Please help me answer this question ASAP!!
Will mark as brainliest if correct and 50+ points!

The displacement of the block at any time t is then x= 0.05cos5tm. (option b).

Now, when the block is released, it starts oscillating back and forth about its equilibrium position due to the force exerted by the spring. This motion is described by the equation of motion for a simple harmonic oscillator:

x = Acos(ωt + φ)

The angular frequency ω of the oscillation is given by:

ω = √(k/m)

where k is the spring constant and m is the mass of the block.

Substituting the given values of k and m, we get:

ω = √(50/2) = 5 rad/s

The phase angle φ depends on the initial conditions of the system, i.e., the initial displacement and velocity of the block. Since the block is initially at rest, its initial velocity is zero and the phase angle is zero as well.

Therefore, the equation of motion for the displacement of the block is:

x = 0.05cos(5t)

Hence, option B, x = 0.05cos(5t), is the correct answer.

To know more about displacement here

https://brainly.com/question/24642562

#SPJ4

Answer:

Step-by-step explanation:

Using a standard normal table, we can find the area under the curve between -2.11 and -0.85.

P(-2.11 < z < -0.85) = P(z < -0.85) - P(z < -2.11)

Using the table, we find:

P(z < -0.85) = 0.1977

P(z < -2.11) = 0.0174

Therefore,

P(-2.11 < z < -0.85) = 0.1977 - 0.0174 = 0.1803

So the probability that a standard normal random variable falls between -2.11 and -0.85 is 0.1803.

Step-by-step explanation:

remember the trigonometric triangle inside a circle.

sine is the up/down leg, cosine is the left/right leg.

the Hypotenuse (baseline) of the right-angled triangle is the angle-defining radius of the circle.

this is the basic definition inside the norm-circle with radius = 1.

for any other size sine and cosine need to be multiplied by the actual radius for the actual triangle side lengths.

I think you need the answer in simplified fraction and square root notification (you cut that off), but I give you also the decimal result, just in case.

so,

78 = cos(30)×y

78 = (sqrt(3)/2) × y

y = 78 / (sqrt(3)/2) = 2×78/sqrt(3) = 156/sqrt(3) =

= 90.06664199...

x = sin(30) × y = 0.5 × 156/sqrt(3) = 78/sqrt(3) =

= 45.033321...

Answer :

Step-by-step explanation to problem:

2/3 * 3 = 2

we do 2/3 times 3 because $3 is for 1 pound and here we only need 2/3 of a pound

$2

Correct Answer = D

Answer:

A

Step-by-step explanation:

∠ o and ∠ z are alternate exterior angles and are congruent, that is

∠ z = ∠ o = 125°

the correct options are A), B), and E).

why it is and what is Gallon?

A) 2 quarts = 8 cups

B) 8 cm = 80mm

E) 96 inches = 8 feet

The number 8 cannot correctly fill in the blank for statements C and D.

C) 1 gallon = 16 cups, so 4 gallons = 64 cups, not 8 cups.

D) 1 hour = 60 minutes, so 96 minutes = 1 hour and 36 minutes, not 8 hours.

Therefore, the correct answers are A), B), and E).

A gallon is a unit of measurement for volume commonly used in the United States and some other countries. There are two different sizes of gallons: the US gallon and the imperial gallon.

The US gallon is defined as exactly 3.785411784 liters, and is used for measuring liquids such as gasoline, milk, and other beverages.

The imperial gallon, which is used in the United Kingdom and some other countries, is defined as exactly 4.54609 liters.

In both cases, a gallon is typically divided into smaller units such as quarts, pints, and fluid ounces for measuring smaller amounts of liquid.

To know more about Filling related questions, visit:

https://brainly.com/question/29555029

#SPJ1

The given statement 'to calculate the average of the numeric values in a list  the first step is to get the sum of all the given values ' is a true.

Average of the numeric values in a list,

First step is to get the sum of values in the list.

It is not the total number of values.

Once we have the sum, we can divide it by the number of values to get the average.

Here is an example,

Suppose we have a list of numeric values are as follow,

[2, 4, 6, 8, 10].

To calculate the average of these values, we first find their sum,

2 + 4 + 6 + 8 + 10 = 30

Next,

divide the sum by the number of values in the list

Number of values = 5

30 / 5 = 6

This implies,

The average of the values in the list is 6.

Therefore, to get the average first step is to get the total of all values is true statement.

Learn more about average here

brainly.com/question/29635181

#SPJ4

The cost to rent one shed of the rectangular prism shaped shed is $2772.

The size of a section on a surface is determined by its area. Surface area refers to the area of an open surface or the border of a three-dimensional object, whereas the area of a plane region or plane area refers to the area of a shape or planar lamina.

A rectangular prism is a polyhedron in geometry that has two parallel and congruent sides. It also goes by the name cuboid. Six faces, each with a rectangle form and twelve edges, make up a rectangular prism. It is referred to as a prism because of the extent of its cross-section.

Volume of prism= BH

where B= area of base and H= height

B= 11*7 = 77 feet²

H= 12 feet

Volume= 77*12=924 cubic feet

Cost =$3 per cubic foot

Total cost= 3*924= $2772

To know more about area, visit

https://brainly.com/question/27683633

#SPJ1

Toward the end of a game of Scrabble, you hold the letters D, O, G, and Q. You can choose 3 of these 4 letters and arrange them in order in 24 different ways.

To solve this problem, we need to use the concept of permutations. A permutation is an arrangement of objects in a specific order. In this case, we need to find the number of permutations that can be made from the letters D, O, G, and Q when we choose 3 of these 4 letters.

The formula for finding the number of permutations is:

n! / (n-r)!

where n is the total number of objects and r is the number of objects we choose.

Using this formula, we can calculate the number of permutations as follows:

4! / (4-3)!

= 4! / 1!

= 4 x 3 x 2 x 1 / 1

= 24

Therefore, we can arrange the chosen 3 letters in 24 different ways.

To learn more about permutations click on,

https://brainly.com/question/30660588

#SPJ4

two fractions with a common denominator of 8 can be expressed in the form of a/b and c/8, where a and c are integers. As long as a and c are not both multiples of 8  then these fractions would have a common denominator of 8.

A number that can be divided exactly by all of the denominators in a group of fractions is referred to as a common denominator. 2. A noun that counts. A trait or attitude that all members of a group share is known as a common denominator.

Since the two fractions have a common denominator of 8, they can be written in the form of a/b and c/8, where a and c are integers.

There are many possible combinations of integers that could satisfy this condition. Here are some examples:

1/8 and 3/8

2/8 (which simplifies to 1/4) and 6/8 (which simplifies to 3/4)

4/8 (which simplifies to 1/2) and 7/8

5/8 and 2/8 (which simplifies to 1/4)

3/8 and 4/8 (which simplifies to 1/2)

In general, any two fractions with a common denominator of 8 can be expressed in the form of a/b and c/8, where a and c are integers. As long as a and c are not both multiples of 8  then these fractions would have a common denominator of 8.

To know more about common denominator  visit:

https://brainly.com/question/29775115

#SPJ1

Answer:

Devan's age = 2 years.

Deepa's age = 6 years.

Step-by-step explanation:

Present age:      

 Let the present age of Devan = x

             Present age of Deepa = 3x

After 2 years:

                     Age of Devan = x + 2

                     Age of Deepa = 3x + 2

     Deepa's age = 2* Devan's age

          3x + 2        = 2 *(x + 2)

                3x + 2  = 2x + 2*2    {Use distributive property}

               3x + 2   = 2x + 4

  Subtract '2' from both sides,

                           3x = 2x + 4 - 2

                           3x = 2x + 2

Subtract '2x' from both sides,

                   3x  - 2x = 2

                             x = 2

Devan's age = 2 years.

Deepa's age = 3*2

                      = 6 years  

The result of the formula  [tex]12 - 3y2 + (v=4) / (2y - 2)[/tex] for y = 3 is  [tex]-29/2[/tex]  .

When [tex]y = 3[/tex] is used, the value of the expression [tex]12 - 3y2 + (v=4) / (2y - 2)[/tex]  has a value of  [tex]-29/2[/tex] .

To analyse an algebraic expression is to determine its value when a certain number is used in lieu of the variable. To evaluate the expression, we first replace the variable with the given number, then we use the order of operations to simplify the expression.

If  [tex]y = 3[/tex] , we can insert it into the expression & simplify as follows to evaluate   [tex]12 - 3y2 + (v=4) / (2y - 2)[/tex] for  [tex]y = 3[/tex]  .

[tex]12 - 3(3)^2 + (√4) / (2(3) - 2)[/tex] (y = 3 replacement)

[tex]12 - 27 + 2 / 4\s-15 + 1/2\s-29/2[/tex]

Therefore, The result of the formula  [tex]12 - 3y2 + (v=4) / (2y - 2)[/tex] for y = 3 is  [tex]-29/2[/tex]  .

Learn more about expression here:

https://brainly.com/question/953809

#SPJ1

(a) 12 cm 40° : Area of shaded segments = 301.44 sq. cm.

(b) 58° 16 cm ​: Area of shaded segments = 777.04 sq. cm.

Two radii that meet at the center to form a sector define a circle. The sector is the portion of the circle created by these two radii. Knowing a circle's central angle calculation and radius measurement are both crucial for solving circle-related difficulties.

Area of sector of circle = Ф/360 * πr²

π = 3.14

r  is the radius

Ф is the angle subtended.

(a) 12 cm 40°

Area of shaded segments = 40/60 * 3.14* 12²

Area of shaded segments = 40/60 * 452.16

Area of shaded segments = 301.44 sq. cm.

(b) 58° 16 cm ​

Area of shaded segments = 58/60 * 3.14* 16²

Area of shaded segments = 58/60 * 803.84

Area of shaded segments = 777.04 sq. cm.

Know more about the sector of circle

https://brainly.com/question/22972014

#SPJ1

The diagram for the question is attached.

The value of the probability is 0.3125 and this is proved by the calulations below

The probability of getting exactly 3 heads in 5 coin tosses can be calculated by multiplying the probability of one specific combination of 3 heads and 2 tails by the number of possible combinations.

The probability of one specific combination, for example HHTTT, is (1/2)^5 = 1/32, because each toss has a 1/2 chance of being a head or a tail.

There are 5C3 = 10 possible combinations of 3 heads and 2 tails in 5 tosses.

For example: HHTTT, HTHTT, HTTHT, HTHHT, TTHHH, etc.

Therefore, the probability of getting exactly 3 heads is:

Probability = 10 * (1/32)

Probability = 10/32

Probability = 0.3125.

Hence, the value of the probability is 0.3125.

Read more about probability at

https://brainly.com/question/24756209

#SPJ1

The given statement " when the population variance is not known (i.e., must be estimated from data), we use a z-statistic instead of a t-statistic for our hypothesis tests. " is false. Because in distribution of sample means, population variance is unknown.

When the population variance is not known and must be estimated from the data, we use a t-statistic instead of a z-statistic for our hypothesis tests.

This is because the distribution of the sample means follows a t-distribution when the population variance is unknown, whereas it follows a standard normal distribution (z-distribution) when the population variance is known.

The t-distribution has fatter tails than the z-distribution to account for the extra uncertainty introduced by estimating the population variance from the sample.

