Please help I'm having a mental breakdown

In a series circuit, Vsource =20.0 V, R1 = 30.0 Ω, and R2 = 12.0 Ω. In 10.0 s, how many coulombs of charge pass through the circuit?


I have a test tomorrow morning and I'm pretty sure something like this will be on it so please help me :(

Answer:

Part A

The cart with low fan mass has an average velocity of approximately 63.29 cm/s

Part B

The cart with medium fan mass has an average velocity of approximately 45.[tex]\overline{045}[/tex] cm/s

Part C

The cart with high fan mass has an average velocity of approximately 36.496 cm/s

Explanation:

Part A

The average velocity is given as follows;

[tex]Average \ velocity, v_{average} = \dfrac{Total \ distance}{Elapsed \time \ to \ finish \ line} = \dfrac{\Delta x}{\Delta t}[/tex]

The average velocity for the 2 kg fan mass, which is the cart with low fan mass, is [tex]v_{average}[/tex] = 500 cm/7.9 s ≈ 63.29 cm/s

The cart with low fan mass has an average velocity [tex]v_{average}[/tex] ≈ 63.29 cm/s

Part B

The average velocity of the cart with medium fan mass, 4 kg, is [tex]v_{average}[/tex] = 500 cm/11.1 s = 45.[tex]\overline{045}[/tex] cm/s

The cart with medium fan mass has an average velocity [tex]v_{average}[/tex] ≈ 45.[tex]\overline{045}[/tex] cm/s

Part C

The average velocity of the cart with high fan mass, 6 kg, is [tex]v_{average}[/tex] = 500 cm/13.7 s = 36.496 cm/s

The cart with high fan mass has an average velocity [tex]v_{average}[/tex] ≈ 36.496 cm/s.

Answer:

its

67.6

78.1

89.3

Explanation:

i just took the assignment,  2021.

BLUEBLACK COLOR IS FORMED WHEN STARCH AND IODINE IS MIXED .

Answer:

Explanation:

Heredity is defined as the passage of genetic instructions from one generation to the next.

Answer:

Option D. ²³⁹₉₃Np

Explanation:

Let the unknown be ʸₓA.

Thus, the equation becomes:

²³⁹₉₂U —> ⁰₋₁e + ʸₓA

Next, we shall determine the x, y and A. This can be obtained as follow:

92 = –1 + x

Collect like terms

92 + 1 = x

93 = x

x = 93

239 = 0 + y

239 = y

y = 239

ʸₓA => ²³⁹₉₃A => ²³⁹₉₃Np

Thus, the complete equation is:

²³⁹₉₂U —> ⁰₋₁e + ²³⁹₉₃Np

Answer:

Eletromagnetic radiation which is also known as visible light.

Explanation:

Answer:

Gamma Ray's as they have the shortest wavelength and highest frequency in the electromagnetic Spectrum.

Answer:

Soluble - salt

Insoluble - sand and stapler pins

Explanation:

The salt is soluble because it is an ionic solid which ready dissolves in water to form a solution.

The sand is insoluble because, it is a non-metallic solid which does not readily dissolve in water while, the stapler pin is insoluble because it is a metallic solid which does not readily dissolve in water.

Answer:

True

Explanation:

Minerals can be defined as any form of naturally occurring, inorganic solid substance characterized by a crystal structure. Also, minerals are homogeneous in nature with a defined chemical composition and characterized by a crystal structure comprising of ions, atoms, or molecules in an orderly arrangement.

Generally, molecules attach on the inside of a mineral to give it shape. Therefore, the molecule of a mineral is a crystal three-dimensional regular structure (arrangement) of chemical particles that are bonded together and determines its shape.

Furthermore, the chemical composition (property) of a mineral reflect the presence and arrangement of atoms in each.

Due to the fact that these molecules are structurally arranged (ordered) and are repeated by different symmetrical and translational operations, they determine the shape of minerals. Some examples of minerals are iron, copper, aluminum, tin, coal, quartz, feldspar, mica, etc.

Additionally, inorganic-crystalline solid substances which are found naturally within earth are referred to as minerals.

In conclusion, a mineral in the earth's crust exists naturally in form of solid elements or compounds.

Answer:

24 m/s²

Explanation:

The given parameters are;

The initial acceleration of the object, a = 16 m/s²

Let 'm' represent the initial mass of the object

The initial force acting on the object, F = m × a

∴ F = 16 × m = 16·m

When the mass is doubled, we have;

The new mass of the object, m₂ = 2 × m = 2·m

When the net force acting on the object triples, we have;

The new net force acting on the object, F₂ = 3 × F = 3 × 16·m = 48·m

From F = m × a, we have;

a = F/m

∴ The new acceleration of the object, a₂ = F₂/m₂

From which, by plugging in the values, we have;

a₂ = 48·m/(2·m) = 24

The new acceleration of the object, a₂ = 24 m/s².

Answer:

111011

Explanation:

59/2 = 29, remainder is 1

29/2 = 14, remainder is 1

14/2 = 7, remainder is 0

7/2 = 3, remainder is 1

3/2 = 1, remainder is 1

1/2 = 0, remainder is 1

[tex]speed = \frac{distance}{time} \\ = 100 \div 5 \\ = 20m \: per \: second[/tex]

#CarryOnLearning

Answer:

What causes atoms to be radioactive? ... Instability of an atom's nucleus may result from an excess of either neutrons or protons. A radioactive atom will attempt to reach stability by ejecting nucleons (protons or neutrons), as well as other particles, or by releasing energy in other forms

Answer:

Before the collision:

m v1 = .5 kg * 15 m/s = 7.5 kg-m/s

Incidentally, after the collision

(M + m) v2 = 7.5

v2 = 7.5 / (1 + .5) = 5 m/s

Answer:

W = 588 N

Explanation:

The given question is ,"calculate the weight of a table on the earth whose mass is 60 kg"

The mass of the table, m = 60 kg

We need to find the weight of a table on the earth.

