Answer:
neutral, acidic, basic
Explanation:
Know the acidity rules. Sorry I just saw this!
- Hope that helps! Please let me know if you need further explanation.
A 0.050L solution of Ba(OH)2 is neutralized by 0.072L of a 0.55 M HNO3 solution. What is the concentration of the Ba(OH)2 solution?
Answer:
0.396M
Explanation:
Step 1:
The balanced equation for the reaction. This is given below:
2HNO3 + Ba(OH)2 —> Ba(NO3)2 + 2H2O
From the balanced equation above,
The mole ratio of the acid (nA) = 2
The mole ratio of the base (nB) = 1
Step 2:
Data obtained from the question. This include the following:
Volume of base (Vb) = 0.05L
Concentration of base (Cb) =..?
Volume of acid (Va) = 0.072L
Concentration of acid = 0.55 M
Step 3:
Determination of the concentration of the base, Ba(OH)2.
The concentration of the base, Ba(OH)2 can be obtained as follow:
Cava /CbVb = nA/nB
0.55 x 0.072 / Cb x 0.05 = 2/1
Cross multiply to express in linear form
Cb x 0.05 x 2 = 0.55 x 0.072
Divide both side by 0.05 x 2
Cb = (0.55 x 0.072) / (0.05 x 2)
Cb = 0.396M
Therefore, the concentration of the base, Ba(OH)2 is 0.396M
Write the full symbol for the isotope of oxygen having 8 neutrons.
Answer:
Isotopes are forms of a chemical element that have the same atomic number but differ in mass. 16O → 8 protons + 8 neutrons; a “light” oxygen); The relative amounts are expressed as either 18O/16O or δ 18O Oxygen - 18 (aka 18O → 8 protons + 10 neutrons; a “heavy” oxygen).
A child has a balloon in his house in the air conditioning. He goes outside with the balloon on a hot day. What happens to the temperature of the gas and volume of the balloon?
Answer:
There would be an increase in temperature and corresponding increase in the volume of the balloon
Explanation:
Charles law is been here
Charles law states that the volume of a given mass of gas is directly proportional to the temperature in Kelvin, provided that the pressure on the gas is kept constant. Mathematically Charles law can be represented thus;
V∝ T
Where V is the volume of the gas and;
T is the temperature.
Relating Charles Law to the question
The child moved outside from the room, constant atmospheric pressure is maintained.The temperature of the room is lower than the temperature outside.From Charles law postulation, there would be an increase in volume because of the increased temperature, since our pressure is same.
If a body was lying on their back when they died, and was moved to their front after 12 hours, where would one see the skin discoloration from pooling blood?
Answer:the parts of the body which is nearest to the ground ie thier back will show discoloration
Explanation:
If the body remains at a position for long hours, the parts of the body which is nearest to the ground can develop a skin discoloration as a result of pooling of blood in the tissues and this is called livor mortis, which tends to be permanent from 8Hours upwards.
The Sun is a constant supply of energy to Earth.
A. True
B. False
Which of the following did Antoine Lavoisier correctly characterize as an element? light silicone dioxide mercury
Answer: mercury
Explanation: I looked up the answer to your question.
Answer:
Mercury
Explanation:
I did this question and I got it right.
how many number of electrons are in aluminium and nitrogen in their free state?
Answer:
MRCORRECT has answered the question
Explanation:
13 electrons
So... for the element of ALUMINUM, you already know that the atomic number tells you the number of electrons. That means there are 13 electrons in a aluminum atom. you can see there are two electrons in shell one, eight in shell two, and three in shell three.
7 electrons
So... for the element of NITROGEN, you already know that the atomic number tells you the number of electrons. That means there are 7 electrons in a nitrogen atom. Looking at the picture, you can see there are two electrons in shell one and five in shell two.
Which is the molar mass of Calcium?
Answer:
40.078 u
Explanation:
What volume of oxygen gas at 20°C and 0.919 atm is
consumed in the production of 5.00 g of iron(III) oxide from
metallic iron?
4Fe(s) + 302(g) → 2Fe2O3 (9)
LO2
Answer:
Volume of oxygen gas is 78.47L
Explanation:
Data;
Temperature (T) = 20°C = (20 + 273.15)K = 293.15K
Pressure (P) = 0.919atm
Mass (m) = 5g
Volume (v) = ?
Equation of reaction;
4Fe + 3O₂ → 2Fe₂O₃
From the equation of reaction, the number of moles of oxygen is 3.
To find the volume of oxygen produced, we'll have to use ideal gas equation
PV = nRT
P = pressure
V = volume
n = number of moles
R = ideal gas constant = 0.082J/mol.K
T = temperature of the ideal gas
PV = nRT
V = nRT/ P
V = (3 × 0.082 × 293.15) / 0.919
V = 72.1149 / 0.919
V = 78.47L
Volume of the gas is 78.47L
How many times more acidic is a pH of 2 than a PH of 7?
