pt 2 4-7 please helppp

Answer:

We conclude that the population mean is equal to 490.

Step-by-step explanation:

We are given that a random sample of 15 observations is selected from a normal population. The sample mean was 495 and the sample standard deviation 9.

Let [tex]\mu[/tex] = population mean.

So, Null Hypothesis, [tex]H_0[/tex] : [tex]\mu[/tex] = 490      {means that the population mean is equal to 490}

Alternate Hypothesis, [tex]H_A[/tex] : [tex]\mu\neq[/tex] 490     {means that the population mean is different from 490}

The test statistics that will be used here is One-sample t-test statistics because we don't know about population standard deviation;

                               T.S.  =  [tex]\frac{\bar X-\mu}{\frac{s}{\sqrt{n} } }[/tex]  ~ [tex]t_1_4[/tex]

where, [tex]\bar X[/tex] = sample mean = 495

            s = sample standard deviation = 9

             n = sample of observations = 15

So, the test statistics =   [tex]\frac{495-490}{\frac{9}{\sqrt{15} } }[/tex]  ~ [tex]t_1_4[/tex]

                                     =  2.152

The value of t-test statistics is 2.152.

Now, at a 0.01 level of significance, the t table gives a critical value of -2.977 and 2.977 at 14 degrees of freedom for the two-tailed test.

Since the value of our test statistics lies within the range of critical values of t, so we have insufficient evidence to reject our null hypothesis as the test statistics will not fall in the rejection region.

Therefore, we conclude that the population mean is equal to 490.

Answer:

Step-by-step explanation:

Since m and k are the parallel lines and a transverse 'l' is intersecting these lines at two different points.

- Opposite angles at the point of intersection of parallel lines and the transverse will be the vertical angles.

∠1 ≅ ∠3, ∠2 ≅ ∠4, ∠5 ≅ ∠8 and ∠6 ≅ ∠7 [Vertical angles]

- Pair of angles between parallel lines 'k' and 'm' but on the opposite side of the transversal are the alternate interior angles.

∠4 ≅ ∠6 and ∠3 ≅ ∠5 [Alternate interior angles]

- Angles having the same relative positions at the point of intersection are the corresponding angles.

∠2 ≅ ∠6, ∠3 ≅ ∠8, ∠4 ≅ ∠7 and ∠1 ≅ ∠5 [Corresponding angles]

- Co interior angles are the angles between the parallel lines located on the same side of the transversal.

∠4 and ∠5, ∠3 and ∠6 [Co interior angles]

- Co exterior angles are the angles on the same side of the transverse but outside the parallel lines.

∠2 and ∠8, ∠1 and ∠7 [Co exterior angles]

Answer:

6/50

Step-by-step explanation:

There are 50 tiles

6 purple

18 pink

26 orange

P( purple) = purple/ total

                = 6/50

Answer:

3 miles

Step-by-step explanation:

5 + m=8

Subtract 5 from each side

5-5 + m=8-5

m = 3

She needs to swim 3 more miles

Answer:

Yelena needs to swim 3 more miles

Step-by-step explanation:

You need to solve for the variable "m", which represents the miles. Based on the information, Yelena swam 5 miles and she needs to swim 8. Solve:

[tex]5+m=8[/tex]

To find the value of m, you need to isolate it on one side of the equation. To do this, you need to get the 8 and 5 on the same side of the equal operation. For this, you need to use reverse operations. This undoes the value from one side and does the same on the other, keeping the equation balanced. Since we have a "positive 5", we take the opposite, which would be a "negative 5". So subtract 5 from both sides of the equation:

[tex]5-5+m=8-5[/tex]

Simplify. The 5's cancel each other out, leaving 0. 8-5 is 3:

[tex]m=3[/tex]

The total miles left that Yelena needs to swim is 3 miles.

:Done

Question Completion:

WACC = 10.0%

Opportunity cost = $100,000

Net equipment cost (depreciable basis) = $65,000

Straight-line deprec. rate for equipment = 33.333%  

Sales revenues, each year = $123,000

Operating costs (excl. deprec.), each year = $25,000

Tax rate = 35%

Answer:

Century Roofing

Project's NPV is: ($6,578)

Step-by-step explanation:

a) Data and Calculations:

WACC = 10.0%

Opportunity cost = $100,000

Net equipment cost (depreciable basis) = $65,000

Straight-line deprec. rate for equipment = 33.333%  

Sales revenues, each year = $123,000

Operating costs (excl. deprec.), each year = $25,000

Tax rate = 35%

Cash outflow in year 0 = $165,000 (Opportunity and new equipment costs)

