanation:

To draw Lewis structure for any chemical species,

1)Count the total number of valence electrons present in it.

This can be obtained by adding valence electrons of each constituent atom.

2)Arrange those valence electrons in such a way that each atom should attain eight electrons around it to satisfy octet theory.

The structure of formate ion and its Lewis structure are shown below:

HCOO- is the formate ion.

It has total:

1+4+6+6+1 = 18 valence electrons.

Since, hydrogen has one, carbon has four and oxygen has six valence electrons and the charge of the anion is one.

Arrange this 18 electrons in such a way that each atom should get 8 electrons around it.

Resonance structures of formate ion:

Answer:

The answer is growth rate

Explanation:

it will help you

Answer:

1900grams of boiling water

Explanation:

0,c=19

100,c=19×100

1900grams

Answer:

7.640 kg

Explanation:

Step 1: Write the balanced complete combustion equation for ethanol

C₂H₆O + 3 O₂ ⇒ 2 CO₂ + 3 H₂O

Step 2: Calculate the moles corresponding to 4 kg (4000 g) of C₂H₆O

The molar mass of C₂H₆O is 46.07 g/mol.

4000 g × 1 mol/46.07 g = 86.82 mol

Step 3: Calculate the moles of CO₂ released

86.82 mol C₂H₆O × 2 mol CO₂/1 mol C₂H₆O = 173.6 mol CO₂

Step 4: Calculate the mass corresponding to 173.6 moles of CO₂

The molar mass of CO₂ is 44.01 g/mol.

173.6 mol × 44.01 g/mol = 7640 g = 7.640 kg