please help me 25 points

Answer:

x = 17

Step-by-step explanation:

Subtract 6x from both sides:

2x - 18 = 16

Add 18 on both sides to isolate the variable:

2x = 18 + 16

2x = 34

Divide by 2: x = 17

The probability of each of the events of {at most three lines are in use}, {fewer than three lines are in use}, {at least three lines are in use, {between two and five lines, inclusive, are in use}, {between two and four lines, inclusive, are not in use} and {at least four lines are not in use} are 0.70, 0.45, 0.55, 0.80, 0.35 and 0.40 respectively.

The problem involves finding probabilities of different events for a mail-order company with six telephone lines. The probability mass function (pmf) is given, and we use it to calculate the probabilities of different events such as "at most three lines are in use" or "between two and five lines, inclusive, are in use".

To calculate these probabilities, we use basic probability formulas such as the addition rule, subtraction rule, and the complement rule.

P(X ≤ 3) = 0.10 + 0.15 + 0.20 + 0.25 = 0.70

P(X < 3) = 0.10 + 0.15 + 0.20 = 0.45

P(X ≥ 3) = 1 - P(X < 3) = 1 - (0.10 + 0.15 + 0.20) = 0.55

P(2 ≤ X ≤ 5) = P(X ≤ 5) - P(X < 2) = (0.10 + 0.15 + 0.20 + 0.25 + 0.20) - 0.10 = 0.80

P(2 ≤ X ≤ 4) = 0.20 + 0.25 + 0.20 = 0.65, so P(2 ≤ X ≤ 4)ᶜ = 1 - 0.65 = 0.35

P(X ≥ 4) = 0.20 + 0.05 + 0.05 = 0.30, so P(X ≤ 3) = 1 - P(X ≥ 4) = 0.70 - 0.30 = 0.40

These formulas are applied based on the given events to determine the probabilities.

To know more about Probability:

https://brainly.com/question/11234923

#SPJ4

Answer:

The formula to calculate the amount of loan with flat rate interest is:

Amount = Principal + (Principal x Rate x Time)

Where,

Principal = the amount of loan

Rate = the interest rate per year

Time = the time period in years

Given,

Principal = K40,000.00

Rate = 9% per year

Time = 2.5 years

Substituting the values in the formula, we get:

Amount = K40,000.00 + (K40,000.00 x 0.09 x 2.5)

Amount = K40,000.00 + K9,000.00

Amount = K49,000.00

Therefore, the amount he will pay the bank is K49,000.00.

The direction angle of the electric field at the point (x = 1.10 m, y = 0.400 m, z = 0) is approximately 74.5 degrees clockwise from the positive x-axis in the xy plane.

To calculate the electric field at the point (x = 1.10 m, y = 0.400 m, z = 0), we need to take the negative gradient of the electric potential V:

E = -∇V

where ∇ is the del operator, which is given by:

∇ = i(∂/∂x) + j(∂/∂y) + k(∂/∂z)

and i, j, k are the unit vectors in the x, y, and z directions, respectively.

To calculate the magnitude of the electric field at the point, we first need to find the partial derivatives of V with respect to x and y:

∂V/∂x = 2Axy - By^2

∂V/∂y = Ax^2 - 2Bxy

Substituting the values of A, B, x, and y, we get:

∂V/∂x = 2(5.00 V/m^3)(1.10 m)(0.400 m) - (8.00 V/m^3)(0.400 m)^2 = 0.44 V/m

∂V/∂y = (5.00 V/m^3)(1.10 m)^2 - 2(8.00 V/m^3)(1.10 m)(0.400 m) = -1.64 V/m

Next, we can calculate the magnitude of the electric field:

E = -∇V = -i(∂V/∂x) - j(∂V/∂y) - k(∂V/∂z)

= -i(0.44 V/m) + j(1.64 V/m) + 0k

= (0.44 i - 1.64 j) V/m

The magnitude of the electric field is given by:

|E| = sqrt((0.44 V/m)^2 + (-1.64 V/m)^2) = 1.70 V/m

Therefore, the magnitude of the electric field at the point (x = 1.10 m, y = 0.400 m, z = 0) is 1.70 V/m.

