(a) Cost of goods sold on July 27= $30,000 (As the recent purchases are used for selling)
(b) Inventory on July 31=LIFO inventory= $10,000. (Cost of goods available for sale - Cost of goods sold)
Given: Perpetual inventory using LIFOB eg. inventory = $12,000 Purchases = $30,000Sales = $40,000
a)Cost of goods sold on July 27In a perpetual inventory system, the cost of goods sold can be calculated using the following formula:Cost of goods sold = Beginning inventory + Purchases - Ending inventory Here, ending inventory is not given so we can use the LIFO method to calculate the cost of goods sold on July 27.In the LIFO method, we assume that the most recent purchases are sold first and so the ending inventory is based on the earlier purchases.The cost of goods sold can be calculated as follows:Inventory as on July 1 = $12,000Cost of purchases during the month = $30,000Total cost of goods available for sale = $42,000Cost of goods sold = Sales x Cost of goods sold percentageThe cost of goods sold percentage can be calculated as follows:Out of $42,000, $12,000 is already the opening inventory, so the remaining $30,000 of purchases are sold first. Since the total sales are $40,000, this means that we have sold 75% of the available goods.Cost of goods sold percentage = 75%Cost of goods sold = $40,000 x 75%Cost of goods sold = $30,000Therefore, the cost of goods sold on July 27 was $30,000.b) Inventory on July 31The inventory on July 31 can be calculated using the LIFO inventory method. In this method, we assume that the most recent purchases remain in the inventory and are not sold until the earlier purchases have been sold.Cost of goods available for sale = Beginning inventory + PurchasesCost of goods available for sale = $12,000 + $30,000Cost of goods available for sale = $42,000The cost of goods sold has already been calculated as $30,000.Inventory on July 31 = Cost of goods available for sale - Cost of goods soldInventory on July 31 = $42,000 - $30,000Inventory on July 31 = $12,000Therefore, the inventory on July 31 was $12,000.
To know more about Inventory , visit:
https://brainly.com/question/31146932
#SPJ11
Describe the accounting treatment for the disposal of property, plant, and equipment.
The accounting treatment for the disposal of property, plant, and equipment involves recognizing any gain or loss on disposal and removing the asset from the books. The gain or loss is determined by comparing the proceeds from the disposal with the carrying amount of the asset. The disposal is recorded in the income statement, and the asset is removed from the balance sheet.
When property, plant, and equipment are disposed of, the carrying amount of the asset is compared to the proceeds received from the disposal. If the proceeds exceed the carrying amount, a gain on disposal is recognized in the income statement. Conversely, if the proceeds are lower than the carrying amount, a loss on disposal is recorded. The gain or loss is calculated as the difference between the proceeds and the carrying amount. To remove the asset from the balance sheet, the carrying amount of the asset is reduced, typically by debiting an accumulated depreciation account and crediting the asset's cost or carrying value.
Simultaneously, the proceeds from the disposal are credited to the cash or receivables account. Overall, the accounting treatment for the disposal of property, plant, and equipment ensures that the gain or loss on disposal is appropriately recognized in the income statement and that the asset is removed from the balance sheet, reflecting the change in the entity's asset holdings.
learn more about accounting treatment here
https://brainly.com/question/32781410
#SPJ11
n the short run, a tool manufacturer has a fixed amount of capital. Labor is a variable input. The cost and output structure that the firm faces is depicted in the following table.
Labor supplied Total Physical Hourly Wage Total Wage Marginal
Factor
Product Rate $ Cost Cost
---------------------- ----------------------------- ------------------ ------------- ------------------
10 100 5 ? _____
11 109 7 ? ?
12 116 9 ? ?
13 121 11 ? ?
14 124 13 ? ?
15 125 15 ? ?
A). Derive at each level of labor supplied, the firm's total wage costs. (Enter numeric responses in the table above real number).
B). Derive, at each level of labor supplied, the firm's marginal factor cost.
To derive the firm's total wage costs at each level of labor supplied, we can use the formula: Total Wage Cost = Total Physical Product * Hourly Wage Rate.
Using this formula, we can fill in the table as follows:
Labor supplied Total Physical Product Hourly Wage Rate Total Wage Cost Marginal Factor Cost
10 100 5 500 -
11 109 7 763 263
12 116 9 1044 281
13 121 11 1331 287
14 124 13 1612 281
15 125 15 1875 263
To calculate the total wage cost, we multiply the total physical product by the hourly wage rate. For example, at a labor supply of 10, the total wage cost is 100 * 5 = 500.
To derive the marginal factor cost, we can calculate the change in total wage cost as labor supply increases by one unit. For example, at a labor supply of 11, the marginal factor cost is 763 - 500 = 263.
By applying this calculation for each level of labor supplied, we can complete the table.
To know more about wage costs click this link -
brainly.com/question/13025339
#SPJ11
1) The relevant monitoring mechanism for a company’s
account receivable is _______.
Select one:
A. the average payable period
B. called the credit instrument
C. the aging schedule
D. the auditing of
The aging schedule is the relevant monitoring mechanism for a company's accounts receivable. It is a report that categorizes the outstanding receivables based on the length of time they have been outstanding.
The aging schedule provides valuable information about the aging of receivables, allowing the company to assess the effectiveness of its credit policies and collection efforts.
By analyzing the aging schedule, the company can identify any potential issues with late payments or delinquent accounts and take appropriate actions, such as following up with customers or adjusting credit terms. This monitoring mechanism helps the company maintain control over its receivables, improve cash flow, and mitigate the risk of bad debts.
To know more about The aging schedule visit:-
brainly.com/question/31090397
#SPJ11
The Civil Rights Act of 1964 applies to businesses within the states through: The Necessary and Proper Clause The Commerce Clause The Fifth Amendment The fourteenth Amendment Question 49 Sally sues Judy for damages Judy caused from alleged negligence in a automobile collision. Judy must prove the case by a preponderance of the evidence. True False
False. In a civil case, the burden of proof typically falls on the plaintiff, not the defendant.
The Civil Rights Act of 1964 applies to businesses within the states through: The Commerce Clause. The Commerce Clause of the United States Constitution grants Congress the power to regulate interstate commerce. The Civil Rights Act of 1964 prohibits discrimination in various areas, including employment and public accommodations. Since these activities often involve interstate commerce, Congress relied on its authority under the Commerce Clause to pass and enforce the Civil Rights Act of 1964.
Regarding Question 49:
Sally, as the plaintiff, has the burden of proving her case by a preponderance of the evidence, which means she must show that it is more likely than not that Judy's negligence caused the damages. Judy, as the defendant, does not have to prove anything unless she raises a legal defense or countersues Sally.
Learn more about case here:
https://brainly.com/question/10909897
#SPJ11
16- An asset is expected to produce a net cash inflow of $70000 per year for the next 5 years, if the operating expenses is $30000 per year and the depreciation value is $10000 per year. If the effective income tax rate is 17%. Then, the income taxes in one year is a) $4500 b) $5100 c) $10500 d) $16500 e) $5700 17- Assume you invest 110,000$ in a bank at an interest rate of 6% per year. You would like to receive (X \$) every year and continuing forever. and ( 7X \$) every five years continuing forever. Determine the value of X. a) $2,944.1 b) $3,211.7 c) $2,676.4 d) $2,906.4 c) $3,452.3 18- What is the Capitalized Worth, when i=10% per year, of $3000 per year, starting in one year and continuing forever; and $5,000 at the end of fourth year, repeating every five years thereafter, and continuing forever. a) $4,4009 b) $5,9009 c) $3,9009 d) $3,4009 e) $5,4003
The income taxes in one year would be $10,500 (option c).
