Question 1
Compound Y is thermally decomposed with carbon using the apparatus below.
Reaction tube
Compound Y
and carbon
1
Heat
Limewater
A brown solid is formed in the reaction tube and the limewater turns cloudy.
What is compound Y?
А
Copper (11) oxide
B
Calcium oxide
с
Magnesium oxide
D
Sodium oxide
Answers
A brown solid is formed in the reaction tube and the lime water turns cloudy. The compound Y is calcium hydroxide. Therefore, A is correct.
What is lime water ?The common name for a saturated aqueous calcium hydroxide solution is lime water. At room temperature, calcium oxide (Ca(OH)2) is only weakly soluble in water.
Saturated calcium hydroxide solution is sometimes known as lime water or milk of lime. Ca(OH)2 is its chemical formula. Instead of the fruit sense of lime, the name is based on the mineral sense of lime. Lime wash is the name given to lime water used as paint.
Slaked lime, often known as calcium hydroxide, is an inorganic substance having the chemical formula Ca(OH)2. When water is combined with quicklime (calcium oxide), a colorless crystal or white powder is created.
Thus, option A is correct.
To learn more about lime water, follow the link;
https://brainly.com/question/14528027
#SPJ2
Related Questions
How is melting simillar evaporation
Answers
Answer:
Melting and evaporation both represent changes in matter that involve behavior at the molecular level.
Answer:
well both disappear over time
Explanation:
What is the density of an object that has a mass of 1.08 kg and displaces 50.50 cm3 of water? (Please report your answer in g/cm3 ) Please report your answer in decimal notation not scientific notation the computer will mark it incorrect.
Answers
Answer:
Explanation:
1.08kg/50.5 cm^3(1000g/kg)=21.386 g/cm^3
Answer:
[tex]\boxed {\boxed {\sf 21.4 \ g/cm^3}}[/tex]
Explanation:
We are asked to find the density of an object.
The density of a substance is its mass per unit volume. It is calculated by dividing the mass by the volume.
[tex]\rho= \frac{m}{v}[/tex]
The mass of the object is 1.08 kilograms. The object displaced 50.50 cubic centimeters of water, so this value is its volume.
We are asked to give the density in grams per cubic centimeter, so we must convert the mass. There are 1000 grams in 1 kilogram. Set up a conversion factor.
[tex]\frac {1000 \ g}{1 \ kg}[/tex]
Multiply by the given mass: 1.08 kg
[tex]1.08\ kg *\frac{1000 \ g }{ 1\ kg}[/tex]
The units of kilograms cancel.
[tex]1.08*\frac{1000 \ g }{1}[/tex]
[tex]1.08*{1000 \ g } = 1080 \ g[/tex]
Now we know the mass in grams and the volume:
m= 1080 g v= 50.50 cm³Substitute the values into the density formula.
[tex]\rho= \frac{1080 \ g }{50.50 \ cm^3}[/tex]
Divide.
[tex]\rho= 21.3861386 \ g/cm^3[/tex]
The original measurements of mass and density have 3 and 4 significant figures. Our answer must have the least number of significant figures, or 3.
For the number we found, that is the tenths place. The 8 in the hundredth place tells us to round the 3 in the tenths place up to a 4.
[tex]\rho \approx 21.4 \ g/cm^3[/tex]
The density of the object is approximately 21.4 grams per cubic centimeter.
The specific heat of a certain type of cooking oil is 1.75J(g. °C). How much heat energy is needed to raise the temperature of 2.44 kg of this oil from 23. °C to 191 °C?
Answers
Answer:
The amount of heat needed is 593.88 kJ.
What best describes the transition from gas to liquid
Answers
It's condensation in which gas particles have a higher kinetic energy..
An element with 7 valence electrons would be a
O + 7 cation
0 - 1 anion
0 - 7 cation
O + 1 anion
Answers
Answer:
The Group 7A elements have seven valence electrons in their highest-energy orbitals (ns2np5). This is one electron away from having a full octet of eight electrons, so these elements tend to form anions having -1 charges, known as halides: fluoride, F-; chloride, Cl-, bromide, Br-, and iodide, I-.
...
Group 7A — The Halogens.
(7)
(8)
(9)
(10)
Explanation:
here is your answer hope you will enjoy and mark me as brainlist
thank you
What is an example of microorganisms acting in a harmful way?
Answers
Answer:
Mark me as brainlest
Explanation:
Microorganisms present in our body Re viruses, bacteria, fungi, algae, and protozoa among which most of them cause immense benefits to the body. There are some harmful microorganisms too known as pathogens which cause disease and cause a threat to all existing life forms of the earth which can result in death at times.
Answer:
An example of microorganisms acting in a harmful way is a bacteria spoiling food.