To calculate the direction angle of the electric field, we need to find the angle that the electric field vector makes with the positive x-axis in the xy plane.

The angle can be found using the arctan function:

θ = arctan(Ey/Ex)

Substituting the values of Ex and Ey, we get:

θ = arctan(-1.64 V/m / 0.44 V/m) = -1.30 radians

The negative sign indicates that the direction angle is measured counter clockwise from the negative x-axis, which is equivalent to measuring clockwise from the positive x-axis.

Converting to degrees, we get:

θ = -1.30 radians * (180 degrees / pi radians) = -74.5 degrees

Therefore, the direction angle is approximately 74.5 degrees clockwise in the xy plane.

To know more about electric field:

https://brainly.com/question/14768728

#SPJ4

Matrix B and AB both are invertible implies that A is invertible as a matrix C such that AC = CA = I.

For matrix A to be invertible,

Show that there exists a matrix C such that AC = CA = I,

where I is the identity matrix.

Since B and AB are both invertible,

There exist matrices D and E such that ,

BD = DB = I

And ABE = EAB = I.

Multiplying both sides of the equation ABE = I by D on the left and E on the right, we get,

ADEBE = DE

Since BD = I, we can simplify this to,

ADE = DE

Multiplying both sides of this equation by B on the left and B^(-1) on the right, we get,

AD = DB^(-1)

Now, let C = DB^(-1).

Then we have,

AC

= ADB^(-1)

= ABEB^(-1)

= AI

= A

and

CA

= DB^(-1)A

= DB^(-1)ABE

= DI

= I

Therefore, A is invertible as a matrix C such that AC = CA = I.

learn more about matrix here

brainly.com/question/13100048

#SPJ4

James wοuld have tο pay a tοtal οf 188.10 Singapοre dοllars fοr the item and shipping and handling cοsts.

Prοbability is a measure οf the likelihοοd οf an event οccurring. It is a numerical value between 0 and 1, where 0 means the event is impοssible and 1 means the event is certain tο οccur. Fοr example, the prοbability οf flipping a fair cοin and getting heads is 1/2 οr 0.5.

Tο calculate the tοtal cοst in Singapοre dοllars, we need tο cοnvert the US dοllars tο Singapοre dοllars using the given exchange rate, and then add the twο cοsts tοgether.

The cοst οf the item in Singapοre dοllars is:

75 USD * 1.65 SGD/USD = 123.75 SGD

The shipping and handling cοst in Singapοre dοllars is:

39 USD * 1.65 SGD/USD = 64.35 SGD

The tοtal cοst in Singapοre dοllars is the sum οf these twο cοsts:

Tοtal cοst = 123.75 SGD + 64.35 SGD = 188.10 SGD

Therefοre, James wοuld have tο pay a tοtal οf 188.10 Singapοre dοllars fοr the item and shipping and handling cοsts.

Learn more about Probability

https://brainly.com/question/29381779

#SPJ1

Answer: We can simplify the expression inside the absolute value first:

|(sqrt(2) + 3 - 5)|

= |(sqrt(2) - 2)|

Since sqrt(2) > 2, we know that sqrt(2) - 2 is negative. Therefore, we can rewrite the absolute value as a negative:

|sqrt(2) - 2| = -(sqrt(2) - 2)

So the expression without absolute value is:

-(sqrt(2) - 2)

Step-by-step explanation:

Answer:

the two numbers are 15 and 35, and their ratio is 3:7, and their difference is 20.

Step-by-step explanation:

Answer: 44%

Step-by-step explanation:

22 is the smallest of the two numbers, and you want that number as a percentage of the sum of the two numbers. So basically it is asking you to put 22/(22+28) as a percentage. The step by step is as follows:

1. Simplify denominator

22+28 = 50

2. Rewrite the fraction so that the numerator is out of 100

22/50 = 44/100

3. Convert this new fraction to percentage

44/100= 44%

Hope this helps!!

The surface area of the surface generated by rotating the curve y = x² about the y-axis, and we found that the surface area is approximately 54.33 square units.