This is calculated by taking the net cash inflow of $70,000, subtracting the operating expenses of $30,000 and the depreciation value of $10,000, and then applying the income tax rate of 17%.
The value of X would be $2,944.1 (option a). This is determined using the perpetuity formula for annual payments: X = (110,000 * 0.06) / (1 - (1 + 0.06)^(-1)). To calculate the value of 7X every five years, we multiply X by 7.
The Capitalized Worth would be $4,4009 (option a). This is calculated by finding the present value of the perpetuity of $3,000 per year at an interest rate of 10%. Then, we add the present value of the $5,000 payment at the end of the fourth year, discounted for the same interest rate.
Learn more about operating expenses here:
https://brainly.com/question/15080057
#SPJ11
Discount loan. Up-Front Bank uses discount loans for all its customers who want one-year loans. Currently, the bank is providing one-year discount loar at 7.9%. What is the effective annual rate on these loans? If you were required to repay $250,000 at the end of the loan for one year, how much would th bank have given you at the start of the loan? If you were required to repay $250,000 at the end of the loan for one year, how much would the bank have given you at the start of the loan? (Round to the nearest dollar.)
To calculate the effective annual rate (EAR) on the discount loan, we can use the following formula: EAR = (1 + Discount Rate)^n - 1
In this case, the discount rate is 7.9% and the loan period is one year (n = 1).
EAR = (1 + 0.079)^1 - 1
EAR = 0.079 or 7.9%
Therefore, the effective annual rate on these loans is 7.9%.
To calculate how much the bank would have given you at the start of the loan, we can use the formula for discount loans:
Loan Amount = Face Value / (1 + Discount Rate)
In this case, the face value is $250,000 and the discount rate is 7.9%.
Loan Amount = $250,000 / (1 + 0.079)
Loan Amount = $250,000 / 1.079
Loan Amount ≈ $231,316 (rounded to the nearest dollar)
Therefore, the bank would have given you approximately $231,316 at the start of the loan.
Please note that the amount to be repaid at the end of the loan, $250,000, remains the same as stated in the question.
Learn more about here EAR here
https://brainly.com/question/31355139
#SPJ11
To calculate the effective annual rate (EAR) on the discount loan, we can use the following formula: EAR = (1 + Discount Rate)^n - 1
In this case, the discount rate is 7.9% and the loan period is one year (n = 1).
EAR = (1 + 0.079)^1 - 1
EAR = 0.079 or 7.9%
Therefore, the effective annual rate on these loans is 7.9%.
To calculate how much the bank would have given you at the start of the loan, we can use the formula for discount loans:
Loan Amount = Face Value / (1 + Discount Rate)
In this case, the face value is $250,000 and the discount rate is 7.9%.
Loan Amount = $250,000 / (1 + 0.079)
Loan Amount = $250,000 / 1.079
Loan Amount ≈ $231,316 (rounded to the nearest dollar)
Therefore, the bank would have given you approximately $231,316 at the start of the loan.
Please note that the amount to be repaid at the end of the loan, $250,000, remains the same as stated in the question.
Learn more about here EAR here
brainly.com/question/31355139
#SPJ11
Posting a loan in the accounting records b) Debits a) Credits CLEAR ANSWER SAVE ANSWER MacBook Air 2 the loan account (increasing liability).
Posting a loan in the accounting records debits the loan account and credits the liability account. The debit entry increases the loan account balance, reflecting the receipt of funds from the loan.
On the other hand, the credit entry is made to the liability account, increasing the company's overall liabilities. When a company borrows money, it receives cash (an asset) from the lender, which is recorded as a debit to the loan account. This debit entry represents the increase in the loan amount owed to the lender. Simultaneously, a credit entry is made to the liability account, reflecting the increase in the company's obligations or debts. This credit entry acknowledges the fact that the company now has a liability to repay the borrowed amount in the future.
In summary, the loan account is debited to record the increase in the loan balance, and the liability account is credited to reflect the increase in the company's overall liabilities.
learn more about accounting here:
https://brainly.com/question/33123397
#SPJ11
Identify and discuss the principles of assessment. Provide
examples to illustrate your answer (20 Marks)
The principles of assessment include validity, reliability, practicality, fairness, and flexibility.
Validity:This means that the assessment method must be relevant and cover the course material, assessing what it is supposed to assess. The evaluation approach should be designed to test the specified learning outcomes, not anything else.
Reliability:An assessment is considered reliable if it can yield reliable and reproducible results when used again and again to evaluate the same knowledge or skill. To enhance reliability, the assessment should be designed to prevent bias, have clear marking criteria, and use a suitable method for marking.
Practicality:Practicality refers to the convenience and efficiency of the assessment. Assessments should be convenient to use, should not overburden the students, and should not take an excessive amount of time.Fairness:Fairness refers to treating all students equally and not being biased towards any student. The assessment should be equal for all students, regardless of gender, race, or religion. Assessments should be unbiased and should not discriminate based on individual student characteristics.
Flexibility:Flexibility refers to the ability to adapt to the individual needs and learning styles of students. The assessment should be adjustable to the individual learning requirements of the student and should take into account the variety of student styles.
Examples of these principles of assessment include using valid and reliable tests to assess knowledge or skills, designing practical and manageable assessment tasks, marking with clear criteria, treating students fairly and equally, and allowing flexibility in assessment approaches to meet the needs of all students.
To know more about Reliability, visit:
https://brainly.com/question/29462744
#SPJ11
Read the Case "McDonald’s – The Coffee Spill Heard ‘Round the World." In your opinion, should the fast food industry bear any responsibility in this scenario? Explain why? Find another legal case or news article related to food safety, nutrition or another food-related topic. With regard to this case or article, what roles should the restaurant industry, trial attorneys, government policymakers & regulators as well as individual consumers play in a solution?
McDonald's - The Coffee Spill Heard 'Round the World: Should the Fast Food Industry Bear Any Responsibility?
Yes, the fast food industry should bear some responsibility in the McDonald's coffee spill scenario. While individuals should exercise caution when handling hot beverages, the fast food industry has a duty to ensure customer safety. This includes serving beverages at a reasonable temperature to minimize the risk of severe burns.
In the famous case of "McDonald's - The Coffee Spill Heard 'Round the World," Stella Liebeck sued McDonald's after suffering third-degree burns from spilled hot coffee. The temperature of the coffee was determined to be excessively hot, well above what a reasonable person would expect. McDonald's had received previous complaints about the high temperature of their coffee but did not take adequate measures to address the issue.
As a business, the fast food industry has a responsibility to provide products that are reasonably safe for consumption. In this case, serving coffee at an excessively high temperature created an unnecessary risk to consumers. While individuals should handle hot beverages carefully, it is reasonable to expect that a fast food restaurant would serve coffee at a temperature that minimizes the risk of severe burns.
In conclusion, the fast food industry should bear some responsibility in the McDonald's coffee spill scenario. They have a duty to ensure customer safety by serving beverages at a reasonable temperature. While individuals should exercise caution, the industry should take appropriate measures to minimize the risk of harm. This case highlights the importance of product safety and the need for businesses to prioritize consumer well-being.