Annual Cash inflow = $123,000 - $25,000 - $34,300 = $63,700

PV of annuity for 3 years at 10% = $158,422 ($63,700 x 2.487)

NPV = Cash inflow minus Cash outflow

= $158,422 - $165,000

= ($6,578)

Negative NPV

b) Since Century Roofing could have realized $100,000 from the sale of the building if it decides not to open the new warehouse, this opportunity cost is factored into the calculation of the Net Present Value.  It becomes a present cash outflow.  Century Roofing's opportunity cost is defined as the loss of $100,000 being the future return from the best alternative project when it chooses to build the new warehouse instead of selling off the building.

Add up the P(x) values that correspond to x = 2 through x = 4

0.07+0.22+0.22

So we have a 51% chance of getting an x value such that 1 < x < 5

By using the probability distribution table, the value of P(1<x<5) is 0.51

Probability is the branch of mathematics concerning numerical descriptions of how likely an event is to occur, or how likely it is that a proposition is true

A probability distribution is the mathematical function that gives the probabilities of occurrence of different possible outcomes for an experiment. It is a mathematical description of a random phenomenon in terms of its sample space and the probabilities of events

Given,

We have to find the value of P(1<x<5)

P(1<x<5) = P(2)+P(3)+P(4)

P(2)=0.07

P(3)=0.22

P(4)=0.22

P(1<x<5) = 0.07+0.22+0.22 =0.51

Hence, the value of P(1<x<4)= 0.51

Learn more about Probability and Probability distribution here

https://brainly.com/question/14210034

#SPJ2

Answer:

c. It does not appear to be within statistical control because there is an upward trend.

Step-by-step explanation:

Statistical process control is a method for quality control which employs statistical method to monitor and control process. It ensures operation efficiency and ensuring required specification to reduce wastes in production lines. Here the process variation is out of control because the statistical control has an upward trend.

Answer:

92 inches squared

Step-by-step explanation:

T/P = 8 * 3

L/R = 3 * 2

F/B = 8 * 2

Solving for surface area!

2(24) + 2(6) + 2(16) = 92

Answer:

  0.4 meters

Step-by-step explanation:

The volume is ...

  V = LHB

  12.8 m³ = (8(5B))(5B)(B) = 200B³ . . . fill in given values

  0.064 m³ = B³ . . . . . simplify

  ∛0.064 m = B = 0.4 m

The breadth of the wall is 0.4 meters.

Answer:

3x18 = 3 (10+8) is an example of the commutative property of multiplication

Step-by-step explanation:

Answer: commutative property of multiplication

Step-by-step explanation:

Answer:

M= 521.1 g

Step-by-step explanation:

1st.  Find the volume of the cube:   V=3³=27 cm³

As the weight of V= 1 cm³ cube  is 19.3 g the weight of the cube=27 cm³ is

M=27*19.3= 521.1 g

Answer:

a) f(6)=(6)^2+4(6)+1=65

b)f (x+9)=(x+9)^2+4 (x+9)+1=(x^2+18x+81)+(4x+36)+1=x^2+22x+117

f (-x)=(-x)^2-4x+1

Answer:

The percentage is [tex]P(350 < X 650 ) = 86.6\%[/tex]

Step-by-step explanation:

From the question we are told that

   The population mean is  [tex]\mu = 500[/tex]

     The standard deviation is  [tex]\sigma = 100[/tex]

The  percent of people who write this exam obtain scores between 350 and 650    

    [tex]P(350 < X 650 ) = P(\frac{ 350 - 500}{ 100} <\frac{ X - \mu }{ \sigma } < \frac{650 - 500}{ 100} )[/tex]

Generally  

               [tex]\frac{X - \mu }{\sigma } = Z (The \ standardized \ value \ of \ X )[/tex]

   [tex]P(350 < X 650 ) = P(\frac{ 350 - 500}{ 100} <Z < \frac{650 - 500}{ 100} )[/tex]

   [tex]P(350 < X 650 ) = P(-1.5<Z < 1.5 )[/tex]

   [tex]P(350 < X 650 ) = P(Z < 1.5) - P(Z < -1.5)[/tex]

From the z-table  [tex]P(Z < -1.5 ) = 0.066807[/tex]

   and [tex]P(Z < 1.5 ) = 0.93319[/tex]

=>    [tex]P(350 < X 650 ) = 0.93319 - 0.066807[/tex]

=>  [tex]P(350 < X 650 ) = 0.866[/tex]

Therefore the percentage is  [tex]P(350 < X 650 ) = 86.6\%[/tex]

Correction:

P(AΔB) = P(A) + P(B) - 2P(AnB)

is what could be proven using the axioms of probability, and considering the case of symmetric difference given.

