Which type of balance is key to sitting?
dynamic
static
bosu
level
Explanation:
bosu
here is your answer
Một ô tô khối lượng một tấn chuyển động trên một đường nằm ngang. Hệ số ma sát giữa bánh ô tô và mặt đường là 0,07. Gia tốc trọng trường g=9,8m/s2
a) vẽ và xác định tên các lực tác động lên vật. Viết phương trình chuyển động của vật.
b) nếu ô tô chuyển động đều, xuống dốc có độ dốc 5%. Tính lực kéo của ô tô.
c) nếu ô tô chuyển động đều. Lên dốc có độ dốc 5%. Tính lực kéo của động cơ ô tô
A woman stands on a bathroom scale in a motionless elevator. When the elevator begins to move, the scale briefly reads only 0.64 of her regular weight. Calculate the magnitude of the acceleration of the elevator.
Answer:
The downwards acceleration is 3.53 m/s2.
Explanation:
Let the true weight is m g.
The reading of the balance, R = 0.64 mg
Let the acceleration is a.
As the apparent weight is less than the true weight so the elevator goes down wards with some acceleration.
Use Newton's second law
m g - R = m a
m g - 0.64 m g = m a
0.36 g = a
a = 3.53 m/s2
A particle moves along a straight line with equation of motion s = f(t), where s is measured in meters and t in seconds. Find the velocity and speed (in m/s) when t = 5. f(t) = 18 + 48/t + 1
Answer:
The velocity of the particle = -1.92 m/s
The speed of the particle = 5.72 m/s
Explanation:
Given equation of motion;
[tex]f(t) = 18 \ + \ \frac{48}{t} \ + \ 1[/tex]
Velocity is defined as the change in displacement with time.
[tex]V = \frac{df(t)}{dt} = -\frac{48}{t^2} \\\\at \ t = 5 \ s\\\\V = -\frac{48}{5^2} = \frac{-48}{25} = - 1.92 \ m/s[/tex]
The distance traveled by the particle in 5 s:
[tex]s = f(5) = 18 + \frac{48}{5} + 1\\\\s= 28.6 \ m[/tex]
The speed of the particle when t = 5s
[tex]Speed = \frac{28.6}{5} = 5.72 \ m/s[/tex]
You use a force sensor to measure the weight of an object 10 times, and get the following values: 2.8, 2.6, 2.9, 3.1, 2.4, 2.9, 3.2, 2.5, 2.7, 3.0, where all ten values are in units of N. What is the mean weight of the object, as well as the measurement uncertainty of the weight?
Answer: Mean weight = 2.81 N and Measurement of uncertainty = 0.82 N
Explanation:
Mean = [tex]\dfrac{\text{Sum of observations}}{\text{number of observations}}[/tex]
Mean weight is [tex]($\mu)=\frac{2.8+2.6+2.9+3.1+2.4+2.9+3.2+2.5+2.7+3.0}{10}[/tex]
[tex]=2.81$[/tex]
[tex]$\sum_{i=1}^{10}\left(x_{i}-\mu\right)^{2}=0.61[/tex]
[tex]$\sigma=\sqrt{\frac{1}{N-1} \sum_{i=1}^{10}\left(x_{i}-\mu\right)^{2}}[/tex]
[tex]=\sqrt{\frac{1}{10-1} 0.61}=0.082$[/tex]
Measurement of uncertainty will be [tex]$\sigma=0.082$[/tex]
hence, Weight [tex]$W=2.81 \pm 0.082 N$[/tex]
what is the resistance of a bulb of 40w connected in a line of 70v
Answer:
122.5 ohm
Explanation:
Given :
P=40 w
V= 70 V
R=?
Resistance can be calculated as :
[tex]P=\frac{V^{2} }{R} \\40=\frac{(70)^{2} }{R}\\40=\frac{4900}{R} \\R=\frac{4900}{40} \\R=122.5 ohm[/tex]
Therefore, resistance of the bulb will be 122.5 ohm
What does a model of a light wave tell us about
brightness and color?
Answer:
A wave model of light is useful for explaining brightness,color, and the frequency-dependent bending of light at a surface between media. However, because light can travel through space, it cannot be a matter wave, like sound or water waves.
A conductor is placed in an external electrostatic field. The external field is uniform before the conductor is placed within it. The conductor is completely isolated from any source of current or charge.
1. Which of the following describes the electricfield inside this conductor?
a. It is in thesame direction as the original external field.
b. It is in theopposite direction from that of the original externalfield.
c. It has adirection determined entirely by the charge on itssurface.
d. It is alwayszero.
