Answer:
put a salt into the beakers
When does carbon dioxide absorb the most heat energy?
during freezing
during deposition
during sublimation
during condensation
Answer:
it happenes during sublimation
Answer:
C
Explanation:
Edg
What is the balanced chemical reaction when Aluminium reacts with NaOH to produce NaAlO2 and H2 gas?
Answer:
2NaOH + 2Al +2H2O = 2NaAlO2 +3H
Explanation:
Aluminum is an amphoteric element it reacts with both bases and acids to form a salt and hydrogen gas.The reaction is highly exothermic.
what mass of small stones would be needed to make the strongest concrete? give a reason for your awnser.
Answer:
For a good consert mix aggregate needed to the clean hard strong partical free of absorb chemicals or coating clay and other fine materials
Two students were discussing the Mono Lake ecosystem. The first student said, "For a 20-kilogram (kg) coyote to survive, it takes around 200 kg of Wilson's phalaropes, 400 kg of brine shrimp, and 800 kg of algae!" The second student said, "No, I think it takes even more than that." 1. Which student is correct? What is your reasoning?
Answer:
The second student is right.
Explanation:
The coyote feed on not only phalaropes but many other organisms present in the environment for its survival. There are many other organisms present in the ecosystem such as mice, squirrel, cactus fruit etc. The coyote feeds on phalaropes, the phalaropes feeds on brine shrimp and the brine shrimp feeds on algae for its survival so in this way the ecosystem moves in the forward direction. The coyote feeds on phalaropes so the energy that is present in phalaropes transferred into coyote which only 10 % while the remaining is released in the atmosphere in the form of heat energy.
What does Seltzer Water have in common with Limestone ?
Tea contains which acid?
A
Tannic acid
B
Tartaric acid
C
Carbonic acid
D
Citric acid
I need help finding out what this is please help
Answer:
search the Lewis dot structure you will know the answer.
What properties can be used to identify substance and why?
Answer:
All substances can be characterized by their unique sets of physical and chemical properties. Properties that can be determined without changing the composition of a substance are referred to as physical properties. Characteristics such as melting point, boiling point, density, solubility, color, odor, etc.
You've made a hot drink by dissolving a teaspoon of instant coffee and a teaspoon of sugar in a cup of hot water. Which of the following statements is true? Group of answer choices The water is the solute portion of the drink. The instant coffee and sugar dissolve because they have no charged regions to repel the partial positive and partial negative regions of the water molecules. The instant coffee and sugar are solvents. You've just prepared an aqueous solution.
Answer: The statement, you've just prepared an aqueous solution is true.
Explanation:
When one or more number of substances are dissolved in a solvent like water then solution formed is called an aqueous solution.
For example, when a hot drink is made by dissolving a teaspoon of instant coffee and a teaspoon of sugar in a cup of hot water is an aqueous solution.
Here, both coffee and sugar are solute whereas hot water is the solvent.
Thus, we can conclude that the statement, you've just prepared an aqueous solution is true.
is radiation beneficial or harmful to society explain why
Answer:
Radiation isn't beneficial to society .Radiation damages the cells that make up the human body. Low levels of radiation are not dangerous, but medium levels can lead to sickness, headaches, vomiting and a fever. High levels can kill you by causing damage to your internal organs. It's difficult to treat high radiation exposure.
Explanation:
Exposure to very high levels of radiation, such as being close to an atomic blast, can cause acute health effects such as skin burns and acute radiation syndrome (“radiation sickness"). It can also result in long-term health effects such as cancer and cardiovascular disease.
Radiation is both harmful and beneficial, but when we analyse it is found that harms overweight benefits. Radiation can be used as a form of energy (in nuclear plants), but an accident or malfunction in it can lead to death and injury of humans. Also, it is really difficult to dispose the used devices.
What kind of pattern can you see about elements in the same period with respect to electron
structures?
Answer: A pattern of same atomic orbitals can be seen about elements in the same period with respect to electron structures.
Explanation:
The horizontal rows in a period table are called periods.
Elements present in the same period will have same atomic orbitals.
For example, electronic distribution of Na is 2, 8, 1 and it is a third period element.
Similarly, electronic distribution of Cl is 2, 8, 7 and it is also a third period element.
Hence, both Na and Cl will have K, L, M shells, that is, they have three atomic orbitals.
Thus, we can conclude that a pattern of same atomic orbitals can be seen about elements in the same period with respect to electron structures.
How many places after the decimal should your measurements contain?
Answer:
Minimum 2. ( Thats how I do, and till now there is no probs)
Thank You'
Hope it helps u
Please mark as brainliest
please help in all 3 questionnn
Answer:
Explanation:
a) photosynthesis
b) Substances used: water, sun, gas and nutrients. Products: glucose and flowers
c) there will be no sunlight or no open environment
Which of the following is not a reason why actual yield is less than theoretical yield?
