Answers
Answer: c????????
Explanation:
Related Questions
CH4 +2H2S = CS2+ 4H2
If the reaction shifts to the right what are the products?
If the reaction shifts to the right, which chemicals decrease in The process?
If the reaction shifts to the left what are the products?
If the reaction shifts to the left, which chemicals decrease in the process?
Answers
Calculate the specific heat capacity for bone based on the above data. Show your work.
Answers
Answer:
What above data?
Explanation:
There is no data to be seen here.
4 NH3 (g) + 7 O2 (g) 4 NO2 (g) + 6 H2O (g)
The combustion of 28.8 g of ammonia consumes __________ g of oxygen.
Answers
Answer:
21
Explanation:
If 1.00 g of KCl is completely dissolved in 24.5 g of water, what is the percent composition (by mass) of the solution that is formed?
Answers
Answer:
3.92%
Explanation:
The solution that is formed is of KCl in water. This means that the percent composition by mass is given by the formula:
Mass of KCl / Mass of Solution * 100%We now calculate the mass of solution:
Mass of Solution = Mass of KCl + Mass of Water = 1.00 g + 24.5 gMass of Solution = 25.5 gFinally we calculate the percent composition:
1.00 g / 25.5 g * 100% = 3.92%If 36.0 g of NaOH (MM = 40.00 g/mol) are added to a 500.0 mL volumetric flask, and water is added to fill the flask, what is the concentration of NaOH in the resulting solution
Answers
Answer:
Molarity of NaOH = 1.8 M.
Explanation:
From the question given above, the following data were obtained:
Mass of NaOH = 36 g
Molar mass of NaOH = 40 g/mol
Volume = 500 mL
Molarity of NaOH =?
Next, we shall determine the number of mole in 36 g of NaOH. This can be obtained as follow:
Mass of NaOH = 36 g
Molar mass of NaOH = 40 g/mol
Mole of NaOH =?
Mole = mass / molar mass
Mole of NaOH = 36 / 40
Mole of NaOH = 0.9 mole
Next, we shall convert 500 mL to L. This can be obtained as follow:
1000 mL = 1 L
Therefore,
500 mL = 500 mL × 1 L / 1000 mL
500 mL = 0.5 L
Finally, we shall determine the molarity of NaOH. This can be obtained as follow:
Mole of NaOH = 0.9 mole
Volume = 0.5 L
Molarity of NaOH =?
Molarity = mole / Volume
Molarity of NaOH = 0.9 / 0.5
Molarity of NaOH = 1.8 M
A 35 Liter tank of Oxygen is at 315 K with an internal pressure of 190 atmospheres. How many moles of gas does the tank contain?
Answers
Using your freshly made 5M stock aqueous solution of NaCl and your 10% aqueous stock of SDS, you find a prepackaged bottle of 1M Tris-Hcl (aqueous solution) along with a 95% solution of liquid NP-40 in a bottle. Using these stock reagents calculate the amount needed for the following final concentrations for each reagent as well as the final volume of water needed to obtain:
Total Final volume of 500 mL
Final Concentrations:
150 mM NaCl
50 mM Tris-HCl
1% NP-40 .