Answer:

P(AΔB) = P(A) + P(B) - 2P(AnB)

Has been shown.

Step-by-step explanation:

We are required to show that

P(AUB) = P(A) + P(B) - 2P(AnB)

directly using the axioms of probability.

Note the following:

AUB = (AΔB) U (AnB)

Because (AΔB) U (AnB) is disjoint, we have:

P(AUB) = P(AΔB) + P(AnB)..................(1)

But again,

P(AUB) = P(A) + P(B) - P(AnB)...............(2)

Comparing (1) with (2), we have

P(AΔB) + P(AnB) = P(A) + P(B) - P(AnB)

P(AΔB) = P(A) + P(B) - 2P(AnB)

Where AΔB is the symmetric difference of A and B.

36×7

=252

Explaination :

First Multiply 6 and 7 we get 42 !

Write 2 and 4 will be added to the product of 3×7

We get 21 and add 4 here

So we get 252

Answer:

[tex]36 \times 7 = 252[/tex]

Step-by-step explanation:

Firstly multiply 6 with 7 you have to write 2 and take 4 carry and then multiply 7 with 3 u get 21 now add the number u carry in 21 u get ur answer. 252.

Hope it helps u mate

Answer:

The velocity is  [tex]v = 886.96 \ m/s[/tex]

Step-by-step explanation:

From the question we are told that

    The period of each revolution is  [tex]T = 1\ day = 24 \ hours[/tex]

    The angle  is [tex]\theta = 30^o[/tex]

     The radius is  [tex]r = 3387.5 \ miles[/tex]

Generally the linear speed is  mathematically represented as

        [tex]v = w * r[/tex]

Where  [tex]w[/tex] is the angular speed which is mathematically represented as

       [tex]w = \frac{2 \pi }{T}[/tex]

substituting values

       [tex]w = \frac{2 *3.142 }{24}[/tex]

        [tex]w = 0.2618 \ rad/s[/tex]

Thus  

         [tex]v = 0.261833 * 3387.5[/tex]

        [tex]v = 886.96 \ m/s[/tex]

Answer:

The true true level of significance of this test is more than 0.01.

Step-by-step explanation:

No standard deviation and we are told that the investigator still used z rather than the more appropriate t - distribution.

This method of using the z-distribution when standard deviation is unknown will definitely result in a smaller critical value and this in turn simply means that the p-value will be smaller than what it should really be.

Thus, it means the critical value is getting closer to the mean value than the way it should be.

Therefore, means that for a given significance of 0.01 and using the z-distribution under this no standard deviation situation, the true true level of significance of this test is more than 0.01.

Answer:

0.0618

Step-by-step explanation:

z = (x - μ)/σ, where

x is the raw score = 69

μ is the sample mean = population mean = 65

σ is the sample standard deviation

This is calculated as:

= Population standard deviation/√n

Where n = number of samples = 25

σ = 13/√25

σ = 13/5 = 2.6

Sample standard deviation = 2.6

z = (69 - 65) / 2.6

z = 4/2.6

z = 1.53846

Approximately to 2 decimal places = 1.54

Using the z score table to determine the probability,

P(x = 69) = P(z = 1.54)

= 0.93822.

The probability that the sample mean is greater than 69 is

P(x>Z) = 1 - 0.93822

P(x>Z) = 0.06178

Approximately to 4 decimal places = 0.0618

Answer:

Its 10x^2+12

Step-by-step explanation:

Answer:

-10X^2+12

Step-by-step explanation:

Step-by-step explanation:

thats shape is a delta

:)

Answer:

arrow head

Step-by-step explanation:

Answer:

(a) The probability that X is at most 30 is 0.9726.

(b) The probability that X is less than 30 is 0.9554.

(c) The probability that X is between 15 and 25 (inclusive) is 0.7406.

Step-by-step explanation:

We are given that 11% of all steel shafts produced by a certain process are nonconforming but can be reworked. A random sample of 200 shafts is taken.

Let X = the number among these that are nonconforming and can be reworked

The above situation can be represented through binomial distribution such that X ~ Binom(n = 200, p = 0.11).

Here the probability of success is 11% that this much % of all steel shafts produced by a certain process are nonconforming but can be reworked.