In this case, the curve we want to rotate is y = x², and we want to rotate it about the y-axis. To use the formula above, we need to express the equation of the curve in terms of x. Therefore, we need to rewrite y = x² as x = √y.

Next, we need to find the derivative of x = √y with respect to y, which is:

dx/dy = 1/2√y

Substituting this into the formula for the surface area, we get:

Surface Area = 2π ∫[0,4] √y √(1+(1/2√y)²) dy

Simplifying the expression inside the square root, we get:

Surface Area = 2π ∫[0,4] √(y+(1/4)) dy

We can evaluate this integral using the power rule of integration, which gives:

Surface Area = 2π [2/3(y+(1/4))^(3/2)]₀⁴

Simplifying further, we get:

Surface Area = 2π [2/3(17/4)^(3/2)]

Surface Area ≈ 54.33 square units

Therefore, the surface area of the surface generated by rotating the curve y = x² about the y-axis is approximately 54.33 square units.

To know more about surface area here

https://brainly.com/question/27784309

#SPJ4

Complete Question:

How do you find the area of the surface generated by rotating the curve about the y-axis y = x^2 , 0 ≤ x ≤ 2 ?

Answer: y = 12 - 1.25x

Step-by-step explanation:

Let y be the number of yards of fabric remaining after Tara sews x tote bags.

Initially, Tara has 12 yards of fabric. For every tote bag she sews, she uses 1.25 yards of fabric. Therefore, the total amount of fabric used after sewing x tote bags is 1.25x yards.

The number of yards of fabric remaining is the difference between the initial amount of fabric and the total amount of fabric used:

y = 12 - 1.25x

This equation shows how the number of yards of fabric remaining depends on the number of tote bags Tara sews, x. As she sews more tote bags, the amount of fabric remaining decreases.

Answer:

5.75 yds left

1.25 yards each bag multiplied by 5 bags is 6.25 yards utilized

Tara's yardage was 12-6.25 = 5.75.

She has 5.75 yards to go.

Step-by-step explanation:

brainliest pls

Answer:

We have two equations:

√x +2y^2 = 15 ----(1)

√4x - 4y^2=6 ----(2)

Let's solve for x:

From (1), we have:

√x = 15 - 2y^2

Squaring both sides, we get:

x = (15 - 2y^2)^2

Expanding, we get:

x = 225 - 60y^2 + 4y^4

From (2), we have:

√4x = 6 + 4y^2

Squaring both sides, we get:

4x = (6 + 4y^2)^2

Expanding, we get:

4x = 36 + 48y^2 + 16y^4

Substituting the expression for x from equation (1), we get:

4(225 - 60y^2 + 4y^4) = 36 + 48y^2 + 16y^4

Simplifying, we get:

900 - 240y^2 + 16y^4 = 9 + 12y^2 + 4y^4

Rearranging, we get:

12y^2 - 12y^4 = 891

Dividing both sides by 12y^2, we get:

1 - y^2 = 74.25/(y^2)

Multiplying both sides by y^2, we get:

y^2 - y^4 = 74.25

Let z = y^2. Substituting, we get:

z - z^2 = 74.25

Rearranging, we get:

z^2 - z + 74.25 = 0

Using the quadratic formula, we get:

z = (1 ± √(1 - 4(1)(74.25))) / 2

z = (1 ± √(-295)) / 2

Since the square root of a negative number is not real, there are no real solutions for z, which means there are no real solutions for y and x.

Therefore, the answer is "no solution".

Answer:

[tex]\dfrac{4096\pi}{5}\approx 2573.593\; \sf (3\;d.p.)[/tex]

Step-by-step explanation:

The shell method is a calculus technique used to find the volume of a solid revolution by decomposing the solid into cylindrical shells. The volume of each cylindrical shell is the product of the surface area of the cylinder and the thickness of the cylindrical wall. The total volume of the solid is found by integrating the volumes of all the shells over a certain interval.

The volume of the solid formed by revolving a region, R, around a vertical axis, bounded by x = a and x = b, is given by:

[tex]\displaystyle 2\pi \int^b_ar(x)h(x)\;\text{d}x[/tex]

where:

[tex]\hrulefill[/tex]

We want to find the volume of the solid formed by rotating the region bounded by y = 0, y = √x, x = 0 and x = 16 about the y-axis.