2. The charge density inside theconductor is:
a. 0
b. non-zero;but uniform
c. non-zero;non-uniform
d. infinite
Answer:pp
Explanation:
ii
A 2.7 kg mass is connected to a spring (k=159 N/m) and is sliding on a horizontal frictionless surface. The mass is given an initial displacement of +19 cm and released with an initial velocity of -13 cm/s. Determine the acceleration of the spring at t=3.4 seconds.
Answer:
The acceleration of the spring at [tex]t = 3.4\,s[/tex] is -29339.947 centimeters per square second.
Explanation:
The mass-spring system experiments a Simple Harmonic Motion, whose kinematic expression is the following:
[tex]x(t) = A\cdot \cos \left(\sqrt{\frac{k}{m} }\cdot t + \phi\right)[/tex] (1)
Where:
[tex]x(t)[/tex] - Position, in centimeters.
[tex]A[/tex] - Amplitude, in centimeters.
[tex]k[/tex] - Spring constant, in newtons per meter.
[tex]m[/tex] - Mass, in kilograms.
[tex]\phi[/tex] - Phase, in radians.
By Differential Calculus, we derive expression for the velocity and acceleration of the mass-spring system:
[tex]v(t) = -\sqrt{\frac{k}{m} }\cdot A\cdot \sin \left(\sqrt{\frac{k}{m} }\cdot t +\phi\right)[/tex] (2)
[tex]a(t) = -\frac{k\cdot A}{m}\cdot \cos \left(\sqrt{\frac{k}{m} }\cdot t +\phi\right)[/tex] (3)
Where [tex]v(t)[/tex] and [tex]a(t)[/tex] are the velocity and acceleration of the system, in centimeters per second and centimeters per square second, respectively.
If we know [tex]m = 2.7\,kg[/tex], [tex]k = 159\,\frac{N}{m}[/tex], [tex]t = 0\,s[/tex], [tex]x(t) = 19\,cm[/tex] and [tex]v(t) = -13\,\frac{cm}{s}[/tex], then we have the following system of nonlinear equations:
[tex]A \cdot \cos \phi = 19[/tex] (1)
[tex]-7.674\cdot A \cdot \sin \phi = - 13[/tex] (2)
If we divide (2) by (1):
[tex]-7.674\cdot \tan \phi = -0.684[/tex]
[tex]\tan \phi = 0.089[/tex]
[tex]\phi = \tan^{-1} 0.089[/tex]
[tex]\phi \approx 0.028\,rad[/tex]
By (1), we get the value of the amplitude:
[tex]A = \frac{19}{\cos \phi}[/tex]
[tex]A = 19.075\,cm[/tex]
If we know that [tex]A = 19.075\,cm[/tex], [tex]k = 159\,\frac{N}{m}[/tex], [tex]m = 2.7\,kg[/tex], [tex]t = 3.4\,s[/tex] and [tex]\phi \approx 0.028\,rad[/tex], then the acceleration of the spring is:
[tex]a(t) = -29339.947\,\frac{cm}{s^{2}}[/tex]
The acceleration of the spring at [tex]t = 3.4\,s[/tex] is -29339.947 centimeters per square second.
What is the answer can you explain it to me
Answer:
C) 300 Ohm.
Explanation:
In a series circuit, total resistance is just adding all the resistance together. So R (total) = 75 +75 +75+ 75 = 300 ohms
Parallel circuit are different because you add the inverses of resistance and you flip the final answer.
You can confirm your answers using the tools below:
https://www.omnicalculator.com/physics/series-resistor
https://www.omnicalculator.com/physics/parallel-resistor
show your full steps
Answer:
x = 13552.6 m
Explanation:
This is a projectile throwing exercise
Let's start by looking for the time it takes for the pump to reach the ground y = 0
y = y₀ + v_{oy} t - ½ g t²
as the plane flies horizontally the vertical speed is zero
0 = y₀ + 0 - ½ g t²
t = [tex]\sqrt{2y_o/g}[/tex]
t = [tex]\sqrt{2 \ 10000/9.8}[/tex]
t = 45.175 s
with this time we can find the distance it travels horizontally
x = v₀ₓ t
x = 300 45,175
x = 13552.6 m
the bomb must be dropped at this distance before hitting the target
The more bonds an atom can make, the more likely it is to combine with other aton
Which element is most likely able to make the greatest variety of bonds?
