Rank the species below in order of decreasing leaving group capabilities in SN2 reactions (best leaving group to worst).
A. H2N-
B. CH3O-
C. C6H5SO3-
D. H2O
1. Best
2. Worst

Answer: In the reaction:

a) The reactants are: P

b) The products are: M and N

Explanation:

The given reaction equation is as follows.

[tex]P \rightarrow M + N[/tex]

Reactants are the species present on the left side on an arrow in a chemical reaction equation.

On the other hand, products are the species which are present on the right side of an arrow in a chemical reaction equation.

Hence, in the given reaction equation P is the reactant. Whereas M and N are the products.

Thus, we can conclude that in the reaction:

a) The reactants are: P

b) The products are: M and N

Answer:

7505.19 J

Explanation:

We'll begin by calculating the change in the temperature of copper. This can be obtained as follow:

Initial temperature (T₁) = 20 °C

Final temperature (T₂) = 875 °C

Change in temperature (ΔT) =?

ΔT = T₂ – T₁

ΔT = 875 – 20

ΔT = 855 °C

Finally, we shall determine the heat required. This can be obtained as follow:

Specific heat capacity (C) = 0.385 J/gºC

Change in temperature (ΔT) = 855 °C

Mass (M) = 22.8 g

Heat (Q) required =?

Q = MCΔT

Q = 22.8 × 0.385 × 855

Q = 7505.19 J

Thus, 7505.19 J of heat energy is required.

Answer:

Given total pressure of the gas mixture(hydrogen and helium) is 2.99 atm

Number of moles of hydrogen is ---- 13.2 mol

Number of moles of helium is ---- 19.1 mol

Determine the partial pressure of the helium gas.

Ratio of effusion rates of the two gases.

Explanation:

According to Dalton's law of partial pressures,

partial pressure of a component gas in a mixture is:

partial pressure of a gas = total pressure x mole fraction

mole fraction of helium gas is:

[tex]mole fraction of helium gas = \frac{number of moles of helium gas}{total number of mioles} \\=>mole fraction of He= \frac{19.1mol}{(19.1+13.2)mol} \\=>mole fraction of He = 0.591\\[/tex]

Partial pressure of He gas is:

[tex]Partial pressure of He =mole fraction of He * total pressure\\ =0.591 x 2.99atm\\ =1.77atm[/tex]

Effusion rate of a gas is inversely proportional to its square root of its molecular mass.

[tex]\frac{rate of effusion of H2 gas}{rate of effusion of He gas} =\sqrt{\frac{molar mass of He gas}{molar mass of H2 gas} } \\=> \frac{rate of effusion of H2 gas}{rate of effusion of He gas}=\sqrt{\frac{4g.}{2g} } \\=>\frac{rate of effusion of H2 gas}{rate of effusion of He gas}=1.414:1[/tex]

Hence, rates of effusion of H2:He is 1.414:1.

Answer:

[tex]m_{H_2O}=73.0gH_2O[/tex]

Explanation:

Hello there!

In this case, since the formation of water from hydrogen and oxygen is:

[tex]2H_2+O_2\rightarrow 2H_2O[/tex]

Whereas we find a 2:2 mole ratio of hydrogen to water. In such a way, by using the Avogadro's number, the aforementioned mole ratio and the molar mass of water (18.02 g/mol), we obtain the following grams of water product:

[tex]m_{H_2O}=2.44x10^{24}molec*\frac{1molH_2}{6.022x10^{23}molec}*\frac{2molH_2O}{2molH_2}*\frac{18.02gH_2O}{1molH_2O}\\\\ m_{H_2O}=73.0gH_2O[/tex]

Regards!

Answer:

d. 4 Al(s) + 3 O₂(g) → 2 Al₂O₃(s)

Explanation:

Aluminum metal reacts with oxygen gas in a combination reaction that forms a product that coats the metal preventing it from further oxidation: aluminum oxide. Aluminum is a cation with charge 3+ (Al³⁻) and oxide is an anion with charge 2- (O²⁻). Thus, the neutral compound aluminum oxide has the chemical formula Al₂O₃. The unbalanced chemical equation is:

Al(s) + O₂(g) → Al₂O₃(s)

We can balance using the trial and error method. First, we will balance O atoms by multiplying Al₂O₃ by 2 and O₂ by 3.

Al(s) + 3 O₂(g) → 2 Al₂O₃(s)

Finally, we get the balanced equation by multiplying Al by 4.

4 Al(s) + 3 O₂(g) → 2 Al₂O₃(s)

Answer:

CO is considered as a product.

Explanation:

A general chemical equation for a combination reaction follows:

To write a chemical equation, we must follow some of the rules:

The reactants must be written on the left side of the direction arrow.

A '+' sign is written between the reactants, when more than one reactants are present.

An arrow is added after all the reactants are written in the direction where reaction is taking place. Here, the reaction is taking place in forward direction.