To know more about hypothesis tests:

https://brainly.com/question/30588452

#SPJ4

Answer:

x = [tex]\frac{7\pi }{6}[/tex], [tex]\frac{11\pi }{6}[/tex]  or x = 210°, 330°

Step-by-step explanation:

4sin(x) + 2 = 0

4sin(x) = -2

sin(x) = -1/2

x = [tex]\frac{7\pi }{6}[/tex], [tex]\frac{11\pi }{6}[/tex]

f(x) = (x+4)^2(x-3) has polynomial function with the following zeros: double zero at -4 simple zero at 3.

If a polynomial has a double zero at -4, it means that it can be factored as (x+4)^2.

If it also has a simple zero at 3, then the factorization must include (x-3).

Therefore, the polynomial function with these zeros is :-

f(x) = (x+4)^2(x-3)

This polynomial has a double zero at -4, because $(x+4)^2$ has a zero of order 2 at -4, and a simple zero at 3, because $(x-3)$ has a zero of order 1 at 3.

To know more about polynomial-

brainly.com/question/11536910

#SPJ4

Answer:

No diagram provided here

The measure of the angle A is 49.99 degrees or 50 degrees if the length of AB = 14 and AC = 9.

Trigonometry is a branch of mathematics that deals with the relationship between sides and angles of a right-angle triangle.

We have a given a right angle triangle in the picture

It is required to find the measure of angle A

Applying cos ratio to find the measure of the angle A:

cosA = 9/14

cosA = 0.642

A = 49.99 ≈ 50 degree

Thus, the measure of the angle A is 49.99 degrees or 50 degrees if the length of AB = 14 and AC = 9.

Learn more about trigonometry here:

https://brainly.com/question/26719838

Answer:

Step-by-step explanation:

The slope of a line is the measure of the steepness and the direction of the line. Finding the slope of lines in a coordinate plane can help in predicting whether the lines are parallel, perpendicular, or none without actually using a compass.

The slope of any line can be calculated using any two distinct points lying on the line. The slope of a line formula calculates the ratio of the "vertical change" to the "horizontal change" between two distinct points on a line. In this article, we will understand the method to find the slope and its applications.

That is what Slope is.

Answer:

Step-by-step explanation:

Slope :( 1,1)

You start on the y-axis point which is (0,1) as you can see it is going up so I used the “up left” strategy. You go up 1 to the left 1 since the line intersects at point (1,2)

Answer:

C) ∠1 ≅ ∠7

Step-by-step explanation:

If ∠1 = ∠3, then ∠3 = ∠7, behind there is written ∠1 = ∠3, so it's A) ∠1 = ∠7.

Roberto needs 4 square yards of fabric to make his costume.

A fraction that has the numerator higher than or equal to the denominator is said to be inappropriate. For instance, the fraction 7/3 is incorrect since 7 is bigger than 3. Mixed numbers, which combine a whole number and a correct fraction, can be created from improper fractions.

Given that, piece of fabric that is 2 2/3 yards long and 1 1/2 yard wide.

Convert the length from a mixed number to an improper fraction:

2 2/3 = (2 x 3 + 2)/3 = 8/3

1 1/2 = 3/2

The area of the rectangle is:

Area = Length x Width

Substituting the values we have:

Area = (8/3) x (3/2) = 4

Hence, Roberto needs 4 square yards of fabric to make his costume.

Learn more about improper fraction here:

https://brainly.com/question/29292275

#SPJ1

The number of hours it will take the same dog to run 26 1/10 miles is 7.2 hours

7 1/4 miles in 2 hours

26 1/10 miles in x hours

Equate miles ratio hours

7 ¼ miles : 2 hours = 26 ⅒ miles : x hours

7.25 / 2 = 26.10 / x

cross product

7.25 × x = 26.10 × 2

7.25x = 52.20

divide both sides by 7.25

x = 52.20 / 7.25

x = 7.2 hours

Ultimately, it will take 7.2 hours for the dog to run 26⅒ miles.

Read more on ratio:

https://brainly.com/question/2328454

#SPJ1

Answer: D) Angle R is 65 degrees

Step-by-step explanation:

In the given figure, we have a right-angled triangle PQR.

