ort
Which is a primary alcohol?
0 3-pentanol
2-propanol
1-ethanol
4-octanol
urvey
Lig A Moving to another question will save this response.

Answer:

62.5 ml of 0.032 M  KMnO₄ are required to react with 50.0 ml of 0.100 molar H₂C₂O₄ in the presence of excess H₂SO₄

Explanation:

The balanced reaction is:

2 KMnO₄ + 5 H₂C₂O₄ + 3 H₂SO₄ → K₂SO₄ + 2 MnSO₄ + 8 H₂O + 10 CO₂

By stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

Molarity or Molar Concentration is the number of moles of solute that are dissolved in a certain volume.

The molarity of a solution is calculated by dividing the moles of the solute by the volume of the solution:

[tex]Molarity=\frac{number of moles of solute}{volume}[/tex]

Molarity is expressed in units [tex]\frac{moles}{liter}[/tex]

In this case, 50 mL (0.05 L) of 0.1 M H₂C₂O₄ react. So, replacing the data in the definition of molarity:

[tex]0.1 M=\frac{number of moles of solute}{0.05 L}[/tex]

Solving:

number of moles of solute= 0.1 M*0.05 L

number of moles of solute= 0.005 moles

So, 0.005 moles of H₂C₂O₄ react.  Then you can apply the following rule of three: if by stoichiometry 5 moles of H₂C₂O₄ react with 2 moles of KMnO₄, 0.005 moles of H₂C₂O₄ react with how many moles of KMnO₄?

[tex]moles of KMnO_{4} =\frac{0.005moles of H_{2} C_{2} O_{4}* 2moles of KMnO_{4} }{5moles of H_{2} C_{2} O_{4} }[/tex]

moles of KMnO₄= 0.002 moles

Knowing that the molarity of KMnO₄ is 0.032 M, replacing in its definition and solving:

[tex]0.032 M=\frac{0.002 moles}{volume}[/tex]

[tex]volume=\frac{0.002 moles}{0.032 M}[/tex]

volume= 0.0625 L= 62.5 mL

62.5 ml of 0.032 M  KMnO₄ are required to react with 50.0 ml of 0.100 molar H₂C₂O₄ in the presence of excess H₂SO₄

Answer:

4.858 g

Explanation:

Start with the formula

density = [tex]\frac{mass}{volume}[/tex]

density = 1.98 g/mL

volume = 2.45 mL

mass = ??

rearrange the formula to solve for mass

(density) x (volume) = mass

Add in the substitutes and solve for mass

1.98 g/mL x 2.45 mL = 4.858 g

The number of replaceable electrons in an atom is called its valency.

Examples

Thanks !

☺️☺️☺️☺️☺️☺️☺️

Answer:

the combining capacity if an atom is know as valency.

the property of an element that determines the number of other atimd with an aton if the element can combine.

The structures are shown in the image attached.

A structural formula is the representation of the molecule in which all atoms and bonds in the molecule are shown.

Since the question requires that all the lone pairs, formal charges and sigma and pi bonds should be shown, then the simple condensed structural formula becomes insufficient in this case.

I have attached images of the structural formula of sodium benzoate (image 1), benzoic acid (image 2)  and tetrahydrofuran (image 3).

All the formal charges, lone pairs as well as sigma and pi bonds are fully shown.

https://brainly.com/question/9988658

Explanation:

here's the answer to your question

Answer:

Methane and chlorine

If a mixture of methane and chlorine is exposed to a flame, it explodes - producing carbon and hydrogen chloride. This is not a very useful reaction! The reaction we are going to explore is a more gentle one between methane and chlorine in the presence of ultraviolet light - typically sunlight. This is a good example of a photochemical reaction - a reaction brought about by light.

CH4+Cl2+energy→CH3Cl+HCl(3.4.2)

The organic product is chloromethane. One of the hydrogen atoms in the methane has been replaced by a chlorine atom, so this is a substitution reaction. However, the reaction doesn't stop there, and all the hydrogens in the methane can in turn be replaced by chlorine atoms.

Substitution reactions happen in which hydrogen atoms in the methane are replaced one at a time by chlorine atoms. You end up with a mixture of chloromethane, dichloromethane, trichloromethane and tetrachloromethane.

I hope this help you!:)

Explanation:

water is known as the mixture

Answer:

iv. Iron

water is not a mixture

hydrogen is the simplest element

air is pure

Answer:

The correct equation is "[tex]\frac{[Ni(H_2O)_3 (NH_3)]^{2+}}{[Ni(H_2O)_4]^{2+} [NH_3]}[/tex]".