The products must be written on the right side of the direction arrow.

A '+' sign is written between the products, when more than one products are present.

For the given chemical equation:

are the reactants in the reaction and  are the products in the reaction.

Hence, CO is considered as a product.

Answer:

Explanation:

[tex]E=h\nu=6.62606957 *10^{-34}\frac{Kg~m^2}{s}4.78*10^{14}\frac{1}{s}=316.7261*10^{-21}J[/tex]

C. Cancer that affects the blood

Hope I could help!

Answer:

The electrons will be added by the hydrogen.

Explanation:

If we fire a single electron towards the hydrogen atom, the hydrogen atoms added the electron to its shell by applying force of attraction and becomes stable as well as non reactive in nature because the hydrogen attains the electronic configuration of helium which is a noble gas and have completed its outermost shell. The proton that is present in the nucleus attracts this electron and compel it to add in the electron.

Answer:

greater, two, three

Explanation:

Cations are positively charged ions. In an octahedral complex, the d orbitals undergo greater repulsion and split into 2 high, and 3, low energy groups.

An octahedral complex is a molecular geometry of a compound in which the six atoms are aligned in symmetry around the central metal atom.

The molecule has eight faces and hence is called octa. The two d orbitals present in the structure experience greater repulsive force compared to the three orbitals of d orbit.

Therefore, the d orbit of the molecule has two high-energy orbitals while having three lower energy molecules.

Learn more metal cation here:

https://brainly.com/question/14225650

Answer:

aa

Explanation:

There is a lowercase a on both sides.

Answer:

The U.S government made such an investment because they're most likely to reduce harmful emissions.

Answer:

C

Explanation:

Answer:

C.

Explanation:

Brainiest?

my answer

Explanation:

Answer. Filtration is the method of separating a solid from a liquid. A sieve sets a threshold calibration through which all undersized materials pass through. Filtration differs from sieving, where separation occurs at a single perforated layer (a sieve).

Answer:

The hydride ion,H−is a stronger base, so it will abstract a proton from the water. As the water will give protons, so water will work as an acid and an acid-base reaction will take place. Hydride ions get protons from water and form hydrogen gas and hydroxide ions.

Sodium hydride is the chemical compound with the empirical formula NaH. This alkali metal hydride is primarily used as a strong yet combustible base in organic synthesis. NaH is a saline (salt-like) hydride, composed of Na+ and H− ions, in contrast to molecular hydrides such as borane, methane, ammonia, and water.

Answer:

The molecular equations are:

1. CuSO₄ (aq) + 2 KOH (aq) ----> Cu(OH)₂ (s) + K₂SO₄ (aq)

2. Ba(NO₃)₂ (aq) + K₂SO₄ (aq) + BaSO₄ (s) + 2 KNO₃ (aq)

The complete ionic equations are:

1. Ag + (aq) + NO₃- (aq) + I- (aq) + Na (aq) ---> AgI (s) + No₃- (aq) + Na+ (aq)

2. Cu²+ + SO₄²- (aq) + 2 K+ (aq) + 2 OH- (aq) ---> Cu(OH)₂ (s) + 2K+ (aq) + SO₄²- (aq)

The net ionic equations are:

1. Ca²+ (aq) + SO₄²- (aq) ---> CaSO₄ (s)

2. Ba²+ (aq) +SO₄²- (aq) ---> BaSO₄ (s)

Explanation:

A molecular equation is a balanced chemical equation which shows the reacting species as molecules rather than as componenet ions in their compounds with subscripts written beside the molecules to indicate the state in which they occur in the chemical reaction.

An ionic equation expresses the reacting species as components ions in a chemical reation. All the ions and molecules reacting are shown.

In a net ionic equation, the ions which remain in the ionic state also known as spectator ions are not written as part of the equation.

From the given attachment;

The molecular equations are:

1. CuSO₄ (aq) + 2 KOH (aq) ----> Cu(OH)₂ (s) + K₂SO₄ (aq)

2. Ba(NO₃)₂ (aq) + K₂SO₄ (aq) + BaSO₄ (s) + 2 KNO₃ (aq)

The complete ionic equations are:

1. Ag + (aq) + NO₃- (aq) + I- (aq) + Na (aq) ---> AgI (s) + No₃- (aq) + Na+ (aq)

2. Cu²+ + SO₄²- (aq) + 2 K+ (aq) + 2 OH- (aq) ---> Cu(OH)₂ (s) + 2K+ (aq) + SO₄²- (aq)

The net ionic equations are:

1. Ca²+ (aq) + SO₄²- (aq) ---> CaSO₄ (s)

2. Ba²+ (aq) +SO₄²- (aq) ---> BaSO₄ (s)

Answer:

0.016 M

Explanation:

Molarity refers to the molar concentration of a solution and it can be calculated using the formula below:

Molarity (M) = number of moles (n) ÷ volume (V)

According to this question, the mass of KCl was given to be 0.72 grams and the volume of water as 600 mL.