1% SDS
Answers
Answer:
1. Volume of stock required = 15 mL
Volume of water required = 485 mL
2. Volume of stock required = 5 mL
Volume of water required = 495 mL
3. Volume of stock required = 5.30 mL
Volume of water required = 494.70 mL
4. Volume of stock required = 50 mL
Volume of water required = 450 mL
Explanation:
Using the dilution formula C₁V₁ = C₂V₂
Where C₁ = initial concentration; C₂ = final concentration; V₁ = initial volume; V₂ = final volume
1. C₁ = 5 M NaCl, C₂ = 150 mM NaCl = 0.15 M NaCl
V₁ = ?; V₂ = 500 mL
V₁ = C₂V₂/C₁
V₁ = 0.15 × 500/ 5 = 15 mL
Volume of stock required = 15 mL
Volume of water required = 500 mL - 15 mL
Volume of water required = 485 mL
2. C₁ = 1 M Tris-HCl, C₂ = 50 mM Tris-HCl = 0.05 M Tris-HCl
V₁ = ?; V₂ = 500 mL
V₁ = C₂V₂/C₁
V₁ = 0.05 × 500/ 5 = 5 mL
Volume of stock required = 5 mL
Volume of water required = 500 mL - 5 mL
Volume of water required = 495 mL
3. C₁ = 95% NP-40, C₂ = 1% NP-40
V₁ = ?; V₂ = 500 mL
V₁ = C₂V₂/C₁
V₁ = 1 × 500/ 95 = 5.30 mL
Volume of stock required = 5.30 mL
Volume of water required = 500 mL - 5.30 mL
Volume of water required = 494.70 mL
4. C₁ = 1% SDS, C₂ = 10% SDS
V₁ = ?; V₂ = 500 mL
V₁ = C₂V₂/C₁
V₁ = 1 × 500/ 10 = 50 mL
Volume of stock required = 50 mL
Volume of water required = 500 mL - 50 mL
Volume of water required = 450 mL
A sample of polonium-210 has an initial mass of 390 milligrams (mg). If the half-life of polonium-210 is 36 days, how many mg of the sample remains after 72 days?
A.
392 mg
B.
195 mg
C.
97.5 mg
D.
48.75 mg
Answers
Answer: D. 48.75
Explanation: just took the test
Answer:
D
Explanation:
I got this question right on my test.
how real gases differ from ideal gases?
Answers
An ideal gas is one that follows the gas laws at all conditions of temperature and pressure. To do so, the gas would need to completely abide by the kinetic-molecular theory. On the other hand, a real gas is a gas that does not behave according to the assumptions of the kinetic-molecular theory.
Furthermore, the particles of an ideal gas are extremely small and have a mass equivalent to practically zero. Ideal gas particles also have no volume.
An example of a real gas is helium, oxygen, and nitrogen.
Select the correct answer.
What quantity might be measured in units of kilograms?
A.
the brightness of a candle
B.
the volume of a bottle
C.
the mass of a marble
D.
the electric current in a wire
Answers
Answer:
The mass of a marble.
Explanation:
Units of the other answers:
A: Light - Lumen (lm)
B: Volume - cm^3
D: Electric current - Ampere
16. Given the unbalanced equation:
_Al + CuSO4 → _A1,(SO2), + --Cu
When the equation is balanced using
the smallest whole-number coefficients,
what is the coefficient of AI?
(1) 1 (2) 2 (3) 3
(4) 4
Answers
Explanation:
Consider matrix A.
What is the inverse of A? Fill in the missing elements in the matrixs.Consider matrix A.
What is the inverse of A? Fill in the missing elements in the matrixs.
(2) 2.
Explanation:
2Al + 3CuSO4 → Al2(SO4)3 + 3Cu
Hence, now yet it's balanced chemical equation.
What is the empirical formula for a compound if a 2.50g sample contains 0.900g of calcium and 1.60g
of chlorine? (3pts]
Answers
Answer:
CaCl₂
Explanation:
First we convert the given masses of elements into moles, using their respective molar masses:
0.900 g Ca ÷ 40 g/mol = 0.0225 mol Ca1.60 g Cl ÷ 35.45 g/mol = 0.045 mol ClNow we divide those numbers of moles by the lowest value among them:
0.0225 mol Ca / 0.0225 mol = 10.045 mol Cl / 0.0225 mol = 2Meaning the empirical formula for the compound is CaCl₂.
Mechanical digestion begins in the_____ and involves physical processes, such as chewing.
Answers
Answer:
begins in the mouth
I need the correct answers
Answers
Answer:
Acids: Tastes Sour
Has a ph less than 7
Base: Bitter
Has a ph greater than 7
slippery
Acid&Base: Conducts electricity
Tastes sour
Has a ph less than 7
Bases
Tastes bitter
Has a ph more than 7
Feels slippery
Acids and bases
Conducts electricity
A compound containing phosphorus and oxygen has a molar mass of 157.9 g/mol and an empirical formula of PO3 .