Using the property of angles in a triangle, we know that the sum of angles in a triangle is 180 degrees. Therefore,

∠QRP + ∠QPR + ∠PRQ = 180 degrees

Since ∠PRQ is a right angle (90 degrees), we have:

∠QRP + ∠QPR = 90 degrees

Now, we are given that ∠QPR is 25 degrees. Substituting this in the above equation, we get:

∠QRP + 25 = 90 degrees

Solving for ∠QRP, we get:

∠QRP = 90 - 25 = 65 degrees

Therefore, the measure of angle R is 65 degrees, which is option (D).

Answer:

Answer is D

Step-by-step explanation:

SPiDerMom is so hot bTw

(a) T is one-to-one if and only if T carries linearly independent subsets of V onto linearly independent subsets of W.

(b) If T is one-to-one, then S is linearly independent if and only if T(S) is linearly independent.

(c) If β is a basis for V and T is one-to-one and onto, then T(β) is a basis for W.

(a) Assume T is one-to-one. Let S be a linearly independent subset of V, and suppose T(S) is linearly dependent. Then there exist distinct vectors s1, s2, ..., sn in S such that T(s1), T(s2), ..., T(sn) are linearly dependent. This means that there exist scalars c1, c2, ..., cn, not all zero, such that c1T(s1) + c2T(s2) + ... + cnT(sn) = 0. Since T is linear, we have T(c1s1 + c2s2 + ... + cnsn) = 0. But since T is one-to-one, this implies that c1s1 + c2s2 + ... + cnsn = 0, contradicting the assumption that S is linearly independent. Hence, T(S) must be linearly independent.

Conversely, assume that T carries linearly independent subsets of V onto linearly independent subsets of W. Let v1 and v2 be distinct vectors in V, and suppose T(v1) = T(v2). Then {v1, v2} is linearly dependent, which implies that there exist scalars c1 and c2, not both zero, such that c1v1 + c2v2 = 0. Applying T to both sides yields c1T(v1) + c2T(v2) = 0, which implies that T(v1) and T(v2) are linearly dependent. This contradicts the assumption that T carries linearly independent subsets of V onto linearly independent subsets of W. Hence, T must be one-to-one.

(b) Assume T is one-to-one and let S be a subset of V. Suppose S is linearly independent and that T(S) is linearly dependent. Then there exist distinct vectors s1, s2, ..., sn in S such that T(s1), T(s2), ..., T(sn) are linearly dependent. This means that there exist scalars c1, c2, ..., cn, not all zero, such that c1T(s1) + c2T(s2) + ... + cnT(sn) = 0. Since T is linear, we have T(c1s1 + c2s2 + ... + cnsn) = 0. But since T is one-to-one, this implies that c1s1 + c2s2 + ... + cnsn = 0, contradicting the assumption that S is linearly independent. Hence, T(S) must be linearly independent.

Conversely, assume that T(S) is linearly independent whenever S is a linearly independent subset of V. Let v1 and v2 be distinct vectors in V, and suppose T(v1) = T(v2). Then {v1, v2} is linearly dependent, which implies that there exist scalars c1 and c2, not both zero, such that c1v1 + c2v2 = 0. Since {v1, v2} is linearly dependent, we have either v1 = 0 or v2 = 0. Without loss of generality, assume v1 = 0. Then T(v1) = 0 = T(v2), and hence T({v1, v2}) = {0} is linearly dependent. This contradicts the assumption that T carries linearly independent subsets of V onto linearly independent subsets of W. Hence, S must be linearly independent.

(c) First, we will show that T(β) spans W. Let w be an arbitrary vector in W. Since T is onto, there exists some vector v in V such that T(v) = w. Since β is a basis for V, there exist scalars c1, c2, ..., cn such that v = c1v1 + c2v2 + ... + cnvn. Applying T to both sides, we have w = T(v) = T(c1v1 + c2v2 + ... + cnvn) = c1T(v1) + c2T(v2) + ... + cnT(vn), which implies that T(β) spans W.