As the axis of rotation is the y-axis, r(x) = x.

Therefore, in this case:

[tex]r(x)=x[/tex]

[tex]h(x)=\sqrt{x}[/tex]

[tex]a=0[/tex]

[tex]b=16[/tex]

Set up the integral:

[tex]\displaystyle 2\pi \int^{16}_0x\sqrt{x}\;\text{d}x[/tex]

Rewrite the square root of x as x to the power of 1/2:

[tex]\displaystyle 2\pi \int^{16}_0x \cdot x^{\frac{1}{2}}\;\text{d}x[/tex]

[tex]\textsf{Apply the exponent rule:} \quad a^b \cdot a^c=a^{b+c}[/tex]

[tex]\displaystyle 2\pi \int^{16}_0x^{\frac{3}{2}}\;\text{d}x[/tex]

Integrate using the power rule (increase the power by 1, then divide by the new power):

[tex]\begin{aligned}\displaystyle 2\pi \int^{16}_0x^{\frac{3}{2}}\;\text{d}x&=2\pi \left[\dfrac{2}{5}x^{\frac{5}{2}}\right]^{16}_0\\\\&=2\pi \left[\dfrac{2}{5}(16)^{\frac{5}{2}}-\dfrac{2}{5}(0)^{\frac{5}{2}}\right]\\\\&=2 \pi \cdot \dfrac{2}{5}(16)^{\frac{5}{2}}\\\\&=\dfrac{4\pi}{5}\cdot 1024\\\\&=\dfrac{4096\pi}{5}\\\\&\approx 2573.593\; \sf (3\;d.p.)\end{aligned}[/tex]

Therefore, the volume of the solid is exactly 4096π/5 or approximately 2573.593 (3 d.p.).

[tex]\hrulefill[/tex]

[tex]\boxed{\begin{minipage}{4 cm}\underline{Power Rule of Integration}\\\\$\displaystyle \int x^n\:\text{d}x=\dfrac{x^{n+1}}{n+1}(+\;\text{C})$\\\end{minipage}}[/tex]

If the slope of the graph is increasing from positive x-axis to negative x-axis, then the function is not that decreasing. Therefore, Jonathan's statement is incorrect.

The function is decreasing on intervals where the slope is negative. In this case, since the slope is increasing from positive x-axis to negative x-axis, the function is decreasing on the interval where x is negative.

To determine this interval more precisely, we would need to find the x-value(s) where the slope changes sign from positive to negative. These x-values correspond to critical points, such as local maximums or minimums. The function is decreasing before a local maximum and after a local minimum.

Therefore, Jonathan's statement is not correct, and the function represented by the graph is decreasing on the interval where x is negative.

Learn more about graph function from

https://brainly.com/question/24335034

brainly.com/question/26676087

#SPJ1

Step 1: Arrange the arrays so that A and B are in the same order: A = [ 1 2 4 0 5 6 ], B = [ 7 3 2 5 1 9]

Step 2: To find C = A+B, add each element of A and B together.

C = [1+7, 2+3, 4+2, 0+5, 5+1, 6+9]

C = [8, 5, 6, 5, 6, 15]

Step 3: To find D = A-B, subtract each element of B from A.

D = [1-7, 2-3, 4-2, 0-5, 5-1, 6-9]

D = [-6, -1, 2, -5, 4, -3]

a) The domain and the range of the function are given as follows:

The graph of the function is given by the image presented at the end of the answer.

b) The trip was 5.1875 hours long.

The function for this problem is defined as follows:

g(t) = 23 - 3.2t.

The domain is the set of input values that can be assumed by the function. The time cannot have negative measures, hence the lower bound of the domain is of zero, while the gas cannot be negative, hence the upper bound of the volume is given as follows:

23 - 3.2t = 0

3.2t = 23

t = 23/3.2

t = 7.1875 hours.

The range is given by the set of all output values assumed the function, which are the values of the gas, hence it is [0,23].

The graph is a linear function between points (0, 23) and (7.1875, 0).

At the end of the trip there were 6.4 gallons left, hence the length of the trip is given as follows:

23 - 3.2t = 6.4

t = (23 - 6.4)/3.2

t = 5.1875 hours.

More can be learned about functions at https://brainly.com/question/24808124

#SPJ1

The probability that, out of 18 independent samples received from one river, just two were contaminated is 0.8438.

In the following 18 samples to be evaluated,

Let X = the number of samples that now the pollutant is present in.

Thus, with p = 0.10 and n = 18, X is a binomial random variable.

Using the binomial theorem:

[tex](^{n} _{r} ) p^{x} q^{n-x}[/tex]

p = 0.10

q = 1 - 0.10 = 0.9

n = 18

The likelihood that only two samples out of 18 obtained in different ways from the same river were polluted

P(x = 2) = [tex](^{18} _{2} ) (0.1)^{2} (0.9)^{18-2}[/tex]

=  [tex](^{18} _{2} ) (0.1)^{2} (0.9)^{16}[/tex]

= 153 x 0.01 x 0.1853

= 0.8438

Thus, the probability that, out of 18 separate samples received from one river, just two were contaminated is 0.8438.

Know more about the independent samples

https://brainly.com/question/12184795

#SPJ1

According to the question. A. No punctuation is missing.

Punctuation is the use of symbols to indicate the structure and organization of written language. It is used to help make the meaning of sentences clearer and to make them easier to read and understand. Punctuation marks can also be used to indicate pauses in speech, to create emphasis, and to indicate the speaker’s attitude. There are many different types of punctuation marks, each with its own purpose. The most commonly used punctuation marks are the period, comma, question mark, exclamation mark, quotation marks, and the apostrophe.

Quotation marks are used to enclose quoted material, while the apostrophe is used to indicate possession or to replace missing letters in a word or phrase. By using punctuation correctly, writers can ensure that their messages are correctly understood by their readers.

To learn more about punctuation

https://brainly.com/question/30321693

#SPJ1

The function represented by the table is linear, as it has a constant rate of change and is represented by a straight line.

Function in mathematics is a relation between two sets, where one set is the input and the other set is the output. Functions are an important tool in mathematics and can be used to describe and model real-world phenomena. Functions take inputs, manipulate them and produce outputs. They can be used to represent relationships between two or more variables, or to represent a complex process. Functions allow us to break down complex problems into smaller, more manageable pieces and to study how changes in one variable affect other variables.

The function represented by the table is linear. It can be determined by the fact that the y-values change by the same amount every time the x-values increase by one unit. In this case, the y-values decrease by 2 each time the x-values increase by one unit. This is an example of a linear function.

Linear functions have the shape of a straight line and are characterized by having a constant rate of change. The constant rate of change is represented by the slope of the line, which in this case is -2. This means that for every one unit increase in the x-values, the y-values decrease by two.

A quadratic function is the opposite of a linear function, as it has a rate of change that is not constant. Quadratic functions are characterized by their parabolic shape and their rate of change increases as x-values increase. Exponential functions are characterized by their curved shape and increase exponentially as x-values increase.

In conclusion, the function represented by the table is linear, as it has a constant rate of change and is represented by a straight line.

To know more about function click-
https://brainly.com/question/25841119
#SPJ1

The average rate of change on the intervals [0, 3], [3, 5], [5, 7], and [7, 9] are 2, -1.5, 1, and -1.5, respectively.

It expresses how much the function changed per unit on average during that time period. It is computed by taking the slope of the straight line connecting the interval's endpoints on the function's graph.

To calculate the average rate of change for the intervals shown in the graph, we must first determine the slope of the line connecting the endpoints of each interval.

0-3 interval:

Because the interval's endpoints are (0, 1) and (3, 7), the slope of the line connecting them is:

slope = (y change) / (x change) = (7 - 1) / (3 - 0) = 2

pauses [3, 5]:

Because the interval's endpoints are (3, 7) and (5, 4), the slope of the line connecting them is:

slope = (y change) / (x change) = (4 - 7) / (5 - 3) = -1.5

[5–7] Interval:

Because the interval's endpoints are (5, 4) and (7, 6), the slope of the line connecting them is:

slope = (y change) / (x change) = (6 - 4) / (7 - 5) = 1

Interval 7 and 9:

Because the interval's endpoints are (7, 6) and (9, 3), the slope of the line connecting them is:

slope = (y change) / (x change) = (3 - 6) / (9 - 7) = -1.5

As a result, the average rate of change on the intervals [0, 3], [3, 5], [5, 7], and [7, 9] is 2, -1.5, 1, and -1.5.

To know more about Average Rate visit:

https://brainly.com/question/23715190

#SPJ1

10% chance of contamination by a particular: It's not clear what random variable is being referred to here, but if it's the probability of contamination.

In general terms, a distribution refers to the way something is divided or spread out. In the context of statistics and probability theory, a distribution is a mathematical function that describes the likelihood of different possible outcomes or values that a variable can take.

There are various types of distributions, but some of the most commonly used ones include:

Normal distribution: also known as the Gaussian distribution, it is a continuous probability distribution that is symmetrical around the mean, with most of the data falling within one standard deviation of the mean.

Binomial distribution: this is a discrete probability distribution that describes the likelihood of a certain number of successes in a fixed number of trials.

Poisson distribution: another discrete probability distribution that describes the likelihood of a certain number of events occurring in a fixed interval of time or space.

Exponential distribution: a continuous probability distribution that describes the time between events occurring at a constant rate.

Distributions are essential in statistical analysis as they can help to understand and analyze data, make predictions, and draw conclusions about a population based on a sample of data.

Given by the question.

a. The wages of academician and non-academician workers in UPSI: This random variable can be approximated to a continuous distribution as wages can take on any numerical value within a range. However, it's worth noting that in practice, there may be discrete intervals or categories of wages, in which case a discrete distribution may be more appropriate.

b. The time taken to submit online quiz answer's document: This random variable can also be approximated to a continuous distribution as it can take on any numerical value within a range.

c. The prices of SAMSUNG mobile phones displayed at a phone shop: This random variable can be approximated to a continuous distribution as prices can take on any numerical value within a range.

d. The number of pumps at Shell petrol stations in Perak: This random variable can be approximated to a discrete distribution since the number of pumps can only take on integer values.

To learn more about function:

https://brainly.com/question/21145944

#SPJ1

Answer:

Step-by-step explanation:

This is an example of a hypergeometric distribution problem, where we have a population of 10,000 clock radios with 500 defective ones, and we want to calculate the probability of getting at least one defective radio in a random sample of 10 without replacement.

The probability of getting no defective radios in the sample is:

(9500/10000) * (9499/9999) * (9498/9998) * ... * (9491/9992)

This is because, for the first radio, there are 9500 good radios out of 10,000, and for the second radio, there are 9499 good radios out of 9,999, and so on.

The probability of getting at least one defective radio in the sample is then:

1 - (9500/10000) * (9499/9999) * (9498/9998) * ... * (9491/9992)

which is approximately equal to 0.401.

Therefore, the probability that the entire batch will be rejected is 0.401.

Uri paid a total of $85.47 for the landscaping service including tax and tip.

Taxes are compulsory payments made by a government organisation, whether local, regional, or federal, to people or businesses. Tax revenues are used to fund a variety of government initiatives, such as Social Security and Medicare as well as public infrastructure and services like roads and schools. Taxes are borne by whoever bears the cost of the tax in economics, whether this is the entity being taxed, such as a business, or the final users of the items produced by the firm. Taxes should be taken into consideration from an accounting standpoint, including payroll taxes, federal and state income taxes, and sales taxes.

Given that company charged $74 for the service plus 5% tax.

The tax is 5%, that is:

Tax = 5% of $74 = 0.05 x $74 = $3.70

Cost after tax = $74 + $3.70 = $77.70

Now, tip is 10%:

Tip = 10% of $77.70 = 0.10 x $77.70 = $7.77

Total cost = $77.70 + $7.77 = $85.47

Hence, Uri paid a total of $85.47 for the landscaping service including tax and tip.