nitrogen
hydrogen
oxygen
carbon
Answer:
carbon has tetra valency while oxygen can make 2 bonds while nitrogen can make 3 bonds and hydrogen can make 1 bond so i think answer is definatly carbon
Explanation:
Answer the following questions
1. Heat in liquid travels from
a) bottom to top
b) top to bottom
c) left to right
d) right to left
2. The direction of flow of heat is
a) always from a cooler body to a hotter body
b) always from a hotter body to cooler body
c) always from a body at a lower temperature to a body at a higher temperature
d) all the above
3. A cold steel spoon is dipped in a cup of hot milk. The steel spoon transfer the heat to its other end by the process of
a) convection
b) conduction
c) radiation
d) none of the above
help plzzzzzzzzzzzz ?
Explanation:
1. First, let's find the total resistance of the circuit. We begin by combining [tex]R_{4}[/tex], [tex]R_{5}[/tex] and [tex]R_{6}[/tex]:
[tex]R_{456}=R_{4} + \dfrac{R_{5}R_{6}}{R_{5} + R_{6}}[/tex]
[tex]= 6\:Ω + \dfrac{(3\:Ω)(5\:Ω)}{3\:Ω+5\:Ω} = 7.9\:Ω[/tex]
Now time to combine [tex]R_{2}[/tex] and [tex]R_{3}[/tex] and they are connected in series so
[tex]R_{23} =R_{2} + R_{3} = 17\:Ω[/tex]
Note that [tex]R_{23}[/tex] and [tex]R_{456}[/tex] are connected in parallel so
[tex]R_{23456} = \dfrac{R_{23}R_{456}}{R_{23}+R_{456}}=5.4\:Ω[/tex]
Finally, [tex]R_{23456}[/tex] is connected in series with [tex]R_{1}[/tex] so the total resistance [tex]R_{T}[/tex] is
[tex]R_{T} = R_{1} + R_{23456} = 10\:Ω + 5.4\:Ω = 15.4\:Ω[/tex]
2. The total current in the circuit is
[tex]I_{T} = \dfrac{V}{R_{T}} = \dfrac{20\:V}{15.4\:Ω} = 1.3\:A[/tex]
3. The voltage drop across [tex]R_{1},\:V_{1}[/tex] is
[tex]V_{1} = I_{T}R_{1} = (1.3\:A)(10\:Ω) = 13\:V[/tex]
4. We can see that [tex]I_{T} = I_{1} + I_{2}[/tex]. To solve for [tex]I_{1}[/tex], we need [tex]V_{23}[/tex], which is just [tex]V_{T} - V_{1} = 20\:V - 13\:V = 7\:V[/tex] , which gives us
[tex]I_{1} = \dfrac{V_{23}}{R_{23}} = \dfrac{7\:V}{17\:Ω} = 0.4\:A[/tex]
5. From #2 & #4, [tex]I_{2} = 1.3\:A - 0.4\:A = 0.9\:A[/tex] and we also know that the voltage drop across [tex]R_{456}[/tex] is 7 V, the same as that of [tex]R_{23}[/tex]. The voltage drop across [tex]R_{4}[/tex] is
[tex]V_{4} = I_{2}R_{4} =(0.9\:A)(6\:Ω) = 5.4\:V[/tex]
This means that the voltage drop across [tex]R_{6}[/tex] is 7 V - 5.4 V = 1.6 V. Knowing this, the current through [tex]R_{6}[/tex] is
[tex]I_{6} = \dfrac{1.6\:V}{5\:Ω} = 0.3\:A[/tex]
You are helping to design a new electron microscope to investigate the structure of the HIV virus. A new device to position the electron beam consists of a charged circle of conductor. This circle is divided into two half circles separated by a thin insulator so that half of the circle can be charged positively and the other half can be charged negatively. The electron beam will go through the center of the circle. To complete the design your job is to calculate the electric field in the center of the circle as a function of the amount of positive charge on the half circle, the amount of negative charge on the other half circle, and the radius of the circle.
Answer:
The electric field in the center is [tex]\frac{2k}{\pi R^{2}}\left ( Q_{2}-Q_{1 } \right )[/tex].
Explanation:
An empty parallel plate capacitor is connected between the terminals of a 8.85-V battery and charges up. The capacitor is then disconnected from the battery, and the spacing between the capacitor plates is doubled. As a result of this change, what is the new voltage between the plates of the capacitor
Answer:
The new voltage is 17.7 V.
Explanation:
Voltage, V = 8.85 V
The spacing is doubled.