Answer: 10 times more
Explanation:
what happens when light is not spread out
Answer:
Spreading out a wave over a larger area just causes the wave strength to weaken, but does not cause gaps to form. Therefore, if you look at photons as waves, spatial gaps never form in light as it travels through free space, no matter how dim it gets.Spreading out a wave over a larger area just causes the wave strength to weaken, but does not cause gaps to form. Therefore, if you look at photons as waves, spatial gaps never form in light as it travels through free space, no matter how dim it gets
Explanation:
The element hydrogen has the highest specific heat of all elements. At room temperature, hydrogen's specific heat is 14.30 J/g •°C. If the temperature of a 340.0 g sample of hydrogen is to be raised by 30°C, how much energy will have to be added to the hydrogen?
Answer:
THE ENERGY NEEDED TO BE ADDED TO RAISE THE TEMPERATURE BY 30°C IS 145, 860 J
Explanation:
The energy needed can be calculated by using the heat formula, which is;
Heat = m c ΔT
m = mass of the hydrogen = 340 g
c = specific heat capacity of hydrogen at room temperature = 14.30 J/g°C
ΔT = change in temperature = 30°C
Heat =?
So therefore,
Heat = 340 * 14.30 * 30
Heat = 145860 J
The energy needed to be added to the hydrogen to bring the mass of 340 g to an increased temperature of 30°C is 145, 860 J or 145.86kJ
A radioactive isotope has a half life of 25 minutes. How many half lives have occurred after 175 minutes?
5
6
7
8
Will give Brainliest
Answer:
7
Explanation:
Which answer gives both a positive impact and a negative impact associated with the effects of nitrogen- and phosphorus-enhanced fertilizers?
A- increased algal blooms and damage to drinking water
B- increased plant growth and damage to drinking water
C- increase in denitrifying bacteria and increase in plant growth
D- increase in a limiting resource and increase in denitrifying bacteria
Answer:
The answer is B
Explanation:
Answer:
Which answer gives both a positive impact and a negative impact associated with the effects of nitrogen- and phosphorus-enhanced fertilizers?
1. increased algal blooms and damage to drinking water
Right Answer 2. increased plant growth and damage to drinking water
3. increase in denitrifying bacteria and increase in plant growth
4. increase in a limiting resource and increase in denitrifying bacteria
Explanation:
Answer the questions using the drop-down menus.
Which is the independent variable in this experiment?
Which is the dependent variable in this experiment?
Which is a controlled variable in this experiment?
In the experiment to measure the heat absorbed by a material placed in
the Sun, we have;
The independent variable is either the angle of insulation or the type of materialThe dependent variable is the temperature of the materialThe controlled variable is the type of material when the angle of insulation is the independent variable and vice versaWhat differentiates the given experimental variables?The possible experiment is with regards to the factors that influence energy from the Sun
The factors investigated are;
The type of material and the angle of lighting (insulation) affects the absorption of heat
The independent variable is the variable that is the cause of the effect
measured in the experiment.
It is the variable that the researcher has control over or controls and
varies during the experiment to produce the measured effect.
In the above experiment, the independent variable are either ;
The angle of insulation or the type of material respectivelyThe dependent variable is the variable that is under test or that is being measured.
In the above experiment the dependent variable is the temperature of the material which can be measuredThe controlled variable is the variable that remains the same or is held
constant during the experiment and can be used as reference to
compare the dependent variable.
In the experiment, the controlled variable are either;
The type of material when the angle of insulation is the independent variable or vice versaLearn more about independent and dependent variables here:
https://brainly.com/question/3764906
Answer:
angle of light
temperature of material
type of material
Explanation:
E d g e 22 !
What happens when kmno4 is heated
Answer:
kmno4 is heated => k2mno4 + mno2 + o2
Hope this helps!
:)
The metabolic oxidation of glucose, C6H12O6, in our bodies produces CO2, which is expelled from our lungs as a gas.
C6H12O6(aq) + 6 O2(g) → 6 CO2(g) + 6 H2O(l)
Calculate the volume of dry CO2 produced at body temperature (37°C) and 0.960 atm when 24.5 g of glucose is consumed in this reaction.
Answer:
[tex]\large \boxed{\text{21.6 L}}[/tex]
Explanation:
We must do the conversions
mass of C₆H₁₂O₆ ⟶ moles of C₆H₁₂O₆ ⟶ moles of CO₂ ⟶ volume of CO₂
We will need a chemical equation with masses and molar masses, so, let's gather all the information in one place.