Next, we will show that T(β) is linearly independent. Suppose there exist scalars c1, c2, ..., cn such that c1T(v1) + c2T(v2) + ... + cnT(vn) = 0. Applying T to both sides, we have T(c1v1 + c2v2 + ... + cnvn) = 0. But since T is one-to-one, this implies that c1v1 + c2v2 + ... + cnvn = 0, which implies that c1 = c2 = ... = cn = 0, since β is a basis for V. Hence, T(β) is linearly independent.

Since T(β) spans W and is linearly independent, it is a basis for W. Therefore, if β is a basis for V and T is one-to-one and onto, then T(β) is a basis for W.

Learn more about linearly independent subsets here

brainly.com/question/14292641

#SPJ4

In response to the stated question, we may state that The equivalent trigonometry expression of 7/tan b + 7tan b is (7 - 7tan b cot b)/sin b.

The study of the connection between triangle side lengths and angles is known as trigonometry. The concept first originated in the Hellenistic era, during the third century BC, due to the application of geometry in astronomical investigations. The subject of mathematics known as exact techniques deals with certain trigonometric functions and their possible applications in calculations. There are six commonly used trigonometric functions in trigonometry. Sine, cosine, tangent, cotangent, secant, and cosecant are their separate names and acronyms (csc). The study of triangle characteristics, particularly those of right triangles, is known as trigonometry. As a result, geometry is the study of the properties of all geometric forms.

tan(A + B) = (tan A + tan B)/(1 - tan A tan B)

Set A = 90 degrees and B = b degrees:

tan(90 + b) = (tan 90 + tan b)/(1 - tan 90 tan b)

tan(90 + b) = (undefined + tan b)/(1 - undefined tan b)

tan(90 + b) = -cot b

7/tan b + 7tan b

= 7/(tan b) + 7(tan(90 + b) - 1)

= 7/(tan b) + 7(-cot b - 1)

= (7 - 7tan b cot b)/sin b

The equivalent expression of 7/tan b + 7tan b is (7 - 7tan b cot b)/sin b.

To know more about trigonometry visit:

https://brainly.com/question/29002217

#SPJ1

Answer:

Answer: B. Symmetric.

Explanation:

In a symmetric distribution, the data is evenly distributed around the mean or median, creating a mirror image on both sides of the center. In this histogram, the median and mean are very close together at 55 and the bars on both sides of the center are roughly equal in height, indicating a fairly even distribution. Therefore, the histogram is symmetric.

Parameterizing a surface over a rectangle Parameterizing the surface z = x²+2y² over the rectangular region R defined by -3 ≤ x ≤ 3, −1 ≤ y ≤ 1 are falls under the range of R.

Let's start by expressing x and y as functions of u and v. Since x varies between -3 and 3 over R, we can use the following parameterization for x:

x = u

where u varies between -3 and 3. Similarly, since y varies between -1 and 1 over R, we can use the following parameterization for y:

y = v

where v varies between -1 and 1.

Next, we can use these parameterizations for x and y to express z as a function of u and v. Substituting x = u and y = v into the equation z = x² + 2y², we get:

z = u² + 2v²

So, the parameterization of the surface z = x² + 2y² over the rectangular region R is given by:

x = u, y = v, z = u² + 2v²

where -3 ≤ u ≤ 3 and -1 ≤ v ≤ 1.

The parameterization allows us to study various properties of the surface z = x² + 2y² over the rectangular region R.

To know more about surface area here

https://brainly.com/question/27784309

#SPJ4

Complete Question:

Parameterizing a surface over a rectangle Parameterizing the surface z = x²+2y² over the rectangular region R defined by -3 ≤ x ≤ 3, −1 ≤ y ≤ 1.