Answers
Answer:
D
Explanation:
A synthesis reaction is a reaction in which two or more reactants combine to form a given product.
If we look closely at option D, you will notice that sulphur and oxygen combined together to form sulphur dioxide. That is a typical example of chemical synthesis.
Hence;
S + O2 ----->SO2 is a synthesis reaction.
Related Questions
Cual es la longitud de onda de un foton emitido durante la transicion desde el stado n=5 al estado n=3 en atomo Hidrogeno? Dar como respuesta de la longitud de onda en nm (nanometros)
Answers
Answer:
1302 nm
Explanation:
Del formulario de Rydberg para longitud de onda
1 / λ = R (1 / nf ^ 2 - 1 / ni ^ 2)
1 / λ = 1.097 × 10 ^ 7 (1/3 ^ 2 - 1/5 ^ 2)
1 / λ = 1.097 × 10 ^ 7 (0.11 - 0.04)
1 / λ = 1.097 × 10 ^ 7 (0.07)
= 1,302 × 10 ^ -6 m
o 1302 nm
Element 'X' forms a chloride with the formula XCl2, which is a solid with high melting point. X would most likely be in the same group of the periodic table as:
I) Si
2) Al
3) Mg
4) Na
pls pls answer fast
Answers
Answer:
Mg
Explanation:
Mg forms 2+ ions and mgcl2 has a melting point over 700°C I believe.
If a quantity of this substance existed as a solid at a pressure of 0.75 atm and a temperature of 50°C, what phase
change(s) would occur if the temperature increased to 500°C?
a. Freezing and deposition
b. Melting and freezing
c. Condensation and sublimation
d. Melting and vaporization
Answers
PLZ HELL ME WITH MY WORK
Answers
Answer:
Ba
Explanation:
chemical formula of magnesium nitrate
Answers
Hello.
Magnesium nitrate is a chemical compound with the formula Mg (NO₃) ₂. Magnesium nitrate is an inorganic salt very soluble in water and alcohol and has the appearance of fine white crystals.
Magnesium Nitrate is commonly used as a fertilizer due to its high nutritional value, since it provides Magnesium and Nitrogen, these are important nutrients in the growth of crops. It is a water soluble fertilizer. Contains 10.5% N - 15.6% MgO. Provides nitrogen in the form of nitrate.
Plz Help I have One more time To retake and I can't fail it..
Answers
Answer:
A
Explanation:
I think the answer would be A
1. Necesitas un "cubo concentrado" (de esos que se usan para sazonar las comidas Maggie, ricostilla) dos vasos de vidrio o plástico y agua (caliente y fría). 2.Agrega al vaso con agua fria la mitad de un cubo concentrado y déjala reposar unos minutos. Prepara el segundo vaso con agua caliente y agrégale la otra mitad del cubo. 3. Argumenta tus observaciones en relación con lo observado y con la teoria vista. ¿Como influye la temperatura en este experimento?
Answers
El cubo Maggie es un sazonador que contiene caldo de pollo y grasas, por lo que se disuelve fácilmente al entrar en contacto con el agua caliente gracias a que la temperatura que derrite las grasas y se vuelven líquidas, mientras que con el agua fría no puede disolverse así de rápido ya que las grasas siguen en estado sólido.
Jack was camping. He put a can of baked beans on his campfire, without opening the lid. The can exploded. What happened?
Answers
Answer:
Too much steam expands within the can, causing it to explode
Explanation:
Beans contain water, and when water is heated, steam is created. As the steam increases, there's less and less room for it to go. The built up pressure causes the can to explode.
plz answer (d) explain
Answers
Cu2+ is reduced to Cu.
Change in oxidation state is from +2 to 0
Por favor, necesito ayuda, es urgente!!!
Answers
Answer:
what type of language this is ??
Cuál es tejidos conforman el sistema de tejido fundamental
Answers
Explanation:
Los tejidos que conforman el tejido fundamental son los siguientes:
-Parénquima
-Colénquima
-Esclerénquima.
El tejido fundamental constituye la parte principal del cuerpo de la planta porque intervienen en funciones tan importantes para el desarrollo y sostenimiento de la planta como el proceso de la fotosíntesis, el almacenamiento de agua y de nutrientes .
Which of the following about a balanced chemical reactions is
NOT true?
O A properly written chemical equation will include the states of matter
for every substance in the reaction.
O The number of atoms of each element must be the same for both
reactants and products.
A balanced chemical equation must follow the Law of Conservation
of Matter
A balanced chemical equation must always include coefficients on
every reactant and product.
Answers
Answer:
A balanced chemical equation must always include coefficients on every reactant and product.
Explanation:
A balanced chemical equation does not need to include coefficients on every reactant and product.
For example, below is a balanced chemical equation in which the reactants and the products have no coefficients whatsoever:
NaOH(aq) + HCl (aq) -----> NaCl (s) + H2O (l)
Of course, a properly written chemical equation must include the states of matter of all the substances in the reaction and the number of atoms of each element must balance both in the reactant and product sides of the equation. Generally, a balanced chemical equation must obey the law of conservation of matter which opines that matter can neither be created nor destroyed but can only be converted from one form to another.
Hence, that a balanced chemical equation must always include coefficients on every reactant and product is not true.
if shoto todoroki has a half hot half cold quirk and he eats a ice cube does one half melt and one half freeze
Answers
Answer:
in a way yes and no
Explanation:
shoto can control the temperature of both of his quirks so one can over power the other
he can melt the ice with the fire
and freeze the fire over the ice
hope it helps
Calculate the mass percent of carbon,oxygen, nitrogen and hydrogen in acetamide, C2H5NO.
Molar Mass:
O=16, N=14,C=12, H =1.
Answers
Answer:
40.68 % C
23.73 % N
8.47% H
27.12% O
Explanation:
The mass percent of an element X in a compound is calculated as the molar mass (MM) of X multiplied by the number of atoms of X in the compound, divided into the molecular weight (MW) of the compound, as follows:
mass percent of X = (MM(X) x number of atoms of X)/MW compound x 100
Thus, we first calculate the MW of acetamide (C₂H₅NO) by using the molar mass of the chemical elements C, H, N and O:
MW(C₂H₅NO) = (12 g/mol C x 2) + (1 g/mol H x 5) + 14 g/mol N + 16 g/mol O = 59 g/mol
Now, we can calculate the mass percent of each element (C, H, N, O) in C₂H₅NO:
Mass percent of C (2 atoms of C in 1 molecule of C₂H₅NO):% mass C = (12 g/mol x 2)/(59 g/mol) x 100 = 40.68 %
Mass percent of N (1 atom of N in 1 molecule of C₂H₅NO):% mass N = (14 g/mol x 1)/(59 g/mol) x 100 = 23.73 %
Mass percent of H (5 atoms of H in 1 molecule of C₂H₅NO):
% mass H = (1 g/mol x 5)/(59 g/mol) x 100 = 8.47 %
Mass percent of O (1 atom of O in 1 molecule of C₂H₅NO):
% mass O = (16 g/mol x 1)/(59 g/mol) x 100 = 27.12 %
The sum of the mass percents has to be equal to 100%:
40.68 % C + 23.73 % N + 8.47% H + 27.12% O = 100%
what is the temperature in kelvins of 23 Celsius? hurry pls
Answers
Answer:
23°C + 273.15 = 296.15K
I HOPE ITS RIGHT IF NOT THEN SORRYHAVE A GREAT DAY :)
El tipo de enlace en los compuestos: NaF , SO2 e I2 ,son respectivamente de acuerdo a sus electronegatividades que son las siguientes: Na = 0.9 F= 4.0 S= 2.6 I =2.7 F=4.0
Answers
Respuesta:
NaF: Enlace iónico
SO₂: Enlace covalente polar
I₂: Enlace covalente apolar
Explicación:
El tipo de enlace entre 2 elementos depende de la diferencia de electronegatividad.