The weight of an object is given by :

W = mg

Where

g is acceleration due to gravity

W = 60 kg × 9.8 m/s²

W = 588 N

Hence, the weight of the table is 588 N.

Answer:

A

Explanation:

As u will divide the sound of air with The length which is also the alternative formula for calculating frequency

Answer:

-It holds people's belongings tight to Earth's surface

-it helps cool Earth's surface

- it keeps the solar wind from reaching earth

Answer:

No, work isn't being done by Johnny.

Explanation:

Work can be defined as the energy transferred to a physical object by exertion of a force on the object to cause a displacement of the object. Thus, work is typically done when a person or simple machine move an object over a distance through the application of a force.

Mathematically, work done is given by the formula;

Work done = force * distance

[tex] W = F * d[/tex]

Where,

W is the work done

F represents the force acting on a body.

d represents the distance covered by the body.

In this scenario, Johnny's push didn't cause a displacement of the wall and as such no work is done.

2.75 m/s. Hope this helps.

Answer: D

Explanation:

Answer:

All options presented were applied to the answer.

Explanation:

The sample response presented in the question above, refers to a closed system where two molecules after colliding satisfy the conservation of momentum law, which can also be called the conservation law of linear momentum. This law states that in a closed system the initial state of the components must be maintained and remain the same until the final state, that is, the two molecules maintain their ideal momentum before and after the collision. This means that if they had 1.5 kg • m/s before the collision, this value must be maintained after the collision. All these concepts are presented in the sample response.

Answer:

What did you include in your response? Check all that apply. The law of conservation of momentum is satisfied. The momentum before the collision is 1.5 kg • m/s. The momentum after the collision is 1.5 kg • m/s. The momentum before and after the collision is the same.

Explanation:

The sample response presented in the question above, refers to a closed system where two molecules after colliding satisfy the conservation of momentum law, which can also be called the conservation law of linear momentum. This law states that in a closed system the initial state of the components must be maintained and remain the same until the final state, that is, the two molecules maintain their ideal momentum before and after the collision. This means that if they had 1.5 kg • m/s before the collision, this value must be maintained after the collision. All these concepts are presented in the sample response.

Answer:

1.

a. T

b. F

c. T

d. F

e. T

2. Liquid, gas, solid

3. Water

4.

a. Solid

b. Gas

c. Water

5.

a. Add heat

b. Remove heat

c. Add heat

Answer:

Net displacement = 0

Distance traveled = 2PQ <_up and down

Explanation:

Answer:

The system prevents a consumer from accruing debt via electricity use, as it only allows the customer to use electricity which has been paid for upfront.

this gives the advantage of not allowing the consumer to rack up debt

the disadvantage for the consumer comes when they cannot afford to prepay in a time of financial difficulty - as the system now renders them as having no electricity as well as no money

Answer:

4.186 m/s^2

Explanation:

First, convert km/hr to m/s:

(75 km/hr)(1000m/1km)(1hr/60min)(1min/60s) = 20.83 m/s

Then, divide 20.93 m/s by 5.0s

(20.93 m/s) / (5.0s) = 4.186 m/s^2

Answer:

[tex](a)\\1.97\times 10^8 m/s\\(b)\\1.99\times 10^8 m/s \\(c)\\2.21 \times 10^8 m/s[/tex]

Explanation:

According to the definition of refractive index, the refractive index of the material is defined as the ratio of speed of light in vacuum to the speed of light in medium.

(a) refractive index, n = 1.52

[tex]n=\frac {c}{v}\\\\1.52 = \frac{3\times 10^8}{v}\\\\v = 1.97\times 10^8 m/s[/tex]

(b) refractive index, n = 1.51

[tex]n=\frac {c}{v}\\\\1.51 = \frac{3\times 10^8}{v}\\\\v = 1.99\times 10^8 m/s[/tex]

(c) refractive index, n = 1.36

[tex]n=\frac {c}{v}\\\\1.36 = \frac{3\times 10^8}{v}\\\\v = 2.21\times 10^8 m/s[/tex]

Answer:

Explanation:

The color of the object is reflected by the object other colors are absorbed by the object.

Here object appears in red color so red color is reflected by the object and other colors are absorbed.

Answer:

300 coulombs.

Explanation:

We know that:

Current(A) = quantity of charge (coulomb) / time(secs)

But we are looking for the charge. So we do this:

Quantity of charge = Current (A) × Time (secs)

2 mins = (60 × 2) secs = 120 secs

2.5A × 120 secs = 300 coulombs

Answer:

90.8%

Explanation:

efficiency = output / input

Simply just put in what we know.

386/425 = 0.908 (Rounded too 3 s.f)

And if you want this in percentage, you simply x100 your answer. Hence the answer being 90.8%

Answer:

In physics, equations of motion are equations that describe the behaviour of a physical system in terms of its motion as a function of time.

There are 5 types of equations of motion:

[tex]v = u + at[/tex]    (Velocity)                                                                [tex]v =[/tex] final velocity [tex]v^{2} = u^{2} + 2as[/tex]   (Velocity squared)                                             [tex]u =[/tex] initial velocity   [tex]s = ut + \frac{1}{2} at^{2}[/tex]  (Displacement with positive acceleration)      [tex]a=[/tex] acceleration[tex]s = vt - \frac{1}{2} at^{2}[/tex]   (Displacement with negative acceleration)      [tex]t=[/tex] time[tex]s=\frac{1}{2} (u+v) t[/tex]  (Displacement)                                                    [tex]s=[/tex]  displacement                                                                                 (vector version of distance)