Question:
Define Force​

Answers

Answer 1

Force is push or pull....

thank you


Related Questions

The _____________ variable is observed, measured, and affected by the independent variable.​

Answers

the dependent variable

Answer: It would be the dependent variable.

Explanation:

The dependent variable is limited and can be affected by the changes and manipulation of the independent variable.

Please Help Me!!!
Water is a colorless and odorless liquid. It can exist in solid, liquid, and gas states. It boils at 100 degrees C and melts at 0 degrees C.
Which option best describes this information?
A.
These are the physical properties of water.
B.
These are the chemical properties of water.
C.
These are the physical changes water undergoes.
D.
These are the chemical changes water undergoes.
E.
These are the molecular changes water undergoes.

Answers

Answer:

There are the molecular changes water undergoes

A squash ball with an initial velocity of 19.21 m/s [W] is hit by a squash racket, changing its velocity to 40.22 m/s [E] in 0.312 s. What is the squash ball’s average acceleration?

Answers

Acceleration = (change in velocity) / (time for the change)

Change in velocity = 59.43 m/s East

Time for the change = 0.312 s

Acceleration = 190.5 m/s^2 East

Two resistors, 2.50 Ω and 4.95 Ω, are wired in series to a 12.00 V battery. What is the equivalent resistance of the circuit?

Answers

Answer:

7.45 Ω

Explanation:

From the question given above, the following data were obtained:

Resistor 1 (R₁) = 2.50 Ω

Resistor 2 (R₂) = 4.95 Ω

Voltage (V) = 12 V

Equivalent Resistance (Rₑq) =?

Since the resistors are in series arrangement, the equivalent resistance can be obtained as follow:

Rₑq = R₁ + R₂

Rₑq = 2.5 + 4.95

Rₑq = 7.45 Ω

Therefore, the equivalent resistance is 7.45 Ω

The Doppler Effect is caused by which of the following?

Select all that apply…

A - motion of the source

B - the type of wave

C - original frequency of the source

D - motion of the observer

E - type of medium the wave is in

Answers

Answer:

the type of wave

Explanation:

Description: Doppler Effect works on both light and sound objects. For instance, when a sound object moves towards you, the frequency of the sound waves increases, leading to a higher pitch. Conversely, if it moves away from you, the frequency of the sound waves decreases and the pitch comes down.

A 20 g block of ice is cooled to −65 ◦C. It

is added to 570 g of water in an 76 g copper

calorimeter at a temperature of 26◦C.

Find the final temperature. The specific

heat of copper is 387 J/kg ·

◦C and of ice is

2090 J/kg ·

◦C . The latent heat of fusion of

water is 3.33 × 10^5

J/kg and its specific heat

is 4186 J/kg ·

◦C .

Answer in units of ◦C.

Answers

Answer:

The final temperature is approximately 23.55°C

Explanation:

The given parameters are;

The mass of the ice block, m₁ = 20 g

The initial temperature of the block, T₁ = -65°C

The mass of the water to which the block is added, m₂ = 570 g

The mass of the copper container containing the water, m₃ = 76 g

The initial temperature of the water and the copper, T₂ = 26°C

The specific heat capacity of copper, c₃ = 387 J/(kg·°C)

The specific heat capacity of ice, c₄ = 2,090 J/(kg·°C)

The latent heat of fusion of ice, l = 3.33 × 10⁵ J/kg

The specific heat capacity of water, c₁ = 4,186 J/(kg·°C)

We have;

ΔQ = m₁·c₁·ΔT + m₁·l = m₂·c₂·ΔT + m₃·c₃·ΔT

Therefore, we get;

20 × 2,090 × -65 +  20 × 3.33 × 10⁵ + 20 × T × 4,186  = 570 × 4,186 × (26 - T) + 76 × 387 × (26 - T)

Using a graphing calculator, we get;

83720·T + 3943000 = 62801232 - 2415432·T

The final temperature, T ≈ 23.55 °C

how fossils influence and change our understanding of the history of Earth and it's species.

Answers

Answer:

Fossils are the preserved remains or traces of animals, plants, and other organisms from the past. Fossils are important evidence for evolution because they show that life on earth was once different from life found on earth today.

Explanation:

Light waves are


A.rotating waves.
B.longitudinal waves.
C.circular waves.
D.transverse waves

Answers

SHOCKING

Explanation:

Answer:

D i promises.