A. presence of impure reactants
B. conservation of mass
C. competing side reactions
D. loss of product during purification
The option that isn't a reason why the actual yield is less than theoretical yield is B. conservation of mass.
It should be noted that the formula for the percent yield is given as:
= Actual yield / Theoretical Yield × 100
The actual yield is experimentally determined, and it's the quantity of a product that is gotten from a chemical reaction.The theoretical yield is the amount of product that can be obtained from a reaction when the reactants are changed to products.Actual yield can be less than theoretical yield due to the presence of impure reactants ,competing side reactions, and loss of product during purification.
In conclusion, the correct option is B.
Read related link on:
https://brainly.com/question/23854893
What is the product of
Mg(NO3)2 + Na2CO3?
Answer:
MgCO3 + 2 NaNO3
Explanation:
what is the oxidation state of p in po4 3
Answer:+5
Explanation: A P3X
Se puede inferir que el órgano de los sentidos que contiene un mayor número de terminaciones nerviosas debido a su extensión es *
Answer:
La piel.
Explanation:
La piel es el órgano que forma el límite del cuerpo con el mundo exterior. La piel sirve para varios propósitos. Protege al cuerpo de influencias externas como el calor, el frío, la radiación o las bacterias y ayuda a mantener un ambiente interno estable. La piel está fuertemente atada a los huesos y tejidos. Por lo general, la piel alberga más de 100 especies bacterianas diferentes y algunas investigaciones sugieren que la mayoría de estas bacterias son beneficiosas y aumentan la probabilidad de que se evite la infestación de parásitos.
A 2.0 M solution of LiF had 4.00 moles of LiF added to a solvent to make it.
What is the volume of this solution?
A. 2 L
B. 3 L
C. 6 L
D. 8 L
Its 2L Btw
Answer:
2 L
Explanation:
From the question given above, the following data were obtained:
Molarity of LiF = 2 M
Mole of LiF = 4 moles
Volume =?
Molarity of a solution is simply defined as the mole per unit litre of the solution. Mathematically, it is expressed as:
Molarity = mole / Volume
With the above formula, we can obtain the volume of the solution as shown below:
Molarity of LiF = 2 M
Mole of LiF = 4 moles
Volume =?
Molarity = mole / Volume
2 = 4 / volume
Cross multiply
2 × volume = 4
Divide both side by 2
Volume = 4/2
Volume = 2 L
Therefore, the volume of the solution is 2 L.
What type of force are you exerting when you lie on a bed?
A. Electric force
B. Magnetic force
C. Compression
D. Tension
Answer:
C. Compression
Explanation:
I'm pretty sure it's compression
Explain and describe how the photoelectric effect occurs on an atomic level in terms of protons, neutrons, and electrons
Answer:
The photoelectric effect is the emission of electrons when electromagnetic radiation, such as light, hits a material. Electrons emitted in this manner are called photoelectrons.
Based on the wave model of light, physicists predicted that increasing light amplitude would increase the kinetic energy of emitted photoelectrons, while increasing the frequency would increase measured current.
Cooling the concentrated ammonia and hydrochloric acid before carrying out the experiment increased the time taken for the white cloud to form
A brass metal bar is made up of copper and zinc. (Between 50% to 70% is copper.) A brass metal bar weighs 20.15 ounces. 35% of the bar is zinc. How many ounces of copper are in the bar?
Answer:
The correct answer would be - 13.0975 ounces.
Explanation:
We know that brass is made up of zinc and copper. The copper part of the brass is approximately around 50 to 70% and the remaining is the zinc part.
Given:
Zinc percentage in a brass = 35%
copper percentage would be - 65% (100 - 35 = 65)
Weight of the brass metal bar = 20.15 ounce
ounces of copper are in the bar = ?
Solution:
The weight of the copper in the brass metal in ounces-
= weight of brass* percentage of copper/100
= 20.15*65/100
= 13.0975 ounces of copper.
2nd method =
The weight of the zinc in the brass metal in ounces-
= weight of brass* percentage of zinc/100
= 20.15*35/100
= 7.0525
The weight of the copper = total weight - weight of zinc
= 13.0975 ounces of copper.
which synthetic fiber feels like wool and used as a substitute for wool
Answer:
Acrylic
Acrylic is the synthetic fibre feels like wool and used as a substitute for wool.
5 grams of iron react with 5 grams of oxygen to produce iron 3 oxide. If I produce 5 grams of product what is my percent yield?
Answer:
5 grams of iron react with 5 grams of oxygen to produce iron 3 oxide.
The actual yield of the reaction is--- 5 grams.
What is the percent yield?
Explanation:
The balanced chemical equation of the reaction is:
[tex]4Fe(s)+3O_{2} (g)->2Fe_{2} O_3(s)[/tex]
1)Identify the limiting reagent.
2)Using the limiting reagent calculate the amount of theoretical yield formed.
