Question 2 of 10
A wave has a wavelength of 0.05 m and a wave speed of 10 m/s. What is the
frequency of the wave?
O A. 5.0 Hz
B. 200 Hz
C. 2.0 Hz
O D. 0.50 Hz

Answer:

It is 40.08 g

Explanation:

[tex]6.02 \times 10 {}^{23} \: atoms = 1 \: mole = 40.08 \: g[/tex]

Answer:

D. A negative externality.

Explanation:

Particulate pollution is a form of pollution that is responsible for the degradation of the environment.

Particulate matter is also referred to as particle pollution or atmospheric aerosol particles and it can be defined as a complex microscopic mixture of liquid droplets and solid particles that are suspended in air.

An externality is typically an unwarranted cost or benefit by a manufacturer or producer of goods and services that affects a third party.

In Economics, an externality could either be positive or negative depending on its effect on a third party.

A negative externality arises when the production or consumption of a finished product or service has negative impact (cost) on a third party.

In conclusion, air pollution is an example of a negative externality because it causes harm to a third party.

Answer:

i) densidad

ii) conductividad eléctrica

Explanation:

Las propiedades características de una sustancia se denominan también propiedades intrínsecas. Estas son propiedades que no dependen de la cantidad de sustancia presente.

Las propiedades características se pueden utilizar para identificar una sustancia porque son propiedades que siempre debe exhibir la sustancia.

Entre las opciones, podemos encontrar las siguientes sustancias características;

i) densidad

ii) conductividad eléctrica

Answer:

He is incorrect. Dissolving salt in water and evaporation of the water are both physical changes. The reappearance of salt is evidence that the change was reversible by a physical change, so it could not be a chemical change.

Answer:c

Explanation:

Answer:

  W = 3.75 kJ

Explanation:

Power is defined by the relational

          P = W / t

          W = P t

the yield is 25% = 0.25

           W = 0.25 Wo

           W = 0.25 250 60

           W = 3750 J

            W = 3.75 kJ

Answer:

So every hour he makes 10 miles.  So he would take 1 and a half hours to go to Mcdonalds 15 miles away.

Explanation:

[tex]\huge\boxed{{\textsf{90 minutes}}}[/tex]

We know that Mike's speed is [tex]\dfrac{10\ \text{miles}}{60\ \text{minutes}}[/tex] since there are [tex]60[/tex] minutes in an hour, and we know that MIke needs to travel [tex]15[/tex] miles. We'll model this using fractions:

[tex]\dfrac{10\ \text{miles}}{60\ \text{minutes}}=\dfrac{15\ \text{miles}}{x\ \text{minutes}}[/tex]

We can see that there is a [tex]2:3[/tex] ratio here, so we'll divide the left fraction by [tex]2[/tex] and multiply it by [tex]3[/tex] to get the right fraction.

[tex]\dfrac{10}{60}\Rightarrow\dfrac{5}{30}\Rightarrow\dfrac{15\ \text{miles}}{\boxed{90\ \text{minutes}}}[/tex]

Answer:

El peso = 245 Newton

Explanation:

Dados los siguientes datos;

Masa = 25 kg

Para encontrar el peso del perro en la tierra;

El peso se puede definir como la fuerza que actúa sobre un cuerpo o un objeto como resultado de la gravedad.

Matemáticamente, el peso de un objeto viene dado por la fórmula;

[tex] El \; peso = mg [/tex]

Dónde;

m es la masa del objeto.

g es la aceleración debida a la gravedad.

Sabemos que la aceleración debida a la gravedad es igual a 9,8 m / s² en el planeta Tierra.

Sustituyendo en la ecuación, tenemos;

[tex] W = 25 * 9.8[/tex]

El peso = 245 Newton

Answer:

[tex]x=0.0498[/tex]

[tex]x'=0.659[/tex]

Explanation:

Specific Volume [tex]V=0.2m_3/kg[/tex]

Absolute Pressure (a) [tex]P_a= 40kpa[/tex]

Giving

[tex]T_a=75.87[/tex]

[tex]v_f=1.265*10^{-3}m^3/kg[/tex]

[tex]v_g=3.993m^3/kg[/tex]

                               (b) [tex]P_a= 630kpa[/tex]

Giving

[tex]T_b=160.13C[/tex]

[tex]v_f'=1.10282*10^{-3} m^3/kg[/tex]

[tex]v_g'=0.30286 m^3/kg[/tex]

(a)

Generally the equation for quality of Steam X  is mathematically given by

[tex]x=\frac{v-v_f}{v_g-v_f}[/tex]

[tex]x=\frac{0.2-1.0265*10^{-3}}{3.993-1.0265*10^{-3}}[/tex]

[tex]x=0.0498[/tex]

(b)