Regarding other legal cases or news articles related to food safety or nutrition, the restaurant industry should focus on implementing strict quality control measures and maintaining transparency in their operations. Trial attorneys play a crucial role in holding businesses accountable for negligence or wrongdoing. Government policymakers and regulators should enforce robust food safety regulations, conduct regular inspections, and set clear standards for the industry. Individual consumers should be informed and exercise their rights by reporting any safety concerns and making informed choices about the products they consume. Collaboration among these stakeholders is essential to ensure a safer and healthier food industry.
To know more about Food Industry , visit;
https://brainly.com/question/15378284
#SPJ11
An engineer is tasked to design a feasible conveyor system from several options available. A closed loop overhead conveyor is tasked with delivering parts from one load station to one unload station. The specified flow rate of parts that must be delivered between the two stations is 600 parts per hour. Forward and return loops will each be 90 m long. The conveyor has carriers. Conveyor speed =0.5 m/s. In systems 1 to 4 , the carriers can hold one, two, three or four ( n p
=1,2,3 or 4) parts, and the time, in seconds, to load and unload parts at the respective stations, T L
=9+3n p
. Determine which of the four systems are feasible, and if so, the number of carriers and center-to-center spacing between carriers that will achieve the specified flow rate
None of the four systems are feasible to achieve the specified flow rate of 600 parts per hour. Adjustments would need to be made to the system parameters, such as carrier capacity, conveyor speed, or cycle time, in order to meet the required flow rate.
To determine which of the four conveyor systems are feasible and meet the specified flow rate of 600 parts per hour, we need to calculate the cycle time for each system and check if it is within the given time constraints. The cycle time is the time required for a carrier to complete one loop.
First, we calculate the cycle time for each system:
Cycle time (Tc) = Time to load/unload parts (TL) + Time to complete one loop (Tloop)
For all systems, the time to load/unload parts is given by TL = 9 + 3np, where np is the number of parts a carrier can hold.
System 1:
TL = 9 + 3(1) = 12 seconds
System 2:
TL = 9 + 3(2) = 15 seconds
System 3:
TL = 9 + 3(3) = 18 seconds
System 4:
TL = 9 + 3(4) = 21 seconds
The time to complete one loop (Tloop) can be calculated using the formula:
Tloop = Length of the loop / Conveyor speed
Since both the forward and return loops are 90 meters long, Tloop = 90 m / (0.5 m/s) = 180 seconds for all systems.
Now we can calculate the cycle time for each system:
System 1: Tc = 12 seconds + 180 seconds = 192 seconds
System 2: Tc = 15 seconds + 180 seconds = 195 seconds
System 3: Tc = 18 seconds + 180 seconds = 198 seconds
System 4: Tc = 21 seconds + 180 seconds = 201 seconds
Next, we determine the number of carriers needed to achieve the specified flow rate of 600 parts per hour. Since the flow rate is given in parts per hour, we need to convert it to parts per second:
Flow rate = 600 parts per hour = 600 / 3600 parts per second = 0.167 parts per second
Finally, we calculate the number of carriers required:
Number of carriers = Flow rate / (Parts per carrier × Cycle time)
Let's calculate the number of carriers for each system:
System 1: Number of carriers = 0.167 parts per second / (1 part per carrier × 192 seconds) = 0.000868 carriers (not feasible)
System 2: Number of carriers = 0.167 parts per second / (2 parts per carrier × 195 seconds) = 0.000428 carriers (not feasible)
System 3: Number of carriers = 0.167 parts per second / (3 parts per carrier × 198 seconds) = 0.000282 carriers (not feasible)
System 4: Number of carriers = 0.167 parts per second / (4 parts per carrier × 201 seconds) = 0.000207 carriers (not feasible)
Based on the calculations, none of the four systems are feasible to achieve the specified flow rate of 600 parts per hour. Adjustments would need to be made to the system parameters, such as carrier capacity, conveyor speed, or cycle time, in order to meet the required flow rate.
Learn more about parameters here
https://brainly.com/question/29673432
#SPJ11
You work in a mining company as supply chain analyst, your boss got higher pressure from the
director of board to identify the issues in supply chain (see below summary), it is urgent to get this
solved as soon as possible. He requested you to collect the information and provide him the
better solution. (70 points)
Your company has 3 locations, you found out that accounting paid all invoices from
suppliers who claimed to have supplied a remote location even when no confirmation of
orders, deliveries, or receipts was available. This occurred in about one-third of all
invoices. The accountant explained: "Getting suppliers to provide odd requirements in a
hurry and to get bush pilots to fly them in is a constant hassle. The last thing we want to
do is lose the goodwill of these suppliers because we don't have our records.
Communication between actual sites and suppliers occurred in two main ways. Since site
leaders were in regular contact with head office personnel, they frequently asked the
head office contacts to place specific orders for them. In addition, it was common for
remote site personnel to contact suppliers directly and place orders.
The interesting thing you discovered 20 instances of multiple deliveries of the same item
within days to the same site from different suppliers and 10 instances of multiple
deliveries of the same item from the same supplier within a few days. There were 11
instances where the airfreight bill was at least 10 times higher than the value of the item
transported.
Question: Consider the current processes and operating environment, identify the main issues or
concerns from a supply (purchasing) perspective? what would be the steps you would take in your
upcoming meeting with your boss. What recommendation you will apply to the issue for short-
and long-term objectives.
1. The main issues or concerns from a supply chain (purchasing) perspective are:
1) Paying invoices without confirmation of orders, deliveries, or receipts,
2) Communication issues between actual sites and suppliers, and
3) Multiple deliveries of the same item within days to the same site from different suppliers, multiple deliveries of the same item from the same supplier within a few days, and high airfreight bills.
2. In the upcoming meeting with your boss, the following steps should be taken:
1. Present the data collected from the analysis of the supply chain, which includes the issues or concerns identified from a purchasing perspective.
2. Discuss the short-term and long-term objectives to be achieved for resolving these issues.
3. Provide possible recommendations to address these issues.
3. The following recommendations could be applied for short- and long-term objectives:
Short-term objectives:
1. Implement a system of verifying and reconciling invoices with purchase orders, deliveries, and receipts before payment is made.
2. Establish a system of communication between the actual sites and suppliers that involves site personnel placing orders directly with suppliers and providing relevant documentation to account for processing.
Long-term objectives:
1. Develop a central procurement system for the mining company to standardize the procurement process across all sites.
2. Provide training to all site personnel on the procurement process and procurement policies to ensure compliance.
3. Implement a vendor management program to evaluate the performance of suppliers and manage supplier relationships.
4. Establish a system of auditing invoices, deliveries, and receipts to ensure compliance with procurement policies and procedures.
The above recommendations will help the company to improve its supply chain operations and ensure that the issues and concerns identified are resolved for long-term success.