Si ΔEN = 0, el enlace es covalente apolar.Si 0 < ΔEN ≤ 1.7 , el enlace es covalente polar.Si ΔEN > 1.7 , el enlace es covalente iónico.NaF
ΔEN = |EN(Na)-EN(F)| = |0.9-4.0| = 3.1
El enlace es iónico.
SO₂
ΔEN = |EN(S)-EN(O)| = |2.6-3.5| = 0.9
El enlace es covalente polar.
I₂
ΔEN = |EN(I)-EN(I)| = |2.7-2.7| = 0
El enlace es covalente apolar.
what mass of aluminium is produced from 100g of aluminium oxide?
Answers
Answer:
This answer is 108g mass of aluminum is produced from 100g of aluminum oxide
Identifica las formas de energía mecánica
(cinética y potencial) que tienen lugar en diferentes puntos del movimiento en
un sistema mecánico (caída libre, montaña rusa, péndulo).
Answers
2 Tipos de Energía Mecánica
2.1 1. Energía hidráulica
2.2 2. Energía eólica
2.3 3. Energía Mareomotriz
3 Ejemplos de Energía Mecánica
3.1 1. Planta hidroeléctrica
3.2 2. Máquinas de Vapor
3.3 3. Motor de Combustión interna
3.4 4. Molinos de Viento
3.5 5. Un Juego de Billar
3.6 6. Motor eléctrico
3.7 7. Locomotora
3.8 8. Bala
3.9 9. Una pistola de Dardos
3.10 10. Pelota sobre una mesa
https://www.aura-energia.com/ejemplos-de-energia-mecanica/
In the following acid-base reaction,
Cl- is the
HCI(g) + H2O(l) →H30+(aq) + Cl(aq)
acid
base
conjugate
base
Answers
Answer:
conjugate base
Explanation:
The following equation is given in this question:
HCI(g) + H2O(l) → H30+(aq) + Cl-(aq)
In accordance to Brønsted–Lowry acid–base theory, an acid is a substance that loses an hydrogen ion (H+) or proton in an aqueous solution. This theory further indicated that the substance formed after an acid loses its hydrogen ion is called a CONJUGATE BASE.
In the above equation, HCl is the acid because it loses H+ while the substance formed after the loss of H+, which is Cl- is a conjugate base.
Which of the following are properties of metalloids?
A. Semi-conductors
B. All of these
C. React like metals sometimes
D. React like non-metals sometimes
Answers
Answer:
all of these are properties of metalloids
Answer:
The answer is B. All of these
Explanation:
Can you mark me the brainliest?
. Why a chlorine atom with an atomic number of 17 will be negatively charged when its valance shell gains an electron.
Answers
Explanation:
When chlorine bonds and becomes stable, (had a full outer electron shell), because we know that chlorine has 7 electrons in it’s outer shell, it requires 1 to gain noble gas structure. So, when if bonds with an element and then becomes stable, the gaining of an electron means it becomes a negatively charged ion. (an ion being a charged particle.)
Why boiling point is less at hilly station?
Answers
Hope it helps. Pls mark me as brainliest :D
Name the following compound NiBr2?
Answers
Answer:
the Name of NiBr2 is
Nickel(II) bromide
Synonyms: Nickel(II) bromideNickel dibromideDibromonickelNickelous bromideNickel ...
Molecular Formula: NiBr2 or Br2Ni
PubChem CID: 278492
Nồng độ mol của 200ml dung dịch Nacl chứa 0,5 mol chất tan là :
Answers
Answer:
Explanation:
2,5M
Answer:
2,5m
Explanation:
c=n:v
The concentration of hydronium ions is greater than 1 × 10–7 for acidic solutions. True False
Answers
The concentration of hydronium ions (H₃O⁺) is generally greater than 1 × 10⁻⁷ for all acidic solutions: True.