Explanation:

According to the question,

Throughout an aqueous solution, [tex]Ni^{2+}[/tex] exist as [tex][Ni(H_2O)_4]^{2+}[/tex]

So,

⇒ [tex][Ni(H_2O)_4]^{2+} + 4NH_3 \rightleftharpoons [Ni(NH_3)_4]^{2+} + H_2O[/tex]

⇒ [tex]K_f = \frac{[Ni(NH_3)_4]^{2+}}{[Ni(H_2O)_4^{2+}] [NH_3]^4}[/tex]

Here, we have excluded [tex][H_2O][/tex] as concentration of water will be const.

Now,

This formation of [tex][Ni(NH_3)_4]^{2+}[/tex] proceeds via several steps,

Step 1:

⇒ [tex][Ni(H_2O)_4]^{2+}+NH_3 \rightleftharpoons [Ni(H_2O)_3 (NH_3)]^{2+} + H_2O[/tex]

⇒ [tex]K_1 = \frac{[Ni(H_2O)_3 (NH_3)]^{2+}}{[Ni(H_2O)_4]^{2+} [NH_3]}[/tex]

Answer:

3

Explanation:

The electron shells are labelled as K,L,M,N,O,P, and Q or 1,2,3,4,5,6, and 7.

As we go from innermost shell outwards, this number denotes the number of subshell in the shell. Electrons in outer shells have higher average energy and travel farther from the nucleus than those in inner shells.

Hence, M shell contains s,p and d subshells.

Answer:

See explanation

Explanation:

The relationship between the activation energy and rate of reaction is best captured by the Arrhenius equation;

k= Ae^-Ea/RT

Where;

k= rate constant

A= pre-exponential factor

Ea=activation energy

R= gas constant

T= temperature

We can see from the foregoing that, as the activation energy increases, the rate of reaction decreases and vice versa. reactions that have a very high activation energy are markedly slow.

Since the activation energy for the malonic acid reaction is found to be greater than the activation energy for the tartaric acid reaction, then the rate of the malonic acid reaction(k) will be slower than that of the tartaric acid reaction.

The study of chemistry and bonds is called chemistry. There are two types of elements metal and nonmetals.

The correct answer is mentioned below.

The equation is as follows:-

[tex]k= Ae^{-Ea/RT[/tex] Where;

We can see from the foregoing that, as the activation energy increases, the rate of reaction decreases and vice versa. reactions that have very high activation energy are markedly slow. Since the activation energy for the malonic acid reaction is found to be greater than the activation energy for the tartaric acid reaction, then the rate of the malonic acid reaction(k) will be slower than that of the tartaric acid reaction.

Hence, the correct answer is mentioned above.

For more information about the equation, refer to the link:-

https://brainly.com/question/1388366

Answer:

0.696 m

Explanation:

We'll begin by calculating the number of mole in 16.7 g of C₆H₁₂O₆. This can be obtained as follow:

Mass of C₆H₁₂O₆ = 16.7 g

Molar mass of C₆H₁₂O₆ = (6×12) + (12×1) + (6×16)

= 72 + 12 + 96

= 180 g/mol

Mole of C₆H₁₂O₆ =?

Mole = mass / molar mass

Mole of C₆H₁₂O₆ = 16.7 / 180

Mole of C₆H₁₂O₆ = 0.093 mole

Next, we shall convert 133.6 g of water to Kg. This can be obtained as follow:

1000 g = 1 Kg

Therefore,

133.6 g = 133.6 g × 1 Kg / 1000 g

133.6 g = 0.1336 Kg

Thus, 133.6 g is equivalent to 0.1336 Kg.

Finally, we shall determine the molality of the solution. This can be obtained as illustrated below:

Mole of C₆H₁₂O₆ = 0.093 mole

Mass of water = 0.1336 Kg

Molality =?