To know more about supply chain refer here:
https://brainly.com/question/28168252#
#SPJ11
Canada’s Real GDP is measured at $1.85 trillion. The current unemployment rate is 8.3% and the natural rate of unemployment is typically 5.5%. For Canada, Okun’s Law is typically a ratio of 1% unemployment to 2.5% GDP.
a) Determine the GDP gap from our current Real GDP to our Potential GDP at Full Employment. Show work.
b) What is the value of the Real GDP that this country could produce before suffering from rapid inflation (Potential GDP at Full Employment)?
c) The typical Canadian consumes an average of $93 per $100 income. Given this data regarding Canadian’s spending and savings habits, how much money should the federal government spend to boost the AD to full employment level?
a) The GDP gap from the current Real GDP to Potential GDP at Full Employment is $100 billion. b) Real GDP that this country could produce before suffering from rapid inflation is $2.01 trillion. c) will lead to an increase in the AD of $1.43 trillion ($100 billion x 14.29).
a) GDP Gap is a measure of how much potential output a nation is currently not producing. It is determined by calculating the difference between actual and potential GDP. The formula for calculating the GDP gap is:GDP gap = potential GDP - actual GDPThe current unemployment rate is 8.3% and the natural rate of unemployment is typically 5.5%. Thus, Okun's law states that for Canada, 1% unemployment corresponds to 2.5% GDP.Given the Real GDP = $1.85 trillion and natural rate of unemployment = 5.5%, the potential output of the economy (potential GDP) can be calculated as follows:Potential GDP = Real GDP / (1 - Natural rate of unemployment)Potential GDP = 1.85 trillion / (1 - 5.5%) = 1.95 trillionSo, GDP gap = Potential GDP - Actual GDP= 1.95 - 1.85= $100 billion. Therefore, the GDP gap from the current Real GDP to Potential GDP at Full Employment is $100 billion.
b) The output of the economy that can be produced before suffering from rapid inflation is the potential GDP at full employment. The output of an economy is determined by the availability of factors of production like land, labor, capital, and technology. The maximum output that an economy can produce without causing inflation is referred to as the potential GDP at full employment.Since Okun's law states that 1% unemployment corresponds to 2.5% GDP, the full employment level of output is achieved at the natural rate of unemployment (5.5%).
Thus, potential GDP at full employment is calculated as:Potential GDP at Full Employment = Real GDP / (1 - Okun's Coefficient * (Actual Unemployment Rate - Natural Unemployment Rate))Potential GDP at Full Employment = $1.85 trillion / (1 - 2.5% * (8.3% - 5.5%))= $2.01 trillionTherefore, the value of Real GDP that this country could produce before suffering from rapid inflation is $2.01 trillion.
c) Given the typical Canadian consumption pattern, the multiplier effect is estimated to be 1/ (1-MPC), where MPC is the marginal propensity to consume. Since the average Canadian consumes $93 per $100 income, then MPC = 0.93.
If the federal government wants to increase the AD to full employment level, then the spending multiplier can be used to determine the government spending required to achieve the desired output level.
The formula for the spending multiplier is given by:Multiplier = 1 / (1 - MPC)Multiplier = 1 / (1 - 0.93) = 14.29So, to boost AD to full employment level, the government must spend $100 billion, which is the GDP gap calculated in part (a). The spending multiplier will ensure that the additional government spending of $100 billion will lead to an increase in the AD of $1.43 trillion ($100 billion x 14.29).
Learn more about gdp here:
https://brainly.com/question/31197617
#SPJ11
A friend asks to borrow $52 from you and in return will pay you $52 in one year. If your bank is offering a 5.9% interest rate on deposits and loans: A. How much would you have in one year if you deposited the $49 instead? B. How much money could you borrow today if you pay the bank $52 in one year? C. Should you loan the money to your friend or deposit it in the bank?
Friend has asked to borrow 52, and in return, they will pay you 52 in one year. In the meantime, your bank is offering a 5.9 percent interest rate on deposits and loans. The following are the solutions:A.
Formula for calculating interest:
Interest = (Principal * Rate * Time)/100Interest
=(49 * 5.9 * 1)/100Interest 2.891The interest earned on the deposited 49 is 2.891.Thus, in one year, you would have 49 + 2.891
= 51.891.B.The formula for calculating present value.
Present Value = Future Value / (1 + r)nWhere,
Future Value 52r Interest Rate 5.9% 0.059n Number of periods 1Present Value = 52 / (1 + 0.059)¹Present Value 49.052Thus, you could borrow 49.052 from the bank today if you pay 52 in one year.C. As per the calculations above, you would only gain 0.891 in interest by lending the 52 to your friend for one year.
To more about interest visit:
https://brainly.com/question/26457073
#SPJ11
According to the Leadership Grid (The Managerial Grid),opportunism describes leaders who use any combination of the basic five styles (of the Leadership Grid) for the purpose of personal advancement. O True O False
True. According to the Leadership Grid, opportunism refers to leaders who use any combination of the basic five styles (Concern for Production, Concern for People, Impoverished Style, Authority-Compliance Style, and Team Style) solely for their personal gain or advancement.
The Leadership Grid, also known as the Managerial Grid, is a model that assesses leadership styles based on two dimensions: concern for production and concern for people. It categorizes leadership styles into five main categories:
1. Concern for Production (Task-Oriented): Leaders with a high concern for production focus primarily on achieving tasks, meeting goals, and maximizing efficiency. They prioritize getting the job done efficiently, often at the expense of interpersonal relationships.
2. Concern for People (Relationship-Oriented): Leaders with a high concern for people prioritize the well-being, satisfaction, and development of their team members. They focus on building strong relationships, promoting teamwork, and ensuring a supportive work environment.
3. Impoverished Style (Low Concern for Production and People): Leaders with a low concern for production and people exhibit minimal effort and involvement in both task accomplishment and team relationships. They may adopt a "do the minimum required" approach, resulting in a lack of direction and motivation.
4. Authority-Compliance Style (High Concern for Production, Low Concern for People): Leaders with an authority-compliance style emphasize efficiency, productivity, and meeting targets. They tend to be task-oriented and enforce strict rules and procedures, with little consideration for individual needs or opinions.
5. Team Style (High Concern for Production and People): Leaders with a team style strive to achieve high levels of both production and team member satisfaction. They emphasize collaboration, participation, and involvement, seeking to create a positive work environment where productivity and morale are both high.
Learn more about Leadership Grid here:
https://brainly.com/question/32357760
#SPJ11
Provide three examples of prohibited grounds for discrimination in employment in Canadian jurisdictions
Provide one example of where the employer can legally discriminate based on Bona Fide Occupational Requirements (BFOR)
Prohibited grounds for employment discrimination in Canadian jurisdictions include race/ethnicity, gender, and disability.
In Canadian jurisdictions, there are several prohibited grounds for discrimination in employment.
The 3-examples are :
(i) Race or Ethnicity: Discrimination based on a person's race, ethnicity, or ethnic origin is strictly prohibited in employment. Employers cannot make decisions regarding hiring, promotion, termination, or any other employment-related matter based on an individual's racial or ethnic background.
(ii) Gender : Discrimination based on gender , including discrimination against women, men, or individuals who identify as non-binary, is prohibited.
(iii) Disability: Discrimination against individuals with disabilities is strictly prohibited in employment.
These examples highlight a few of the prohibited grounds for discrimination in employment in Canadian jurisdictions.
Learn more about Employment here
https://brainly.com/question/32530425
#SPJ4
The given question is incomplete, the complete question is
Provide three examples of prohibited grounds for discrimination in employment in Canadian jurisdictions.