Using mole = mass/molar mass to convert mass of KCl to moles

Molar mass of KCl = 39 + 35.5 = 74.5g/mol

mole = 0.72g ÷ 74.5g/mol

mole = 0.00966mol

Volume of water = 600mL = 600/1000 = 0.600L

Molarity, M = 0.00966 ÷ 0.600

Molarity of KCl solution = 0.016 M

Answer:

32.1 g

Explanation:

3CaCl₂ + 2AlF₃ → 3CaF₂ + 2AlCl₃

First we convert 36.5 g of AlF₃ into moles, using its molar mass:

36.5 g ÷ 133.34 g/mol = 0.274 mol AlF₃

Then we convert 0.274 moles of AlF₃ into moles of CaF₂, using the stoichiometric coefficients of the reaction:

0.274 mol AlF₃ * [tex]\frac{3molCaF_2}{2molAlF_3}[/tex] = 0.411 mol CaF₂

Finally we convert 0.411 moles of CaF₂ into grams, using its molar mass:

0.411 mol * 78.07 g/mol = 32.1 g

Answer:

the value of H° is below -6535 kj. +6H2O

Explanation:

6H2O answer solved

For the given reaction, 2 moles of C₆H₆ the heat energy released is - 6535 KJ. Then, for 16 g of the compound or 0.205 moles needs 669.83 KJ of heat released in combustion.

Combustion is a chemical reaction that occurs between a fuel and an oxidizing agent, typically oxygen, resulting in the release of heat, light, and various combustion products, such as carbon dioxide and water vapor.

The process of combustion involves a rapid and exothermic (heat-releasing) oxidation reaction that produces a flame, which is visible in many cases.

Here, 2 moles of the hydrocarbon releases - 6535 KJ of energy.

molar mass of C₆H₆ = 78 g/mol

then no.of moles in 16 g = 16 /78 = 0.205 moles.

then energy released by 0.205 moles  = 0.205 moles × 6535 KJ /2 moles = 669.83 kJ

Therefore, the heat energy released by 16 g of the compound in combustion is 669.83 kJ.

Find more on combustion :

https://brainly.com/question/13153771

#SPJ2

Answer:

40.4 kJ

Explanation:

Step 1: Given data

Step 2: Calculate the moles corresponding to 55.0 g of CO₂

The molar mass of CO₂ is 44.01 g/mol.

n = 55.0 g × 1 mol/44.01 g = 1.25 mol

Step 3: Calculate the heat (Q) required to sublimate 1.25 moles of CO₂

We will use the following expression.

Q = n × ΔH°sub

Q = 1.25 mol × 32.3 kJ/mol = 40.4 kJ

Answer:

C2H4I2

Explanation:

Viscosity of a fluid has to do with the internal friction between the internal layers of the fluid.

Molecular weight is found to be related to the viscosity of a fluid even though the relationship may not be strictly linear.

However, the greater the molecular weight of a substance, the greater the viscosity of the material.

Since C2H4I2 has the greatest molecular weight (281.86 g/mol), it is also expected to display the greatest viscosity among all the compounds listed in the question.

Solution :

When the temperature is held constant at 300 K, we can use the Select mass slider in order to place the weights on the lid. And we record the pressure and also the volume of the gas for each of the added mass.

Added mass  on the lid       Total mass               Pressure             Volume

          0 kg                                10 kg                    98.1 [tex]N/m^2[/tex]         [tex]2.54 \ m^3[/tex]

          10 kg                               20 kg                   [tex]196.2 \ N/ m^2[/tex]          [tex]1.27 \ m^3[/tex]

          20 kg                              30 kg                   [tex]294.3 \ N/ m^2[/tex]          [tex]0.85 \ m^3[/tex]

          30 kg                               40 kg                   [tex]392.4 \ N/ m^2[/tex]          [tex]0.43 \ m^3[/tex]

As the pressure increases at a constant temperature, the volume of the gas decreases.

Thus we can see that the pressure is inversely proportional to the volume.          

Answer: hello your question is poorly written below is the complete question

answer:

For N1 :  sp³  orbital

For N2:  p orbital

For N3 : p orbital

For N4 : sp² orbital

For N5 : sp² orbital

Explanation:

Determining the type of orbital in which the lone pair on each N atom will reside.

From the configuration attached below we can determine the type of orbital and they are ;

For N1 :  sp³  orbital

For N2:  p orbital

For N3 : p orbital

For N4 : sp² orbital

For N5 : sp² orbital

Answer:

potentiol or kenetic

Explanation:

Answer:

the heat capacity of steam is 2.01 J/(g⋅∘C) and of ice is 2.09 J/(g⋅∘C). 1. See answer.

Answer:

If the colour of the indicator changes blue when a base is there and when it changes to red or pink or scarlet when it is acid. Then we can say that the indicator is working