Molality = mole / mass of water (in Kg)

Molality = 0.093 / 0.1336

Molality = 0.696 m

Therefore, the molality of the solution is 0.696 m

Answer:

a. Decrease

b. Increase

c. Increase

d. No effect

Explanation:

Glycolysis is present in muscle cells which converts glucose to pyruvate, water and NADH. It produces two molecules of ATP. Cellular respiration produces more molecules of ATP from pyruvate in mitochondria. Glycolysis increases in pyruvate kinase.

a. Loss of binding site for fructose 1,6-bisphosphate in pyruvate kinase: Decrease

b. Loss of allosteric binding site for ATP in pyruvate kinase: No effect

c. Loss of allosteric binding site for AMP in phosphofructokinase: Increase

d. Loss of regulatory binding site for ATP in phosphofructokinase: Increase

A. An important substrate in the glycolysis pathway is fructose 1,6-bisphosphate. It stimulates pyruvate kinase, an essential enzyme in glycolysis. The amount of pyruvate kinase that is activated will decrease if the fructose 1,6-bisphosphate binding site in pyruvate kinase is eliminated. As a result the rate of glycolysis in the muscle cells will probably decrease.

B. The allosteric ATP binding site of pyruvate kinase controls how active the enzyme is. However, pyruvate kinase is not significantly regulated by ATP in muscle cells. Therefore, it is unlikely that deletion of the ATP-binding allosteric site in pyruvate kinase would have no effect on the rate of glycolysis in muscle cells.

C. The rate-limiting enzyme in glycolysis, phosphofructokinase, is activated from all forms by AMP. It increases the rate of glycolysis by stimulating the activity of phosphofructokinase. If the allosteric binding site for AMP is eliminated, phosphofructokinase activation will be reduced. As a result, the rate of glycolysis in muscle cells will decrease.

D. Phosphofructokinase is inhibited allosterically by ATP. It regulates the rate of glycolysis by a feedback mechanism. High ATP concentrations cause phosphofructokinase to bind to its regulatory site, limiting its activity and delaying glycolysis. If the regulatory binding site for ATP is eliminated, the inhibitory action of ATP on phosphofructokinase would be lost. As a result, muscle cells will glycolysis at a faster rate.

Learn more about glycolysis, here:

https://brainly.com/question/26990754

#SPJ6

Answer:

a. True

Explanation:

There is strong inhibition of Carbon Anhydrase by Aceta-zolamide Carbonic Anhydrase. The drug acetazolamide is used as diuretic which increase the urine production in human body. It lowers pressure in eye in glaucoma.

Answer:

Mass=Moles × RFM

Mass= 0.28M× 164

Mass= 45.92 grammes

Answer:

There is no difference between the two.

Explanation:

They both show the same volume. But, adding decimal places shows the least count of the instrument used and is more acceptable when recording values in scientific experiments

Answer:

Answer:

Both have solutions in the  graduated cylinder.

Explanation:

Recording the amount of alcohol used as the difference between two masses is the wrong method used for measuring tert-butyl alcohol for the experiment.  For measuring tert-butyl alcohol for this experiment, the student has to measure the two masses when both the graduated cylinders has solution of tert-butyl alcohol not when one of it is empty (having no tert-butyl alcohol ).

The wrong aspect is that the liquid didn't need to be weighed. Instead the volume should have been recorded with the aid of the graduated cylinder.

This is a cylinder with marked readings and is used to measure the volume of liquids in the laboratory.

The graduated cylinder will accurately measure the amount of  alcohol used due to it being volatile and the mass fluctuating during the measurement.

Read  more about Graduated cylinder here https://brainly.com/question/24869562

In the original solution you have the mixture of a weak acid (Hypochlorous acid) and its conjugate base (Sodium hypochlorite). That is a buffer.

The barium hydroxide will react with hypochlorous acid. If this reaction cause the complete reaction of hypochlorous acid, the buffer break its capacity and the pH change in several units. In this case:

The addition of barium hydroxide will raise the pH slightly because the buffer still working.

The initial moles of those species are:

Hypochlorous acid:

[tex]1L * \frac{0.370mol}{1L} = 0.370 moles[/tex]

Sodium hypochlorite:

[tex]1L * \frac{0.493mol}{1L} = 0.493 moles[/tex]

Now, a strong acid as barium hydroxide (Ba(OH)₂) reacts with a weak acid as hypochlorous acid (HClO) as follows:

Ba(OH)₂ + 2HClO → Ba(ClO)₂ + 2H₂O

For a complete reaction of 0.092 moles of barium hydroxide are required:

[tex]0.092 moles Ba(OH)_2*\frac{2mol HClO}{1molBa(OH)_2} = 0.184 moles HClO[/tex]

As there are 0.370 moles, the moles of HClO after the reaction are:

0.370 moles - 0.184 moles = 0.186 moles of HClO will remain

As you still have hypochlorite and hypochlorous acid you still have a buffer.