Hungry Whale Electronics Company is a mature firm that has a stable flow of business. The following data was taken from its financial statements last year: Hungry Whale's CFO is interested in determining the length of time funds are tied up in working capital. Use the information in the preceding table to complete the following table. (Note: Use 365 days as the length of a year in all calculations, and round all values to two decimal places.) Both the inventory conversion period and payables deferral period use the average daily COGS in their denominators, whereas the average collection period uses average daily sales in its denominator. Why do these measures use different inputs? Current assets should be divided by sales, but current liabilities should be divided by the COGS. Inventory and accounts payable are carried at cost on the balance sheet, whereas accounts receivable are the which goods are sold. Is there generally a positive or negative relationship between net working capital and the cash conversion cycle? (In other words, if a firm has a high level of net working capital, is it likely to have a high or low cash conversion cycle?) There is a positive relationship between net working capital and the cash conversion cycle. There is a negative relationship between net working capital and the cash conversion cycle. What are the four key factors in a firm's credit policy? Credit terms, discounts, credit standards, and collection policy Credit period, discounts, credit standards, and collection policy If the credit terms as published by a firm were 2/15, net 60 , this means the firm will: allow a 15% discount if payment is received within 2 days of the purchase, and if the discount is not taken the full amount is 60 days. allow a 2% discount if payment is received within 15 days of the purchase, and if the discount is not taken the full amount is 60 days. The management at Hungry Whale Electronics Company wants to continue its internal discussions related to its cash manageme of the finance team members presents the following case to his cohorts: Case in Discussion Hungry Whale Electronics Company's management plans to finance its operations with bank loans that will be repaid as soon as is available. The company's management expects that it will take 50 days to manufacture and sell its products and 40 days to receive payment from its customers. Hungry Whale's CFO has told the rest of the management team that they should expect the length of the Which of the following responses to the CFO's statement is most accurate? The CFO's approximation of the length of the bank loans should be accurate, because it will take 90 days for the company to manufacture, sell, and collect cash for its goods. All these things must occur for the company to be able to repay its loans from the bank. The CFO is not taking into account the amount of time the company has to pay its suppliers. Generally, there is a certain length of time between the purchase of materials and labor and the payment of cash for them. The CFO can reduce the estimated length of the bank loan by this amount of time. Setting and implementing a credit policy is important for three main reasons: It has a minor effect on sales, it influences the amount of funds tied up in receivables, and it affects bad debt losses. It has a major effect on sales, it influences the amount of funds tied up in receivables, and it affects bad debt losses.
The inventory conversion period and payables deferral period use the average daily COGS in their denominators, whereas the average collection period uses average daily sales in its denominator because inventory and accounts payable are carried at cost on the balance sheet, whereas accounts receivable are the goods that are sold. There is a positive relationship between net working capital and the cash conversion cycle. If the credit terms as published by a firm were 2/15, net 60, it means the firm will allow a 2% discount if payment is received within 15 days of the purchase, and if the discount is not taken the full amount is 60 days. The CFO is not taking into account the amount of time the company has to pay its suppliers. Generally, there is a certain length of time between the purchase of materials and labor and the payment of cash for them.
Inventory conversion period and payables deferral period use the average daily COGS in their denominators, whereas the average collection period uses average daily sales in its denominator because inventory and accounts payable are carried at cost on the balance sheet, whereas accounts receivable are the goods that are sold.Net working capital (NWC) is the difference between a company's current assets and current liabilities. The cash conversion cycle (CCC) measures how long a firm takes to convert its investments in inventory and other resources into cash flow. There is a positive relationship between net working capital and the cash conversion cycle.If the credit terms as published by a firm were 2/15, net 60, it means the firm will allow a 2% discount if payment is received within 15 days of the purchase, and if the discount is not taken the full amount is 60 days.The CFO is not taking into account the amount of time the company has to pay its suppliers. Generally, there is a certain length of time between the purchase of materials and labor and the payment of cash for them.
To know more about inventory , visit:
https://brainly.com/question/31146932
#SPJ11
Ethical relativism suggests that what is ethical in one culture is not necessarily the same as in another culture. True False
True. Ethical relativism is the belief that ethical principles and judgments are culturally dependent and vary across different societies or cultures. It suggests that what is considered ethical in one culture may not be the same in another culture.
Ethical relativism is a philosophical perspective that asserts that ethical principles and moral judgments are relative to the individual, culture, or society in which they arise. According to ethical relativism, there is no universal or objective standard of ethics that applies to all people and cultures.
There are different forms of ethical relativism, including cultural relativism and individual relativism. Cultural relativism holds that ethical beliefs and practices are determined by the cultural norms and values of a particular society or group. It suggests that what is considered morally right or wrong can vary from one culture to another.
Individual relativism, on the other hand, argues that ethical judgments are subjective and vary from person to person. It suggests that each individual has their own moral framework, and what is right or wrong is determined by personal beliefs and perspectives.
Learn more about Ethical relativism here
https://brainly.com/question/14546755
#SPJ11
True. Ethical relativism is the belief that ethical principles and judgments are culturally dependent and vary across different societies or cultures. It suggests that what is considered ethical in one culture may not be the same in another culture.
Ethical relativism is a philosophical perspective that asserts that ethical principles and moral judgments are relative to the individual, culture, or society in which they arise. According to ethical relativism, there is no universal or objective standard of ethics that applies to all people and cultures.
There are different forms of ethical relativism, including cultural relativism and individual relativism. Cultural relativism holds that ethical beliefs and practices are determined by the cultural norms and values of a particular society or group. It suggests that what is considered morally right or wrong can vary from one culture to another.
Individual relativism, on the other hand, argues that ethical judgments are subjective and vary from person to person. It suggests that each individual has their own moral framework, and what is right or wrong is determined by personal beliefs and perspectives.
Learn more about Ethical relativism here
brainly.com/question/14546755
#SPJ11
Souhem Fried Chicken bought equipment on January 2, 2024, for $21.000 The equipment was expected to remain in service for four years and to operate for 6,000 hours. At the end of the equipments useful life, Souther estimates that its residual value will be $3.000 The equipment operated for 600 hours the first year, 1,800 hours the second year, 2.400 hours the third year, and 1,200 hours the fourth year Read the INDE Requirement 1. Prepare a schedule of depreciation expense accumulated depreciation, and book value per year for the equipment under the three depreciation methods straight line units-of-production and double-dedining balance Show your computations Note Three depreciation schedules must be prepared Begin by preparing a depreciation schedule using the straight line method Straight Line Depreciation Schedule Date 122024 12-31-2014 12-31-2025 12-31-212 333 Asset Cost Depreciation for the Year Usebil Life Depreciable Cost Depreciation Accumulated Book Expense Depreciation Valur Before calculating the units of production depreciation schedule, calculate the depreciation expersa per unit Select the formula, then enter the amounts and calculate the depreciation expense per unit Depreciation per unit Prepare a depreciation schedule using the units of production method Units-of-Production Depreciation Schedule Date 1-2-2024 12-31-2024 12-31-2025 12-31-2026 12-31-2027 Depreciation for the Year Number of Units Asset Depreciation Cost Per Unit 16 Depreciation Accumulated Book Expense Depreciation Value Double-Declining-Balance Depreciation Schedule Date 1-2-2024 12-31-2024 12-31-2025 12-31-2026 12-31-2027 Asset Cost The Book Value Depreciation for the Year DDB Rate Depreciation Accumulated Book Expense Depreciation Value Requirement 2. Which method tracks the wear and tear on the equipment most closely? method tracks wear and tear most closely
To calculate the depreciation expense, accumulated depreciation, and book value per year for the equipment under three depreciation methods (straight line, units-of-production, and double-declining balance), we will use the given information.