Identification of limiting reagent:
4 mol of Fe reacts with 3mol. of O2
that is:
4mol(55.84g/mol) of Fe reacts with ---- 3mol (32.0g/mol)
=223.36g of Fe reacts with ---- 96g. of O2
then,
5g of Fe requires how many grams of O2?
[tex]=>5g. of Fe * \frac{96g O2}{223.36g Fe} \\=2.14g. of O_{2} .\\[/tex]
But provided 5g of O2.
So, O2 is present more than required.
Hence, O2 is the excess reagent and the limiting reagent is Fe.
The amount of product formed depends only on the amount of Fe only.
Theoretical yield:
From the balanced chemical equation:
4mol. of Fe forms ----- 2mol. of Fe2O3.
that is
223.36g of Fe forms --- 2(159.68g)of Fe2O3.
=>223.36g of Fe forms --- 319.36g of Fe2O3.
then,
5g of Fe forms ----? grams of Fe2O3
[tex]=>5g of Fe * \frac{319.36g Fe2O3}{223.36g of Fe} \\=7.14g. of Fe2O3\\[/tex]
[tex]%Error =\frac{actual yield}{theoretical yield} * 100\\\\ %error=\frac{5g}{7.14g} * 100\\ %error =70.0[/tex]% error=actual yield/ theoretical yield x 100
%error=5g./7.14g x100
=>%error=70.0
Hence, the answer is 70.0%.
Differentiate between nuclear fusion and fission .
Answer:
Explanation:
the difference is below:
The only two elements in alkenes and alkynes are A. Carbon and Nitrogen B. Carbon and Hydrogen C. Oxygen and Nitrogen D. Oxygen and Hydrogen
Answer:
B. Carbon and Hydrogen
Explanation:
An alkyne can be regarded as unsaturated hydrocarbon which have at least one carbon—carbon triple bond. They are acyclic aliphatic hydrocarbons, they can be (branched or unbranched) , They have general chemical formula of [ CₙH₂ₙ−2]. One of the compound belonging to this family is Propyne( C3H4) Hence, they contain Hydrogen and Carbon.
Alkenes can be regarded as class of hydrocarbons which posses only carbon and hydrogen, they are unsaturated compounds having least one carbon-to-carbon double bond.
alkenes can also be regarded as "olefins". one of the members of this family is Ethene (C2H4). general formula of alkenes can be written as [C nH 2n],
n=number of carbon atoms present in the molecule
Is the number of electrons in different shells of an atom fixed or unlimited ? Explain by giving an example.
Answer:
the number of electrons in a particular shell is given by the formula 2n^2 . However an electron when gets very exicited loose energy in the forms of radiation and comes in high energy level shell.
When copper is heated in air, the solid product that is formed has a greater mass than the original copper. When calcium carbonate is heated in air, the solid product that is formed has less mass than the original
calcium carbonate. Why is the mass of the solid product greater in one reaction but less in the other reaction?
Answer:
When heated, oxygen reacts with copper to form copper oxide. If this reaction occurs in a sealed container, will the mass of the container and everything in it increase, decrease, or stay the same and why? The mass will increase because a new kind of molecule is formed.
Explanation:
As above, carbonates decompose upon heating to give the metal oxide and carbon dioxide. The mass is lost as carbon dioxide.
To solve this we must be knowing each and every concept related to mass. Therefore, Carbon dioxide is released as the mass is depleted when carbonates are heated.
What is mass?Mass defines the quantity of a substance. It is measured in gram or kilogram. Average mass is the mass of atoms of an element that are isotopes.
When copper was heated in the air, the resulting solid product has a larger mass than the initial copper. When calcium carbonate was heated in air, the resulting solid product has much less mass than the initial calcium carbonate. When carbonates are heated, they breakdown into metal oxides and carbon dioxide. Carbon dioxide is released as the mass is depleted.
Therefore, Carbon dioxide is released as the mass is depleted.
To learn more about mass, here:
https://brainly.com/question/28704035
#SPJ2
Physical properties can be divided into two categories. _______ depend on the amount of matter present, while _______ don't.
The chart shows the bids provided by four contractors to complete a job. Which contractor is the most cost-effective? Joshua Carmen Dante Alicia
Chart for question attached
Answer:
Joshua
Explanation:
By cost-effective here, we mean the contractor that does the job best at the shortest time and lowest money cost. To get this, we calculate total cost for each contractor and then consider time for completion of the job:
Joshua charges $25 per hour for 5 hrs
Carmen charges $20 per hour for 7 hrs
Dante charges $30 per hour for 6 hrs
Alicia charges $20 per hour for 8 hrs
Joshua's cost= $25×5=$125 in 5 hours
Carmen's cost = $20×7= $140 in 7 hours
Dante's cost= $30×6=$180 in 6 hours
Alicia's cost= $20×8= $160 in 8 hours
From the above we can see that Joshua is the most cost-effective contractor given that he completes the job in less time and with less money.