What is an acidic solution?An acidic solution can be defined as a type of aqeous solution that has a high concentration of hydrogen ions (H⁺), which is typically greater than that of pure water.
As a result of the fact that an acidic solution has a power of hydrogen ions (pH) below 7, the concentration of hydronium ions (H₃O⁺) derived from the protonation of water would be greater than 1 × 10⁻⁷ for all acidic solutions.
In conclusion, we can deduce that a property of all acidic solution is a concentration of hydronium ions (H₃O⁺) that is greater than 1 × 10⁻⁷.
Read more on acidic solution here: https://brainly.com/question/24753206
An unknown compound has the following chemical formula: NxO
where x stands for a whole number.
Measurements also show that a certain sample of the unknown compound contains 5.2 mol of nitrogen and 2.65 mol of oxygen
Write the complete chemical formula for the unknown compound.
Answers
Taking into account the definition of empirical formula, the complete chemical formula for the unknown compound is N₂O.
The empirical formula of a chemical compound shows the ratio between the atoms of the compound. That is, it indicates which elements are present and the minimum ratio in whole numbers between their atoms. The empirical formula is the simplest chemical formula for a chemical compound, which is why it is also called the minimum formula.
The empirical formula must be expressed using integer relationships, then to obtain this formula, divide the numbers of moles by the smallest result of them. In this case:
Nitrogen: [tex]\frac{5.2 moles}{2.65 moles}[/tex]= 1.96 moles ≅ 2 moles
Oxygen [tex]\frac{2.65 moles}{2.65 moles}[/tex]= 1 mole
Being the chemical formula of hte compound NxO, where x stands for a whole number, this indicates that the elements N and O are in the compound in a whole number ratio of x: 1. Then, as in the empirical formula, the numbers of moles must be expressed in whole numbers, as previously calculated, the value of x must be 2.
In summary, the complete chemical formula for the unknown compound is N₂O.
Learn more about empirical formula and its difference with molecular formula: https://brainly.com/question/13058832?referrer=searchResults
is c10H8 a conductor
Answers
Answer:
No
Explanation:
Napthalene cannot conduct electricity
Describe how you would prepare a supersaturated solution
Answers
Answer:
A supersaturated solution contains more dissolved solute than required for preparing a saturated solution and can be prepared by heating a saturated solution, adding more solute, and then cooling it gently. Excess dissolved solute crystallizes by seeding supersaturated solution with a few crystals of the solute.
Explanation:
Balance the following chemical equations.
Fe + H2S04 ------->Fe2(SO4)3 + H2
C2H6 + O2-------> H2O + CO2
KOH + H3PO4 ------->K3PO4 + H2O
SnO2 + H2-------> Sn + H2O
NH3 + O2 ------->NO + H2O
KNO3 + H2CO3-------> K2CO3 + HNO3
B2Br6 + HNO3 ------->B(NO3)3 + HBr
BF3 + Li2SO3 ------->B2(SO3)3 + LiF
9. (NH4)3PO4 + Pb(NO3)4-------> Pb3(PO4)4 + NH4NO3
SeCl6 + O2 ------->SeO2 + Cl2
Answers
Answer:
fe oo andffffe
aiejand iefjwe
eekkfwefwe f
opw fwfwfew
efefwefwefwi
Explanation:
calculate the volume in L od 2.11mol/L CuSo4(aq) solution that contains 0.41 mol copper(2) sulfate
Answers
Answer:
0.194L
Explanation:
Molarity of a solution is its molar concentration, and can be calculated using the formula:
Molarity = no. of moles (n) ÷ volume (V)
According to this question, the molar concentration/molarity of a solution of copper sulfate (CuSO4) is 2.11mol/L and contains 0.41 mol CuSO4. The volume can be calculated as follows;
Volume = no. of moles ÷ molarity
Volume = 0.41mol ÷ 2.11mol/L
V = 0.194 liter