Straight Line Depreciation Method:
The formula to calculate straight-line depreciation expense is:
Depreciation Expense = (Asset Cost - Residual Value) / Useful Life
Date | Asset Cost | Depreciation Expense | Accumulated Depreciation | Book Value
01-02-2024 | $21,000 | - | - | $21,000
12-31-2024 | - | $4,500 | $4,500 | $16,500
12-31-2025 | - | $4,500 | $9,000 | $12,000
12-31-2026 | - | $4,500 | $13,500 | $7,500
12-31-2027 | - | $4,500 | $18,000 | $3,000
Units-of-Production Depreciation Method:
To calculate the depreciation per unit, divide the depreciable cost by the total estimated production units.
Depreciation per unit = (Asset Cost - Residual Value) / Total Estimated Production Units
Depreciation Expense = Depreciation per unit * Actual Production Units
Date | Asset Cost | Depreciation Expense | Accumulated Depreciation | Book Value
01-02-2024 | $21,000 | - | - | $21,000
12-31-2024 | - | $6,000 | $6,000 | $15,000
12-31-2025 | - | $12,000 | $18,000 | $3,000
12-31-2026 | - | $8,000 | $26,000 | -$5,000 (fully depreciated)
12-31-2027 | - | - | $26,000 | -$5,000 (fully depreciated)
Double-Declining Balance Depreciation Method:
The double-declining balance depreciation rate is twice the straight line depreciation rate.
Depreciation Expense = Book Value * DDB Rate
DDB Rate = 1 / Useful Life
Date | Asset Cost | Depreciation Expense | Accumulated Depreciation | Book Value
01-02-2024 | $21,000 | - | - | $21,000
12-31-2024 | - | $10,500 | $10,500 | $10,500
12-31-2025 | - | $5,250 | $15,750 | $5,250
12-31-2026 | - | $2,625 | $18,375 | $2,625
12-31-2027 | - | $2,625 | $21,000 | $0 (fully depreciated)
Requirement 2. The units-of-production depreciation method tracks
To learn more about Depreciation, visit here
https://brainly.com/question/30531944
#SPJ11
the balances that appear on the post-closing trial balance will match the
The balances that appear on the post-closing trial balance will match the permanent account balances.A post-closing trial balance is a listing of all accounts that have a balance after the company has completed its closing entries.
The purpose of this trial balance is to verify that the total debits equal the total credits and that all permanent accounts have non-zero balances. The post-closing trial balance may be generated after the closing entries have been completed and the adjusted trial balance has been prepared.The balances that appear on the post-closing trial balance will match the permanent account balances, as temporary accounts will have been closed out. The accounts that will appear on a post-closing trial balance are assets, liabilities, and equity accounts. They are known as permanent accounts because their balances are carried over to the next accounting period.
know more about post-closing,here:
https://brainly.com/question/12163236
#SPJ11
Alternate outputs from one day's labor input:
India: 1600 bushels of wheat or 400 yards of textiles. Mexico: 250 bushels of wheat or 1250 yards of textiles.
a. Mexico should specialize in producing wheat because it has absolute advantage in producing wheat
b. India should produce both wheat and textiles because it has comparative advantage in producing both products.
c. India should specialize in producing textiles because it has absolute advantage in producing textiles
d. Mexico should specialize in producing textiles because it has comparative advantage in producing textiles
India should specialize in producing textiles while Mexico should specialize in producing wheat, as this would lead to an increase in both countries' total output. Therefore, the correct option is B: India should produce both wheat and textiles because it has comparative advantage in producing both products.
According to the information provided, India can produce 1600 bushels of wheat or 400 yards of textiles, while Mexico can produce 250 bushels of wheat or 1250 yards of textiles.
The concept of comparative advantage states that a country should specialize in producing goods that it can produce at a lower opportunity cost than other countries.
The opportunity cost is the value of the next best alternative given up in order to produce a particular good or service.
Based on this, India has a comparative advantage in producing textiles because it can produce 4 yards of textiles for every 1 bushel of wheat given up (1600 bushels of wheat/400 yards of textiles).
On the other hand, Mexico has a comparative advantage in producing wheat because it can produce 5 bushels of wheat for every yard of textiles given up (250 bushels of wheat/1250 yards of textiles).
Therefore, India should specialize in producing textiles while Mexico should specialize in producing wheat, as this would lead to an increase in both countries' total output.
Therefore, the correct answer is option B: India should produce both wheat and textiles because it has comparative advantage in producing both products.
For more such questions on producing textiles
https://brainly.com/question/30822208
#SPJ8
a) An increase in the minimum wage from RM1200 to RM1500 will have a positive impact on the cost of living of Malaysians. Yes or No. Explain your point of view.
b) The implementation of the minimum wage has a significant impact on the labor market in Malaysia. By using the appropriate diagram show and explain your answer based on the Classical viewpoint.
c) Show and explain the effect of sending foreign labor to the country of origin on the domestic labor market.
d) In the Classical analysis the aggregate output level is not directly sensitive to the general price level. This is because of the flexibility in money wage. Based on the analysis of 4 quadrants, show and explain how this exists.
Increase in minimum wage and its impact on cost of living Minimum wage is the lowest amount of compensation that employees must receive from their employers.
The implementation of the minimum wage policy in Malaysia has a significant impact on the cost of living. An increase in minimum wage from RM1200 to RM1500 will have a positive impact on the cost of living of Malaysians. The increase in minimum wage will benefit workers and provide them with more money to spend on their basic needs.
Additionally, the minimum wage increase may provide businesses with a competitive edge by attracting more employees. The higher minimum wage may help firms attract more skilled and talented employees to their workforce which, in turn, may help increase productivity.
To know more about wage visit:
https://brainly.com/question/10062041
#SPJ11
If a firm is a monopsonist, then it faces
a. a downward sloping demand curve for its product, and its marginal revenue curve will lie below its demand curve.
b. a horizontal marginal factor cost curve.
c. an upward sloping factor supply curve, and its marginal factor cost curve will lie above the factor supply curve.
d. an upward sloping factor supply curve, and its marginal factor cost curve will coincide with the factor supply curve.
e. an upward-sloping factor supply curve, and its marginal factor cost curve will lie below the factor supply curve.
The correct answer is:
c. an upward sloping factor supply curve, and its marginal factor cost curve will lie above the factor supply curve.
Explanation:
A monopsonist is a single buyer or employer in a market where there are multiple sellers or workers. As a monopsonist, the firm has market power and can influence the price or wage it pays for the factors of production (such as labor).
In the case of a monopsonist, the factor supply curve (the supply of the factor of production) is upward sloping. This means that as the firm increases the quantity of the factor it wants to hire, the price or wage it needs to pay for each unit of the factor also increases. This is because as the firm hires more units of the factor, it faces diminishing marginal returns, and it must offer higher wages or prices to attract additional units.
The marginal factor cost curve represents the additional cost incurred by the firm to hire an additional unit of the factor. In the case of a monopsonist, the marginal factor cost curve lies above the factor supply curve. This is because the firm must pay a higher price or wage to attract additional units of the factor, resulting in a higher marginal cost.
Therefore, option c is the correct statement that describes the characteristics of a firm operating as a monopsonist.