When it is disconnected, the charge remains same,
q = C V ..... (1)
where, C is the capacitance, V is the voltage.
The capacitance is inversely proportional to the distance between the two plates.
So, when the spacing is doubled, the capacitance is halved.
Let the new voltage is V'.
C V = C' V'
C x 8.85 = C/2 x V'
V' = 17.7 V
what is effort arm
don't say the answer of gogle
Answer:
effort arm mean the use of any work by using your hand force motion or by hand power
When you release some of the paint from a spray paint can and the can remains at the same temperature, which gas law does this represent?
Answer:
Boyle's law.
Explanation:
Robert Boyle was an Irish chemist and is famously referred to as the first modern chemist. He was born on the 25th of January, 1627 in Lismore, Ireland and died on the 31st, December 1691, London, United Kingdom.
Boyles states that when the temperature of an ideal gas is kept constant, the pressure of the gas is inversely proportional to the volume occupied by the gas.
Mathematically, Boyles law is given by;
[tex] PV = K[/tex]
[tex] P_{1}V_{1} = P_{2}V_{2} [/tex]
Where;
P1 is the original pressure.
P2 is the final pressure.
V1 is the original volume.
V2 is the final volume.
Hence, when you release some of the paint from a spray paint can by applying an amount of pressure and the can remains at the same temperature, the gas law which this represent is Boyle's law.
what do you understand by Force,acceleration and mass??
Answer:
Force is a push or pull that an object can exert on other objects. Acceleration is the rate of change of an object's speed and Mass is the amount of matter in an object and is expressed in kilograms.Explanation:
It is summarized by the equation: Force (N) = mass (kg) × acceleration (m/s2).A computer monitor uses 200 W of power. How much energy does it use in
10 seconds?
Answer: see below explanation, should be straight forward from there? ;)
Explanation: 1 watt = 1 joule per second
Watt is a measure of energy over time
So 10 seconds... u got this :)
calculate the work function that requires a 455 nm photon to eject an electron of a value 0.73 eV
Answer:
W = 2 eV
Explanation:
Given that,
The wavelength of a photon = 455 nm
The kinetic energy of a photon, K = 0.73 eV
We need to find the work function of the electron. It can be solved using Einstein's equation such that,
[tex]W=E-K[/tex]
E is the energy of the photon
So,
[tex]W=\dfrac{hc}{\lambda}-K\\\\W=\dfrac{6.63\times 10^{-34}\times 3\times 10^8}{455\times 10^{-9}\times 1.6\times 10^{-19}}-0.73\\\\W= 2.73\ eV-0.73\ eV\\\\W=2\ eV[/tex]
So, the work function of the metal is 2 eV.
Which of the following is a good example of a contact force?
ОА.
Earth revolving around the Sun
OB.
a bridge suspended by cables
OC.
a ball falling downward a few seconds after being thrown upward
OD. electrically charged hairs on your head repelling each other and standing up
Answer:
A bridge suspended by cables
Explanation:
Both objects represent a contact force (in this case, normal force) acting on each other. The force occurs since both objects are in direct physical contact.
Which characteristics describe a point charge
Answer:
Explanation:
It takes up no space and acts uniformly on its surroundings.
Given a point charge, or a particle of infinitesimal size, that contains a certain charge, electric field lines emanate from equally in all radial directions. If the point charge is positive, field lines point away from it; if the charge is negative, field lines point toward it.
A swift blow with the hand can break a pine board. As the hand hits the board, the kinetic energy of the hand is transformed into elastic potential energy of the bending board; if the board bends far enough, it breaks. Applying a force to the center of a particular pine board deflects the center of the board by a distance that increases in proportion to the force. Ultimately the board breaks at an applied force of 870 N and a deflection of 1.4 cm.
a. To break the board with a blow from the hand, how fast must the hand be moving? Use 0.50 kg for the mass of the hand.
b. If the hand is moving this fast and comes to rest in a distance of 1.2 cm, what is the average force on the hand?
Answer:
A. The hand must move with a velocity of 6.98 m/s to break the board.
B. Average force on the hand = 1025 N
Explanation:
A.To determine the speed the hand must move with to break the board, the force workdone in breaking the board is found first.
Workdone = force × distance
Minimum force required = 870 N;
Distance moved by board/Deflection in order to break = 1.4 cm = 0.014 M
Workd done = 870 N × 0.014 m = 12.18 Nm or 12.18 J
This work done = Kinetic energy of the hand
Kinetic energy = mv²/2 ; where m is mass and v is velocity
Mass of hand = 0.50 Kg, velocity = ?, K.E. = 12.18 J
v² = 2 KE/m
v = √2KE/m
v = √(2 × 12.18/0.50)
v = 6.98 m/s
Therefore, the hand must move with a velocity of 6.98 m/s to break the board.
