Reaction of 2,3-dimethyl-1-butene with HBr leads to an alkyl bromide, C6H13Br. On treatment of this alkyl bromide with KOH in methanol, elimination of HBr occurs and a hydrocarbon that is isomeric with the starting alkene is formed. What is the structure of this hydrocarbon, and how do you think it is formed from the alkyl bromide

Answer:

The correct answer is 0.020 M.

Explanation:

To solve this problem, we can use the equation M1V1 = M2V2, where M represents the molarity of the solution and V represents the volume of solution.  Since we are given that the original solution is 50 mL and 0.40 M, these values are V1 and M1, respectively.  The solution after dilution has a volume of 1000 mL, so this value is V2.  We are solving for the molarity after dilution, which represents M2.

If we plug in the values specified above, we get the following:

M1V1 = M2V2

(0.40 M)(50.0 mL) = (M2)(1000.0 mL)

Solving for M2, we get:

M2 = 0.020 M

Notice that our answer has 2 significant figures because 0.40 has 2 significant figures, the least of any values given in the problem.

Therefore, the answer is 0.020 M.

Hope this helps!

Answer:

1st structure - Meso

2nd structure - Chiral

3rd structure - achiral

Explanation:

In the 1st structure there is nitrogen atom bonded with 4 different groups. It is Meso compound. In the second structure a carbon atom is attached with hydroxide molecule OH and has four different environment. It is Chiral compound. In the third structure no atom have different atom or group surrounding it. Therefore it is Achiral compound.

Answer:

M = 3.69 M.

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to calculate the molar concentration of the 1.29 moles of KCl in 350 mL of solution by recalling the mathematical definition of molarity as the division of the moles by the volume in liters, in this case 0.350 L; thus, we proceed as follows:

[tex]M=\frac{1.29mol}{0.350L}\\\\M=3.69M[/tex]

Which gives molar units, M, or just mol/L.

Regards!

3

And then for Fe it should be 4 and for the products it should be 2!!

Answer:

B porque si :) y eso Jsksjs

Answer:A

Because it's an amino acid and all amino acids are key to any part of your body.

Answer:

equal to zero is the right answer

Answer: The given electronic configuration is long hand notation.

Explanation:

Long-hand notation of representing electronic configuration is defined as the arrangement of total number of electrons that are present in an element.

Noble-gas notation of representing electronic configuration is defined as the arrangement of valence electrons in the element. The core electrons are represented as the previous noble gas of the element that is considered.

The given electronic configuration of potassium (K):  

The above configuration has all the electrons that are contained in the nucleus of an element. Thus, this configuration is a long-hand notation.

Answer:

It produces free energy.

Explanation:

Photosynthesis is a process which is used by the plant for producing energy in the form of ATP. This energy is used by the plants in different activities which enables the plant to grow and develop successfully. There are some factors which causes change in the rate of photosynthesis means the production of energy for the plant body. If the environmental factors are suitable, more energy is produced through the process of photosynthesis.

Answer:

the characteristics of ionic compounds are :

1.They form crystals.

2.They are hard and brittle.

Answer:

they form crystals.

they have high melting and boiling points.

they are hard and brittle.

they are good insulators.

when dissolve in water...they dissociate Into ions.

Explanation:

If 50.0 grams of Zinc are reacted with 50.0 grams of Hydrogen Chloride ... 50.09 Zn x 1 mol Zn , Imol ZnCl2 , 136.4g. ... If a decomposition reaction produces a 75.0% yield for the oxygen by mass (128.0 grams were.

Answer:

Chlorine gas reacts with potassium bromide to form potassium chloride in solution and liquid bromine.

Explanation:

The balanced equation of the chemical reaction is given below:

Cl2(g) + 2KBr(aq) → 2KCl(aq)+ Br2(l)

According to the above equation, it can be said that chlorine in its gaseous form (Cl2) reacts with pottasium bromide (reactants) to form pottasium chloride (KCl) and bromine, which is a liquid at room temperature.

Answer:

D: Chlorine gas reacts with potassium bromide to form potassium chloride in solution and liquid bromine.