Thus, the pH will raise slightly because the amount of acid is decreasing and slightly because the buffer can keep the pH.

Learn more about buffers in:

https://brainly.com/question/24302294

Answer:

[tex]K=1.7x10^{-3}[/tex]

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to solve this problem by firstly setting up the equilibrium expression for the given reaction, in agreement to the law of mass action:

[tex]K=\frac{[NO]^2}{[N_2][O_2]}[/tex]

Next, we plug in the given concentrations on the data table to obtain:

[tex]K=\frac{(0.034)^2}{(0.69)(0.98)}\\\\K=1.7x10^{-3}[/tex]

Regards!

Answer:

c. C3H9N2O2

Explanation:

The empirical formula of a compound is defined as the simplest whole number ratio of atoms present in a molecule. To solve this question we need to convert the mass of each atom to moles. With the moles we can find the ratio as follows:

Moles N -Molar mass: 14.01g/mol-

0.420g N * (1mol/14.01g) = 0.0300 moles N

Moles O -Molar mass: 16g/mol-

0.480g O * (1mol/16g) = 0.0300 moles O

Moles C -Molar mass: 12.01g/mol-

0.540g C * (1mol/12.01g) = 0.0450 moles C

Moles H -Molar mass: 1.0g/mol-

0.135g H * (1mol/1g) = 0.135moles H

Dividing in the moles of N (Lower number of moles) the ratio of atoms is:

N = 0.0300 moles N / 0.0300 moles N = 1

O = 0.0300 moles O / 0.0300 moles N = 1

C = 0.0450 moles C / 0.0300 moles N = 1.5

H = 0.135 moles H / 0.0300 moles N = 4.5

As the empirical formula requires whole numbers, multiplying each ratio twice:

N = 2, O = 2, C = 3 and H = 9

And the empirical formula is:

b) (√)

c)(✓)

hsjdhfjdkskkshd

Answer :

volume of a gas = weight * 22.4 l / gram molecular weight

volume of o2 = ?

weight given = 20.5 g

gram molecular weight of oxygen = 32 (because of 2 oxygen atoms )

volume of oxygen = 20.5 * 22.4 / 32

volume of oxygen = 14.35 liters  

Explanation:

hope this helps you

if wrong just correct me

Answer:

D. -80m/s^2

Explanation:

V = u + at

5 = 65 + a (0.75)

0.75a = -60

a = -60/0.75

a = -80m/s^2

Therefore, is decelerating at 80m/s^2

Answer:

[tex]\boxed {\boxed {\sf D. \ 80 \ m/s^2 \ down}}[/tex]

Explanation:

We are asked to find the acceleration of a skydiver. Acceleration is the change in velocity over the change in time, so the formula for calculating acceleration is:

[tex]a= \frac{v_f-v_i}{t}[/tex]

The skydiver was initially traveling 65 meters per second, then he slowed down to a final velocity of 5 meters per second. He slowed down in 0.75 seconds.

[tex]\bullet \ v_f = 5 \ m/s \\\bullet \ v_i= 65 \ m/s \\\bullet \ t= 0.75 \ s[/tex]

Substitute the values into the formula.

[tex]a= \frac{ 5 \ m/s - 65 \ m/s}{0.75 \ s}[/tex]

Solve the numerator.

[tex]a= \frac{-60 \ m/s}{0.75 \ s}[/tex]

Divide.

[tex]a= -80 \ m/s^2[/tex]

The acceleration of the skydiver is -80 meters per second squared or 80 meters per second squared down. The skydiver is slowing down or decelerating, so the acceleration is negative or down.

Answer:

(B). it's metallic bonding

Explanation:

elements are carbons and hydrogen

Answer:

Carbon and Hydrogen.

Explanation:

It’s in the name Hydro (H) Carbon (C)

Answer:

1860g.

Explanation:

It is known that the molar mass of C2H6O2 is 62.08 g/mol.,

Now to  solve for the number of moles of solute, one must multiply both

sides by the volume:

moles of solute = (6.00 M)(5.00 L) = 30.0 mol

Notice since the definition of molarity is mol/L, the

product M × L gives mol, a unit of amount.

Use the molar  mass of C3H8O3, one can convert mol to g:

Mass m =30 mol × 62.08 g/mol

m = 1860g.

Hence, there are 1,860 g of C2H6O2 in the specified amount of

engine coolant.