Learn more about tax here:

https://brainly.com/question/16423331

#SPJ1

Answer:

30 pounds

Step-by-step explanation:

Since the jumper costs 50 pounds, the decimal for the number will be:

50.

To find ten percent of the number, you move the decimal one time to the LEFT.

Therefore, 10% of 50 pounds will be 5 pounds. To find 40%, we simply will multiply the 10% amount by 4.

40% of 50 will be:

20

Therefore, the jumper will have 20 pounds off.

Since the original cost is 50 pounds, we simply will just subtract 50 - 20:

50 - 20 = 30

The jumper will cost 30 pounds with the sale deal.

The cost of producing an additional 200 items due to increased demand is 180,000 Botswana Pula.

Marginal cost is the additional cost incurred by producing one additional unit of a good or service. In other words, it is the cost of producing one more unit of output.

The marginal cost (MC) equation given is MC = 2x - 100, where x is the number of units produced.

To find the cost of producing an additional 200 items due to increased demand, we need to calculate the marginal cost of producing these 200 items and then multiply that by 200.

The marginal cost of producing 200 additional items is given by:

MC(200) = 2(300 + 200) - 100

MC(200) = 2(500) - 100

MC(200) = 900

So the marginal cost of producing 200 additional items is 900. To find the total cost of producing these 200 items, we can simply multiply the marginal cost by the number of units produced, which in this case is 200:

Total cost = MC(200) × 200

Total cost = 900 × 200

Total cost = 180,000

Therefore, the cost of producing an additional 200 items due to increased demand is 180,000 Botswana Pula.

To know more about marginal cost visit:

https://brainly.com/question/1264758

#SPJ1

In respοnse tο the questiοn, we may say that As a result, FHJ stοck has equatiοn highest cοefficient οf variatiοn, with a value οf arοund 4.33%.

In mathematics, an equatiοn is a statement that expresses the equality οf twο expressiοns. Equatiοn is made up οf twο sides that are jοined by the algebraic symbοl (=). Fοr example, in this argument, it is asserted that "2x + 3 = 9" denοtes that "2x plus 3" equals the number "9".

Equatiοn sοlving is the prοcess οf determining the value(s) οf the variable(s) required fοr the equatiοn tο be true. There are many different kinds οf equatiοns, such as regular and nοnlinear οnes with οne οr mοre elements. This fοrmula raises the variable x tο the secοnd pοwer: "x² + 2x - 3 = 0." Lines are used in the study οf mathematics in the fields οf algebra, calculus, and geοmetry.

The cοefficient οf variatiοn (CV) represents the standard deviatiοn as a percentage οf the mean and is a relative measure οf variability. It is cοmputed as fοllοws:

CV = (standard deviatiοn / mean) multiplied by 100%

Tο determine which οf the three stοcks has the highest cοefficient οf variatiοn, we must cοmpute the CV fοr each and cοmpare the results.

Fοr ACE inventοry:

CV = (1.5 / 37.03) x 100% ≈ 4.05%

In the case οf FHJ stοck:

CV = (2.62 / 60.55) x 100% ≈ 4.33%

In the case οf LMP stοck:

CV = (3.06 / 124.9) x 100% ≈ 2.45%

As a result, FHJ stοck has the highest cοefficient οf variatiοn, with a value οf arοund 4.33%.

To know more about equation visit:

brainly.com/question/649785

#SPJ1

Based on the information in the image, the values of the symbols in order would be: 5, 9.86, 9.93, 7.91. 10.56.

To find the equivalent value of each symbol we must apply the Pythagorean theorem and find the value of the hopotenuse of all triangles as shown below:

Triangle 1:

Triangle 2:

Triangle 3:

Triangle 4:

Triangle 5:

According to the above, the values of the symbols in order would be:

5, 9.86, 9.93, 7.91. 10.56.

Learn more about triangles in: https://brainly.com/question/2773823

#SPJ1

Answer: The answer is D

Step-by-step explanation:

Pythagorean theorem: a²+b²=c²

x²+x²=14²

2x²=196

Evaluate...

x=7√2