Answers
Answer: The molecular formula of the compound is [tex]P_2O_6[/tex]
Explanation:
The molecular formula is the chemical formula that tells about the number of atoms of each element present in a compound. Molecular formula and empirical formula can also be the same when the number of atoms is in the simplest whole-number ratio.
To calculate the molecular formula, the number of atoms of the empirical formula is multiplied by a factor known as valency that is represented by the symbol, 'n'.
[tex]n=\frac{\text{Molecular mass}}{\text{Empirical mass}}[/tex] ...(1)
Given empirical formula is [tex]PO_3[/tex]
Empirical mass = [tex][(1\times 30.97) + (3\times 15.99)]=78.94 g/mol[/tex]
Molecular mass = 157.9 g/mol
Plugging values in equation 1:
[tex]n=\frac{157.9 g/mol}{78.94g/mol}\\\\n=2[/tex]
Molecular formula of the compound becomes [tex]P_{2\times 1}O_{2\times 3}=P_2O_6[/tex]
Hence, the molecular formula of the compound is [tex]P_2O_6[/tex]
HOW MANY MOLES OF CS2 FORMS WHEN 2.7 MOLE C REACTS
Answers
Based on the molar masses. how can you tell that an equation is balanced
Answers
Air trapped in a cylinder fitted with a piston occupies 142.8 mL at 0.97 kPa pressure.
What is the new volume of air when the pressure is increased to 1.5 kPa by applying force
to the piston?
Answers
Answer:
92.344mL
Explanation:
acording to boyle's law that PV=constant then P1V1=P2V2
Which statement best defines the term innate behavior?
behavior that is taught through watching others
behavior that is simple, untaught, and born knowing
behavior that is taught through both good and bad experiences
behavior that is untaught but very complex
Answers
Answer: behavior that is simple, untaught, and born knowing
Have a nice dam day!!
The term that describes innate behavior is:
D. behavior that is untaught but very complex
What does innate behavior stand for?Intr-insic or "intuitive" ways of behaving are innate and don't need learning or related knowledge to be performed. Models incorporate romance and ways of behaving, departure and guarded moves, and hostility. Movement and Migration Innate or ins-tinctual behaviors rely on response to sti-muli.
Thus, option D is correct.
Find more information about Innate behavior here:
brainly.com/question/14311636
name the process which takes place when propene gas molecules are converted into a giant molecule
Answers
Answer:
Polymerization, any process in which relatively small molecules, called monomers, combine chemically to produce a very large chainlike or network molecule, called a polymer. The monomer molecules may be all alike, or they may represent two, three, or more different compounds.
Carbon-11 decays by position emission.The nuclide formed product is
Answers
Answer:
They demonstrated that carbon-11 decays by positron emission to the stable nuclide 11B [Eq. (1)].
What mass of iron(III) oxide will be formed if 9.30 L of oxygen at STP react with excess iron?
Answers
Answer:
12
Explanation:
because that plot and the iron
A 25.0 mL NaOH solution of unknown concentration was titrated with a 0.189 M HCl solution. 19.6 mL HCl was required to reach the equivalence point. In a separate titration, a 10.0 mL H3PO4 solution was titrated with the same NaOH solution. This time, 34.9 mL NaOH was required to reach the equivalence point. What is the concentration of the H3PO4 solution
Answers
Answer:
0.172 M
Explanation:
The reaction for the first titration is:
HCl + NaOH → NaCl + H₂OFirst we calculate how many HCl moles reacted, using the given concentration and volume:
19.6 mL * 0.189 M = 3.704 mmol HClAs one HCl mol reacts with one NaOH mol, there are 3.704 NaOH mmoles in 25.0 mL of solution. With that in mind we determine the NaOH solution concentration:
3.704 mmol / 25.0 mL = 0.148 MAs for the second titration:
H₃PO₄ + 3NaOH → Na₃PO₄ + 3H₂OWe determine how many NaOH moles reacted:
34.9 mL * 0.148 M = 5.165 mmol NaOHThen we convert NaOH moles into H₃PO₄ moles, using the stoichiometric coefficients:
5.165 mmol NaOH * [tex]\frac{1mmolH_3PO_4}{3mmolNaOH}[/tex] = 1.722 mmol H₃PO₄Finally we determine the H₃PO₄ solution concentration:
1.722 mmol / 10.0 mL = 0.172 MA sample of polonium-210 has an initial mass of 390 milligrams (mg). If the half-life of polonium-210 is 36 days, how many mg of the sample remains after 36 days?