Generally the equation for quality of Steam X  is mathematically given by

[tex]x'=\frac{v-v_f'}{v_g'-v_f'}[/tex]

[tex]x'=\frac{0.2-1.10*10^{-3}}{3.30-1.1*10^{-3}}[/tex]

[tex]x'=0.659[/tex]

Answer:

I think true

Explanation:

I hope I'm right and I hope it helps

Answer:

true

Explanation:

basta yun yung sagot ko

Work is equal to the magnitude of the force multiplied by the displacement x. Assuming Magali is pushing the phone, so that the force and displacement point in the same direction, then the work done is positive, and

2.7 J = (4.5 N) x   ==>   x = (2.7 J) / (4.5 N) = 0.60 m

Even if she was pulling the phone instead, the displacement would be the same, but the work done would be negative and the force would point in the opposite direction, thus also having a negative sign:

-2.7 J = (-4.5 N) x   ==>  x = 0.60 m

Answer:

[tex]n _{v} = \frac{c}{v} \\ = \frac{3 \times {10}^{8} }{2.30 \times {10}^{8} } \\ = 1.30[/tex]

This question involves the concept of refractive index.

The refractive index of the vinegar is "1.3".

The refractive index is defined as the ratio of the speed of light in air and the speed of light in the given medium which is vinegar here.

[tex]\eta = \frac{c}{v}[/tex]

where,

Therefore,

[tex]\eta = \frac{3\ x\ 10^8\ m/s}{2.3\ x \10^8\ m/s}[/tex]

η = 1.3

Learn more about refractive index here:

https://brainly.com/question/23750645

#SPJ2

Answer:

It is a song called Come out and Play. It is released on 1994 in a Album called Smash. It comes under Punk-Rock.

I hope i answered your Question.

Answer:

Explanation:

Adding to the other answer, this song is about violence in streets and schools among young people involved in gangs; how they have little hope for their future. Band member Dexter got idea to make the song while he was in college.

Answer:

diffraction phenomenon

Explanation:

When you place your finger in front of a flash, you have a diffraction phenomenon whereby the light fills a part of the space with the first maximum diffraction.

In this case the phenomenon of geometric optics cannot explain the process of bending the beam around an object.

Answer:

p = 120000 kg · m/s

Explanation:

p = mv

p=momentum

m=mass

v=velocity

p = (4800)(25)

p= 120000 kg · m/s

Answer:

[tex]momentum = mass \times velocity \\ = 4800 \times 25 \\ = 120000 \: kgm {s}^{ - 1} [/tex]

Answer:

B.

Hope this helps

Answer:

ans: 6 m/s

Explanation:

spaceship 1 has mass= 150kg

initial momentum of spaceship 1 = 900 kg•m/s

we know,

momentum = mass × velocity

so,

velocity = momentum/mass

= 900 / 150

= 6 m/s

since we know it was initial momentum so, velocity is initial speed,

Answer:

If the collector of the cell is covered, the voltage is higher

Explanation:

The collector of the a passive, active, or photovoltaic (PV) solar cell is the device that takes the Sun's energy by the absorption of the Sun's radiation which is then transformed into electricity and heat. The ability to absorb the Sun's energy is given by the material type and the coating of solar collector

Therefore, the device requires access to energy from Sunlight to get the energy which can be stored in a rechargeable cell and well the collector's cell is covered, access to Sunlight is denied and therefore energy is not supplied to the cells and current is not generated and there is no flow of electricity and the voltage in the circuit is lower or there is no voltage in the circuit

The statement which is wrong about the solar cell is therefore, that if the collector of the cell is covered, the voltage is higher

Answer:

The car is speeding up in a negative direction.

Explanation:

Answer:

OK HERE

Explanation:

When raising a power to a power in an exponential expression, you find the new power by multiplying the two powers together. For example, in the following expression, x to the power of 3 is being raised to the power of 6, and so you would multiply 3 and 6 to find the new power.

Answer:

[tex]N_P = 40\ N_S[/tex]

To reduce the output voltage to 6v in transformers if the input voltage is 240v​, we need to have 40 times as many turns in the primary coil as there are in the secondary coil.

Explanation:

The change in voltage of a transformer depends upon the turns ratio of the transformer between secondary and primary coil. Following formula can be used to determine the turns ratio in this case:

[tex]\frac{N_P}{N_S} = \frac{V_P}{V_S} \\\\[/tex]

where,

[tex]N_P[/tex] = No. of turns in the primary coil

[tex]N_S[/tex] = No. of turns in the secondary coil

[tex]V_P[/tex] = voltage in the primary coil = 240 V

[tex]V_S[/tex] = voltage in the secondary coil = 6 V

Therefore,

[tex]\frac{N_P}{N_S} = \frac{240\ V}{6\ V} \\\\N_P = 40\ N_S[/tex]

To reduce the output voltage to 6v in transformers if the input voltage is 240v​, we need to have 40 times as many turns in the primary coil as there are in the secondary coil.