Answer:

something that can be maintained over a period of time

Answer:

a balance between meeting today's needs.......

Explanation:

Answer:

Answer: There are 1.53 moles present in   molecules of water in a beaker.

Explanation:

According to the mole concept, there are  molecules present in 1 mole of a substance.

So, number of moles present in  molecules are calculated as follows.

Thus, we can conclude that there are 1.53 moles present in   molecules of water in a beaker.

Explanation:

Answer:

[tex]1 {s}^{2} 2 {s}^{2} 2 {p}^{4} [/tex]

OR

[tex]2 : 6[/tex]

Answer:

If we look at the ground state (electrons in the energetically lowest available orbital) of oxygen, the electron configuration is [tex]1s^{2} 2s^{2} 2p^{4}[/tex] . If the element were to become excited, the electron could occupy an infinite number of orbitals. However, in most texts, the example will be the next available one. So for oxygen, it might look like this:  [tex]1s^{2} 2s^{2} 2p^{3}3s^{1}[/tex]  - where the valence electron now occupies the 3s orbital in an excited (i.e. not ground) state.

So, the electron configuration of oxygen in its excited state​ is [tex]1s^{2} 2s^{2} 2p^{3}3s^{1}[/tex].

Answer:

m = 20.9 g.

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to solve this problem by recalling both the Avogadro's number for the calculation of the moles in the given molecules of calcium phosphate and the molar mass of this compound in order to secondly calculate the mass as shown on the following setup:

[tex]m=4.05x10^{22}molecules*\frac{1mol}{6.022x10^{23}}*\frac{310.18g}{1mol}\\\\m=20.9g[/tex]

Regards!

Answer:

Cuáles son las características de la luz y en qué consisten?

Explanation:

La luz es una radiación que se propaga en forma de ondas. Las ondas que se pueden propagar en el vacío se llaman ONDAS ELECTROMAGNÉTICAS. La luz es una radiación electromagnética

Answer:

Both reactions are acid-base reactions

Explanation:

An acid base reaction is a reaction that occurs between an acid and a base. This reaction often leads to the formation of a salt in the process. The nature of the salt depends on the type of acid and base that reacted in the process.

Both HNO3 and H2SO4 are strong acids. However, ammonia is a weak base. The acid base reaction between ammonia and these strong acids is shown below;

HNO3(aq) + NH3(aq) ------>NH4NO3(aq)

H2SO4(aq) + 2NH3(aq) ----> (NH4)2SO4(aq)

Answer:

10/3

Explanation:

Hope this helps

Answer:

The compound formula for the ammonia is

N

H

3

. It is a colorless gas. It is the result of the chemical reaction between nitrogen and hydrogen gas. The chemical reaction between the gases is shown below:

N

2

+

3

H

2

→

2

N

H

3

Answer:

[tex]1.74molNO_2[/tex]

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to perform mole-mass relationships by using the molar mass of the involved substance, in this case NO2, which is 46.0 g/mol; then we just set up a conversion factor like the one shown below:

[tex]80g*\frac{1mol}{46g}\\\\1.74molNO_2[/tex]

Regards!

Answer:

B

Explanation:

Answer:

Well, they are very durable unlike other packaging food materials, they can be recycled. But, the internet says allumninum cans are much better. and it could be better because you can keep the canned milk cool (cold) for a long lasting time. (keep it in the fridge if you want it to stay cold even longer)

Answer:

The given molecules are:

CH2Br2

CH3NH2

LiF

C3H8

CF4.

Which compound consists of the hydrogen bond as the strongest intermolecular force.

Explanation:

The hydrogen bond is the electrostatic force of attraction that exists between the covalently bonded H-atom of one molecule and a high electronegative atom (N, O, F) of another molecule.

For example, H-bonding in water is represented below:

Among the given molecules,

CH2Br2 does not have H-bond because there is no either N or O or F atom in it.

In LiF also there is no H-atom and no hydrogen bond.

C3H8 also does not have H-bond in it.

CF4 also does not have H-atom or hydrogen bond in it.

The answer is CH3NH2(methylamine).