Mᵣ: 180.16
C₆H₁₂O₆ + 6O₂ ⟶ 6CO₂ + 6H₂O
m/g: 24.5
(a) Moles of C₆H₁₂O₆
[tex]\text{Moles of C$_{6}$H$_{12}$O}_{6} = \text{24.5 g C$_{6}$H$_{12}$O}_{6}\times \dfrac{\text{1 mol C$_{6}$H$_{12}$O}_{6}}{\text{180.16 g C$_{6}$H$_{12}$O}_{6}}\\\\= \text{0.1360 mol C$_{6}$H$_{12}$O}_{6}[/tex]
(b) Moles of CO₂
[tex]\text{Moles of CO}_{2} =\text{0.1360 mol C$_{6}$H$_{12}$O}_{6} \times \dfrac{\text{6 mol CO}_{2}}{\text{1 mol C$_{6}$H$_{12}$O}_{6}} = \text{0.8159 mol CO}_{2}[/tex]
(c) Volume of CO₂
We can use the Ideal Gas Law.
pV = nRT
Data:
p = 0.960 atm
n = 0.8159 mol
T = 37 °C
(i) Convert the temperature to kelvins
T = (37 + 273.15) K= 310.15 K
(ii) Calculate the volume
[tex]\begin{array}{rcl}pV &=& nRT\\\text{0.960 atm} \times V & = & \text{0.8159 mol} \times \text{0.082 06 L}\cdot\text{atm}\cdot\text{K}^{-1}\text{mol}^{-1} \times \text{310.15 K}\\0.960V & = & \text{20.77 L}\\V & = & \textbf{21.6 L} \\\end{array}\\\text{The volume of carbon dioxide is $\large \boxed{\textbf{21.6 L}}$}[/tex]
Which of these conclusions is correct about P and Q in the diagram?
P represents the land and Q represents the ocean.
P represents the ocean and Q represents the land.
P represents the land and Q represents the atmosphere.
P represents the atmosphere and Q represents the ocean.
Answer:
P represents the atmosphere and Q represents the ocean.
Explanation:
ILL GIVE YOU BRAINLIST * have to get it right * !!! Although individual body systems can perform specific functions, they depend on one another and work together for the good of the entire organism.
Which of the following provides the best evidence that the digestive system and the muscular system work together to carry out their functions?
What does the questions “how much?” and “how many?” have in common?
what is the compound of scI2
Answer:
sulfur dichloride
Explanation:
SCl2 is the chemical formula for sulfur dichloride. This compound is made of only two elements, so it is a binary compound.
How many senses does the human body have?
O A. 3
B. 5
Answer:
B
Explanation:
sight, hearing, smell, taste and touch
Answer:
Most easiest answer..
There are 5 senses in human body.☺️
Calculate the molar mass of ammonium chloride
Answer:
53.491 g/mol
Explanation:
Create the chemical compound and find each individual element's molar mass. Lastly, add them up.
What are three examples of acid-base reactions in cooking
Answer:
Lemon juice baking soda and vinegar
Explanation:
1. Calculate the molarity of 35g of calcium chloride (CaCl2) that is dissolved in 850ml of water. (Calculate moles first)
a. 0.27M
b. 0.38M
c. 0.32M
d. 0.80M
2. Calculate the molarity of 90g of copper sulfate (CuSO4) when dissolved in 5 L of water.
a. 0.112M
b. 2.8M
c. 0.56M
d. 0.50M
3. What is the molarity of NaOH if 0.70 moles are dissolved in 250 ml of water?
a. 175,000M
b. 2.8M
c. 0.175M
d. 4M
4. How many moles of Lithium oxide (Li20) are in 2 L of solution with a molarity of 2.0M?
a. 1 mole
b. 2 moles
c. 0.2 moles
d. 4 moles
5. How many moles of NaCl are in 7.5 L of 0.5M?
a. 3.75 moles
b. 15 moles
c. 0.066 moles
d. 2.5 moles
Answer:
yo I got same question do u know it
Whats the answer to 7/2 × 1/5?
Answer:7/10
Explanation:multiply top and bottom
Ideal Stoichiometry
Barium oxide has a replacement reaction with lithium. Calculate the mass of Barium oxide needed to react with 34.67 g of lithium.
*equation needed and thorough explanation please*
A- 340.5
B- 383.0
C- 455.0
D- 256.8
Answer:
the answer is 383.0
hope it is helpful
What is an example of a polyatomic ion
Answer: The hydroxide cation (OH -) and the phosphate cation (PO 4 3-) are both polyatomic ions.
Explanation:
Answer:
OH - and PO 4 3- are both polyatomic ions
Analysis: The limiting reactant(s) appeared to be
because
there is nothing with which it can react
Explanation:
The limiting reactant(s) prevents a reaction from continuing because there is none left.
Why do limiting reactants occur?Identification of the limiting reactant makes it possible to calculate the theoretical yield of a reaction. The reason there is a limiting reactant is that elements and compounds react according to the mole ratio between them in a balanced chemical equation.
How do you get the limiting reactant?The reactant that is consumed first and limits the amount of product(s) that can be obtained is the limiting reactant. To identify the limiting reactant, calculate the number of moles of each reactant present and compare this ratio to the mole ratio of the reactants in the balanced chemical equation.
Learn more about Limiting Reactant(s) here
https://brainly.com/question/14225536
#SPJ2
HELP PLEASE I WILL GIVE 100 PONTS
All of the following properties of a solution would decrease if you increased the concentration of solute, EXCEPT which?
A. freezing point
B. boiling point
C. vapor pressure
D. they would all decrease
Answer:
boiling point
Explanation:
