Pls help it’s really late <3

Answer:

nice calculations!

Explanation:

Answer:

Since it us the resistance that causes the power output, it might be intuitive to think that more resistance produces more power but as P=I^2 * R one actually needs high current and low resistqnce. That means 75 W has lower resistance and higher current.

Now you may think that making the resistance very low, one gets the most power. Not so, as the circuit has wires, power source etc. All the have their resistance. In theory one gets the maximum power over a resistor when the resistor is half of the total resistance of the circuit. This in practice would be inefficient as one would lose half of the total power elsewhere. In practice circuits have fuses that limit the current and one gets the maximum power at the current the fuse is rated to. So if there is 20 A fuse, the maximum power is 2400 W and the corresponding resistance 6 ohm.

Answer:

Size of an object, and the distance between the objects.

When the mass of an object increases the force of gravity increases as well.

Explanation:

The magnitude of this force depends upon the mass of each object and the distance between the centers of the two objects. Mathematically, we say the force of gravity depends directly upon the masses of the objects and inversely upon the distance between the objects squared.

Answer:

V = 5 m³

Explanation:

The density of air, d = 1.2 kg/m³

Mass of the dry air, m = 6 kg

We need to find the volume o the gas. We know that, the density of an object is given by mass divided by its volume. So,

[tex]d=\dfrac{m}{V}\\\\V=\dfrac{m}{d}\\\\V=\dfrac{6}{1.2}\\\\V=5\ m^3[/tex]

So, the volume of the dry air is 5 m³.

Answer: hello your question lacks some data attached below is the missing data

answer : T - mg = ma[tex]_{c}[/tex]

Explanation:

Given that the vine has a fixed end and Tarzan's path is circular

At Tarzans lowest point the point can be expressed as shown below.

It can be expressed as : T - mg = ma[tex]_{c}[/tex]

Answer:

Explanation:

PE = mgh where m is the mass in kg, g is the pull of gravity which is 9.8, and h is the height of the object above the point to which it could possibly fall, measured in meters. Plugging in:

PE = 10(9.8)(20) so

PE = 1960 J

This should be rounded to 1 sig fig according to the rules of sig fig and your numbers here, but I imagine you're not following them all that much. It should be 2000 J

Answer:

The motorcycle daredevil does not sail across the 10-m wide pool filled with hungry crocodiles

Explanation:

The given parameters are;

The height of the ramp = 2.0 m-high

The angle of elevation of the ramp, θ = 20°

The width of the pool = 10 m

The speed with which he is going when the engine fails = 10.4 m/s

The rolling friction between the rubber tires, μ = 0.02

μ·g·cos(θ) = (1/2)·(a)

a = (μ·g·cos(θ))/(1/2)

Where;

a = The acceleration down the plane

∴ a = 0.02 × 9.81 × cos(20°)/(1/2) ≈ 0.369

The length of the ramp, l = 2.0 m/(sin(20°)) ≈ 5.8476088 m

The velocity at the end of the ramp, v² = u² - 2·a·l

∴ v² = 10.4² - 2×(0.369 + 9.81 × sin(20°))×5.8476088 ≈ 64.60446471

v ≈ √(64.60446471) ≈ 8.04

∴ The velocity at the top of the ramp, v ≈ 8.04 m/s

The time it takes the motorcycle to reach ground level from the top of the ramp, t, is given as follows;

h = h₀ + u·t + (1/2)·a·t²

h₀ = 2, u = 8.04×sin(20°), a = -9.81

When h = 0 (ground level), we have;

∴ h = 2+ 8.04×sin(20°)·t - (1/2)×9.81×t²

0 ≈ 2.75·t - 4.905·t² + 2

2.75·t - 4.905·t² + 2 = 0

By using a graphing calculator, we have, t = 0.978 or t = -0.42

At ground level, the time of flight, t ≈ 0.978 s

The horizontal distance the motorcycle travels, before landing, x = u × cos(θ) × t

∴ x = 8.04×cos(20 Degrees) × 0.978 = 7.3889

The horizontal distance the motorcycle travels, before landing, x ≈ 7.3889 m

Therefore, given that the horizontal distance the motorcycle travels in the air 7.3889 m < 10 m, therefore the motorcycle daredevil does not sail across the 10-m wide pool filled with hungry crocodiles

Answer:

6KW

Explanation:

The computation is shown below:

We know that

Work done= m ×g× h

Here

W= 300×10×10

= 30000 J

= 30 KJ

And

Power= Work done ÷time taken

 P = 30000 ÷ 5

= 6000W

= 6KW

The above represent the answer

The magnitude of the frictional force working on the box is 14 N.

According to Newtons's first law, an object will continue in its state of rest or state of uniform motion unless it is acted upon by an unbalanced force. This means that motion or acceleration is caused by an unbalanced force.

Since the box is moving at constant velocity, the frictional force on the box and the force that moves the box forward are exactly equal in magnitude but opposite in direction.

Learn more: https://brainly.com/question/9352088?

Answer:

They are temperature, atmospheric pressure, wind, humidity, precipitation, and cloudiness. Together, these components describe the weather at any given time.

Answer:

12.0 Volt

Explanation:

Step 1: Given data

Resistance of the ohmic dipole (R): 100 Ohm

Intensity of current (I): 120 mA (0.120 A)

Step 2: Calculate the voltage (V) across this chemical dipole

To calculate the voltage across the ohmic dipole, we will use Ohm's law.

I = V/R

V = I × R

V = 0.120 A × 100 Ohm = 12.0 V

Answer:

See the answer below

Explanation:

Acceleration due to gravity (g) is the accelerational force experienced by a body as a result of the influence of the earth's gravitational force. It is a vector quantity, that is, it has both magnitude and direction.

The acceleration due to gravity is inversely proportional to the square of the radius of the earth. Hence, g at the equatorial region is slightly lesser (9.780 m/s2) than that of the polar regions (9.832 m/s2) of the earth because the earth bulges at the equator leading to a higher radius than at the poles.  

Answer: D

Explanation:

An elastic collision is a collision in which there is no net loss in kinetic energy in the system as a result of the collision. Both momentum and kinetic energy are conserved quantities in elastic collisions. Suppose two similar trolleys are traveling toward each other with equal speed.

Answer:

F = 124 N

Explanation:

Given that,

The mass of bicycle and the rider, m = 12 kg + 50 kg = 62 kg

Acceleration of system, a = 2 m/s²

We need to find the force required to accelerate the system. We know that,

Net force, F = ma

Put all the values,

F = 62 kg × 2 m/s²

F = 124 N

So, the required force is equal to 124 N.

Answer:

The eddy currents will be very small.

Explanation:

An object made of several thin conducting layers separated by insulation may not be affected by magnetic damping because the eddy current produced in each layer due to induction will be very small and the opposing magnetic flux produced by the eddy currents will be very small.

Answer:

flowers

Explanation:

i'm really not sure but i have this gut feeling its flowers

Answer:

Thermal physics

Explanation:

Because it uses temperature

Answer:

In my opinion both are easier if you'll work hard on it...

Answer:

Protista

Explanation:

Taxonomy can be defined as the process of naming, classification and description of living organisms such as plants and animals. Thus, the biological classification of living organisms based on similarities or characteristics such as eyes, number of legs, etc., is generally referred to as taxonomy.

Basically, taxonomy helps scientist to have a good understanding and knowledge when studying various organisms.

Furthermore, the eight (8) biological classification (taxonomy) used for grouping and organizing organisms are; kingdom, domain, phylum, family, order, class, species and genus.

An organism that has only one cell, big and has a nucleus is most likely a member of Protista. Thus, a Protista such as euglena, paramecium, amoeba, etc., have a nucleus and are unicellular.

A unicellular organism refers to a living organism that possess a single-cell while a multicellular organism has many (multiple) cells.

The magnitude of your displacement can be equal to the distance you covered, or it can be less than the distance you covered.  But it can never be greater than the distance you covered.

This is because displacement is a straight line, whereas distance can be a straight line, a squiggly line, a zig-zag line, a line with loops in it, a line with a bunch of back-and-forths in it, or any other kind of line.

The straight line is always the shortest path between two points.

If i understand your question clearly, The best choice in most scenarios is  copper.

Why?

Its due to copper's high conductive properties, its abundance, its low price compared to its fellow metal conductors, its ductile property, thermal resistance and immunity to oxidation ( rusting ).

Though Silver surpasses copper in conductivity, copper is shown to be more notable than its fellow conductors.

Answer:

5

Explanation:

The light intensity may be defined as the strength of the light or the magnitude of its brightness that a source of light can produce.

The light threshold is the minimum intensity of the light that our eye can detect and the ability to adapt to darkness.

In the context, Daniel wishes to find if can notice the difference in the intensity of the light when he add 5 candles to the set of 50 candles.

He noticed that when he added 5 candles, he could notice the difference in the intensity and when he added less than 5 candles to the set of 50 candles he could not detect.

Thus, the difference threshold for Daniel to detect the change in the intensity of the light is 5 candles.

Answer:

The ratio of the amplitudes of siren to dishwasher is 10.

Explanation:

loudness of dishwasher = 40 dB

loudness of siren = 60 dB

let the intensity of dishwasher is I an the intensity of siren is I'.

Use the formula of intensity and decibels.

[tex]dB = 10 log\frac{I}{I_o}\\\\40=10 log\frac{I}{I_o}\\\\4 = log\frac{I}{I_o}\\\\I = 10000 I_o[/tex]

And

[tex]60=10 log\frac{I'}{I_o}\\\\60 = log\frac{I'}{I_o}\\\\I' = 1000000 I_o[/tex]

The intensity if proportional to the amplitude.

[tex]\frac{A'}{A}=\sqrt\frac{1000000}{10000}\\\\\frac{A'}{A}= 10[/tex]

The answer is B. Mono and polyunsaturated fats because the other two are really harmful and they are not healthy whatsoever.

Answer:

A. Endothermic reaction.

B. +150KJ.

C. 250KJ.

Explanation:

A. The graph represents endothermic reaction because the heat of the product is higher than the heat of the reactant.

B. Determination of the enthalpy change, ΔH for the reaction. This can be obtained as follow:

Heat of reactant (Hr) = 50KJ

Heat of product (Hp) = 200KJ

Enthalphy change (ΔH) =..?

Enthalphy change = Heat of product – Heat of reactant.

ΔH = Hp – Hr

ΔH = 200 – 50

ΔH = +150KJ

Therefore, the enthalphy change for the reaction is +150KJ

C. The activation energy for the reaction is the energy at the peak of the diagram.

From the diagram, the activation energy is 250KJ.

Answer:

It spreads diseases.

Explanation:

But when cooked food is kept on the place where uncooked meat or food was kept the germs spread to the cooked food also and as the cooked food cannot be washed it harms us as we directly consume it.

Answer:

The amount of heat energy received at any location on the globe is a direct effect of Sun angle on climate, as the angle at which sunlight strikes Earth varies by location, time of day, and season due to Earth's orbit around the Sun and Earth's rotation around its tilted axis.

Answer:

The earth's climate system depends entirely on the sun for its energy. Solar radiation warms the atmosphere and is fundamental to atmospheric composition.

Explanation:

hope this helps :)

Answer:

Increase in frequency constantly

Explanation:

This concept can be explained by Doppler shift as per which any form of disturbance spreads out spherically from its point of origin. If the source of sound wave is stationary and the receiver is also stationary, then the frequency remains the same but if the source is moving, then the disturbance caused is closer on one side and distant on the other side thereby producing shorter wavelength in direction the source is moving and longer wavelength in the opposite direction.

Answer:

The ball and the wall experience the same force.

Explanation:

According to the third law of Newton, which states that "for every action, there is an equal and opposite reaction", this means that when an object 1 acts on object 2 with a certain force, object 2 also acts on object 1 with the same magnitude of force but in an opposite direction.

According to this question, a ball hits a wall with a certain force. This means that the wall will react on the ball with the same force magnitude, but in an opposite manner. Hence, the ball and the wall experience the same force.

answer:

Explanation:

the impulse-momentum theorem states that the change in momentum of an object equals the impulse applied to it. The impulse-momentum theorem is logically equivalent to Newton's second law of motion (the force law).

According to the impulse-momentum theorem, the amount of change in an object's momentum equal to the amount of force applied to the object over a certain amount of time. So, option B.

According to the impulse-momentum theorem, the impulse that is applied to an item is equal to the change in momentum.

It shows how an object's change in momentum depends on both the strength and duration of the applied forces.

Impulse is defined as the force acting for a short interval of time.

Impulse = F x t

The momentum of the object,

P = mv

So, the rate of change of momentum,

dP/dt = d(mv)/dt

dP/dt = mdv/t

dP/dt = ma = Force

To learn more about impulse-momentum theorem, click:

https://brainly.com/question/14121529

#SPJ6

Answer:

A. [tex]1.88\times 10^{-11}\,F[/tex].

Explanation:

By definition of Electric Capacitance, the capacitance of the system ([tex]C[/tex]), in farads, is described by the following formula:

[tex]C = \frac{q}{V}[/tex] (1)

Where:

[tex]q[/tex] - Electric charge, in coulombs.

[tex]V[/tex] - Voltage, in volts.

If we know that [tex]q = 9.4\times 10^{-10}\,C[/tex] and [tex]V = 50\,V[/tex], then the capacitance of the system is:

[tex]C = \frac{9.4\times 10^{-10}\,C}{50\,V}[/tex]

[tex]C = 1.88\times 10^{-11}\,F[/tex]

The correct answer is A.