Learn more about marginal here
https://brainly.com/question/30165613
#SPJ11
Sunland Enterprises purchased equipment on March 15, 2021, for $68,730. The company also paid the following amounts: $480 for freight charges; $184 for insurance while the equipment was in transit; $1,835 for a one-year insurance policy; $2,067 to train employees to use the new equipment; and $2,526 for testing and installation. The company began to use the equipment on April 1. Sunland has estimated the equipment will have a 10-year useful life with no residual value. It expects to consume the equipment's future economic benefits evenly over the useful life. The company has a December 31 year end. (a) Your answer is incorrect. Calculate the cost of the equipment.
The cost of the equipment can be calculated by adding all the relevant expenses incurred for the purchase and preparation of the equipment. In this case, the cost of the equipment includes the purchase price, freight charges, insurance during transit, insurance for one year, employee training costs, and testing/installation expenses.
To calculate the cost of the equipment:
Cost of equipment = Purchase price + Freight charges + Insurance during transit + One-year insurance policy + Training costs + Testing/installation expenses
In this case, the cost of the equipment is:
Cost of equipment = $68,730 + $480 + $184 + $1,835 + $2,067 + $2,526
The total cost of the equipment can be determined by adding up all the amounts.
to learn more about expenses click here:
brainly.com/question/29617511
#SPJ11
What is the value today of receiving $1,908.00 per year forever? Assume the first payment is made next year and the discount rate is 10.00%.
What is the value today of receiving $2,974.00 per year forever? Assume the first payment is made 10.00 years from today and the discount rate is 5.00%.
Suppose you deposit $2,214.00 into an account today that earns 14.00%. In 13.00 years the account will be worth $________.
In 13.00 years, the Account will be worth = $16,406.14
To calculate the present value of receiving a fixed amount per year forever, we can use the formula for the present value of a perpetuity:
Present Value = Annual Payment / Discount Rate
1. For receiving $1,908.00 per year forever, with a discount rate of 10.00%:
Present Value = $1,908.00 / 0.10 = $19,080.00
Therefore, the value today of receiving $1,908.00 per year forever is $19,080.00.
2. For receiving $2,974.00 per year forever, with a discount rate of 5.00%:
Since the first payment is made 10.00 years from today, we need to discount the cash flows back to the present value.
Using the formula for the present value of a perpetuity, we divide the annual payment by the discount rate:
Present Value = Annual Payment / Discount Rate
Present Value = $2,974.00 / 0.05 = $59,480.00
Therefore, the value today of receiving $2,974.00 per year forever, with the first payment made 10.00 years from today, is $59,480.00.
3. If you deposit $2,214.00 into an account today that earns 14.00% and the account will be worth $________ in 13.00 years, we can use the formula for the future value of a present amount:
Future Value = Present Value × (1 + Interest Rate) ^ Time
Future Value = $2,214.00 × (1 + 0.14) ^ 13 = $16,406.14
Therefore, in 13.00 years, the account will be worth $16,406.14.
To learn more about Accounts, visit:
https://brainly.com/question/30977839
#SPJ11
How will you use collective intelligence, knowledge management,
and crowdsourcing to help you make business decisions? Explain in
detail
I will leverage collective intelligence, knowledge management, and crowdsourcing to make informed business decisions by tapping into the wisdom of the crowd, utilizing shared knowledge.
In today's fast-paced and complex business environment, harnessing collective intelligence, knowledge management, and crowdsourcing can provide valuable insights and support decision-making processes.
Collective intelligence refers to the ability to gather and utilize the knowledge, ideas, and expertise of a diverse group of individuals. By leveraging collective intelligence, I can tap into the collective wisdom of employees, customers, and external stakeholders to gather different perspectives and ideas.
This can be done through various channels such as brainstorming sessions, idea generation platforms, or online forums. By encouraging active participation and collaboration, I can foster a culture of innovation and gather a wide range of viewpoints that can enhance the quality of business decisions.
Knowledge management plays a crucial role in effective decision-making by facilitating the capture, organization, and sharing of information within an organization.
By implementing knowledge management systems and processes, I can ensure that valuable insights, lessons learned, and best practices are captured and made accessible to relevant stakeholders. This can enable more informed decision-making by leveraging the collective knowledge and experience of individuals within the organization.
Crowdsourcing involves outsourcing tasks, ideas, or problem-solving to a large group of people, typically through an online platform. By leveraging crowdsourcing, I can tap into the collective intelligence of a broader community outside the organization.
This can be particularly valuable when seeking innovative solutions, gathering market insights, or conducting market research. By engaging the crowd, I can benefit from diverse perspectives, expertise, and creativity, enabling more effective decision-making.
In summary, by utilizing collective intelligence, knowledge management, and crowdsourcing, I can harness the power of collaboration, shared knowledge, and external expertise to make well-informed business decisions.
Learn more about crowdsourcing
brainly.com/question/31439173
#SPJ11
Project L requires an initial outlay at t = 0 of $52,000, its expected cash inflows are $10,000 per year for 12 years, and its WACC is 10%. What is the project's payback? Round your answer to two decimal places.
__________ years
The project's payback is 5.20 years.
Given, Initial outlay (Po) = $52,000Cash inflows (C) = $10,000Period (n) = 12 years WACC = 10%To calculate the project's payback, we need to find the number of years it takes for the project's cash inflows to equal its initial outlay. The formula for payback period is: Payback period = Po/C Where, Po is the initial outlay, and C is the cash inflows. Substituting the values in the above formula, Payback period = $52,000/$10,000Payback period = 5.20 years Therefore, the project's payback is 5.20 years (rounded to two decimal places).
To know more about payback visit:
https://brainly.in/question/32104472
#SPJ11
(T/F) Online trading is the only valuable investment service available through the Internet.
False. Online trading is not the only valuable investment service available through the internet.
Other valuable investment services available through the internet include robo-advisors, peer-to-peer lending platforms, crowdfunding, real estate investment platforms, and so on.
Robo-advisors: A robo-advisor is an online investment management platform that offers investment advice based on algorithms and data.
Peer-to-peer lending platforms: These are online platforms that connect investors with borrowers directly, bypassing traditional financial institutions such as banks.
Crowdfunding: Crowdfunding is an online platform that enables entrepreneurs, startups, and businesses to raise capital from a large pool of investors.
Real estate investment platforms: These are online platforms that allow investors to invest in real estate properties, such as apartments, commercial buildings, and other types of properties.
So, the correct answer is False. Online trading is not the only valuable investment service available through the internet.
Learn more about robo-advisor here,
https://brainly.com/question/30378249
#SPJ11
Given the following information on foreign currency positions (all in $thousands) for Eastpac Bank.
Currency
Assets
Liabilities
FX Bought
FX Sold
Euro
300
170
320
Yen
60
20
100
220
What are Eastpac Bank's net exposure (in $thousands) in Japanese Yen and its exposure to the fluctuation in the AU$/Japanese Yen exchange rate?
a. 0, not exposed to the fluctuation in Japanese Yen exchange rate
b. +80, exposed to the appreciation in Japanese Yen
c. -80, exposed to the appreciation in Japanese Yen
d. -80, exposed to the depreciation in Japanese Yen
e. +80, exposed to the depreciation in Japanese Yen
To determine Eastpac Bank's net exposure in Japanese Yen and its exposure to the fluctuation in the AU$/Japanese Yen exchange rate, we need to calculate the net position in Japanese Yen and the amount of FX Bought and FX Sold in Japanese Yen.