Answer:

Original Length = L1

Stretched length =L2

From

R = pl/A

R=Resistance

p=Resistivity

A=Cross-sectional Area

l= length of wire

We can see that Resistance is directly Proportional to Length... Meaning that Resistance Increases also as Length increases.

R1/L1 = R2/L2

From the question... The key to note is this sentence

"The Stretched length is TWICE the Original Length"

Meaning

L2 = 2L1 (So replace L2 as 2L1 when solving)

R1=20ohms

Let R2 = k

Applying the formula

20/L1 = k/2L1

kL1 = 20x 2 L1

KL1 = 40L1

L1 cancels on both sides

k=40ohms.

So As the length doubled... The Resistance did too

from 20ohms to 40ohms

Answer:

Gravitational force becomes sixteen times lesser. The strength of the gravitational force between two objects is dependent on their mass. Gravitational force will be weaker if the objects move further away from each other.

This was used to solve for the gravitational force,

G = gravitational constant

m = mass of the first object

M = mass of the second object

d = distance between the two objects

[G * (m*M) / 16d^2] = 1/16

Answer: 10 V, 40 V

Explanation:

Given

Resistors are [tex]500\Omega[/tex] and [tex]2000\Omega[/tex]

Power supply [tex]V=60\ V[/tex]

Voltmeter internal resistance [tex]r=2000\ \Omega[/tex]

When it connected around [tex]500\Omega[/tex] resistance, effective resistance becomes

[tex]\Rightarrow \dfrac{1}{R}=\dfrac{1}{500}+\dfrac{1}{2000}\\\\\Rightarrow R=\dfrac{2000}{5}\\\\\Rightarrow R=400\ \Omega[/tex]

Total resistance in series [tex]R_{net}=2400\ \Omega[/tex]

Current in circuit

[tex]I=\dfrac{60}{2400}=\dfrac{1}{40}\ A[/tex]

Voltage around [tex]500\Omega[/tex] resistance is

[tex]V=\dfrac{1}{40}\times 400\\\\V=10\ V[/tex]

(B) when voltmeter is connected around [tex]2000\Omega[/tex]  resistor

Net resistance around it

[tex]\Rightarrow \dfrac{1}{R}=\dfrac{1}{2000}+\dfrac{1}{2000}\\\\\Rightarrow R=1000\ \Omega[/tex]

Total resistance [tex]R_{net}=1500\ \Omega[/tex]

Current in circuit

[tex]I=\dfrac{60}{1500}=\dfrac{1}{25}\ A[/tex]

Voltage around [tex]2000\Omega[/tex] resistor

[tex]V=\dfrac{1}{25}\times 1000\\\\V=40\ V[/tex]

Answer:

Matter is a substance that has inertia and occupies physical space. According to modern physics, matter consists of various types of particles, each with mass and size.Matter can exist in several states, also called phases. The three most common states are known as solid, liquid and gas.Matter is the Stuff Around You or Atoms and compounds are all made of very small parts of matter. Those atoms go on to build the things you see and touch every day. Matter is defined as anything that has mass and takes up space (it has volume).Solid ice, water and steam are few examples of matter touched in everyday life. Subatomic particles are also considered as matter.

Answer:

Matter is everything around you. Atoms and compounds are all made of very small parts of matter. Those atoms go on to build the things you see and touch every day. Matter is defined as anything that has mass and takes up space (it has volume).

hope it helps...

Explanation:

everything can be found in the picture

Answer:

But where are the graphs

Coulomb's Law describes the relationship between electromagnetic force and the distance between charges.

The relationship between electromagnetic force and the distance between charges is described by Coulomb's Law, which states that the force between two charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them. Mathematically, Coulomb's Law is expressed as:

F = k  (q₁x q₂) / r²

where F is the electromagnetic force, q1 and q2 are the charges, r is the distance between the charges, and k is the Coulomb constant.

This means that as the distance between two charges increases, the force between them decreases, and as the distance decreases, the force increases. The relationship between force and distance is inverse square, which means that the force decreases rapidly as the distance increases.

To know more about electric charges follow

https://brainly.com/question/874116

#SPJ6

Answer:

WHat do you mean by that

Explanation:

I dont get what you re asking

Answer:

Parallel combination

Explanation:

When the two resistances are connected in parallel then the equivalent resistance is

[tex]\frac{1}{R}=\frac{1}{R'}+\frac{1}{R''}[/tex]

To get the minimum resistance of a circuit, the circuit components should be connected in parallel combination.

In the parallel combination, the voltage across each resistor is same and the current is divided in every resistance according to the resistances.