It has an intermolecular hydrogen bond in it as shown in the attachment.

The dashed line represents the H-bond.

Explanation:

Do đó cấu hình electron của canxi là: 1s2 2s2 2p6 3s2 3p6 4s2.

Answer:

true

Explanation:

because an organism have many roles in food web

Answer:

Atmospheric water generator is used in regions that have scarcity of water or have polluted water. These generators are reliable sources of clean and safe water and hence reduces dependency on bottled water.

Atmospheric water generator extract water from the air (humid air) through condensation. Extracted water then cools down to temperature below its dew point  thereby producing potable drinking water.

Explanation:

Atmospheric water generator is used in regions that have scarcity of water or have polluted water. These generators are reliable sources of clean and safe water and hence reduces dependency on bottled water.

Atmospheric water generator extract water from the air (humid air) through condensation. Extracted water then cools down to temperature below its dew point  thereby producing potable drinking water.

Answer:

A device that collects water from humid ambient air is known as an atmospheric water generator. Condensation is the process of extracting water vapor from the air by chilling it below its dew point, exposing it to desiccants, or pressurizing it. An AWG, unlike a dehumidifier, is meant to make the water drinkable. Because there is nearly always a little amount of water in the air that may be collected, AWGs are useful in situations where clean drinking water is difficult or impossible to get. Cooling and desiccants are the two most common ways used.

Explanation:

Answer:

50% ISOPROPANOL / H2O - 1

25% ISOPROPANOL / H2O - 2

Pure water - 4

ISOPROPANOL / H2O - 3

Explanation:

More Isopropanol concentration is least polar. When the isopropanol is mixed with water its polarity increases. Pure water is most polar. The polarity of a substance is dependent on its ability to bent and mold in the shape as required.

From the question given above, the following data were obtained:

Oxygen = 45.2 Kg

Carbon = 12.6 Kg

Hydrogen = 7 Kg

Nitrogen = 2 Kg

Calcium = 1.3 Kg

Phosphorus = 0.78 Kg

Potassium = 0.25 Kg

Sulphur = 0.18 Kg

Others = 0.60 Kg

Total = 70 Kg

We can obtain the fraction of potassium of the mass of the body as follow:

Potassium = 0.25 Kg

Total = 70 Kg

Fraction of potassium = mass of potassium / Total

Fraction of potassium = 0.25 / 70

Therefore, the fraction of potassium in the body is 1/280

Learn more: https://brainly.com/question/14760859

Answer:

the Molecular formula will be; C10H14O

Explanation:

Given the data in the question;

Chrysanthenone is an unsaturated ketone,

it has M+ = 150 and contains 2 double bond(s) and 2 ring(s).

molecular formula = ?

we know that ketone contain 1 oxygen and mass of oxygen is 16

so mass of the C and H remaining will be;

⇒ 150 - 16 = 134

Now we determine the number of C atoms;

⇒ 134 / 13 = 10

hydrocarbon with 10 hydrogen atom have CnH2n+2 means

⇒ ( 10 × 2 ) +2 = 22 hydrogens

But then we have 3 unsaturation meaning 6 hydrogens less and also we have ring meaning 2 more hydrogens

⇒ 22 - 6 - 2 = 14

Hence the Molecular formula will be; C10H14O

Answer:

a. Na₃PO₄

b. NH₄Cl

c. FeCl₃

d. KClO₃

Explanation:

a. Sodium tetraoxophosphate(V) Na₃PO₄

3Na⁺ + PO₄³⁻ → Na₃PO₄

b. Ammonium Chloride NH₄Cl

NH₄⁺ + Cl⁻ → NH₄Cl

c. Iron(III)chloride

Fe³⁺ + Cl⁻ → FeCl₃

d. Potassium trioxochlorate(V) KClO₃

K⁺ + ClO₃⁻ → KClO₃

Answer:

1 Mole = 84.007 g/mol

Explanation:

Sodium bicarbonate (IUPAC name: sodium hydrogen carbonate), commonly known as baking soda or bicarbonate of soda, is a chemical compound with the formula NaHCO3