B. Average force on the hand
This can be determined using the equation of motion, v² = u² + 2as to find acceleration, since force = mass × acceleration
From the equation of motion, a = v² - u²/2s
At rest, v = 0, u = 6.98, s = 1.2 cm = 0.012 m
a = 0² - 6.98²/ 2 × 0.012
a = -2030 m/s²
Force = 2030 m/s² × 0. 50 kg = 1015 N
Therefore, Average force on the hand = 1025 N
hoW DO YOU SPELL THIS?
Answer:
Spell what?
Can u please mention that too?
Answer:
what
Explanation: how do you spell what please include this in your next post
You sit on ice and shove a heavy box with your feet with a given force. What will you and the box share? *
A) Same acceleration
B) equal and opposite acceleration
C) the equal and opposite force
D) same force
explain please
Answer:
the correct answer is C
Explanation:
In this exercise we will analyze the situation.
When the person is on the ice, the friction coefficient is very small, if the box is in a place where there is no ice, the coefficient is different, so the friction force on each body is different.
Therefore the acceleration that each body acquires is different.
If we apply the conservation of momentum, each body moves in the opposite direction, but with different speeds.
If we use Newton's third law, the force applied to each body has the same magnitude and opposite direction, which is why the force is of the action and reaction type
Consequently the correct answer is C
Alice's friends Bob and Charlie are having a race to a distant star 10 light years away. Alice is the race official who stays on Earth, and her friend Darien is stationed on the star where the race ends. Bob is in a rocket that can travel at 0.7c; whereas Charlie's rocket can reach a speed of 0.866c. Bob and Charlie start at the same time. Draw space- diagrams from each perspective.
Required:
Estimate how long it takes Bob and Charlie to finish the race from each perspective.
Solution :
The distance between the starting point and the end point, [tex]L_0[/tex] = 10 light years
But due to the relativistic motion of Bob and Charlie, the distance will be reduced following the Lorentz contraction. The contracted length will be different since they are moving with different speeds.
For Bob,
Speed of Bob's rocket with respect to Alice, [tex]L_b = 0.7 \ c[/tex]
So the distance appeared to Bob due to the length contraction,
[tex]$L_b=L_0\sqrt{1-\frac{V_b^2}{c^2}$[/tex]
[tex]$L_b=10\times \sqrt{1-0.49} \ Ly$[/tex]
[tex]$=7.1 \ Ly$[/tex]
Therefore, the time required to finish the race by Bob is
[tex]$t_b = \frac{L_b}{V_b}$[/tex]
[tex]$=\frac{7.1 \ c}{0.7 \ c}$[/tex]
= 10.143 year
For Charlie,
Speed of Charlie's rocket with respect to Alice, [tex]L_c = 0.866 \ c[/tex]
So the distance appeared to Charlie due to the length contraction,
[tex]$L_b=L_0\sqrt{1-\frac{V_c^2}{c^2}$[/tex]
[tex]$L_b=10\times \sqrt{1-0.75} \ Ly$[/tex]
[tex]$=5 \ Ly$[/tex]
The time required to finish the race by Charlie is
[tex]$t_b = \frac{L_c}{V_c}$[/tex]
[tex]$=\frac{5 \ c}{0.866 \ c}$[/tex]
= 5.77 year
Fiber optic (FO) cables are based upon the concept of total internal reflection (TIR), which is achieved when the FO core and cladding have the same refractive indices.
a. True
b. False
Answer:
False
Explanation:
Though fiber active cable is based on the concept of internal reflection but it is achieved by refractive index which transmit data through fast traveling pulses of light. It has a layer of glass and insulating casing called “cladding,”and this is is wrapped around the central fiber thereby causing light to continuously bounce back from the walls of the Cable.
who won the battle of Buxar
Answer:
British East India Company
The battle was fought at Buxar, a "small fortified town" within the territory of Bihar, located on the banks of the Ganga river about 130 kilometres (81 mi) west of Patna; it was a decisive victory for the British East India Company.
When you are standing without moving, you exert a force on the ground. Why doesn't Earth slowly start accelerating downwards?
Explanation:
You would think it should. But remember the Force is also determined by mass. The mass of the earth markes our mass like the smallest part of a mosquito leg. The earth will go on it its merry way without cosidering us at all.