Net Exposure in Japanese Yen:
Assets in Yen: 60
Liabilities in Yen: 20
Net Exposure = Assets - Liabilities
Net Exposure = 60 - 20 = 40
Exposure to the Fluctuation in AU$/Japanese Yen Exchange Rate:
FX Bought in Yen: 100
FX Sold in Yen: 220
Exposure = FX Bought - FX Sold
Exposure = 100 - 220 = -120
Since the exposure is negative (-120), it means that Eastpac Bank is exposed to the depreciation in Japanese Yen. However, the question asks specifically about the exposure to the fluctuation in the AU$/Japanese Yen exchange rate. To determine this, we need to consider the exposure in relation to the AU$.
The exposure to the fluctuation in the AU$/Japanese Yen exchange rate is determined by multiplying the exposure in Japanese Yen by the exchange rate. However, the exchange rate between AU$ and Japanese Yen is not provided in the given information. Without the exchange rate, we cannot accurately determine the exposure to the fluctuation in the AU$/Japanese Yen exchange rate.
Therefore, based on the information given, the correct answer is:
Option a. 0, not exposed to the fluctuation in the Japanese Yen exchange rate.Learn more about fluctuation here
https://brainly.com/question/28001860
#SPJ11
To determine Eastpac Bank's net exposure in Japanese Yen and its exposure to the fluctuation in the AU$/Japanese Yen exchange rate, we need to calculate the net position in Japanese Yen and the amount of FX Bought and FX Sold in Japanese Yen.
Net Exposure in Japanese Yen:
Assets in Yen: 60
Liabilities in Yen: 20
Net Exposure = Assets - Liabilities
Net Exposure = 60 - 20 = 40
Exposure to the Fluctuation in AU$/Japanese Yen Exchange Rate:
FX Bought in Yen: 100
FX Sold in Yen: 220
Exposure = FX Bought - FX Sold
Exposure = 100 - 220 = -120
Since the exposure is negative (-120), it means that Eastpac Bank is exposed to the depreciation in Japanese Yen. However, the question asks specifically about the exposure to the fluctuation in the AU$/Japanese Yen exchange rate. To determine this, we need to consider the exposure in relation to the AU$.
The exposure to the fluctuation in the AU$/Japanese Yen exchange rate is determined by multiplying the exposure in Japanese Yen by the exchange rate. However, the exchange rate between AU$ and Japanese Yen is not provided in the given information. Without the exchange rate, we cannot accurately determine the exposure to the fluctuation in the AU$/Japanese Yen exchange rate.
Therefore, based on the information given, the correct answer is:
Option a. 0, not exposed to the fluctuation in the Japanese Yen exchange rate.
Learn more about fluctuation here
brainly.com/question/28001860
#SPJ11
Why is it important to make the distinction between company required rate of retum (WACC) and project required rate of return when evaluating projects?
The distinction between a company's required rate of return (WACC) and a project's required rate of return is important when evaluating projects.
The company's required rate of return, also known as the weighted average cost of capital (WACC), represents the minimum return that the company needs to generate in order to satisfy its shareholders and creditors. It is a measure of the overall risk and cost of capital for the company as a whole. The WACC takes into account the cost of debt, equity, and other sources of financing, and reflects the average return expected by all investors. On the other hand, the project's required rate of return is specific to a particular investment or project. It takes into consideration the risk and return characteristics of that project alone. The project's required rate of return may differ from the company's WACC due to variations in risk, market conditions, and project-specific factors. By evaluating the project's required rate of return separately, decision-makers can assess its viability and compare it to the expected returns and risks associated with other investment options.
Learn more about weighted average cost of capital (WACC) here:
https://brainly.com/question/30746642
#SPJ11
Fill out the above calculations using the following information
Record the following adjusting entries in general journal form as of December 31, 2021:
Supplies on hand at the end of the year: $5,016.
Equipment shown on the 12/1 TB was purchased on 1/1/17, has a 7-year life, no salvage value and company uses double-declining balance method for its depreciation.
Don’t forget to depreciate the new equipment, which is also depreciated using the DDB method!
Included in the truck balance is a fully depreciated truck for $6,500 and a new truck valued at $50,000 that was purchased on 1/1/17. The new truck has an 8-year life, no salvage value and the company uses the sum-of-the-years digits for its depreciation method on this asset.
The building is depreciated under the straight-line method over 39 years and was placed in service on July 1, 2018.
The machinery was purchased on December 1, 2020, has a 5-year useful life, salvage value of $4,000, and is being depreciated under the straight-line method.
The patent was purchased on 1/1/2013 for $100,000 and its useful life is 20 years.
Included in the Prepaid Insurance Account balance at 12/1 is a $75,000, 12-month insurance policy that was purchased on August 1, 2021.
Also included in the 12/1 trial balance (and the 12/31 TB) was an insurance policy that expired on 12/31/21.
Declared dividends of $350,000 on December 31.
The fair market value of the short-term investments is $12,500.
The total fair value of the Available for Sale Securities is $489,000.
2% of Accounts Receivable is estimated to be uncollectible. Company uses the allowance method for estimating its uncollectible accounts.
Accrued salaries of $145,000 and accrued payroll taxes of 6.2%.
Had issued $2,500,000 of 4%, 10-year bond, dated 1/1/18 for $2,305,133 when the market rate was 5%. Interest is paid on June 30 and January 1 using the effective interest rate method. The June payment is included in the Dec. 1 TB. Extra credit of 5 points if a complete amortization table (all 10 years) is included. Partial extra credit may be awarded.
One month has passed since the issuance of restricted stock.
Interest on 30 days of short-term note payable, dated 12/2/21 should be accrued. (Assume 360 days in a year for calculation)
Income tax rate is 21%
Additional Information:
Panther Builders, Inc. was founded in Grand Rapids, Michigan in 2013 by Davenport University entrepreneurs. It is a private company with more than 40 employees. Its operations include providing household renovation services to homeowners and small businesses.
During 2021, the following additional transactions occurred: (Hint: these are already included in 12/1/21 TB, but may be needed for the Statement of Cash Flows and calculation of Weighted Average shares of Common Stock )
Issued 35,000 shares of common stock, $1 par, for $700,000 on June 30, 2021.
Some equipment was sold (original cost $10,000, book value $3,000) for $6,500 (do not consider in your #2 AJE). Confirm with the 12/1 Trial Balance!
All amortization and depreciation is recorded once a year on December 31.
Market price per share of stock at 12/31/2021 was $18.75.
The adjusting entries to be recorded in the general journal as of December 31, 2021, include depreciation of equipment, trucks, building, and machinery, allowance for uncollectible accounts, accrued salaries and payroll taxes, amortization of the patent, recognition of expired insurance policy, declaration of dividends, accrual of interest on short-term note payable, and calculation of income tax.
What adjusting entries need to be recorded on December 31, 2021?The adjusting entries for December 31, 2021, involve various aspects of Panther Builders, Inc.'s financial activities.
Firstly, depreciation needs to be recorded for equipment, trucks, building, and machinery using different methods such as double-declining balance, sum-of-the-years digits, and straight-line.
Secondly, an allowance for uncollectible accounts needs to be estimated based on 2% of accounts receivable.
Thirdly, accrued salaries and payroll taxes should be recognized. The amortization of the patent purchased in 2013 is also required. Additionally, the recognition of an expired insurance policy, declaration of dividends, and accrual of interest on a short-term note payable are necessary.
Lastly, income tax calculations at a rate of 21% need to be considered.
Learn more about adjusting entries.
brainly.com/question/32942564
#SPJ11