T("C) = 2
T, ("C) =
AT ("C) =
(J/g °C) = 3.77
M(9) = 340g
(J) = 10,000
what is the change in temperature? And what is the final temperature?
Answers
Answer:
1.377
Explanation:
Because we are subtract the initial from the final
When the volume of a closed container containing hydrogen gas is increased by a factor of two, how will this affect the number of hydrogen atoms in the container
Answers
We have that for the Question "When the volume of a closed container containing hydrogen gas is increased by a factor of two, how will this affect the number of hydrogen atoms in the container"
Answer:
Number of hydrogen atoms depend only on amount of gas which remains constant. Hence, increasing the volume of container has no affect on number of hydrogen atoms.Explanation:
The number of hydrogen atoms will remain the same in the container. Because the container is closed and amount of hydrogen gas remains constant, which means that no extra amount of hydrogen gas is removed or added from the container when volume increases.
For more information on this visit
https://brainly.com/question/17756498
A fruit-and-oatmeal bar contains 142 nutritional Calories. Convert this energy to calories
Answers
Answer:
a fruit and oatmeal bar contains 142000 calories.
A nutritional calorie, or kilocalorie, is equal to 1000 calories.
E = 142 kcal · 1000 cal/kcal.
E = 142 000 cal.
Calorie (cal), or small calorie, is the amount of energy needed to heat one gram of water by one degree Celsius.
One small calorie is approximately 4.2 joules.
A calorie is a unit of energy.
Explanation:
hope it helps :)
A student would like to determine how heating a liquid changes its volume. The student hypothesizes that the liquid will increase in volume. The following list shows the steps taken by the student in order to test the hypothesis.
1.Select the liquid to test.
2.Place the liquid in a sealed container.
3.Use a Bunsen burner to heat the liquid by 10°C.
4.Measure the volume of the liquid.
5.Record the results.
What is wrong with how the student conducted the investigation?
A.
The hypothesis was not valid because it is impossible for liquids to change in volume.
B.
The volume of the liquid should be measured before it is heated.
C.
The student should have increased the temperature of the liquid by more than 10ºC.
D.
The length of time it took for the liquid to be heated should be measured.
Answers
Answer:
The volume of the liquid should be measured before it is heated.
Explanation:
Because During an experiment to test how a variable changes a substance, it is important to first observe and record the characteristics of the substance before the variable is introduced. In this case, the variable is heat energy.
Which statement correctly explains how matter is conserved in chemical reactions? (1 point)
Answers
Answer:
can you include the choices?
Explanation:
Answer:
Answer b: The law of conservation of matter says that in chemical reactions, the total mass of the products must equal the total mass of the reactants.
Explanation:
hope this helps
Name the element in the second period of the periodic table with 6 valence electrons.
Answers
Answer:
Sulfur
Explanation:
Using this to make the answer 20 characters long
What is the numerical value of the standard entropy change of formation, delta S degree, for BrCl(g) at 298 K
Answers
Answer:
B)
Explanation:
Which correctly describes the lithosphere? *
A.The crust and the upper part of the core
B.The crust and the upper part of the ocean
C.The crust and the upper part of the mantle
D.The core and the upper part of the mantle
Answers
Answer:
its for sure not b. its c the crust and upper part of the mantle.
the whole definition:
the rigid outer part of the earth, consisting of the crust and upper mantle.
how many chemical bonds are formed in CH4 molecule
Answers
Answer:
4 covalent bonds
Which is not an example of vaporization?
Answers
Answer:
boi i need the choices idiot
Explanation:
Nobody can add an answer without context.
But if this helps,
"Vaporization of an element or compound is a phase transition from the liquid phase to vapour. There are two types of vaporization: evaporation and boiling. Evaporation is a surface phenomenon, whereas boiling is a bulk phenomenon." - Wikipedia
https://en.wikipedia.org/wiki/Vaporization
are ions always smaller than their neutral atoms
Answers
Answer:
The negative ion is larger than the original atom. but the same number of positive protons, the size of the ionic radius will increase. When an atom has its electrons attracted to another atom it becomes a positive ion. The positive ion is smaller than the original atom.
0.500 mol aluminium hydroxide, Al(OH)3 reacts with 0.500 mol sulphuric acid, H2SO4 to produce aluminium sulphate and water.
a) Write the balanced equation for the reaction.
b) Which reactant is limiting reactant?
c) How many moles of excess reactant is used in the experiment?
d)Determine how many moles of aluminium sulphates was obtained if the percentage yield of aluminium sulphate during the experiment is 77%.
[9 marks]
Answers
a) The balanced equation for the reaction would be as follows:
[tex]2 Al(OH)_3 + 3 H_2SO_4 ---> Al_2(SO_4)_3 + 6 H_2O[/tex]
b) The mole ratio of aluminum hydroxide to sulfuric acid is 2:3. This means that every 1 mole of the aluminum hydroxide would require 1.5 moles of sulfuric acid.