Explanation:

light waves can go 2 direction

A meter is larger than a
A.
hectometer
B.
kilometer
C.
decimeter
D.
dekameter

Answers

I think the best answer is Decimeter

Which describes the motion in a convection current? horizontal motion only vertical motion only linear motion circular motion

Answers

Answer:

circular motion

Explanation:

Circular motion can be regarded as

movement of particular object along the circumference in a circle. It is

rotation of particular object along a circular path. Circular motion could be

uniform, along with constant angular rate of rotation as well as constant speed. It could also be non-uniform along with changing rate of rotation. The acceleration that is been experienced when one is in uniform circular motion is called"Centripetal acceleration"

Convection currents is type of current that takes place after a reservoir of fluid has been heated at the bottom, then cool at the top.the fluid expand as a result of Heat , then density decreases, the plates on top of them is been carried as a result of circular motion of the convection

A convention current is a circular movement which is set up due to temperature difference between two layers of a fluid.

What is a convection current?

A convention current is a movement which is set up due to temperature difference between two fluids.

Convection currents are set up in liquids and gases.

Hotter and less dense fluids move upwards while colder and denser fluids move downwards.

Therefore, convection currents involve circular motion.

Learn more about convection currents at: https://brainly.com/question/25957304

Waves that move through space are called

Answers

Answer:

Electromagnetic waves are waves that can travel through matter or through empty space

The half-life of technetium-99 is 6 hours.How much of a 100 milligram sample of
technetium-99 will remain after 30 hours? *
O 3.125 mg
O 12.5 mg
O 6.25 mg
O 1.56 mg

Answers

6.25 mg ...............

A mass weighing pounds is attached to a spring whose constant is lb/ft. The medium offers a damping force that is numerically equal to the instantaneous velocity. The mass is initially released from a point foot above the equilibrium position with a downward velocity of ft/s. Determine the time at which the mass passes through the equilibrium position. Find the time at which the mass attains its extreme displacement from the equilibrium position. What is the position of the mass at this instant

Answers

Answer:

hello your question has some missing values attached below is the complete question with the missing values

answer :

a) 0.083 secs

b) 0.33 secs

c)  3e^-4/3

Explanation:

Given that

g = 32 ft/s^2 ,  spring constant ( k ) = 2 Ib/ft

initial displacement = 1 ft above equilibrium

mass = weight / g = 4/32 = 1/8

damping force = instanteous velocity  hence  β = 1

a)Calculate the time at which the mass passes through the equilibrium position.

time mass passes through equilibrium = 1/12 seconds = 0.083

b) Calculate the time at which the mass attains its extreme displacement

time when mass attains extreme displacement = 1/3 seconds = 0.33 secs

c) What is the position of the mass at this instant

position = 3e^-4/3

attached below is the detailed solution to the given problem

All waves change speed when they enter a new medium, but they don't always bend. When does bending occur?

Answers

Bending occurs when one side of the wave enters the new medium before the other side of the wave. ... The bending occurs because the two sides of the wave are traveling at different speeds.

Which type of map best shows the three dimensions of Earth’s surface?

Answers

Answer:

please give me brainlist and follow

Explanation:

topographic map

A topographic map shows a three-dimensional representation of a flat surface. It has contour lines joining points of equal elevation; the closer the lines are the steeper the elevation is.

Define the types of friction and give FOUR examples of each
Static Friction
Rolling Friction
Sliding Friction
Fluid Friction

Answers

Static Friction is the force that keeps an object at rest
example: pushing against a heavy box but it isnt moving due to the weight of the box and gravity pulling it down

Rolling friction is a resistive force that slows down something thats rolling such as a ball or a wheel
example: a rolling soccer being slowed down from grass

Sliding Friction is the friction created from two object sliding against eachother, just like kinetic friction. It is intended to make the object stop
example: A sled sliding down a hill against snow

Fluid Friction is the force that resist motion in fluid or something moving around a fluid.
example: water pushing against a swimmer when swimming through it

Friction and air resistance are forces that always:


1.) Balance out, having no effect on the net force.

2.) Act in the opposite direction to an object's motion, tending to slow it down.

3.) Pull objects down towards the center of the Earth.

4.) Cause objects to speed up.

Answers

2 act in the opposite direction. To an objects motion, tending to slow it down

GIVING BRAINLIEST PLEASE HELP!!
-if you answer correctly ill give you brainliest which will give you 23pts-

Answers

Answer:

B is the answer!!

Explanation:

Three people push a piano on wheels with forces of 130 N to the right, 150 N to the left, and 165 N to the right. What is the strength and direction of the net force on the piano?

Answers

Answer:

45 N to the right possibly?

A 100 L ball is blown up inside at 200K. It is then taken outside in the hot sun, and the volume increases to 150 L. What is the new temperature?​

Answers

Answer:

Temperature, T2 = 300 Kelvin

Explanation:

Given the following data;

Initial volume = 100 Liters

Initial temperature = 200 Kelvin

Final volume = 150 Liters

To find the final temperature T2, we would use Charles' law.

Charles states that when the pressure of an ideal gas is kept constant, the volume of the gas is directly proportional to the absolute temperature of the gas.

Mathematically, Charles is given by;

[tex] \frac {V}{T} = K[/tex]

[tex] \frac{V1}{T1} = \frac{V2}{T2}[/tex]

Making T2 as the subject formula, we have;

[tex] T_{2}= \frac{V_{2}}{V_{1}} * T_{1}[/tex]

Substituting into the formula, we have;

[tex] T_{2}= \frac{150}{100} * 200[/tex]

[tex] T_{2}= 1.5 * 200 [/tex]

Temperature, T2 = 300 Kelvin

Does the eruption from a volcano represent force

Answers

Answer:

Yes, because of the force of gas exploding the volcano from pressure is a force.

Blackie, a cat whose mass is 6-kg, is napping on top of the refrigerator when he rolls over and fall. Blackie has a KE of 90-J just before he lands on his feet on the floor.

How tall is the refrigerator?

Answers

To answer this question, you need to understand the law of conservation of energy. Essentially, the law states that energy cannot be created or destroyed; it is always conserved.

Knowing this law, how can we answer this question? Well, let's look at what the question tells us. We know that Blackie was initially at the top of a refrigerator before rolling over and falling to the ground. At ground level, he only has Kinetic energy when he lands. Since we know that he started at the top of the fridge, we know that Blackie started off with potential gravitational energy.

That would make sense, right? Written out as an equation, it'd be:

[tex]U_{g}[/tex] = [tex]K_{E}[/tex]

This follows the law of conservation of energy, as all the potential gravitational energy is converted into Kinetic energy.

Now, we know what energies are converted. What can we do with it? Recall the equation of potential gravitational energy:

[tex]U_{g}[/tex] = [tex]F_{g}[/tex]∆H

[tex]U_{g}[/tex] = mg∆H

Do you see it now? ∆H is the distance that Blackie falls, and since Blackie jumps from the fridge to the ground, ∆H must be the height of the fridge!

Let's start solving for ∆H:

[tex]U_{g}[/tex] = [tex]K_{E}[/tex]

Substitute potential gravitational energy with our equation:

mg∆H = [tex]K_{E}[/tex]

We were given the value of Kinetic Energy:

mg∆H = 90

Isolate ∆H by dividing both sides by mg:

∆H = [tex]\frac{90}{mg}[/tex]

Input values for 'm' and 'g' (m is the mass of Blackie and g is Earth's acceleration)

∆H = [tex]\frac{90}{6*9.80}[/tex]

∆H = [tex]\frac{90}{58.8}[/tex]

∆H = 1.53

The refrigerator is 1.53 meters tall.

And that's it! Let me know if you need me to explain anything I did here.

- breezyツ

A 2.5m long steel piano wire has a diameter of 0.5cm how great is the tention in the wire if it stretches by 0.45cm when tightened taking the young's modulus to be 2.0×10^11 N/m^2

Answers

Answer:                 Their u go i found it their was about 3 pages i did not no what pages u had to do.

Explanation:

Static electricity is an excess of charge.
A. True
B. False

Answers

it is very true for reasons

Answer:

Its true

Explanation:

A baseball is thrown with a speed of 36 meters per second (m/s). What is the distance from the mound to home plate if the ball takes 0.5 seconds to leave the pitcher's hand and cross the plate? A-72 B-18 C-41 D-31 Help me out please

Answers

Answer:

d = 18 m

Explanation:

Given that,

The speed of a baseball, v = 36 m/s

We need to find the distance from the mound to home plate if the ball takes 0.5 seconds to leave the pitcher's hand and cross the plate.

Let the distance be d. We can find it using the formula,

Speed = distance/time

or

[tex]d=vt\\\\d=36\times 0.5\\\\d=18\ m[/tex]

So, the required distance is equal to 18 m.

An object is located 20.0 cm from a convex lens. The lens focuses light at a
distance of 10.0 cm. What is the image distance?

A. 6.67 cm
B. -6.67 cm
C. -20.0 cm
D. 20.0 cm

Answers

The Answer Is :  D. 20.0 cm

My Reason : These types of problems can all be solved using the lens or mirror equation.

1/20 +1/q= 1/10

q=20 cm

The image is formed behind the lens at 2f or the center of curvature.

It is real, inverted, and the same size as the object

The Answer Is: D. 20.0 cm

Explanation: I did the test :)

What do you call the shot that starts on the right side and continues through to the left
side for a right handed player?

Answers

Answer:

When a right-handed golfer’s tee shot curves to far to the left, the shot is described as a “hook.” This shot typically occurs when the club head moves across the ball from left to right, imparting side-spin on the ball

Give 1 real life example of a scenario that takes advantage of the inverse relationship between force and time when impulse is constant. Describe how it is an example of impulse and how force and time are involved.