Now, here to calculate the probability we will use normal approximation because the sample size if very large(i.e. greater than 30).

So, the new mean of X, [tex]\mu[/tex] = [tex]n \times p[/tex] = [tex]200 \times 0.11[/tex] = 22

and the new standard deviation of X, [tex]\sigma[/tex] = [tex]\sqrt{n \times p \times (1-p)}[/tex]

                                                                  = [tex]\sqrt{200 \times 0.11 \times (1-0.11)}[/tex]

                                                                  = 4.42

So, X ~ Normal([tex]\mu =22, \sigma^{2} = 4.42^{2}[/tex])

(a) The probability that X is at most 30 is given by = P(X < 30.5)  {using continuity correction}

        P(X < 30.5) = P( [tex]\frac{X-\mu}{\sigma}[/tex] < [tex]\frac{30.5-22}{4.42}[/tex] ) = P(Z < 1.92) = 0.9726

The above probability is calculated by looking at the value of x = 1.92 in the z table which has an area of 0.9726.

(b) The probability that X is less than 30 is given by = P(X [tex]\leq[/tex] 29.5)    {using continuity correction}

        P(X [tex]\leq[/tex] 29.5) = P( [tex]\frac{X-\mu}{\sigma}[/tex] [tex]\leq[/tex] [tex]\frac{29.5-22}{4.42}[/tex] ) = P(Z [tex]\leq[/tex] 1.70) = 0.9554

The above probability is calculated by looking at the value of x = 1.70 in the z table which has an area of 0.9554.

(c) The probability that X is between 15 and 25 (inclusive) is given by = P(15 [tex]\leq[/tex] X [tex]\leq[/tex] 25) = P(X < 25.5) - P(X [tex]\leq[/tex] 14.5)   {using continuity correction}

       P(X < 25.5) = P( [tex]\frac{X-\mu}{\sigma}[/tex] < [tex]\frac{25.5-22}{4.42}[/tex] ) = P(Z < 0.79) = 0.7852

       P(X [tex]\leq[/tex] 14.5) = P( [tex]\frac{X-\mu}{\sigma}[/tex] [tex]\leq[/tex] [tex]\frac{14.5-22}{4.42}[/tex] ) = P(Z [tex]\leq[/tex] -1.70) = 1 - P(Z < 1.70)

                                                          = 1 - 0.9554 = 0.0446

The above probability is calculated by looking at the value of x = 0.79 and x = 1.70 in the z table which has an area of 0.7852 and 0.9554.

Therefore, P(15 [tex]\leq[/tex] X [tex]\leq[/tex] 25) = 0.7852 - 0.0446 = 0.7406.

Answer:

Step-by-step explanation:

∠a is alternate interior angle to ∠ECD

∠b is alternate interior angle to ∠BCD

so:

If AB || CD then:

m∠a = m∠ECD = 25° + 42° = 67°

m∠b = 42°

Answer:

150<60+30n

Step-by-step explanation:

150 is the maximum amount that she can spend on gas. (which is the total)

she already spend $60

each fill up (n) costs 30

Answer:

the answer is B)

Step-by-step explanation:

Answer:

[tex]\large \boxed{31/63}[/tex]

Step-by-step explanation:

5/7 - 2/9

Make denominators equal by LCM.

(5 × 9)/(7 × 9) - (2 × 7)/(9 × 7)

45/63 - 14/63

Subtract fractions since denominators are equal.

(45 - 14)/63

31/63

Answer:

[tex]\frac{31}{63}[/tex]

Step-by-step explanation:

Therefore, the answer is [tex]\frac{31}{63}[/tex].

Answer:

Option A (repeated measures design) is the correct option.

Step-by-step explanation:

The other three options are not related to the given instance. So that alternative A would be the correct choice.

Answer:

d. all of the above

Step-by-step explanation:

A one sample z test measures whether the mean of a population is greater, less or equal to a specific value. It is called one sampl z test since the standard normal distribution is used in calculation of critical values. It makes use of the null hypothesis and alternative hypothesis in determining if the mean is greater than or equal or less than the reference value. Variance and standard deviation is assumed to be known and at least one population is used

Answer:

To find the volume of this cube, you would have to multiply 1.08 by 5.25 by 3.3 feet. If you did this, you would get: 18.711 feet^3. This is the volume of the rectangular prism.

Hope this helped!

Explanation:

We have 4 options for the first choice and 3 options for the next. So there are 4*3 = 12 different combos possible. The tree diagram below shows 12 different paths to pick from. For instance, the right-most path has us pick the number 4 and the color yellow.