0.5 mole aluminum hydroxide would require:
0.5 x 3/2 = 0.75 moles of sulfuric acid.
But only 0.500 moles of sulfuric acid is present. Thus, the limiting reagent is sulfuric acid.
c) With 0.5 moles sulfuric acid, the mole of aluminum hydroxide required would be:
0.5 x 2/3 = 0.33
Excess moles of aluminum hydroxide = 0.5 - 0.33
= 0.17 moles
d) The mole ratio of sulfuric acid to aluminum sulfate produced is 3:1. With 0.5 moles sulfuric acid, the mole of aluminum sulfate produced would be:
0.5 x 1/3 = 0.17 moles
But the percentage yield is 77%
77/100 x 0.17 = 0.13 moles
Thus, the moles of aluminum sulfate that would be obtained with a percentage yield of 77% would be 0.13 moles.
More on stoichiometric calculations can be found here: https://brainly.com/question/8062886
PLEASE HELP ASAPPPPPP
Answers
Answer:
accelerating upward would be your answer
Um Is it in third period and has three electrons in its highest P orbitals
Answers
Answer:
Shut yo musty dusty ah up zaddy
Explanation:
come here big mami
The organelle is found in plant cells contains a green pigment and is the site of photosynthesis. this organelle is the _______
Answers
Reasoning: I just had my 830th lesson in school about these
Answer: Chloroplast
Explanation:
0.500 mol aluminium hydroxide, Al(OH)3 reacts with 0.500 mol sulphuric acid, H2SO4 to produce aluminium sulphate and water.
a) Write the balanced equation for the reaction.
b) Which reactant is limiting reactant?
c) How many moles of excess reactant is used in the experiment?
d)Determine how many moles of aluminium sulphates was obtained if the percentage yield of aluminium sulphate during the experiment is 77%. [9 marks]
Answers
The number of moles of excess reactant is used in the experiment is 0.33 moles. The number of moles of aluminium sulphates was obtained 0.129 moles if the percentage yield is 77%.
2Al(OH)3(aq) + 3H2SO4(aq) -----> Al2(SO4)3(aq) + 6H2O(l)
Number of moles of Al(OH)3 = 0.500 mol
Number of moles of H2SO4 = 0.500 mol
We have to determine the limiting reactant as follows;
2 moles of Al(OH)3 reacts with 3 moles of H2SO4
0.500 moles of Al(OH)3 reacts with 0.500 moles × 3 moles/2 moles
= 0.75 moles of H2SO4.
This means that H2SO4 is limiting reactant
Since 3 moles of H2SO4 reacts with 2 moles of Al(OH)3
0.500 moles of H2SO4 reacts with 0.500 × 2 moles /3 moles
= 0.33 moles
Only 0.33 moles of excess reactant was used in the experiment.
3 moles of H2SO4 yields 1 mole of Al2(SO4)3
0.500 moles of H2SO4 yields 0.500 moles × 1 mole/3 moles = 0.167 moles
Theoretical yield of Al2(SO4)3 = 0.167 moles
% yield = actual yield/Theoretical yield × 100/1
Actual yield = % yield × Theoretical yield /100
Actual yield = 77 × 0.167/100
Actual yield = 0.129 moles
Learn more: https://brainly.com/question/11155928
What mass of LiOH would need to be dissolved in 500.0 mL of water to produce a solution with a pH of 12.40
Answers
Taking into account the definition of pH and pOH, the mass of LiOH needed to be dissolved in 500.0 mL of water to produce a solution with a pH of 12.40 is 0.299375 grams.
First of all, pH is a measure of acidity or alkalinity that indicates the amount of hydrogen ions present in a solution or substance.
The pH is defined as the negative base 10 logarithm of the activity of hydrogen ions, that is, the concentration of hydrogen ions or H₃O⁺:
pH= - log [H⁺]= - log [H₃O⁺]
Similarly, pOH is a measure of hydroxyl ions in a solution and is expressed as the logarithm of the concentration of OH⁻ ions, with the sign changed:
pOH= - log [OH⁻]
The following relationship can be established between pH and pOH:
pOH + pH= 14
In this case, being pH= 12.40, pOH is calculated as:
pOH + 12.40= 14
pOH= 14 - 12.40
pOH= 1.60
Replacing in the definition of pOH the concentration of OH⁻ ions is obtained:
- log [OH⁻]= 1.60
Solving:
[OH⁻]= 10⁻¹ ⁶
[OH⁻]= 0.025 M
Then, the [OH⁻] is 0.025 M.