Answers

Answer:

On real life example of a scenario that takes advantage of the inverse relationship between force and time when impulse is constant is when making a serve with a lawn tennis racket

How It is an example of impulse is that when a serve is made by moving the bat slowly, the lawn tennis player uses less force and the ball is in contact with the string for longer a period

When however, the lawn tennis player moves the racket faster, with the strings of the racket highly tensioned  he uses more force and the ball also spends less time on the racket to produce the same momentum

Explanation:

The impulse of a force, ΔP is given by the following formula;

ΔP = F × Δt

Where ΔP is constant, we have;

F ∝ 1/Δt

Therefore, for the same impulse, when the force is increased, the time of contact is decreases and vice versa.

A 5 kg ball is sitting on top of a hill. It has a Potential Energy of 6000J. What is the height of the ball?​

Answers

Explanation:

mass=5 kg

potential energy=6000j

height=?

Now

potential energy =m.g.h

or 6000=5*9.8*h

or 6000=49h

or 6000÷49=h

or h= 122.45m


Which of the following scenarios would result in an increase of kinetic
energy?*

A) An object at rest at a height of 10 meters
B) A car accelerating from 10 m/s to 20 m/s
C) A car coming to a stop

Answers

B) car accelerating from 10 to 20

Answer:

B) A car accelerating from 10 m/s to 20 m/s

Explanation:

I explained this yesterday.

Other Questions
Math question: Solve for y: 2x-y=3 Scott wants to put soil in his garden shown below. If soil comes in bags that fill 3 square yards each, how many bags of soil should Scott buy A manufacturer of potato chips would like to know whether its bag filling machine works correctly at the 434 gram setting. It is believed that the machine is underfilling the bags. A 9 bag sample had a mean of 431 grams with a variance of 144. A level of significance of 0.01 will be used. Assume the population distribution is approximately normal. Is there sufficient evidence to support the claim that the bags are underfilled Find the perimeter and the area of the polygon with the given vertices.T (2,7), U (2,9), V (5,9), W (5,7)The perimeter is __ units.The area is ___ square units. In Problems 10 and 11, a sequence is defined recursively. Write down the first five terms.10. a1=3; an=4-an-111. a1=1; a2=2; an=-1 *an-2 Select the contraction that completes the sentence.Mrs. Garcia _____ ready to give the spelling test.weren'twasn't What is 2+2 minus 32 multiplied by 438? is the answer a squareroot, yes or no? what is the domainof f(x)=4^x ) What is the circumference of the rim of a basketball hoop with a radius of 9 inches? First, multiply the radius by__ to get the diameter__ inches. Then, multiply the diameter by 3.14 (an approximation for 1) to get a circumference of about__ inches. ) Convince Me! If the diameter is doubled, what happens to the circumference? Explain. Omg can all these people with thefollow the link and youll see your answer like stop Im tired of yall not letting others help people someone help me ill mark you brainliest x Hi! Could You Help Me? - Pick A Scenario That You Believe Will Have The Greatest Impact On A Food Web In Your Local Ecosystem And Explain - PLEASEEEEEEEEEE HELPPPPPPPPPPPPP 800:2 in the simplest form Which graphed function is described by the given intervals? Increasing on (, 0) Decreasing on (0, ) A) A B) B C) C D) D Solve for x.109= -x + 267X=x 5? The company has just hired a new marketing manager who insists that unit sales can be dramatically increased by dropping the selling price from $8 to $7. The marketing manager would like to use the following projections in the budget: Data Year 2 Quarter Year 3 Quarter 1 2 3 4 1 2 Budgeted unit sales 45,000 70,000 120,000 75,000 80,000 90,000 Selling price per unit $7 Accounts receivable, beginning balance $65,000 Sales collected in the quarter sales are made 75% Sales collected in the quarter after sales are made 25% Desired ending finished goods inventory is 30% of the budgeted unit sales of the next quarter Finished goods inventory, beginning 12,000 units Raw materials required to produce one unit 5 pounds Desired ending inventory of raw materials is 10% of the next quarter's production needs Raw materials inventory, beginning 23,000 pounds Raw material costs $0.80 per pound Raw materials purchases are paid 60% in the quarter the purchases are made and 40% in the quarter following purchase Accounts payable for raw materials, beginning balance $81,500 A. What are the total expected cash collections for the year under this revised budget? B. What is the total required production for the year under this revised budget? C. What is the total cost of raw materials to be purchased for the year under this revised budget? D. What are the total expected cash disbursements for raw materials for the year under this revised budget? E. After seeing this revised budget, the production manager cautioned that due to the current production constraint, a complex milling machine, the plant can produce no more than 90,000 units in any one quarter. Is this a potential problem? PLEASE HELP! WILL GIVE BRAINLIEST!!!! Please help and thank you whoever you are what is 2 x 2? answer dumly