A.
48.75 mg
B.
392 mg
C.
97.5 mg
D.
195 mg
Answers
Answer:
d
Explanation:
The more energy that particles have, the ___ they move.
Answers
The more energy that particles have, the more they move.
At a certain temperature the rate of this reaction is first order in HI with a rate constant of 0.0632 s
2HI g = H2 g + I2 g
Suppose a vessel contains HI at a concentration of 1.28M. Calculate how long it takes for the concentration of HI to decrease to 17.0% of its initial value.
Answers
Answer:
[tex]28.037\ \text{s}[/tex]
Explanation:
[tex][A]_0[/tex] = Initial concentration = 1.28 M
[tex][A][/tex] = Final concentration = [tex]0.17[A]_0[/tex]
k = Rate constant = 0.0632 s
t = Time taken
For first order reaction we have the relation
[tex]kt=\ln\dfrac{[A]_0}{[A]}\\\Rightarrow t=\dfrac{\ln\dfrac{[A]_0}{[A]}}{k}\\\Rightarrow t=\dfrac{\ln\dfrac{[A]_0}{0.17[A]_0}}{0.0632}\\\Rightarrow t=28.037\ \text{s}[/tex]
Time taken to reach the required concentration would be [tex]28.037\ \text{s}[/tex].
But Are Punnett square percentages always correct?
Answers
Answer:
yes
Explanation:
cuz is a square and if all angles are equal of a square then it is correct
What is the total number of Joules lost when 10. grams of water at 80.°C is cooled to 60.°C?
Answers
Answer:
[tex]\boxed {\boxed {\sf 836.8 \ Joules \ lost}}[/tex]
Explanation:
Since we are given the mass and change in temperature, we should use the following formula for heat.
[tex]q= mc \Delta T[/tex]
In this formula, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature.
We know the mass of the water is 10 grams. We will have to look up water's specific heat, because it is not given. It is 4.184 J/g °C.
Let's find the change in temperature. This is the difference of the final and initial temperature. The water started at 80 °C and cooled to 60°C.
ΔT= final temperature - initial temperature ΔT= 60° C - 80°C ΔT= -20 °CNow we have values for each variable.
m= 10 gc= 4.184 J/g°C ΔT= -20°CSubstitute the values into the formula.
[tex]q= 10 \ g * 4.184 \ J/g \textdegree C * -20 \textdegree C[/tex]
Multiply the first 2 numbers. The units of grams will cancel each other out.
[tex]q= 41.84 \ J/ \textdegree C * -20 \textdegree C[/tex]
Multiply again. This time, the degrees Celsius cancel.
[tex]q= -836.8 \ J[/tex]
A total of 836.8 Joules are lost.
What is the most likely meaning of concentration in paragraph 7?thinking thinking about about one one thing thing in in a a focused focused waywayamount amount of of a a substance substance found found in in waterwaterarea area where where something something comes comes fromfromchance chance to to be be foundfound
Answers
Answer:
amount of a substance found in water.
Answer:
amount of a substance found in water.
Explanation:
PLEASE HELP ME classify this reaction:
your options are
1. synthesis
2. decomposition
3. combustion
4. single replacement
5. double replacement
explain your answer for brainliest