Strong bases are bases that completely dissociate in water into the cation and OH - (hydroxide ion). LiOH is a strong base, so the OH- concentration is equal to the LiOH concentration:
[OH⁻]= [LiOH]= 0.025 M
Finally, Molarity or Molar Concentration is the number of moles of solute that are dissolved in a certain volume:
[tex]Molarity=\frac{number of moles}{volume}[/tex]
In this case, knowing that molarity is 0.025 M and the volume is 500 mL= 0.5 L, you can replace in the expression for molarity:
[tex]0.025 M=\frac{number of moles}{0.5 L}[/tex]
Solving:
number of moles= 0.025 M× 0.5 L
number of moles= 0.0125 moles
Finally, since the molar mass of LiOH is 23.95 [tex]\frac{g}{mol}[/tex], that is, the amount of mass that the substance contains in one mole, the mass of LiOH that 0.0125 mol contains can be calculated as:
0.0125 mol×23.95 [tex]\frac{g}{mol}[/tex]= 0.299375 g
The mass of LiOH needed to be dissolved in 500.0 mL of water to produce a solution with a pH of 12.40 is 0.299375 grams.
Learn more:
https://brainly.com/question/12200689brainly.com/question/16032912?referrer=searchResultsbrainly.com/question/13557815?referrer=searchResultsRecord your observations.
8th grade k12 science
Answers
If 20.3 g of NO and 13.8 g of O₂ are used to form NO₂, how many moles of excess reactant will be left over?
2 NO (g) + O₂ (g) → 2 NO₂ (g)
Answers
Answer:
0.02 moles of O₂ will be leftover.
Explanation:
How much is 1 mole of something?
O A. 6.02 x 10
O B. 6.02 x 10-23
O C. 6.02 × 23
O D. 6.02 x 1023
Answers
Answer:
see explanation
Explanation:
How much is 1 mole of something?
O A. 6.02 x 10
O B. 6.02 x 10-23
O C. 6.02 × 23
O D. 6.02 x 1023
look carefully at your picture
use a magnifying glass if you need to
I am rewriting the choices the way it appears i your picture
A. 6.02 X 10
B 6.02 X 10^-23
C. 6.02^23
D. 6.02 X 10^23
the answer is D. you left out "to the pow......"
a significant mistake
what is in your picture is 6.02 X 10^23 and means
6.02 X 100,000,000,000,000,000,000,000
what you wrote 6.02 X 1023 means 6158
when we are talking about the number of teensy tiny atoms in a measurable mass we are talking BIGGGGG GIANTTTTT numberswhen written correctly, the answer is D
To determine the heat of neutralisation, Chelsea placed 50 cm' of sodium hydroxide
solution of concentration 1.0 mol dm- in a polystyrene cup and recorded its
temperature. She then recorded the temperature of 50 cm of sulfuric acid, added it
to the cup, stirred the solution and recorded its maximum temperature, as follows:
. initial temperature of NaOH(aq) = 29.5 °C
. initial temperature of H.SO, (aq) = 29.9 °C
• maximum temperature of the solution = 35.8 °C
Calculate the increase in temperature
Answers
2 solutions of NaOH and H₂SO₄ at 29.5 °C are mixed in a coffee-cup calorimeter and after the reaction is completed the temperature is 35.8 °C. The increase in the temperature is 6.3 °C.
To determine the heat of neutralization, Chelsea used a coffee-cup calorimeter.
Initially, she had 2 solutions, NaOH and H₂SO₄, both at 29.5 °C. Upon mixing, the heat was evolved and the final temperature of the solution was 35.8 °C. The neutralization reaction was:
NaOH + H₂SO₄ ⇒ Na₂SO₄ + H₂O
The increase in temperature (ΔT) is equal to the difference between the final temperature and the initial temperature.
[tex]\Delta T = 35.8 \° C - 29.5 \° C = 6.3 \° C[/tex]
This data can be used to calculate the heat of neutralization (q) using the following expression.
[tex]q = c \times m \times \Delta T[/tex]
where,
c is the specific heat capacity of the solutionm is the mass of the solution2 solutions of NaOH and H₂SO₄ at 29.5 °C are mixed in a coffee-cup calorimeter and after the reaction is completed the temperature is 35.8 °C. The increase in the temperature is 6.3 °C.
Learn more: https://brainly.com/question/4040029
why the table perdioc has 3 columns in its group 8 ,
i need reference about that please
Answers
Answer: It just haven’t been discovered yet
Explanation:
Because the periodic table was discovered long ago some elements haven’t been discovered thats why it maybe has 3 columns
THE POINT (-7,4) IS REFLECTED OVER THE LINE X=-3. THEN, THE RESULTING POINT IS REFLECTED OVER THE LINE Y=X. WHERE IS THE POINT LOCATED AFTER BOTH REFLECTIONS?
Answers
Answer: 4,2
The graph should show how to do it.
Which candle burned the longest time why
Answers
Answer:
The one that burned longer because it burned longer
Explanation:
Why: slowest due to the hardness of the wax and the high temperature needed to melt the wax
